Printer ejects only not the paper printed. After print printer paper is sucked into the printer.

Similar Questions

• Filmmaker, not accepting only not the .mp4 files

  Filmmaker, not accepting only not the .mp4 files

  He can't stand not MP4 files that is why. You will need to convert to a format that it can charge

• Applications Windows XP Startup - Bug: the .exe file name only, not the full path

  Using Windows XP, run-msconfig-startup online online, only the name of the Executive file of the Applications that load and boot at startup are shown - this name sometimes not easily indicates he belongs as to which Application.
  Therefore, it becomes difficult to decide to uncheck (stop autoloading at startup) or not - unless the full path to its location is revealed. But this small window no poster not the full path - even if the mouse pointer is hovered over an entry in the list of applications.
  Third-party software (AnVir Task Manager Free) displayed the full path when the mouse pointer is moved to an entry.
  Microsoft should take the queue and improve this Service / installation / functionality, please.

  On my Windows XP, there is a 'Command' column / window for the start of the tab that displays the full path to the file.  If this column is not wide enough to show the entire path, place your cursor on the line that separates the column header in order for the column heading 'Image '.  The cursor turns into a line with arrows pointing to the left and right upright.  Click and hold the mouse button down and drag to the right.  The column will expand and a horizontal lift will open down to scroll all right.

  If this does not satisfy your needs, try the more technical version of msconfig Microsoft-"Autoruns".
  Autoruns:< http: technet.microsoft.com/en-us/sysinternals/bb963902="">
  HTH,
  -JW

• Making noise DVD player and not eject is not the disk

  Hello

  yesterday, my wife tried to play a CD in my Alienware X 51 but:

  1. the cd never played / appeared in Windows as an audio CD

  2. we can not eject it (with key or even a right click on the D drive.)

  I ran a diagnostic and received a hardware error:

  Error code 2000-0152

  Validation 113198

  Optical drive MsgL 0 - State Incorrect = 1 to registry 0020 error

  Sense information (02-0401)

  Everything is tested him ok.

  I tried to enter details in the support page, but apart from telling me I was out of warranty, I could all the details on the next steps.

  If the material is dead:

  1. can I buy a new one?

  2. How can I get the CD out?

  This is the error message on the support page:

  Critical problem detected

  Status: out of warranty

  Description of the problem:

  Error code:

  0152

  Validation code:

  113198

  Service Tag:

  #######

  Description of the failure:

  Optical drive connectivity problem.

  Alert message:

  SupportAssist has detected a faulty component on your system that requires immediate attention. Our records indicate that the hardware warranty and/or service contract (s) associated with this system has expired.

  Next steps:

  Dell provides repairs of high quality material for laptops Dell, tablets, desktops and all-in-one which is covered by a limited hardware warranty. For more information please click here.

  Hello

  Have you tried the button on the optical drive emergency eject to release the CD? If this does not work also, this means that the mechanical parts of the optic disc is also defective.

  Since you mentioned that you are now out of warranty and if you want to buy a new optical drive for your Alienware, you can call Dell to buy the optical drive for your Alienware.

• How to print the attachment only, not the content in an email using HP ePrint?

  By sending the attachment only, does that mean that nothing in the content of the e-mail and no line of subject?

  Hi FelixC,

  Welcome to the Forums of HP's Support. I understand that you prefer only attachment to prints by email by sending an e-mail to the e-mail address of your ePrint printer.

  My recommendation would be to follow the message with the subject, but have the body of the email blank. That would allow the setting to be the only thing printed as the subject line is not printed, whether it's content in the body of the email or not.

• Advisior segment showing only not USERS tablespace fregmented after you have moved the image

  All,
  
  OK, I did a simple test to see if the segment oracle Advisor will report whether the tablespace is fragmented or not.
  
  I had a tablespace USERS with about 9000 pictures and took about 2.2 GB in size. I created new tablespace to hold all the images and moved these images of USERS to my new tablespace. After that, I thought that my USERS will be very fregmented, because he settled on 2.2 GB of data. I ran Advisor segment on all areas of storage. However after viewing all DBA_Advisor views he didn't complain of the LOB segments of USERS tablespace.
  
  Am I missing something here?
  
  Thank you

  But still my USERS is fregemented correct?

  What metrics to what value quantifies the 'fragmentation '?

  How can I recover this wested space?

  The space is NOT wasted & there is nothing can be recovered.
  The vacant space will be reused when new data are inserted to the remaining users tablespace tables.

• Disk drive eject is not the disk

  When I put a disc in the disc drive on my touchsmart PC it does appear that I have a disk in there. When I try to eject it does not come out so I can't reach it. I really need the rear drive, but I can't get out. Help, please.

  Hello

  Have you tried paper clip method?

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Kind regards.

• Rendered in HTML, you see only not the &lt; b &gt; tags

  Hi guys... I need emergency here.  I have several paragraphs of text that uses the scrollBar component to give me an ability to scroll... this part works fine.  I have also the box "render text as html" checked because I have a current HTML formatting.  In any case, all of a sudden the published SWF file started to ignore the "BOLD" < b > tags.  It used to work fine.  Now, everywhere where I have the text surrounded by HTML < b > tags, it just fails that part of my copy once the file is published.  When I change the < strong > tags, the text comes back, but in a normal font... not in bold.

  I tried two ways... with the embedded fonts and without... nor made a difference with this problem.  I also tried the control box and uncheck the "render text as html" and that doesn't seem to make a difference. This "BOLD" tag is obsolete?  I have trouble getting a display in bold font.  The code is below.

  var stringWithHTML:String = ' < p > < b > The Dream Team: < /b > draw us from industry experts to meet the needs of our customers. Our dream team includes gurus of relations of media that will not be hung up, the creators that make creativity seems easy and brand enthusiasts ideas that stick. < /p > < br > < p > < b > Molly Lynch, < /b > self-proclaimed Jack of All Trades: with 10 years of experience in the field of communication, Molly has held positions at the top PR firms in the world, including in the world of Publicis, Ogilvy Public Relations and Weber Shandwick. Centers resort to real estate and fashion to dealers, Molly managed accounts in a variety of industries and is proud of his work on relations with impeccable customer, strong attention to the slightest detail and unyielding persistence. Molly has landed customers in countless of broadcast and media, including the Associated Press, CBS Early Show, Chicago Tribune, Newsweek, printed Cooking Light and Parenting magazine. She consults frequently with friends of the Agency in the city, including the CSC Grossman, reputation partners and MS & L.  "Follow Molly on Twitter at < a target ="_blank"href ="http://www.twitter.com/mollylynch"> < / p > '; '.
  aboutUsCopy_txt. htmlText = stringWithHTML;

  Thank you very much!

  You are welcome.

• Time Machine, you see only not the ssd internal

  Today, I had my old OWC replaced for a bigger Samsung 850 EVO SSD SSD internal flash drive.

  I named the new SSD, the same as the old.

  The new SSD is the boot disk and it works without problems.

  But now I see that Time Machine does not see this new SSD (he did see and save the old).

  This rather new Samsung SSD is not supported by Time Machine and therefore not show under the volumes available?

  I already tried the following Terminal command:

  : write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1

  But no success with that and in my case it is an interior volume, perhaps the command is wrong then?

  Or am I mistaking here and are the Time Machine preferences "Select disk" only discs showing where you can save to and not FROM (in the 'Options' section, you can exclude certain things and it shows the disc)?

• Want to copy and paste the names of files only, not the content

  I have organized hundreds of files in several folders of dozens and that you must first create a list or map of all files.  I want only the names of files, not other thing.  I found some freeware that seems designed to do this, but am reluctant to download.  Can it be done without additional software?  If I can't do the regular windows environment, someone suggest what software is the easiest to achieve?

  There are a lot of reliable freeware websites.  What program have you found, and this web site is on?

  To do the work of the normal Windows environment, click Start > all programs > Accessories > command prompt and enter these commands:

  CD /d "" path ".
  dir/b/s >"" file ".

  where:

  path = full path to the file
     file = name of the file to write

  For example, to create a list of files in My Documents and write it to a file named My Documents.txt :

  CD/d "C:\Documents and Settings\Utilisateur\Mes Documents"
  dir/b/s > "My Documents.txt."

  The /s parameter lists the files in the selected folder and all its subfolders.  The omit if you want just the files in the selected folder. Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows Media Player 11 see only not the files on the mp3 player

  Windows Media Player 11 shows all files (albums, songs) that are on my mp3 player.  She acknowledges that the 7 GB is used, but shows only a single album. Before this problem, he would show albums on the device that had been deleted. Is it possible to uninstall and reinstall WMP 11?  Alternatively, welcomed any other remedies.

  Thanks for all this.  It is now time for me to show the egg on my face.  I never noticed the "Refresh devices" button under the menu of synchronization.  It proved to be that simple, but not until I had spent all my elbow several times, installed a few unsatisfactory alternatives to WMP and visited I don't know how many sites looking for a response.  Pretty well, I came across the option "refresh devices."  Promotes perseverance, I guess.

• CD/DVD drive read only not the discs in Vista

  My CD/DVD read more records. I put in a disc and it does not detect either he (it's as if I was never to put a), or it takes forever to load. Also, I can't read game discs so I can't play my games. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Settings of plugin doesn't only not the way info.plist

  PhoneGap Build compiles a file ipa for me very well, but when trying to send to iTunes Connect via AppLoader I get this error:

  The following URL patterns in your application are not in the right format: [$DROPBOX_APP_KEY].  URL patterns to start with an alphabetic character and be

  compromise of alphanumeric characters, the time, the hyphen or sign only. Please see RFC1738 for more details.

  My config.xml file:

  < name of the plugin = "uk.co.cv - library.plugins.DropboxChooser" >

  < param name = "APP_ID" value = "[app_id]" / >

  < param name = "DROPBOX_APP_KEY" value = "db-[app_key]" / >

  < / plugin >

  Can any ideas on how I fix? TX!

  I noticed that the plugin.xml for the plugin is not declare the DROPBOX_APP_KEY or the APP_ID as preferences. Not positive, but maybe that's it.

  For an example of one that does, see the plugin to push.

• Adding a user to a role, you see only not the role permissions

  Hi all

  Simple question HERE and frustrating because it seems so easy... Oracle 11 G 64-bit (11.2.0.3) on Windows

  I created a role and a user as follows:

  CREATE USER TEST_USER
    IDENTIFIED BY <password>
    DEFAULT TABLESPACE USERS
    TEMPORARY TABLESPACE M_TEMP
    PROFILE DEFAULT
    ACCOUNT UNLOCK;
    -- 1 Role for TEST_USER 
    GRANT INTELLIWAVE TO TEST_USER;
    ALTER USER TEST_USER DEFAULT ROLE NONE;
    -- 1 System Privilege for TEST_USER 
    GRANT CREATE SESSION TO TEST_USER;
  

  The role is:

  CREATE ROLE INTELLIWAVE NOT IDENTIFIED;
  -- Object privileges granted to INTELLIWAVE
  GRANT SELECT ON SCHEMA1.ERROR_LOG TO INTELLIWAVE;
  -- Grantees of INTELLIWAVE
  GRANT INTELLIWAVE TO TEST_USER;
  GRANT INTELLIWAVE TO SYS WITH ADMIN OPTION;
  

  Now when I use the Toad and sign in using the TEST_USER user, I can connect fine but if I try to choose among this SCHEMA1. Table ERROR_LOG, reads table/view does not exist. And when I check the tree of the scheme under the scheme, I don't see this table under that user. It is there.

  What Miss me?

  Thanks in advance!

  It seems likely that the new role is not enabled in the session. Try

  SELECT * FROM SESSION_ROLES;

  While signed in as a user. The new role appears?

  I don't see EDIT USER by DEFAULT ALL ROLE; in your script CREATE USER.

  I don't see EDIT USER by DEFAULT ROLE INTELLIWAVE;

  For example, if the role is not one of the default roles for the user (via one of the above) then you will need to deliver the VALUE ROLE INTELLIWAVE. or the ROLE ALL VALUE; to access privileges granted to this role. The SET ROLE command affects only the current session.

• Files audio stereo plays only not on mono devices after rendering

  I have a stereo wav track recorded on a h5 zoom which is silent when played on a device that only play mono (most mobile devices). I've noticed that when I made and uploaded the video to YouTube and it plays fine on my PC but when I saw on my phone I got only the background music and audio interviews. I've scoured the web for similar problems, but nothing did. Someone must know how I can fix it. Here is a screenshot:

  

  As you can see, it's certainly a stereo file, but when it is made and posted on YouTube, mobile users have reported and I confirmed that the file is not playing. I've recreated the problem by making the video with mono sound and does not play the file. I must be missing something. Help, please! Thank you!

  There are several discussions in this forum about this, try this one:

  Re: Issue of Smartphone Audio