Printer HP 4280 very slow when printing on the web
I'm using XP and my HP 4280 printer works fine except when I try to print anything on the web. It immediately goes to the stone but takes several minutes before it starts.
Hello
Try download and install the last commands from the link provided below and check if it helps. Also try to run diagnostic utility.
Also refer to:
Tags: Windows
Similar Questions
-
IE11 is very slow when opened if the Acrobat toolbar is enabled.
I reloaded the operating system on a new hard drive and reinstalled Adobe Acrobat XI. The employee uses the toolbar that allows you to convert web page to PDF. If the toolbar is active, internet explore will go up immediately, but will not display anything in the view, the settings options are grayed out, and I am unable to do a right click to toggle toolbars. There is no other toolbars. Usually after 45 seconds, the web page is in place and things are normal. Disable the acrobat toolbar and close the browser and it appears right in less than a second. How can I keep activated and there not take so long for the browser completely invent?
Hi justinh33055105,
Try this:-disable the Enhanced Protected Mode, follow these steps:
- Start Internet Explorer to the desktop.
- Press or click on tools and then tap or click on Internet options.
- On the Advanced tab, clear the check box enable the Protected Mode for Enhanced Security.
- Press or click OK.
Note You must restart your browser for this setting to take effect.
Now, try to reproduce the problem.
Let me know how it goes.
Kind regards
Nicos
-
Hello
I bought the latest samsung computer (notebook 9) three weeks ago. My laptop is very slow when I go on the internet. I have three other phones in my house and they all work very well. Is there any configuration that I should look because the guy told me that it is all the pre-configured.
Thank you
original title: network connection
Hello Pierre,.
I suggest that you look at this article from Microsoft that can help solve a slow internet connection: -
15 - ac151dx: wifi very slow when unplugged from charger
Hello
I have a new laptop of HP 15-ac151dx. Right out of the box, I noticed that the company becomes exteremly slow when I unplug the charger. As soon as I plug in the charger, the speed is very good. It works fine on a wired connection with the charger plugged in or unplugged.
So far, I tried the following, and nothing worked:
1. turn off the laptop, to reset the router, turn on laptop
2. remove the checkmark beside: ALLOW the COMPUTER TO TURN THIS DEVICE OFF SAVE tab managemnt Realtek RTL8188EE wifi power adapter. I also didi this on Realtek PCIe FE Family Controller.
3. went in the settings of advanced and equal "battery power" parameter settings "plugged in."
4. Rinse the DNS
5 reset the TCP/IP stack
6 driver adapter wifi update to 2023.18.814.2015 to 2023.27.1230.2015
7. update of Windows Ran
8. check the BIOS for power management setting, but can't find anything
9 exchanged the laptop - always have the same question.
Are there other settings that can I can check? Looks like a setting simple power management, I'm missing somewhere.
Thank you very much. In fact, it's a driver problem. I have done the following:
1 restore BIOS to factory settings
2 uninstall the WLAN driver
3. scan for hardware changes in the action menu in the Manager of devic
4 reboot
5 HP Recovery Manager--> reinstall WLAN drivers
6 reboot
7. HP support--> latest install Web site drivers WLAN
-
I am a rookie to computors - I can't print from the web with xp - at the start of firefox there is no buttons above the address bar if no button give or anyhthing - help please
Thank you
You can start printing via the keyboard using {Ctrl + P}.
-
I can't print from the Web all else prints OK the printer throws a simple sheet of paper and print preview is empty
This has happened
Each time Firefox opened
is about six weeks
I have reset the Print_print_printer option, again, it may not print. My printer is listed in the parameter in the config files...
He worked until this last update...
What will try now?
-
I have no gun toolbar so I can not print from the Web on my printer
I have a multi-imprimante MG5120 cannon and when on Firefox, the only thing that prints on the web is both border date, not the body of everything that I try to print, as an email or an article online. I am running XP and I have the Canon on IE toolbar.
I discovered that I was running of IE7, so I upgraded to IE8 and the print function is very well now.
-
Question
I can't set up defined page before printing.
I'll file to all pages that comes very close up and tabs Format & Options and margins, headers/footers.
Here is the entire depth... running above the bottom. I can't put footers. I can't print from the webWhen I go to preview before printing I get a totally gray screen
See this:
http://KB.mozillazine.org/Problems_printing_web_pages -
Microsoft Office (Word, Excel, Outlook) and printer slow when connected to the network, but quickly when not. with windwos vista, I have reintall the operating system, but still the same. Environment Network (Win server)
Hello
Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Windows Vista IT Pro Technet Forums network.
http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/
I hope this helps.
-
Unable to print from the web?
I can print my documents, but you cannot print from the web.
Not sure if this has anything to do with a recent update on my pc on the Bluetooth... but other than that have had the printer for a while and no problem at all.
So totally flumixed. I made the print and scan that says everything is fine and prints a page of test without any problem. But if I go on the web and try to print anything, it will not work.
I have windows 7 and use chrome for web
Any suggestions? Thank you
Thank you very much for this information.
Yes, if you can print from Internet Explorer, but not Google Chrome, there is an issue with Chrome. You can try to uninstall Google Chrome on your computer. Please follow this document here.
Now you can install Google Chrome on your computer by following this document here. When you print a Web page, press Ctrl + P on your keyboard. You will be able to get an overview of the page, set printer and base page settings prior to printing. Please follow this document here to help you. Make sure that the destination is set to your printer (4500 envy). If this is not the case, and then click Modify.
Please post your results again!
-
All that print from the web doing in the HTML code. I use the family XP Edition version
All that print from the web doing in the html code. I use the family XP Edition version. I'm almost on my home computer so I don't know when it happened first. Try to print the boarding card. Help.
Thank you
Hi GordonHarris,
· You use Internet Explorer? If so, what version of Internet Explorer?
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow these steps:
(a) click Start, Control Panel, Add and remove programs.
(b) click on set program access and defaults, select custom, select Internet Explorer as your web browser by default.
(c) click OK.
Method 2: Follow the steps in the article, if you are using Internet Explorer.
I can't print or preview before printing a Web page in Internet Explorer
-
HP Photosmart C4780: I try to print from the web
I try to print from the web. When I click on the ePrint icon and choose web web page, that I have already printed is still there. I don't know how to remove it so I can print the new page.
Accept as a solution.
-
Printer only prints on the web
have a photosmart 7660 and it prints on the web, but not from Notepad or any other type of doc's... all I get is a blank page. already removed the printer drivers and reinstalled get them the same results
Hello
1. don't you make changes to the printer settings?
2. how the printer is connected to the computer? It is located on a network or locally connected?
3. what kind of documents, you cannot print?
4. do you get an error message when you try to print from Notepad?Method 1.
For troubleshooting steps and an automatic fix for common problems of printer in Windows, see the Microsoft web page at the following address:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsMethod 2.
Check if the compensation print job helps.
Reference:
How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP
http://support.Microsoft.com/kb/946737Method 3.
Also, you can refer to the methods and other links listed in the articles below and check.
You cannot print documents after upgrade to Windows XP
http://support.Microsoft.com/kb/315325Resources for the resolution of the printer in Windows XP problems
http://support.Microsoft.com/kb/308028I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Cannot print locally OfficeJet Pro 8610, but I can print via the web service
Hello
I just installed a Pro OfficeJet 8610 with downloaded installation. I found my printer on the wireless LAN and it connected. I can't print anything from my Windows 8 HP laptop! I print from Word (or anywhere) and I said filled, but nothing prints. I can even see him spool printing, and it seems he's going through, but nothing prints. I even tried a direct USB connection with the same problem.
However, I can print from the web using the ePrint (send to the printer), but it's not practical.
It is a weird problem.
I had a friend connect using their computer and it worked (wireless) and I can even print from my iPhone locally.
This indicates that the HP laptop - I deleted the printer, reinstalled the drivers, ran all windows updates, reboted (computer and printer) several times and the same problem persists.
Please help - very frustrated and ready to return the stupid printer.
Hello
Please, try the following steps and let me know if that can help you:
- In the Control Panel, select uninstall a program and uninstall the rated HP OfficeJet Pro 8610 base driver software.
- Click the R keys on your keyboard and the Windows Logo appears in the Run dialog box.
- Spool type and click OK.
- Open the Drivers folder, and then select the x 64 folder if you have a 64-bit OS or the w32x86 if you have a 32 bit OS
Note: visit http://whatsmyos.com/ to find your type of operating system if necessary. - Open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
- Finally, reinstall the software and try to print.
Shlomi
-
I have a work of Illustrator I want to put on a Web site, which would be registered in? also, it's A2 How can I reduce to the web so that the image is not distorted? and when it's done how do I watermark it so if someone wants to print from the web is useless? I'm a novice at this.
Hi Alan,
Sue moved you here...? You answered my questions for the most part.
As Jacob and I have said so when you are in Illustrator and you have your work open, select file > save for Web...
From there, you will see a new window opens and you can choose your type of file (png-24/jpeg) quality, you want to be saved to and size too...
See how you go.
Maybe you are looking for
-
What is the use of the error, the web console, notebook, console
-
Want DV6-7304ee: order the DVD of recovery
My recovery partition has been changed by Ubuntu who hid all the files of windows 8. I have raised this issue in the forum and advised him to make a recovery DVD. However, I can't order it via the page of drivers for my model that is WANT DV6-7304ee.
-
Hello... I'm zolie... I want to design the generating function to two channels, but I have no idea built channel... can u help me... It's my block diagram...
-
Connect my e-mail yahoo for Outlook Express for Windows XP
I followed the instructions in the wizard, but when I start Outlook, it evokes a box that says: "enter network password". In this box, it lists my server as being: pop.mail.yahoo.com. It then lists my user name (which is OK for yahoo), then he asks f
-
LATITUDE DE820 wiped out loaded XP drivers DELL &; SW, no access to the network
Everyone out there - I need HELP... I bought a second hand LATITUDE DE820 with Windows 7 above and it worked fine (also WIFI). I need to load XP Prof on it (Yes...) and therefore all DELL SW disappeared (had no CD DELL) that I loaded package XP 3 Ser