Printer gets the stop after the reboot of the machine.
I use windows 7 with a range of HP lj printers 1008. When I'm picking up my printer to computer not giving the impression but printer is in ready mode.
If I restart the Printer Spooler service is working. otherwise it's not take impressions of applications like MSOFFICE even test page also.
Please kindly give me the proper solution.
* Moved to Windows 7 forum category.
Hi Veerapalani,
Are you aware of any material changes or software on the PC before this problem?
I suggest you follow these methods and check if it helps.
Method 1:
Run the diagnostic tool.
Find and fix common printer problems using the tools of diagnosis HP for Windows
http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02073861
Method 2:
If this does not help, you can follow this article troubleshooting.
Solve a problem for the HP LaserJet P1008 printer
http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/troubleshootResults?sp4ts.Oid=3435686&AC.admitted=1394812725162.876444892.492883150
Let us know if it helps. If the problem persists, we will be happy to help you.
Tags: Windows
Similar Questions
-
Original title: try to add a printer, get error code OxOOOOO3e7, event log indicates block defective hard disk.
I have tried disk cleaner, no help
Hi 2012mike,
(1) what is the number of brand and model of your printer?
(2) what has been the result of chkdsk?
It is sufficient to indicate the complete error message you receive.
Please provide the details of the event logs.
Method 1: Run the fixit available in ink below
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox
Method 2: Clean boot the computer and then try to install the printer
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
Printer gets the job, but does not print the entire Page
When I try to print on my network from my laptop printer, the printer receives the job, but only print a tiny part of the page, leaving about 90% white. He does it everywhere where I launched a print of. Excel, Word, Web sites and pictures. All documents, it's the same thing. I'm guessing it's something simple, but since a few days I can't understand it. All of the suggestions.
Hi BobbyPhillips
1 can get you a preview of the page you print completely?
2. What is the brand and model of the printer?
The problem might be related to the printer settings. I suggest to get an overview of the page and check if the printer settings have been correctly configured. You can also check cartridge and any hardware problem associated with the printer.
I hope this helps.
-
Harder and harder to get the machine going. Below error messages.
My computer was becoming progressively more difficult and harder to go there every day. When I get an error code is as below. I do not always get one. Most of the time it will allow me to make the sign of the screen. However, after that it will freeze or restart at random times during the boot process. I was at a forum to find viruses, spyware or adaware and all unpleasant things. My machine was clean. So I guess I have another question. So, I'm here to ask for help with this error message. Thanks for your help to solve this problem.
C:\Windows\Minidump\Mini101310-03.dmpC:\Users\Rick\AppData\Local\Temp\WER-63726-0.SysData.XMLC:\Users\Rick\AppData\Local\Temp\WER2EEC.tmp.version.txtPAGE_FAULT_IN_NONPAGED_AREA (50) - invalid system memory was referenced.
http://msdn.Microsoft.com/en-us/library/ff559023 (vs.85) .aspx
Probably caused by: hardware
FAILURE_BUCKET_ID: IP_MISALIGNED_ataport. SYS
BUCKET_ID: IP_MISALIGNED _ataport. SYS
So, it seems that your RAM is damaged. Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors.
Also update the driver of the MACHINE:
Image path: \SystemRoot\system32\DRIVERS\GEARAspiWDM.sys
Image name: GEARAspiWDM.sys
Timestamp: Mon May 18 14:16:53 2009http://www.GearSoftware.com/support/drivers.php
André
[1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
[2] http://www.imgburn.com/index.php?act=download"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Epson Stylus CX9300F printer getting the error "paper is low or empty.
I just added my Epson Stylus CX9300F printer to my laptop Windows 7 (64-bit) and the resolution of the problems are saying that there is 'no paper' in the printer... I also use this printer with my Office Windows 10 (64 bit) - and it prints perfectly fine from this source.
Does anyone have any ideas as to why there is this error display "paper is low or empty" on the laptop?
Soon :)
Hello
I suggest you try it please add the printer manually:
Click "Start" > click "devices and printers".Click on "add a printer".Click "add a local printer.Click on "Create a new Port" > scroll down to "Standard TCP/IP Port" > click "next".Type the IP address of the printer and click "Next".
The printer must be found and use the USB driver that you have already installed, if the driver is not used you will need to add the driver.
I hope this helps! -
When I tried to print I got the message (please turn on the setting "enable bidirectional Communication" in the printer properties dialog box ") but I need to know how to do this.
On the start menu, menu on the side right should be a button devices and printers, which will bring you to the page printers. There you can find your printer and right click on it and select Properties. This would be the place to enable two-way communication, but beyond that, I can't help you as I don't know what would the Properties window for your printer.
-
Print spooler is corrupted after every reboot.
original title: corrupt Printer Spooler
I have huge problems with my spooler. I tried every fix I found on this site, and they work. Until my laptop is restarted, then Windows 7 seems to be obsessed with restore corrupted files. It seems he has programmed it to file backup that runs the joint. We have renamed the files, we ran all the scans here, we did things together of dependencies (which has never worked in a first time.) When I do the scans, it is said he found and repair corrupt files. Then I turn off my laptop. Turn it on, VOILA! Corrupted once more. I really don't want to, or don't I think I should have to, go through the trash whenever I want to print. I want a permanent solution, please.
Hello VxShady,
I lived the same problem and your last message gave me a few ideas, leading to the following solution worked for me.
- Open a with right click command prompt and use the option "run as Administrator".
- SFC can restore the version appropriate for spoolsv.exe, "sfc/scannow".
- Start the spooler service to confirm it works and set to start automatically.
- Open a Windows Explorer with the right-click and use the "Run as Administrator" option.
- Navigate to the Windows\System32 folder, right click on spoolsv.exe and choose the properties option.
- Check the read-only check box, and then click OK.
- Copy the file spoolsv.exe on the desktop for good measure.
- Reset.
The program or service that replace your file with a corrupted version spoolsv.exe should now be unable to crush them. For me, this solves the problem, and the spooler service starts automatically after reboot.
I hope it helps you too!
Best regards, Dave
-
Intel i7 CPU / 950 to 3.07 GHz / RAM 8 x 950 to 3.07 Ghz / Win7 Ultimate 64 bit / Asus P6T Deluxe V2 / ATI Radeon HD 5700 / 2 sets of 2 x Seagate 1 TB RAID 1 / 2 x Samsung Syncmaster P2350 / HL-DT-ST BD-RE BH08LS20.
Hello Jareili,
Thank you for your message. We will try to install this driver in a different way. Please, try the following:Click "Start" > select "devices and printers".Double-click on your "printer" > double click on "customize your printer.Select the "Advanced" tab > click on "new Driver".Click on "Next" > click "Have Disk" > navigate to the location of the 64-bit driver you downloaded from Canon.After that your driver is loaded, a test to see if everything is working properly. Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Print spooler has stopped. I rebooted and still cannot print.
I have two printers connected to this computer and cannot print on one or the other. have restarted the spooler several times, tried to reload the driver disk and without success.
Hello
What is the brand and model of your printer?
Microsoft has an automatic convenience store to find and correct the mistakes of the printer. To download and run the automatic troubleshooting utility, visit the following link, and then click
"Run now" button and follow the instructions in the wizard to run the tool.Problems printing and printing errors:
http://support.Microsoft.com/GP/printing_problemsPost back with the results, so that we can help you further.
Kind regards
Afzal Taher-Microsoft Support.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Print spooler keeps stopping after Windows updates
Keeps logging print spooler, it seems that every time there is an update to Windows. Is there a fix.
Hello
1 how long have you been faced with this problem?
2 do you have you can any hardware/software changes to your computer before this problem?This can happen if there is printer drivers are corrupt.
I suggest that you remove all of the installed printers and reinstall Windows 7 printer drivers.
Delete a printer:
a. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
b. find the printers installed icons, then delete them.
c. right-click on the blank part of the window and choose "run as administrator"->"Server properties".
d. on the tab drivers , select them printers list and click the Remove button. Please, select Remove driver and driver package.
e. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
f. try to remove all related printer software.Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
How can I make the printer get the wireless signal?
1 Microsoft do not have printers - so it would not be my first option to ask in the forums to help MS.
2. we have even less likely to help when you do not tell us what printer, what operating system, what router wi - fi or anything!
I suggest that you follow the instructions in your printer manual, with operating instructions of your wi - fi router to work things out. You should connect the printer via a cable to the wireless installation.
If stuck try the support forums on the Web site of the manufacturer of the printer with the forums on the website of the manufacturer of the router.
-
I have Windows XP on another system. When we started, we had a blue screen with the above error codes. I tried to restart and boot into safe mode and safe mode with command prompt, but right after that I chose the option of start, blue screen error reappears with this code. How can I get the machine to start so I can run a virus scan or restore?
a google search showed this article http://support.microsoft.com/kb/324103
You can try to boot in the recovery of a XP cd console.
-
Hello
I'm Italian, sorry for my bad English translation!
I have a HP OfficeJet 6700 Premium (e-print AiO) working out Mac OSX 10.9.1 Mavericks and connected to my MacBook Pro by ETH RJ45 wireless router.
I've written the next did not with Mac OS x 10.6.8 Snow Leopard.
I often use a special paper with the sticker from the postage label. The paper size is (l) 153mm (h) x 297mm. I set the special size in the layout with a new parameter.
Now, when I print the page by Illustrator or other SWs, the printer show me on the LCD the following alert: "the printer cannot print because the page size is different by size of page checked sensors!"
But if I set the printer layout in A5 format, the printer get the impression quite rightly!
Can someone help me?
Thank you
Salvatore (tothus)
Hi tothus aka late.
I understand your photos that you use Airprint to install the software and drivers and you need to use the HP software.
Add the printer to the system preferences, print and Scan
- Click on the Apple icon > System Preferences > print and scan.
- Click on the small symbol.
- Select Add another printer or Scanner
4. Select the printer you are adding and next to the 'use' to choose the printer driver. You will find Airprint is selected by default, click Airprint to open the drop-down list and choose your driver.
You should now have the HP software installed.
I sincerely hope this helped. Please let me know how it goes for you.
Kind regards
-
Officejet 5610 starts slow printing and button / stop flashes
This just started happening. A document (no matter what I print) will begin to print, get the first two lines printed and then take incredibly slow. Meanwhile, the power LED flashes and the message says "print...". "If I restart my computer and as you turn the printer power on and off, it will correct itself. Anyone else have this or know what to do? Thank you
Looks like the printer can be connected to a surge protector and the surge protector can not provide the stream of electricity the printer needs since it starts then slows down and the power LED flashes.
The printer is connected to a surge protector? If so, plug it directly into a wall socket. If it's related to the surge, the question shouldn't be present.
Let me know what happens.
-
Authentication of the machine and 802. 1 x
I'm trying to get the machines to authenticate against active directory using 802.1 x. It works fine when I use PEAP and CHAP authentication. Works like a dream, no problems at all. But I need to check that the machine is a part of the domain, the user will have to sign later anyway. It is important that our machines are checked as part of Active Directory, and then authenticate the port to pass traffic.
I followed all the documentation to get this working, I'm looking for is something of undocumented who does this work for others.
Any help would be greatly appreciated.
Thank you
Mitch
I assume that you have configured AD to automatically enroll for certificates Machines and the machines each have a computer certificate?
You have enabled remote access to machines (AD users & computers, enable remote access or using the remote access policy?)
Others that I had no problems setting this up.
If you want to enable computer-only authentication then you must edit the registry (or lower the changes through Group Policy):
[quote]
Activate computer-only authentication using the registry
To set up authentication computer only through the registry, all Windows-based wireless clients must have the value of the following registry value:
HKEY_LOCAL_MACHINE\Software\Microsoft\EAPOL\Parameters\General\Global\AuthMode = 2
With the AuthMode setting set to 2, only computer authentication is attempted. User authentication is never attempted.
To add this registry setting on all of your computers running Windows, you can use the following tools:
? Regini.exe from the Windows 2000 Server Resource Kit tools
? The Windows Server 2003 Resource Kit Tools reg.exe
In both cases, you create a script file which is read by the tool add a registry setting. The tool must be run in the security context of a local administrator account.
Alternatively, you can use network management software to change the settings of the registry on the managed computers. [/ quote]
http://www.Microsoft.com/technet/prodtechnol/winxppro/deploy/ed80211.mspx
Maybe you are looking for
-
Satellite A300 - cannot access the Internet more
I would like to re - open this thread because I am facing a similar problem.I have a Toshiba Satellite A300 and I installed Windwos 7 two months ago. Yesterday, his suddenly, my laptop could not access the internet more, but the wireless lan connecti
-
IMac was on but in the sleep when had power cut. After feeding back immediately tried to start over, but I just black screen that could hear the startup chime, and hear the work of the machine. In collaboration with el captain. I have mouse and wirel
-
Open the waveform array Vi object reference
Hi, I would like to change a property of an indicator in a VI of VI another (in particular I want to erase a waveform graph), I used Open VI object reference, but I'm not able to access the data in the history. How can I do?
-
HOW TO MOVE THE FLAGS IN MICROSOFT MAP POINT 2013
HOW TO MOVE THE FLAGS IN MICROSOFT MAP POINT 2013
-
I have performed a clean installation of Windows 7 and get an update error #8024A 006. I ran chkdsk /r and sfc/scannow times from an elevated command prompt. No command returned an error. Can someone help me with this please?