printer error red stays on and won't scan or copy

Similar Questions

• HP 6700 suddenly won't scan or copy

  Help! M y wonderful and brand new HP Officejet 6700 suddenly won't scan or copy. I did change the ink cartridge, but think that he scanned and copied after that.  Can anyone help?  Thank you.

  Thanks, I'm glad it was useful.

  It would be beneficial that you could mark my previous post with the 'accept as Solution', like others in the community might more easily find this solution.

  Thank you.

• Suddenly, my 4215 all in one HP printer error message reads "remove and check right cartridge".

  My all-in-one 4215 printer suddenly flashes an error message on the screen saying "remove and check right cartridge"... For what I'm checking, it is unclear. I deleted and reinstalled the cartridge and it seems OK to me... It is not empty, and the last thing that he printed was fine... Help!

  I am betting that the printer or the ink cartridge contacts are dirty. This happens over time. The document below will guide you through cleaning the contacts. Let me know what happens.

  http://goo.GL/9oXc9

• Security certificate errors keep popping up and won't let me post photos and navigation very well in my computer.

  I need help to fully use my computer again. I'm not real big on this, as it is! THX.   Rick H. Medford Oregon.

  Hello

  1. What is the exact error message you get?

  2. where exactly do you get this error message?

  3. what web browser do you use?

  4. where and how you try to put the photo?

  5 did you last modified the software on the computer?

  If you are facing this problem in Internet explorer, so I suggest you to go through the steps mentioned in the link and the Coachman.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  http://support.Microsoft.com/kb/931850

  See also:

  About certificate errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/about-certificate-errors

  This link above applies to Windows XP as well.

• Can print, won't scan, no copy D110

  I used to be able to copy, but for some reason I can't now. HP D110. No error message, nothing. Everything comes back to the main screen when I try. I read some messages but nothing useful. I have wireless, I use a usb key, so the internet updates through my printer are impossible. How can I fix it? He used to work very well...

  I have to reset that I want to try.  I sent you a few steps via private Message. Here is a link that will show you how to use this forum feature if you're not familiar with it.
  
  How to send a private Message - video:
  http://h30434.www3.HP.com/T5/first-time-here-learn-how-to/how-to-send-A-private-message-video/TD-p/842013

• my dvd - r, says 4.7 GB, but my computer only shows 4.38 GB and won't let me copy a 4.5 GB file on it.

  I looked on the internet and I read that dvd - r 4.7 GB of storage space but another way to say that it is 4.38GiB (gibibyte). My problem is that when I try to copy a file of 4.5 GB (specifically, I'm trying to burn a dvd movie), the computer won't let me. the computer confuses the GiB with the Go? If so, how can I solve this problem?

  It is 4,707,000,000 bytes, i.e. 4 489 MB or 4.38 GB.

  4489 binary megabytes = binary 4,707,000,000 (about 4.7 gigabytes)

• Updates not configured correctly restore changes (stays on and will not shut down)

  When I turn on my computer laptop windows vista, the screen «updates not configured...» "stays on and won't. Seriously, I was sitting there for five hours, trying to make it disappear. I tried to reboot in safe mode, last known good configuration etc. I don't have a Windows Vista disc, but I really need all the files on the computer for school work. I'm sure you'll enjoy it, it's almost time review and I would be devastated to lose all my tickets!

  Any help would be great!

  Hey Joe Smith,

  What happened when you try to start in safe mode?

  Method 1
  I suggest to disconnect all external devices except the mouse and keyboard and check if you are able to boot to the desktop.

  Method 2
  You need Windows vista disk inorder to continue further troubleshooting. If you use a computer Original equipment manufacturer (OEM), I suggest you to contact the manufacturer of your computer for Windows Vista disc. Once you get the Windows Vista installation disc, you can try the steps from the following link.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

• Printer-b109n-z, windows XP "General printer error.

  Printer-b109n-z, Windows XP reports "General printer error" for print USB and wireless.

  Problem a few days with messages on paper without real inside jam jams. Turn off and unplug the unit (sometimes more than once) was the only solution.

  Now, with that 'the General printer error' message, turn off and unplug the unit do not more help. Is there a solution for this problem?

  In general, it is not that you can do to a "General printer error." This message indicates that there is more than one critical hardware error found inside the printer.

  You have already taken proactive action to do the steps to solve this problem: Power cycling of the printer. If you power cycle the printer, to restore the inner workings and the error is still present, then you need to replace the printer.

  Have you thought about contacting HP Technical Support and participating in the upgrade program?

• Got a new printer HP Officejet 4620 it won't stay on and it will not print

  Got a new printer HP Officejet 4620.  He won't and won't print!

  Hi, JaniceSeror,

  Have you had problems installing the printer?

  Go to control panel > printer folder

  Right-click on the printer, and then select open

  Do you see the documents waiting in the print queue?

  Click file > cancel all Documents

  Restart the computer

  Try printing again

  Select your Windows operating system from the list.  Download and install HP Print and Scan doctor for diagnostic purposes.  You will also find a Wizard Installer printer for Windows.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5191646#N518

• Photosmart 6510 "Printer Error" and all lights flash

  I have a 1.5 years, Photosmart 6510 B211a who works well. Now, all lights are flashing and or my USB connected PC (Win 7 Ultimate 64-bit), or my iPad or iPhone (OS 7) connected wireless will be printed.

  When the printer is turned on it goes as usual, wireless and power light stay on and displays correctly (Apps, Snapfish, Photo, copy, Scan), I can print from all devices.

  Symptoms:

  1. in ~ 5 minutes, no noise, all LEDs (displays the screen "Please turn printer then turn it on again."

  2 "(Printer Error is lit above screen, lights beside screen and power and wireless) starts to blink in unison"

  printer does not print

  3, every 10 seconds, a very low "short moan" noise, like something is trying to move inside the printer

  4. when power is cycled it will again be print normally for about 5 minutes and then stop again with flashing lights.

  Have you tried the following.

  1. hard reset (more than once - fired power and USB)

  2. uninstalled and reinstalled software and drivers

  For any help or suggestion will be appreciated.

  Possible solution

  I had the same problem when I moved the printer to a new PC. To end, I decided to change the USB port to which the printer is connected to. well, it worked! Printer now work correctly for wired operation and wireless.

  Not sure if I got a bad USB port or that the cable was not seated properly, or if the USB port had no authority to provide the connection to the printer.

  Hope this helps someont with this problem.

• My printer says... A printer error has occurred please turn power off and try again, nothing happens

  My printer an Epson SX300 on the screen it says a printer error has occurred, please turn off the printer, then press lap of. Refer to the documentation.

  But nothing in the documentation says anything about this problem. The printer is in a State of limbo, that nothing seems to be done. Help

  Hello

  This thread has been created in the Microsoft answers Site Feedback forum. the moderation of Microsoft team has moved this thread to the hardware and drivers Forum.

• HP LaserJet 4050: Error printing on HP Laserjet 4050 and 4100 Windows R2 2012

  We have recently migrated our Windows Server 2003 environment to Windows Server R2 2012.  Some of our printers, specifically HP Laserjet 4050 and 4100 no longer work with Server R2 2012, even if we downloaded the drivers for Windows R2 2012 from the Internet HP site and made sure the printer was using the new driver from HP.  When you try to print from the server or terminal connection, we get a "printing error" in the status field in the queue.  We do not know what to do to get these printers to print.  We have several of them and redirect users to print to another printer which is further so they can print.

  Do you have any suggestions?

  Best regards

  Paul

  If you cannot print from the server, then on the server, the parameters must be incorrect.  You can even ping the printers on the server?  Since you have more than 1 printer with this problem I doubt that all the printers hp all wrong.  Something else in the way that you configure these printers must be the issue.  If you can ping and also access the web server, then I think you have problems with active directory.  If you can not ping so perhaps have changed the ip addresses or the road you take these ip address has changed.

• Windows Search 4.0 and it gets to halfway through before adjourning an error and won't go any further

  I tried to install Windows Search 4.0 and it gets to halfway through before adjourning an error and won't go further.  What can I do?

  What is the exact error message you received?

  Make sure that all the latest updates and service packs are installed.

  If you have any previous version of Windows Desktop Search, remove from Add/Remove programs and try to reinstall.

  http://support.Microsoft.com/kb/940157

• HP Officejet Pro 8610: hp officejet 8610 printer error "Please stop your printer, and then click.

  When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.

  I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds.  Also this operation and in him plugging in several power strips and directly into the wall outlet.

  I was able to restore the default settings at one time.  This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.

  Hi @mrberad,

  Welcome to the Forums of HP Support!

  I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.

  I take a flashlight and look inside the obstruction.

  Use this guide to check obstructions:

  • Displays a Message 'Transport Jam'

  I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• I get an error everytime I try and print something

  Original title: does not print

  When I try and print in something else that word I get this error

  line - 2107

  1 - tank

  URL - res://ieframe.dll//preview.js

  who says unexpected call to method or property access.

  code - 0

  any help, thanks

  Hello

  Did you the latest changes on the system?

  Script error messages are displayed by Internet Explorer when there is a problem with the JavaScript or VBScript code on the Web site you are looking at.

  If the problem occurs when you try to print by using Internet Explorer, you can try the following steps and check.

  Method 1:

  a. click Start. Click run and type inetcpl.cpl , and then press on enter.

  b. click on the Advanced button. Go down to the Disable script debugging (Internet Explorer). Click inside the box to put a check mark in it.

  c. get off the box that says disable a notification of every script error. Click inside the box to remove the check mark.

  d. click apply and click the OK button. Restart Internet Explorer to check the issue.

  See also:

  How to resolve script errors in Internet Explorer on Windows computers

  Method 2:

  You can also read the following article and check if it helps.

  I can't print or preview before printing a Web page in Internet Explorer