HP 6700 suddenly won't scan or copy

Similar Questions

• printer error red stays on and won't scan or copy

  printer error red stays on and won't scan or copy. How to fix it. It's an epson stylus cx3200 all-in-one

  Epson help/support/FAQS, review its their device

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=14082&infoType=downloads&platform=OSF_W_7-32

• Suddenly won't scan hp 8600 function, and the hp Solution Center does not connect?

  I have been regularly using scanning, copying and printing to my HP 8600 printer features 4/1. All of a sudden when I click on the printer icon only functions of the printer are listed. When I click on the HP Solutions Center (which I have not had to do was s/u w / a previous printer) the message says: HP Solution Center cannot run b/c your device installation is not complete. PLS, connect the cable usb or re - run the Setup program from the installation to a network installation CD. If this does not work...

  I insert the CD, re-directed the s/u and nothing has changed. Please notify.

  HP 4/1 8600

  Windows 7

  I see that you have had previous HP products, Katharine. I'm glad to know that you have the software installed for the 8600 with success now.

  However, the center of Solution software you used with the previous units is more used to the 8600. The software installed for the 8600 should have placed an icon that resembles the printer with the name of the printer it labeling on your desktop. This icon opens the wizard of HP printer with options to control the printer.

  Good impression!

• Can print, won't scan, no copy D110

  I used to be able to copy, but for some reason I can't now. HP D110. No error message, nothing. Everything comes back to the main screen when I try. I read some messages but nothing useful. I have wireless, I use a usb key, so the internet updates through my printer are impossible. How can I fix it? He used to work very well...

  I have to reset that I want to try.  I sent you a few steps via private Message. Here is a link that will show you how to use this forum feature if you're not familiar with it.
  
  How to send a private Message - video:
  http://h30434.www3.HP.com/T5/first-time-here-learn-how-to/how-to-send-A-private-message-video/TD-p/842013

• HP8600 all-in-one - scan all of a sudden won't scan in color to my mac os 10.5.8.

  How to remedy?  THX!

  Hello
  The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab scan tasks.
  4. Select the affected shortcut and click on change... (or double-click on the shortcut).
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop-down next to the Mode
  7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.

  Kind regards
  Shlomi

• HP 4500 Envy: Just installed my hp envy 4500, it won't scan in color when you use the pdf document.

  I just installed my hp envy 4500 with software updated and everything. When I scanned a page of letter United States using Documents with text preset (through the control panel of the printer or my mac using Hp scanning application) it comes out only in black and white. The only color work is if I use the 'General purpose' preset, but the resulting dimensions of the scan above the 8.5 x 11 format.

  Ive tried to see if I can change a mode in the settings of scanning... I saw this earlier post to troubleshoot: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Envy-4500-won-t-scan-pdf-in-color/td-p/3970...

  but these instructions correspond to my HP utitliy application since there is no 'blue triangle' or drop-down menu next to the Mode of my Scanner... as well as an option to choose the color.

  Help would be greatly appreciated!

  Hi @jnicolem

  From your description, it seems that you need to change your scan tasks. You can change the scan tasks by following the steps below.

  Follow the instructions below.

  • HP utility open from the dock.

• Photosmart C5180 scanning and copy problem

  Scanning and copying service, computer and also the printer button produce entirely black (not empty) pages with lines vertical and horizontal of different shades of black.

  Uninstalled, reinstalled, used doctor scan, download software uptodate and the driver. What can I do else?

  Author: heborn

  Hello 11540.

  Try to reset the all-in-one (turn off and on again).

  Then try to copy using the control panel buttons, but open the scanner cover to see if the light is turn on. If this isn't the case, then I'm afraid this is a hardware failure and you will need the service unit.

  See you soon!

• 7640 5660 envy print, scan and copy in color, b & W and grey scale?

  Hello:

  The 7640 want 5660 print, scan and copy, color, B & W and grey scale?

  I was told that gray balance is not supported.   (I think this might be the wrong information.)

  What about FAX (7640)... B & W, color and Gray Scale?

  Thank you

  DaleBr

  Hi @DaleBr.

  Welcome to the Forums of HP's Support. The information you are looking for are under the specifications of the printer on hp.com.

  HP ENVY 7640 specifications

  HP ENVY 5660 specifications

  They can scan and copy in black and color only. There is no option to gray scale.

  I would like to know if these links worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• HP all in one c4180 "unable to scan or copy.

  Using Windows 7 and my HP C4180 not scan or copy and comes up with the message "unable to scan or copy.  This "all in one" used to work on my old computers using Vista and XP but will not now work on any of them.  (Also my very old OfficeJet G85 has also stopped working with a similar message from the scanner does not).  I downloaded from online new drivers for windows 7, but I still get the same message.  I tried uninstalling and reinstalling but still not good.  Someone out there who can help please?

  Hello Chrissygee

  In general, this error is associated with failure to scan. Scanner failure is a hardware problem and the printer will need maintenance.

  I suggest all initially following the article a 'Scanner failure' message on the all-in-one control panel and you can not scan, copy or fax .

  NOTE: the last part of article (three Solution) is a function of the printer. It has some links to the HP warranty check tool and warranty options.

  If the problem persists you must call technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.
  http://www.HP.com/cgi-bin/hpsupport/index.pl

• My 3.5.3 compressor suddenly won't let me choose submit - what can I do?

  My 3.5.3 compressor suddenly won't let me choose submit - what can I do?

  To begin with, try to run the Digital rebellion, compressor repair

  Post back and let us know if that fixes things.

  Russ

• Scan and copy quality - unwanted line

  I have a C7280 into one bought in late 2007, connected to a Mac running OSX 10.5.8. When I scan or copy using the document feeder, recently, I started to have a single, perfectly straight black line (not a streak or finger) on the left side of each page. This happens not when I use the scan or copy window, or when I print a document the computer off. I followed the solutions 1 and 2 in self-help customer service, but the problem remains. Please notify.

  Hello DB99

  Function of the printer, there is usually a bunch of small glass or a box in the ADF, sometimes it can be missed. If you can locate I would say clean it according to the instructions. Like the article I believe that you read indicated if Solution 1 and 2 does not work Solution 3 is that it should be repaired.

  Vertical stripes, lines or streaks on Copies, faxes or scan

• printer is not showing is not newly installed; color cartridges It prints well but not scan or copy

  I installed new color cartridges, but they do not appear as such in the display panel printer, which continue to save empty color cartridges.

  The printer test page was perfect.  However, the printer is neither scanner nor fax, nor can I access the installation options.

  Sorry you have a problem with scanning and copying after putting the new cartridge in the printer.

  What kind of printer you have?

  You can try to perform a hard reset on the printer. Unplug the power cord at the back of the printer. Leave for 30 seconds and plug it back.

  You can also clean the print head because it can read the contacts on the new cartridge wrong.

• OfficeJet 7310 stopped scanning or copying

  OfficeJet 7310

  Windows XP SP3.

  When you request a copy or scan, either from the computer or the façade, the machine displays 'don't warm up' ALL DAY and no scan or copy occurs. Fully operational for printing, however.

  It seems that the lamp lights or move

  Jotic Hi, sorry to hear that you're having this problem.

  Try this GO HERE to see if it can find any errors.

  Let me know the results you and I will do my best to help you.

  I hope this helps!

  RobertoR

  And remember↓

• C410a - problems with scanning and copying

  Recently bought a new computer (Windows 7 64-bit).  The old computer had the c410a Photosmart all-in-one installed and works without any problem.  PCMover to transfer files from the old computer to the new.  Had some problems at the beginning, but downloaded the drivers for the c410a and could do print from the computer.  However, it does not scan or copy.  I've uninstalled and reinstalled the software several times to drive and keep it for the same problem.

  If I try to scan or copy of the printer, I get an error message saying that I should try to scan/copy of the computer instead.  When I try to use the HP Solution Center, I get an error message that says: Hpqdirec.exe - system error - "the program can't start because libexpatw.dll is missing on your computer.  Try reinstalling the program to fix this program. "Then a second message appears that says Configuration ASF Broadcom -"system is busy and can not initialize.  Try again later. "As I said, I tried to reinstall the software that came with the printer several times and still get the same error messages.

  So, what don't get me?

  Any help is greatly appreciated.  Thank you very much.

  Well, I think that I thought about it.  When I reinstalled the software, I assumed that all software has been reinstalled.  But apparently, only the drivers were installed and not the HP Solution Center software.  Is returned on the disc, saw a button for installing additional software, and then installed the Solution Center and that seems to have solved the problem.