Printer HP Photosmart B110a don't printe after wash trade

Similar Questions

• Photosmart C3140: Don't scan after update to the Mavericks on Mac

  After updating my Mac to the Mavericks, now my printer not scan.  It will print, however. But when I try to scan, I get this error message:

  Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps: start the program again. Close all programs that might be using the device. Restart the computer.

  I did everything above. I have also turned off the printer and unplugged for a few minutes. I rebooted several times. Thanks for any help you can offer!

  Hello

  Thanks for your help. I have a successful solution of Apple that I wanted to share with other people who may have this problem - it involves an impression through the preferences system, a bit bulky but not too expensive:

  Go to system preferences

  Printers, Scanners &

  Choose Scan from Print/Scan above the name of the printer

  Open scanner

  In the dialog box that appears:

  Make sure that "scan to" say where you want to be saved, otherwise you can not know where TI saved.

  Press Scan.

  (If the dialog box opens to the top immediately, please be patient.)

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...

• have photosmart b110a and after the update, it will not print or scan to my office

  have recently bought photosmart b110a and connected wireless for desktop (windows xp) and laptop (windows 7), but after an update is, it prints from the desktop - have deleted the software but left driver installed to try to remedy the situation and made the restoration of the system

  Hi there caleso,

  This is probably a software bug somewhere lets try to download and print and scan running doctor located here:
  http://support.HP.com/us-en/document/c03275041

  It can fix its own much and if not to give a better idea of what is happening.

  Good luck!

• Photosmart B110a does not print another property

  I replaced the cartridges of color with authentic products on my Photosmart B110a.  Until then it worked perfectly.  Now it prints shocking images of color in pastels.  Does not print black which is 3/4 full.  I use a Mac.  I powered by printing, computer, uninstalled and reinstalled and still no luck.

  Test pages print works and the colors appear.  I cleaned the print heads.  I have re-aligned heads too.  Help, please!

  Hi Deelesley, don't know what fixed it but glad to hear it of good feeling back for you.

  FYI, if you have problems again the link below has a lot of support documents & troubleshooting for PS b110a

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4022343&CC=IE&DLC=en&LC=en&product=4022343&tmp_track_link=ot_search

  Ciara

• Photosmart B110A black does not print

  Hi, I have a photosmart B110A and black stopped printing.  Was working fine before this problem.

  A lot of ink but I have replace the cartridge with a new one and same problem.  A ran all alignment head cleaning tests, etc. Reinstall the cartridge.  Clean the vent on the top of the cartridge.  Powered on.  Still nothing.

  Is there a solution to this problem?

  Hi Ciara

  Thank you very much, this seems to have solved the problem.  Although I have consumed a lot of ink there are now no remains in the cartridges that I will need to replace before I can be 100%

  Thanks again

• HP photosmart B110a: change in router, need to change the IP Address of the printer.

  I have a HP photosmart B110a and Windows vista.

  Previous using of my router, I put a static IP address.

  Now, I have a new router and I can not change the IP address of the printer.

  I've already tried

  Factory reset the printer (IP address does not change)

  Turn off/on router/Printer PC

  Type IP address of the printer to the current address in the browser (the page does not exist)

  Connection USB and USB current running to the wireless program that generated the following message "the PC and the printer are connected to different networks (192.168.1.0 and 192.168.0.0).  They must be connected to the same network.

  My Network Setup page shows that I am connected to the identifier SSID is correct

  IP 192.168.0.19

  Subnet mask 255.255.255.0

  Default gateway 192.168.0.1

  Really need help, thanks, George

  Run the wizard from the front panel wireless configuration, then set it to DHCP Auto IP printer.

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• HP Photosmart B110a - poor print quality

  Hello

  I have a HP Photosmart B110a CN245B and I use Mac OS X Lion version 10.7.2.

  I bought this HP Photosmart camera in the month of August, I changed the black cartridge once and it worked well. But now, replacing the black cartridge for the second time, I had a few problems. Printing is faded, I can barely read what is written on the page, even if I chose 'Grayscale - black print cartridge only' and 'Best quality'... the print quality is very bad. What can I do?

  Thank you very much!

  I think that the printhead has failed.  It should be under warranty.  Here's how to contact HP technical support: www.hp.com/go/totalcare

• HP PhotoSmart b110a stops at halfway printing

  When printing from Windows 7 for HP Photosmart b110a cable, the printer starts normally but pauzes at halfway. Nothing happens for minutes, and then he throws the paper and gets a new. Then again, but stops at halfway. Same thing.

  When printing wireless smartphone Android or Ipad I have no problem at all, so the problem is not in the printer I think.
  I already reinstalled complete driver. And the critical update installed on HP site...
  Please help, thx for the Netherlands,
  Steven

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP - Photosmart Wireless e-All-in-One Printer B110a - Software & Driver Downloads
  <- set="" to="" your="" vesion="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4022343&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Photosmart Wireless e-All-in-One Printer B110a - Support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=4022343&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably still the drivers but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Photosmart B110a: eprint problems after Windows upgrade 10

  The printer lives in my office, plugged into a Mac.  My laptop connects wireless to it.  You use Windows 7, the laptop could connect to it as a network printer via the Mac, which required that the Mac be turned on, or directly using eprint, requiring only the printer.  After upgrading to Windows 10 I re-installed the printer as a network printer and everything's fine but eprint does not at all.  I downloaded the latest version and I get a 'eprint + Jetadvantage' device in my list of installed printers, but if I select to print anything it either nothing happens.  The call to the top properties of the printer shows an error message saying "eprint driver is not installed on this computer.  You want to install it now? ».  This leads to a "pilot Add Printer Wizard" which lists a driver of HP eprint.  Try to install this product a message that I am about to add the following driver "HP ePrint, x 86, Type 3 - User Mode" but nothing seems to happen and I still get the missing pilot error.  I uninstalled and reinstalled several times without success.  I ran the HP Scan doctor and print, but it can't even connect to the eprint printer.

  Any notice received with gratitude.

  Hello @Ticfan,

  Welcome to the HP support forums.

  I understand that after upgrading to Windows 10 that you can no longer use the driver ePrint.

  The first thing I want to address is the "ePrint + Jetadvantage".

  It is not the driver ePrint have you need or want. I will not go into too many details about it, but it's a commercial product and the Photosmart B110a is not supported. It would be best to uninstall this piece of software.

  The following link will take you to the correct driver.

  You can select 64 or 32 bits depending on your operating system.

  HP ePrint Software

  I'm curious about something. How is the printer is not on a local network with other devices? How is it, you chose to go through the Mac? Why not have the printer on Wifi and having the laptop connect without having to go through the Mac? Maybe I'm missing a part of the installation, but this seems more complicated then it must be.

• Re-setup of printer after new installed wireless router.

  Having recently installed a new wireless router, that I had to reinstall my Photosmart B110a as I did not see the printer on Apple devices using the router.

  There are 2 Intel MacBooks, 1 iBook G4 and a PowerBook G4 all work OSX 10.5.8 plus an office of G5 running 10.4.11 on this router.

  I installed the driver but when I try to add the printer I get a dialog box requesting the "Ipadmin" username and password.

  I don't, as I remember, put in place a group skinning Ipadmin and I was wondering if anyone else had come acrosds such a request?

  Is this useful? : http://support.apple.com/kb/TS2754?viewlocale=en_US&locale=en_US

• Photosmart B110a Wifi Macbook Pro Scan fails after the most recent firmware update: CHL1FN1146AR

  Hi all

  I currently have a problem when scanning on wifi using a Macbook pro (Mac OS X 10.7.3).)

  Printer/scanner/copier is a: HP Photosmart B110a model: CN245B

  Service ID is: 20348

  The driver version is: HP ink Jet 8 pilot 3.5.2

  I used to scan directly into Evernote after completing the following steps:

  System Preferences - print & Scan - Scan - Scanner-open

  At this point the printer stops responding (just the apple turning and turning circle)

  The utility shows HP status: 'Idle '. The serialnumber Sevice ID and model are shown as well.

  Reset the system of printing and reinstalling the driver unfortunately did not solve the problem.

  Even the HP utility informs me that "an error has occurred."

  I tried to press the button 'wifi' on the printer for several seconds to make my router was able to connect to the printer.

  It seemed to work. I can print to the printer, once... grmmph... After successful printing I launched a scan...

  Too bad...

  The message:

  "The scanner reported an error.

  The scan did not complete because the operation was canceled while the analysis was underway. »

  pop up.

  Power - off at least 60 seconds does not resolve the issue.

  This behavior has started to happen right around the time that I installed an update of the firmware on the device.

  The current Firmware version is: CHL1FN1146AR

  I can reach the printer using a Web browser, the printer is showing the status of 'connection '.

  The webscan works like a charm and the self test page print works as well.

  If the printer is in my humble OPINION.

  Please let me know if this sounds familiar to anyone. Maybe a restore to the previous firmware could solve my problem?

  Best regards

  Martijn Krop.

  PS: My router is a

  TP-Link WR1043ND Original newest Firmware. The protocol used is WPA - PSK (automatic encryption)

  Hi Martin,

  First of all, try to reboot the router?

  I always suspect the router.

  Even further because it seems not to support Hello based on the above document, the manual of the router and the router configuration that I went through with no opportunity to locate any indication for its support.

  Please try temporary without going through the router and check the differences:

  1. On the product control panel, tap the Setup icon ( ).

• OfficeJet 5745: Cannot print after update of Windows 10

  I've updated to Windows 10 and now have problems printing.  Help!  I've done all the troubleshooting, coil status stuff!  I'm used to be able to print from the internet, scanning to my computer or email and print wireless from my phone.  I now can not print anything!  I tried to install Windows updates.  Should what printer I configure default network or regular?  Use the printer pdf microsoft thing?  I am desperate... saved my bank statement online (pdf) to my documents and it would not print the Bank or my documents!  Before this I had problems after that my hard drive crashed and I got a new hard drive.   When my hard drive crashed I was using WINDOWS 10 and everything on the big printer worked; they sent back with new hard drive on windows 8.1 and I had I thought that the upgradew would solve the questions.   I could print and scan but no wireless for my phone on the new HDD in windows 8.1 and upgrade to 10 thought would solve my problems, but now it's worse... Help!

  Hi @savra,

  If your computer is connected to the printer on a wireless network, you do not want to send print jobs to the network printer.

  Here is a support document to help with printer after Windows 10 upgrade problems - after Windows 10 Upgrade, printer problems occur.

  Aside to make sure Windows updates are up to date, there are a few other updates that can help with printing.

  Microsoft has released an update that is supposed to help with wireless printing - Cumulative Update for Windows 10.

  There was also an update for Adobe Flash Player in Internet Explorer and Microsoft Edge who can help get this impression of your bank's site - Update for Adobe Flash Player.

  Please let me know how it goes.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Spoolsv.exe has 99% of the cpu when I turned off the printer after printing.

  Original title: spoolsv.

  I recently installed a new printer Lexmark Pro715.  Everything works fine, no problems with printing, but as soon as I put off the printer after printing, spoolsv.exe takes 99% CPU.  If I leave the printer in mode 'sleep', the problem is, but I do not often print, I prefer to turn off completely.  There is nothing in the print queue, everything else seems normal.  I can use the Task Manager to stop it, but this isn't a good solution in the long term.  I run MS Update and uninstalled and reinstalled the printer, with no effect.  It's driving me crazy.  I have Windows XP Home Edition SP3.

  From what I've read on the Internet about the print spooler using 99 to 100%, Norton is also sometimes involved as a contributing factor to a runaway print spooler for some people (where my request).

  IIRC, people would set their Norton to start a scan and when it was made, the print spooler has run amok at 100%:

  "Because I have Norton Antivirus, do a system scan every Friday night that I happened to see that the value SPOOLSV. EXE is using almost 100% of the CPU of the morning Saturday. It's the only time that it happens, so I simply stop the process in the SERVICES window, and life is good. I don't know why Norton Antivirus it triggers during the scanning process that I couldn't find anything on the Symantec relating to this site. »

  If the problem resurfaces surface, using abduction special tools on their website, you can uninstall your Norton and view the appearance of things without him - you can always reinstall again once, right?

  I disagree with Norton in general for its CPU and memory hogging and known interference with other XP processes (such as the restoration of the system), so I'd keep which in mind if the problem returns.

  A few years ago, I used to like Norton correct, but will never go back or recommend it.  Microsoft Security Essentials with it's lower overhead and footprint and some regular on the analyses at the request of the MBAM and SAS should hold your own system based on your surfing habits.  Your system will reward you with an improvement in the overall performance of the system as well.

  I can tell you that no single AV tool seems to know everyting so it is safe to use several respectable scanning tools.  Norton certainly doesn't know everything.