Printer in Windows 7 software

Similar Questions

• 4502 HP printer: printing HP 4502 for windows 10 software

  Just 4502 HP printer but can't find the software for windows 10.  Can't someone please this me in the right direction.

  Hi @sylvialomax,

  Welcome to the Forums of HP Support! I see you want the software and drivers for your HP Envy 4502 and the computer running the operating system Windows 10.

  You can use the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and Windows 10 users download and install the most recent and most appropriate HP software solution for their HP printer.

  OR

  Here is the link:

  HP ENVY 4500 e-all-in-One Printer series full feature software and drivers

  I hope this helps!

  Thank you

• HP Photosmart Plus B209a-m software printing for Windows 8.1

  I recently bought a HP desktop computer preloaded with Windows 8.1.  My printer is a HP B209a-m, but the installation disk will not install on Windows 8.1.  Is there anyway that I can get an installation disc for my HP printer, which apparently only works with Windows 7 and lower?

  spo_1948,

  Click on the below link which will take you your software products download page then you can select your operating system, this printer support WIndows 8.1 and download and install the software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0003&LC=en&product=3777182&

• Photosmart 6515: Printer will print 10 Windows with HP full software

  Printer does not print with full features software, as soon as I remove the software, it works but with the software, the system indicates it is printing and the document in the queue disappears, but do not print. I have connected via USB cam no Wifi.

  Print and scan doctor goes in the cycle without end of reset download software then after restarting the same again wether I continue or start over.

  If I uninstall all HP software I can print but not scan even when starting from the analysis of the printer itself. The printer indicates that it cannot connect with the computer. Changed cable and tried multiple USB 2.0 ports

  I am ready to throw this thing in the trash and never buy another product from HP with the terrible support received, dead links, and irrelevant advice.

  OK I thought about it. Maybe a good idea for a team practice is to ask how I downloaded the software for this device. Given that Windows applications now minimum 10 different uses of the Microsoft application store maybe that should have been your first question instead of sending me the * beep * boilerpate email.

  Support of incompetents, I had heard that HP has become, now, I think it is. It is the last HP product I will ever buy.

• Printer problems due to software on my windows vista desktop problems

  They told me that I have a software problem on my windows vista desktop, because - my printer print test page, but seems to have a communication problem with some of the jobs I want to print. I can't right click and print. Someone at - he heard of this problem and might be able to give me some advice?

  Hello

  1. What is the exact error message?

  2. What is the brand and model of the printer?

  3 have there been recent changes made on the computer before the show?

  Please follow the steps below and get back to us with the results.

  Method 1: Run the Microsoft fixit and check if it helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2: R the print service spooler and verify.

  You must be logged on as administrator to perform these steps.

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Update the printer drivers and check.

  Find and install printer drivers in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  For more information, see the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• How to install the new Windows 7 software for my printer?

  You can have a printer and want to install it on a Windows 7 system, but the CD does not work.

  HP Windows 7 installation wizard may be able to help.  It detects the printer and help to download the latest drivers and software for your printer and Windows 7, as long as it is taken in charge for Windows 7.

  Click on the link above for more information about the utility.

  I hope this information is useful.

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I was wondering if I'm looking for something which exists not-firefox can automatically close the "Print preview" window after printing?

  I use the addon in my firefox toolbar to print an excerpt from the data of the Web site and then add it to a pdf file. Sometimes I'm distracted, then do not remember if I went through the process and print/added the page in the file. It would be useful if there was a way that the print preview window closes after printing which confirms that the process is complete. Thanks in advance.

  You're right: print preview remains open until the licensee. As a person who is regularly using the ESC key to dismiss dialog boxes, I had not really noticed an extra step.

  After a little research, it triggered a few times over the years (at least 2 identified bugs) but one was rejected immediately and the other has not attracted a serious debate since it was filed in 2006. I think that there are no secret switch in the software to do this.

• HP OfficeJet 4652: Hp OfficeJet 4652 do not print in Windows 10

  HP OfficeJet 4652 do not print in Windows 10, made an update of the firmware, it says successful but no printing after having installed the software.
  Tried different drivers even installed on another computer same thing.

  I can print a report.

  But no testpage print (failure).

  I went back this printer and bought another a HP OfficeJet Pro 8715 now to make things clear, this printer is connected by USB and not wireless, it also would not print same symptoms, it's two thing might software takes another printer HP OfficeJet Pro X576dw which is operated wireless then I unplugged the printer and started on after reinstalling , I realized they were three updates from HP now everthing works fine Yes.

  I don't know if it was unplug the other printer or updates that work.

  All is well now.

  Thanks for your help and your quick response.

  Edward

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• HP OfficeJet 6500 E709n: Strange characters in the printer on Windows 8.1 preferences page

  When I use the printer from native Windows applications such as Notepad, Paint, and Wordpad etc., strange Chinese characters appear in the printer preferences window and no option selection is visible or available.   -No error message.   -J' I disable the device and re-installed the latest HP driver software.   -L' unit operate normally, except for the problem of page preferably.

  Hi @JSvWyk,

  Am I assume it looks something like this?

  

  You may need to change the language of your operating system. Research I've done, it seems that some languages, such as English (United Kingdom), cause this hiccup. Please check or change your language to English ( States- United).

  To check or change your current settings, go to control panel and select clock, language and region, and then select change regions. On the Format tab, select English (United States). On the location tab you have the United States in the current location of falling down and then select apply.

  Please let me know if I indeed understood the question correctly, and if the problem is now resolved. Thank you.

• Designjet 130: Two printers Designjet 130 do not print with Windows 10

  I have two printers Designjet 130. Both work fine with XP/Vista/Windows 7. They do not work with 10.

  I spent 20 hours trying to get these things to work with no luck. I tried TWO different machines running windows 10 does not. These printers are running via a USB connection.

  I can install, make the printer by default and PRINT TEST page! I can also print from the HP Scan DR who assures me that all is well. However, when I go to a program such as Notepad, they will not print. Notepad returns an error "The deal invalid. I tried researching this message, but it leads to good spirits more that I can understand.

  My machine is a processor Intel X 5960, 32 GB of memory and a motherboard Asus x 99 Deluxe.

  I tried to launch the installation of the HP software in a variety of modes compatible with no luck.

  I'm out of ideas other than to roll back my 7 software, which I really don't want to do.

  Thanks in advance.

  Ok. I finally solved this problem. I went to the HP site and even ONCE downloaded the driver Designjet 130.

  Download driver on Dec30, 13:34 had a 2 652 k file size

  Today at 11:53 driver has a file size of 3099 KB.

  Maybe they (HP) fixed.

  Maybe my original upload has been altered.

  Very simply:

  Connect your printer. Windows will find and automatically install the USB printing as well as a device driver option. This driver won't work, however, you end up being able to print a test page. This ultimately will always be a false confirmation. The driver version 7.00 is for Vista, Windows 7 and 8. It doesn't work in either compatibility mode.

  Go ahead:

  Go to devices and printers.

  A series of beautiful graphic icons opens.

  Double-click your printer.

  Double click on "customize your printer.

  Go to the about tab.

  Check your installed printer driver version

  10 Windows will install default v7.00 and will keep you in saying he has the best version

  available. Don't believe that.

  The Hewlett Packard scanner DR software will tell you the same thing.

  Do not think that either.

  You want to version 8.10. It is available on the site of HP in 32-bit and 64-bit versions. Download it. I unzipped in a folder on my desktop.

  Now, go to the Device Manager.

  Scroll down to "printers". Click on.

  Right click on your printer.

  Click on "Update driver software"

  Do not click on the first option by default.

  Do not click on "Browse my computer for driver software".

  Click on "Search for driver at this location software '-specify the folder on your desktop and select"include subfolders. "

  Click Browse. The software will make a satisfying update.

  Return to the file "Devices and printers" and the option "customize your printer.

  Double-click. Return to the 'About' tab and confirm that driver version 8.10 is installed.

  Close to everything and to print something.

  Just to check myself, I printed my second document to confirm a nagging doubt.

  The impression is confirmed. Good year for me and anyone else reading this.

• Drivers for HP P1005 printer laser window 8 64-bit

  The pilots were suppose to be at the end of 2012. Help, please. HP P1005 printer laser window 8 64-bit.

  Hello

  Have you tried to use the 64 bit Windows 7 software?  This should work for your printer under 64-bit Windows 8.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 3435676

  I am an employee of HP.

• PSC2175: PSC 2175 does not print on Windows 8.1

  PSC 2175 prints on Windows 8.1. Although it scanner and Windows recognizes that the printer is connected is not in Applications like Internet Explorer and Microsoft Office as an available printer even though it is listed in the hardware and printers. HP Print and Scan doctor says that the software is installed, however if you select "fix print" and says that the complete software solution is not installed. If you select "Make install", it says "Page not found". If you select "Drivers and software" and follow the instructions the software only lists is utility of Diagnostic Tools that expands to be install printer HP for Windows. When it works, it says that the printer drivers may not be loaded correctly. By following the instructions to fix the problem, it of just in a loop back to the original Panel, saying that the drivers do not seem to install correctly and try reinstalling the downlaod and install the wizard.

  Hi @manzagol

  It seems that diagnostic tools take you in circles. I'd be happy to help you, but I'm afraid that there is no feature complete and the software for the PSC 2175 for Windows 8 or 8.1.  Instead, you use a driver in OS. A printer driver is software that lets the computer run the printer.

  I wonder if you can uninstall the driver in the OS and reinstall it again. I wonder if the instructions given in the following link may help you with this; Uninstall, disable, restore and update device drivers in Windows 8 / 7

  I hope this helps.

• How to: scan with the HP Windows 8 software

  Learn how to analyze with your HP printer in Windows 8 by using the software provided with your printer.

  I hope that this video is informative and useful in your scanning process.