Disk drive eject is not the disk

Similar Questions

• CD-ROM/DVD-ROM drive ejects do not.

  Original title: DVD/CD ROM DRIVE

  CD-ROM/DVD-ROM drive ejects do not.

  Hello
  
  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?
  This could be if the DVD player does not work or drive DVD tray is stuck. Check if the DVD drive light flashes when you try to use it. If you see the light flashes, it means that the DVD drive tray is stuck in the opposite case it means that the DVD player has stopped working.
  If the DVD drive tray is stuck then, I suggest you to contact its manufacturer. They would help you with manual opening of the status bar.
  If the DVD player does not work then, please try the methods below.
  Method 1: Run auto Locksmiths and verify.
  Reference: http://support.microsoft.com/gp/hardware_device_problems
  Method 2: Look for a yellow or red fringe on the device for DVD player manager and send back the same.
  Reference: http://windows.microsoft.com/en-US/windows-vista/Open-Device-Manager

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite Pro L300: DVD drive eject does not & recognizes not all disks

  Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

  Please help someone,

  Thank you very much.

  What kind of help do you expect?

  You mean he s a software problem?

  I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

  The laptop seems to be is not very old, and I think that the guarantee must be valid
  How about you, communicating with ASP in your country and ask for a replacement WEIRD?

  I think this helps

• Making noise DVD player and not eject is not the disk

  Hello

  yesterday, my wife tried to play a CD in my Alienware X 51 but:

  1. the cd never played / appeared in Windows as an audio CD

  2. we can not eject it (with key or even a right click on the D drive.)

  I ran a diagnostic and received a hardware error:

  Error code 2000-0152

  Validation 113198

  Optical drive MsgL 0 - State Incorrect = 1 to registry 0020 error

  Sense information (02-0401)

  Everything is tested him ok.

  I tried to enter details in the support page, but apart from telling me I was out of warranty, I could all the details on the next steps.

  If the material is dead:

  1. can I buy a new one?

  2. How can I get the CD out?

  This is the error message on the support page:

  Critical problem detected

  Status: out of warranty

  Description of the problem:

  Error code:

  0152

  Validation code:

  113198

  Service Tag:

  #######

  Description of the failure:

  Optical drive connectivity problem.

  Alert message:

  SupportAssist has detected a faulty component on your system that requires immediate attention. Our records indicate that the hardware warranty and/or service contract (s) associated with this system has expired.

  Next steps:

  Dell provides repairs of high quality material for laptops Dell, tablets, desktops and all-in-one which is covered by a limited hardware warranty. For more information please click here.

  Hello

  Have you tried the button on the optical drive emergency eject to release the CD? If this does not work also, this means that the mechanical parts of the optic disc is also defective.

  Since you mentioned that you are now out of warranty and if you want to buy a new optical drive for your Alienware, you can call Dell to buy the optical drive for your Alienware.

• LG DVD-RAM drive read only not the disks in Windows 7

  Title pretty much sums up it...

  I installed 7 and it works great!  But if I didn't put in the drive to load on the system is not turn it up.  I can see the drive in my computer, but he still thinks that the CD1 of World of Warcraft's inside, but it doesn't have either turn this disc.

  I got a bunch of things off when installing (HyperTransport, IDE, floppy drive), should I turn all distributed and try to load it up, just to reactivate all later?  Or is there a known solution?  Exact model is the GH22NS30. AMD Athlon 64 x 2 processor Dual Core 5400 + Black Edition; Abit AN52 nForce 520 motherboard; OCZ SLI-Ready Edition 4 GB DDR2 (PC2 6400); Western Digital WD360GD 36 GB Raptor; Raptor 74 GB Western Digital WD740ADFD; LG GH22NS30 DVD - RAM drive. XfX GeForce 8800GT Alpha Dog Edition

  Hi Rustedbucket,

  Thanks for posting on the community forum is ready for Windows 7.

  Try to remove the filters from the registry, see if that helps with this problem.

  Be sure to back up the registry on external media before editing the registry.

  1. Click Start
     Collapse this includes this image

     

     type regedit in the Search box, and then click regedit in the programs list.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  3. In the pane, click UpperFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the UpperFilters registry entry.
  5. In the pane, click LowerFilters, and then click Remove.
  6. Click Yes to confirm the deletion of the LowerFilters registry entry.
  7. Exit the registry editor and restart the computer.

  Please let us know if that helps you or additional assistance is needed on this issue.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• driver Dell is not the problem of download is netframework 3.5

  Dear Sir, I am a hardware engineer

  Sir I am format dell inspiron 530 s system and istalled windows xp but audio driver is not istalled problem is 0101 codes

  so please Sir help me

  surajyadav,

  Have you installed the utility of desktop / laptop and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Rick

• CD/DVD drive read only not the discs in Vista

  My CD/DVD read more records. I put in a disc and it does not detect either he (it's as if I was never to put a), or it takes forever to load. Also, I can't read game discs so I can't play my games. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Need new hard drive, but have not the disks in Windows 7 OS

  Recently, I had some problems with my PC and was able to restore the factory settings.  Now it seems that my hard drive is bad and needs to be replaced.  I have a HP G71-449WM model, produces WA606UA.

  Will it also find Windows 7 OS disks somewhere?  I didn't need one when I did the restore to factory.

  It's the hard drive, which I intend to purchase:

  http://www.Amazon.com/Toshiba-5400rpm-replacement-G71-449WM-WA606UA/DP/B00JRLAYMW/ref=sr_1_2?s=elect...

  Hello

  First of all, the HARD drive in your link is fine, even if you can consider a slightly faster (7200 RPM) - for example, either of the drives on the following links would be very well for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 64 of your & Maintenance Guide.

  ***************************************************

  Regarding the reinstallation of the operating system on the new drive, there are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• DVD drive read only not the discs in Vista

  my dvd drive doesn't read any disk, yet the device manager says that the device works properly please help

  Hi Bill,

  Please see the following article some troubleshooting on your question:

  http://support.Microsoft.com/kb/982116

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Printer ejects only not the paper printed. After print printer paper is sucked into the printer.

  Printer: HP Officejet 6500 more

  OS: Windows 7

  Problem: The printer ejects not not paper after printing. Paper is sucked into the printer.

  Hello

  I suggest you do a hard reset with the printer.

  Hard Reset:

  Take out the toner cartridges.

  Unplug the power cord from the printer and the wall

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.

  When I try to backup Quicken, I received the error: cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.  My last backup of Quicken was 16/07/2010.  I don't know why I can't back up now.  Is there a way to fix this?

  Why not save to a folder on your hard drive and burn them to a CD - R from there? I can't tell from the little you wrote if the problem is with Quicken (not work or you have incorrectly backup location) or with your CD - RW drive. How about more details to work with? This will give you an idea of what to write:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• Re: Satellite C50D-A-13N - Optical Disk Drive eject malfunction of button

  Hello

  A bit of history; I took this laptop on behalf of my manager at work for the birthday of his son (tomorrow) and offered to set up for him. Unfortunately, the eject button on the DVD drive (and right click > eject in my computer) flashes the light and I can hear the spring trigger, but didn't actually eject the disc.

  However, it erases the memory disk in my computer (changes in office 2013 to the DVD player). I know because the paper clip trick works; I am able to insert a paper clip into the slot for manual release. As a result, I have proven that it can read the disks, it cannot simply eject.

  Here are the things I've tried various bandages around the web:
  -Tried to eject when booting
  -Uninstalled driver CD/DVD, auto-réinstaller at startup
  -Remove any software related to disk
  -Searched high and low for a pilot updated DVD without success.

  I came to the conclusion that the problem is hardware related instead of something to do with the software, everything is recognized fine, it's just the eject button that fail to work as expected.

  Then, because this kid's birthday is tomorrow, what I can do which does not send off for repair the machine?

  Thank you in advance!

  Hello

  If I understand the question; the eject button does not work properly, but you can eject the disc, insert the paper clip into the small hole near the eject button.
  Is this correct?

  Since there is no special software, which controls the eject button, looks like the related problem of material issue and I think that the only option to solve this problem is the replacement of CD/DVD drive.

• My CD drive E: suddenly lost the ability to write to DVD discs. He will write on CD disks

  My CD drive E: suddenly lost the ability to write to DVD discs. It will play the music on it and will write on CD disks. When I check the properties of the E: drive with a new DVD in place, it shows the whole disc in blue and indicates space used 0 and space free 0. MS it difficulty program reports the drive is not recognized as a recordable device.

  I used this drive often in the past to make backups, record music, etc. This who might I be missing or it's time for a new CD/DVD drive?

  Thanks for your help.

  I think you should use Nero. :-)

  I never use Windows for this function. Personally, I have had success with Acronis True Image, IMGBurn, CDBurnerXP and Avi2Dvd.

  But if you want to search for this, here's a start:

  http://www.Google.com/search?hl=en&source=HP&q=using+Windows+XP+to+burn+DVD&AQ=0&AQI=G1G-j2&aql=&OQ=using+Windows+XP+to+burn

  But I am happy to use the programs above, so I have nothing for you. :-)

  Good luck.

• I would like to replace my drive 160gig hard with the disk hard 320gig on my laptop running xp.

  I would like to replace my drive 160gig hard with the disk hard 320gig on my laptop running xp. Is it possible to transfer the exact content from one disk to another without having to re - install operating systems and programs etc. ?  I would that all is the same except the size of your hard drive will be increased.

  Is it possible to transfer the exact content from one disk to another without having to re - install operating systems and programs etc. ?

  Yes.

  You use the disk cloning software.  In some cases, a new player may even be bundled with software that will do this for you.

  Unless your laptop has a second drive Bay (most don't), you will also need an external hard drive enclosure.  As a general rule, these connect via the USB port, although if your laptop has a connector FireWire or eSATA you can also use these interfaces.

  You must select your external enclosure based on 3 criteria: the type of connection to the laptop. the physical size of the disc (2 1/2 inches for computer laptop drives); and player interface (determined by the connection of the internal drive of your laptop). For example only (no recommendation), if you wanted an enclosure for a 2.5 IDE drive "which connects using USB 2.0, Newegg has 17 products

  The (slightly) more expensive items among the software, you will need.  For example: http://www.newegg.com/Product/Product.aspx?Item=N82E16817155602 this particular House will work with SATA or IDE drives.

  If you buy an external enclosure that doesn't include cloning software, the software may be available for free from the manufacturer of the new 320 GB drive (e.g., http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal