Printer error 0x61011beb General

Similar Questions

• Printer error 0x610000f6 General on Photosmart all-in-one C309n

  Whenever I print, I get a general printer error on my HP Photosmart all-in-One Touch Smart C309n; the error number is the same every time: 0x610000f6.  I have to press OK on the screen of the printer to empty before printing again.  Sometimes it will show all the work until the error comes up, but other times it will bring up the error after the first page, and I have to turn it off to get the rest of the print job done.  Help, please!  Thank you!

  The code you get is normally caused by an ink system failure, but those who won't let you push OK to get in front of them. Your printhead may be out. The print head would be out of warranty now, as is the printer, so the only thing you can do is to try to clean the print head. The document following the link will take you through the steps of cleaning and aligning the print head. The place in the document that tells you the following steps are labeled step 4 and step 5 under Six Solution in the document. If the message continues to rise, you may need to physically clean the print head. The steps to do this are in a post from Bob_Headrick. She is tied below the document mentioned above.

  Print quality:
  http://goo.GL/dZvCV

  Bob_Headricks steps to physically clean the printhead:
  http://goo.GL/DfroJ

• Printer error 0x610000f6 General

  How can I fix "Général Printer Error 0x610000f6" for HP Photosmart Premium C309a of all-in-One?

  Hello

  this article seems to cover the kind of error you get. give the steps described a try and tell us if it helps.

  Good luck!

• Re: 0 X 610000f6 General printer error repeats

  I also have the same problem with the error code 0 x 610000f6. I have ink jet hp 7500 has any ideas how to fix this problem? After pressing the OK icon on the Panel it will print pages afew more until the error reappears
  Thank you for your time and help
  John2boy

  Hi @john2boy,

  Welcome to the HP Forums!

  I see you found the 0 X 610000f6 General printer error with your printer inkjet HP 7500 has. I'm happy to help you!

  Please, try the steps in this guide, 'print head problem' or 'Print head seems to be missing or damaged' displays. (Even if the title of the guide may not correspond to your question, I think that the solutions will help.)

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide helps!

• 8600 more general printer error

  I have a HP Officejet 8600.  I get a general Printer error.  No error code.  I turned off and unplugged the printer and then it switched on several times, but the error code remains.

  Product number: CN579A

  Serial number: {deleted private information}

  If the printer is under warranty I suggest you Contact HP for service.

  If this isn't the case, you could try to turn on the printer and then disconnect the external power supply (pull the plug) with the printer still on.  Wait a minute then reconnect power and try to power on.  This will make a more thorough reset procedure.

• Printer-b109n-z, windows XP "General printer error.

  Printer-b109n-z, Windows XP reports "General printer error" for print USB and wireless.

  Problem a few days with messages on paper without real inside jam jams. Turn off and unplug the unit (sometimes more than once) was the only solution.

  Now, with that 'the General printer error' message, turn off and unplug the unit do not more help. Is there a solution for this problem?

  In general, it is not that you can do to a "General printer error." This message indicates that there is more than one critical hardware error found inside the printer.

  You have already taken proactive action to do the steps to solve this problem: Power cycling of the printer. If you power cycle the printer, to restore the inner workings and the error is still present, then you need to replace the printer.

  Have you thought about contacting HP Technical Support and participating in the upgrade program?

• General HP 8600 printer error

  We bought this new printer to Costco for more than a year. He began to send me general error message just now. I have replacement cartridges in it (not factory HP) and they are full and not leaking. For some reason it won't print with them. I bought also a CISS system for it earlier and he gets the 'General error' message with him as well.
  I tried to reset and sometimes it works, it would reset (pull cable from the printer while the printer is turned on) it would show that the cartridges are full and he puts himself in 'cleaning up' and all of a sudden it gives me "General printer error" without specific code.
  I removed all the cartridges, and then I tried the following:

  I would setup Magenta cartridge and it would show me the rest of the cartridges are missing

  I'd install the Cyan cartridge, and it shows the rest of cartridges are missing

  I'd install black cartridge and it shows the rest of cartridges are missing

  If I install the yellow cartridge, it goes into "the General printer error.

  I wonder if it's a general malfunction with head of printing or something else?

  I called HP customer service, but they were less than helpful. Basically told me to reset it (by pulling on the cord) and see if it works, has not. HP person then proceeds to tell me how their printers are and asked me if I wanted to buy one! I was very anxious at this moment there, I spent several hundred dollars on this printer and I just want to make it work. Its a great printer - when it works.

  So I wanted to just update.  I didn't need printer for awhile until the end of last week and I decided to tinker with it even more.

  I researched still more and saw a video of someone rinse a print head in warm water under a sink. I decided to do as a last resort. After I rinsed, I dry real and reinstalled. I reinstalled cartridges installation and the test page printed printer. Ive printed several pages again later. I changed cartridges of the CISS system installation and printed a few pages to test and it works fine! Looks like it might have been just blocked and had to be rinsed.

  Printer works again and I hope to keep working for a long time. I was considering using it as a target shooting, perhaps at a later time, then

• HP Officejet Pro 8600-general printer error

  A sign on the printer came up to say that I had to fill two of the printer color cartridges.  I did, and then a message pops up saying that he had a problem with "ink system.  This was followed by a message that says General Printer Error "."

  I was advised to put off the printer, then unplug it, without success.

  I took the ink cartridges and repositioned them and put them back again without success.

  I contacted HP support, put my serial number and was informed that my warranty was expired.

  What do you suggest me?

  Hello Busyasabee,

  Welcome to the Forums of HP Support! I understand after having to change the cartridges on your HP Officejet Pro 8600, you now get a general print error "ink system.  I see that you have completed the troubleshooting steps base without success.

  I have a recommendation which is mine only and not that of HP, because your HP JO 8600 has a removable print head, you can try to rinse the print head. I had other members of the community to use this method and have been able to print correctly after.

  Now, the video, I send, suggest to buy their cleaning kit. This is not necessary, you can use water and SOAP. If you don't feel comfortable withdrawal and rinsing of the print head is ok, but it's the only other suggestion I have that the printer is out of warranty and troubleshooting of all has been done.

  See here:

• HP officejet 65000: how to remove the Error Message general 0x0000f6

  My printer has this General 0x0000f6 error and does not print

  Hello @MTeresaB,

  It is a great place to get help! I read your post and see that you are getting the error "0x0000f6." I want to help you solve this problem.

  "Please try the steps listed in this document to see if it can help with this error message: ' 0xc19a0005" or similar error screens.

  If you're still having problems, try this document: message 'Ink cartridge problem' on the product. Do not take into account the title.

  You use genuine HP cartridges?

  Please click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• HP Officejet Pro 8610: hp officejet 8610 printer error "Please stop your printer, and then click.

  When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.

  I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds.  Also this operation and in him plugging in several power strips and directly into the wall outlet.

  I was able to restore the default settings at one time.  This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.

  Hi @mrberad,

  Welcome to the Forums of HP Support!

  I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.

  I take a flashlight and look inside the obstruction.

  Use this guide to check obstructions:

  • Displays a Message 'Transport Jam'

  I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• using IMac and HP printer printer error code

  I have an IMac OSX Version 10.6.6 connected wireless through Airport Extreme for a HP Photosmart Premium Fax C309a Series.

  I am trying to print and get an 'Ink system failure' error code of "Oxc19a0025" on the small screen of the HP printer.

  The instructions on the printer display saying "turn printer off, then on.  I did this several times, but to no avail.  I also unplugged the printer and when I plug it in again, it evokes again the error message.

  I've never run into this problem before.   The power levels of ink on the screen of my Mac show adequate levels without warning 'Low Ink'.   The small screen HP printer won't lift a warning error and so I can't check the installer to see what levels that shows.

  I have verified that the Support Forum and the HP Mac website but can't seem to find anything about that.

  Question is what is the problem and how to fix it?

  Indeed, you will have an ink system error.  Generally, it is not because of your supplies, but the print head.

  Remove the supplies.  With the grey lever on the right of transport, remove and reposition the printhead Assembly.  Install the ink cartridges and try again.

• 709, the default printer error

  Hello!

  Windows 7 laptop Lenovo, Officejet 4500 connected by a LAN (not wireless) computer

  Test-Page work, works of Scanner, printer installed and working.

  Try to change the default printer to "Microsoft XPS Document Writer" to "HP508E0 (HP Officejet 4500 G510g-m)" using "Set as default printer" "Dvices and printer. Result: "operation could not be completed (error 0 x 00000709).» Double check the name of the printer and make sure that the printer is connected to the network. »

  The name of the printer that I cannot influence. So I can't see what to check.

  Printer prints, so I guess that the network connection is established.

  Watch HP Solution Center drivers etc are up to date.

  Windows troubleshooting utility suggests to set my default printer. But he also fails to do so without giving a reason.

  How to set my default printer HP4500?

  Thanks, best regards

  Michael

  Gordon!

  Thanks again for your efforts. Indeed, I managed to re - install printer drivers. And this time I had more luck, all three printers more XPS writer seems to work again. Unfortunately no change on the default printer, always RC = 0 x 709.

  While waiting for the installation procedure, I was searching Microsoft knowledge base and found one interesting article: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/unable-to-setup-default-printer-error-message/2e14443e-a829-4400-b155-5b87494b03ce?msgId=ab4e7395-e094-4205-91c3-7dfb644711bb&page=2

  Take care to proceed to the second page...

  The procedure described in this document has worked in my case: for each defined user to logon Windows I had to change an entry in the Windows registry manually:

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows

  Nota bene: first change the permissions for the key, and then change "Microsoft XPS Writer" to "HP Officejet 4500 G510g-m" in the value of the key field. All other parts of the field value has remained unchanged.

  The change is effective immediately, the default printer is now my HP4500. Test was successful!

  Well, I got the impression that this isn't a nuisance HP but a general limitation of Windows. From my experience, Linux and HPLIP seem much more convinient for the inexperienced user.

  See you soon

  Michael

• Printer error

  Unable to print, error: has no filter

  Mac mini mid 2011 8 GB of memory, 2 external SSD 1 1 TB for time machine backup drive.

  Also cannot restore to the end version that el Capitan in Time Machine the botou is not accessible?

  Try to reinstall your printer driver.

• Printing error: setcolorspace

  Hello

  I never had trouble printing to my office, but recently, I get a print error regardless of the document to print. I downloaded the latest driver from the website of the society of the printer to see if that would solve anything and it didn't.

  Printer: Kinoka Minolta bizhub c224e

  OS: OX X Yosimite 10.10.5

  ERROR: ioerror

  OFFENDING COMMAND: setcolorspace

  BATTERY:

  [/ CIEBasedABC - dictionary-]

  Any help is appreciated.

  If you haven't already done so, try to reset the printing system.

  OS X Mavericks: reset the printing system also of Yosemite

• I'm unable to print using firefox message is 'unknown printer error' no problems with other browsers

  I tried to print a coupon to an e-mail and the message I got was 'unknown printer error '. I am able to print from word and other items on my desktop as well as another browser. I can't print anything using Firefox. I have not updated recently, and the problem seems to have occurred spontaneously. Can help you.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  Make sure that you reset all the preferences for this printer.