Printer HP 2605dn offline with Windows 7

Similar Questions

• HP Photosmart D110 printer will not install with Windows Vista?

  HP Photosmart D110 printer will not install with Windows Vista?

  Hello

  (1) what happens when you try to install the printer?

  (2) you get an error message?

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  You might want to know

  Add or remove a printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All-in-one 968 printer won't work with Windows 8

  I got the XPS 8500 last week.  After hours of trying to figure out the new operating system, I tried to connect my AO 968.  Nothing prints.  I tried to implement everything.  The printer appear in devices and printers, and he says it's working properly.  My eye!  When a driver will be ready for it?

  Hi Lynnt2,

  The 968 AIO printer is not compatible with windows OS 8.

  Please click here to check the compatibility of printers. http://Dell.to/UMzvYJ

• Can I use the same printer to print from a pc with windows 10 and a pc with windows 7

  * O.t. - printer using windows 7 and 10

  Can I use the same printer to print from a pc with windows 10 and a pc with windows 7?

  Yes, assuming that there is the compatible drivers for both versions of the OS.

• Printer HP deskjet 6940 with Windows 7 problem

  I have a HP Deskjet 6940 printer that doesn't work with my Windows 7. This can be corrected?

  Hello

  You will have to install the software of the printer that is compatible with Windows 7.

  Go here - http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=468003&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=468001 and choose the version of Windows 7 you have.

  Once you have done this, you should see the instructions and be able to get the software needed for your Deskjet 6940.

  Let me know how you go.

  Good luck and enjoy Windows 7
  Jon

  If this message was useful and allowed, please consider the vote and it offers as a response...

  My Blog - www.insidetheregistry.com

• Canon S820Printer my printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full.

  My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print.  Ink tanks are full.  What bad past and how to fix it?

  If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783

  - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8844
  If all goes well.

• I used Print artist 4.02 with Windows 98 but does not work in Windows 7

  I have a copy of the Platinum 4.02 artist Print.  It worked with windows 98.  Now, I have Window 7 Home Premium and get an error when I try to download the program.  What can I do to make this program loaded on my system? P

  Artist is up to version 24...

  Nothing below Print artist 22 is NOT compatibible with Windows 7.

  You need to upgrade to the latest version...

  http://www.PRINTARTIST.com/

• The printer does not work with windows 7

  Just bought a Samsung R480 today and discovered that my existing printer is not compatible with it. The Setup disk only works with Windows XP and Vista. Samsung R480 running Windows 7 at the moment.  I was also considering changing my desktop computer for Windows 7 as well.

  So my question is, is it possible to request an another HP installation cd that is compatible with Windows 7? Or I have to buy a new printer that is compatible with Windows 7?

  Thank you!

  The link below should show the selection of OS for the drivers of J4680c. just click on what version of Windows 7 you have (32-bit or 64-bit), then download it the driver full of features.

  Pilot J4680C

• Set up a wireless HP all-in-one printer on your desktop with Windows XP Pro Version 5.1 SP3

  Recently, I uninstalled Solution Center HP from my desktop PC with Windows XP Pro Version 5.1 SP3.  The program worked very well and was connected wireless to my HP Photosmart all-in-One 309 g.

  Now, when I downloaded the latest software feature full HP and installed, it has completed the installation but could not connect to the wireless printer.  Setting up the wireless printer, he did 'see' the HP 309 g printer and I chose this but it gave me a dialog box saying that there was no installation configuration.  I also, tried the control panel "Add Hardware", but he couldn't 'find' the printer.  What should I do?

  You have an icon for the 309 g Photosmart in Start menu > printers and faxes?

  If so, right-click on it, select Properties, and click the Ports tab.
  By ensuring NOT to click inside the list, use the scroll bar on the right until you see the line highlighted and verified with the port used for this printer.  That said this line in the columns 'Port' and 'Description '?

  Note that you may need to click and drag on the small vertical line between 'Port' and 'Description' in the header line to make the column wide enough to read the entire entry.

  Click Cancel to exit the printer properties dialog box.

• How to make the printer deskjet 3940 compatible with Windows 7 Home Basic, 32-bit?

  I have the HP Deskjet 3940 printer. I recently bought a Lenovo (C320, 57-302429) desktop computer that has Windows 7 home basic, 32-bit operating system. The said printer does not work with the computer above. Please guide how to make this printer compatible with the operating system above.

  1. click on the Start button, select Control Panel and double-click devices and printers.

  2. click on Add a printer.

  3. Select Add a local printer.

  4. Select an existing Local USBx port, click Next.

  5. click on the Windows Update button.

  6. once the update is complete, locate the 3940 driver.

  7. click on Next,Next,Next,Next,Finish

• Printer does not work with Windows Vista

  My HP Deskjet2540 all in one printer will print with windows vista. Ive tried printing from excel, works and all I get is a blank sheet. Sometimes I get some very weak marks. I have a lot of ink, I uninstalled and reinstalled only to get the same result. However, I can print something on the internet and I can print a test page. I get no error message.

  Hi cat22,

  Thank you for visiting the Forums from the HP Support! I see when you print from Excel to your HP Deskjet 2540 printing comes empty or with very weak lines. You have a lot of ink, and you have no problem printing from other programs. You tried to uninstall and reinstall the software without success.

  I would like to first you attempt to change the quality setting, you can have currently set to normal, we will try to print in optimized mode and see if that helps:

  1. go to your Start Menu

  2. go to your devices and printers

  3. right click on your DJ 2540 and navigate to Printing Preferences

  4. click on the paper/quality tab

  5. Select the best mode

  6. click on apply

  Now try printing from Excel, you still get blank pages? Please let me know the results if you are still running into errors let me the following information:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected USB printer or wireless?

  3. are there any exceptional computer upgrades that have not been installed?

  I hope hear from you soon.

• Intuit quicken does not print the black font with Windows 8.1

  When I print the reports from Quicken 2008 on my HP 4500 Wireless printer, only major titles that have shadows and text print.  (the red numbers can also print in red).  Reports printing OK on another printer. This issue was raised only since I changed my computer and operating system went from Vista to Windows 8.1.

  Other assignments you suggest to download another driver, but is there other drivers that are compatible with 8.1?

  Hi Toronto61,

  Thank you for your answer!

  Certainly there is software and drivers available, located on this Web site. Driver and software of HP Officejet full feature.

  Before installing I would recommend to uninstall snack, there are still old software on the computer. Uninstalling the printer software.

  Then I would clean the computer starts. How to perform a boot in Windowsand to use the printer HP install wizard for Windows. If the printer HP install wizard for Windows does not then download software driver full of features with the first link I provided.

  I hope this helps!

• Dell 942 all-in-one inkjet printer has stopped working with windows 8.1

  Printer drivers are installed. When you try to print the document doesn't seem to be in Quebec, then disappears.  Windows says it's not compatible, but I was able to scan documents. Any help would be appreciated!

  ozmoses,

  8.1 Windows comes with Internet Explorer 11. I hope that the original version is up and running. Windows Update comes from Internet Explorer 11 for Windows 7 and 8, and it has caused problems of print spooler. We found that removing IE11 and going back to IE 10 or an earlier version has solved this problem. Something you can't do with Windows 8. Unless there was an update to Internet Explorer is the last month or two that you can remove, issues of print spooler will perform until Microsoft releases an update.

  Rick

• HP 5150 does not print mode quick project with Windows 7

  Bought a new HP Pavilion dv7 computer with Windows 7.  I guess it comes with the print driver for my HP deskjet 5150 printer, because I can print but it will not print as fast.  Printing choices have always been best, Normal, fast, normal and quick project.  I still see the same choices, but it seems to print in Normal mode, even when I choose the project quickly.  I tried to uninstall the printer driver and reinstallation of HP, but that doesn't seem to work.  Any suggestions would be greatly appreciated.

  Thank you

  Minda

  There could be a few different things hang up the communication.  Follow the steps described in this document , and it should clear up everything.  Let me know what happens.

• Canon BJC-50 printer and scanner work with Windows 7?

  I have a printer Canon BJC-50 with the cartridge scanner.  I ordered a USB to parallel cable adapter must be able to connect to my laptop, because I do not have a parallel port.  The Windows 7 compatibility page says that this printer is compatible with Windows 7.  Canon said that it is not.

  Has anyone successfully connected and used a Canon BJC-50 with Windows 7?  If so, were there any problems?

  HI - same issue with Canon BJC-80. Says Windows is compatible and Cannon did not write! My BJC-80 prints OK with a USB/parallel cable and install via Windows 7 OK - but printer response time is in minutes to hit a comand "Print" in any program, for example. MS Word 2010?

  Suppose that we are victims of the creep of technology and need to buy a new printer - shame I have heaps of cartridges left!