HP Photosmart Plus B209a-m software printing for Windows 8.1

Similar Questions

• HP Photosmart Plus B209A does not print black ink despite trying two separate NEW ink cartridges black

  HP Photosmart B209A more

  MAC

  No error messages but trying to align or check colors - black doesn't print at all

  No change - knew ink was low so I tried to install a new black ink cartridge - then one day later tried an another new black ink cartridge

  I tried all the techniques of "Troubleshooting" listed on the page Web - align, clean the print heads, install the new cartridges, looking for trouble with the vents, etc.  I have only used HP ink cartridges.

  Hi abruce,.

  Usually, it is a result of dried/clogged ink nozzles in the printer or the print head.

  According to some other users on the forums, you can remove the print head (use this guide if you are unsure how: http://support.hp.com/us-en/document/c01944580)

  Make sure the cartridges are removed from the print head

  Dive head in hot water, nozzles downwards. (about 1 in. of water) and leave any residue of ink to flow. This process should take about 15 minutes. Ensure that the print head is completely dried out and there is no moisture in the electrical contacts or the rest of the part.

  I hope this helps!

• PhotoSmart Plus B209a won't print black notebook

  Printer does not print dark from NotePad or WordPad.  Will be print color of NotePad or WordPad (even when only one of the text) and will be black print of Irfanview, Web sites, etc.  Black print cartridge replaced new cartridge HP.  Printhead cleaning manually.  Clean by using the Toolbox.  HP ran troubleshooting.  Print uninstalled and reinstalled the software.

  Problem seems with black of NotePad and WordPad print only.

  Never mind - I think the section of for the black cartridge print head went south.  Replaced the B209a with the new printer.

  Thank you.

• Why did TMP_00 attached to my name of the printer, Photosmart Plus B209a-m

  I had to reinstall my network from my HP Pavilion DV6 laptop, an HP Photosmart Plus B209a-m and a router D-links.

  Since I did it, the laptop is fine, but I was unable to get the printer works wirelessly.  I spent hours chatting with HP printer location, but they have not yet set.  I was told that I had to uninstall my USB and let him resettle.  I saw on an attempt there is a shift of the IP address to reinstall.

  It seems to me that either uninstall and install does not completely remove/replace all necessary files because I saw things like TMP_00 and Copy_1 attached to the end of my name of the printer also, when I looked "Protected from the network connections for the domain profile", he mentions 3 connections.

  Wireless Connection2

  Wireless network connection

  Connection to the local network

  I need to delete all files after uninstall, so that my printer name is not a TMP_00 or copy2 attached to it when I reinstall?  Is it important that the names are extended or if multipul connections listed there?

  Thank you for your response.  It seems the best answer I got, here or through conversations, HP Solution Center, original install disc, etc.  I saved it in case I have problems in the future.

  My printer seems to work fine now, even wireless scan.  I looked in the start menu and click the HP folder, inside was my printer.  I clicked on that and chose the option to change to wireless USB.  I went into the menu and in the end I pulled out the USB cable and everything seemed to work.  The screens were all as the orig. install screens and he acted as if it was a new printer with options to save my new product HP and the HP etc shop offers.

  After hours I spent on it, the solution was still within my reach.  Not sure I should give congratulations, because I'm not going to try your solution.

  Thanks anyway.  Mark Brorson

• HP Photosmart Plus all-in-One Printer series - B209a

  Hello

  I have a problem with my HP Photosmart Plus all-in-One Printer series - B209a printer.

  It prints a picture by using too much magenta.

  When starting the printer, I got a message saying that I had to replace the magenta toner with a new one. I did as instructed. I printed a new document, but it came out in magenta.

  Even if the other cartridges were not empty and yet I replaced with new ones, thinking that maybe the ink dries up because I have not used the printer for a few months now. I used all original HP XL cartridges.  Subsequently, I printed testpages 5 before you print my picture.

  The printer uses all colors now, but it uses too much magenta to print my photo.

  I used the printer for several years now and never had this problem before.

  Is this a problem that can be solved?

  Troubleshooting steps described in this document can help solve the problem.  Be sure to check the vents to make sure that they are not plugged.

• I have a HP Photosmart Plus B209a-m which do not print...

  I have a printer HP PHotosmart Plus B209a-m who do not print... He goes through the motions and makes all the right sounds and then when the book comes out it is empty... It also not directly print from the PC no longer... say a bank starment just for an example... it gives me an erroe message or anything... I checked the acrtridges of ink and even replaced all and always note... someone can help me please... it's printing and passes through requests for printing including all sounds good and I'm not receive error messages and yes I checked the cartridgies of ink and even replaced all the and still not feel like someone could help me please... I unplugged and turned him away and still not printing...

  I'm sorry that you are having problems with the printing of blank pages. It may be a problem with the print head. It needs to be cleaned or goes wrong.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c01892627

  Let me know if it helps.

• HP Photosmart Plus b209a-m: prevent the attempt to auto-install on reboot

  Whenever I start my Lenovo Win7 PC, the HP Photosmart Plus b209a-m trying to install automatically (even if not connected by USB on my computer).

  This unwanted installation works ever ("fatal error during installation") with the message "-error" "wStub" "66814.

  When I click 'OK', hold the popup "remove software" then 'analysis of installation error logs' begins and clicking on 'Cancel' doesn't help not (results in 'continue' or 'Retry').

  I don't want to use HP Photosmart Plus b209a-m, so how can I prevent automatic installation does not happen?

  Thank you.

  Hey there @LB84105

  Thanks for posting on the HP Forums.

  I want to help! I see that your computer keeps trying to install the printer software.  I recommend you to go to "Add or remove programs" and making sure that all the printer software are uninstalled. When it is finished, run the "Disk Cleanup" and mark all the boxes to remove the folder temp and other junk. Restart the computer and let me know if the message stops.

  Thank you!

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.
  Have a nice day

• HP Photosmart Plus B209a-m stopped working with a Macbook, still works with others

  We had this printer wireless printing of 2 Macbooks a running OS X 10.8.2 and another OS x 10.6.8 without any problem for some time when it suddenly stopped working with the old Macbook running 10.6.8.

  When we tried to print anything in that nothing happened, when we open the print queue, there's an exclamation point to the left of the print job and to say an error message something about the levels ink (ink levels were very well as it print to the other Macbook without problem).  We tried the buttons pausing and resuming.  I can't provide exact errors that we had because now that we have tried to reinstall the drivers we get a new series of errors.

  We redownloaded the drivers for OS X 10.6 on HP website and tried to go through the HP setup assistant.  When we arrive at step 'Select printer' and he takes us into the preferences system to add a printer - our printer shows up, but when selected, we get the following error message: some of the software of the printer is missing.  You may not be able to print to "HP Photosmart Plus B209a-m" Please reinstall the printer. software - and of course, we are not able to print.

  We uninstalled and reinstalled the drivers several times without any effect.  The only way that we were able to print off the computer is if printer sharing is enabled on the other Macbook (with OS X 10.8.2).)  Then, it presents itself as a separate printer and can be used by the old Macbook only if the other is on.  This isn't how it was put in place when we had the two work before.

  Any advice would be appreciated.

  Margorie

  What router are you using?  I guess that the 10.8 machine can print correctly?

  Let's start with that on the 10.6 machine: download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Unable to uninstall HP Photosmart Plus B209a-m.

  I can't uninstall my printers software. I double click on the software of printer dirver. Then, I select "uninstall." Then, I select "uninstall all HP products associated with this device. The software then comes back and tells me that "what will be removed" HP Photosmart Plus B209a-m ". I then "select continue ' and he comes back and tells me that"you must restart your computer to complete the uninstall,

  "Please save all your work and then click on finish, uninstall will end after restarting your computer.

  I then click on 'next' and it restarts my laptop BUT after restarting, nothing happens. If I go through the process again the same thing happens. According to me, there is a file or which prevents the process happening. Any help would be great.

  My laptop is a laptop CTO Pavilion dv7t-7000.  And of course the printe is a HP - Photosmart B209a more

  Hello @Harlydude , welcome to the forums

  I read your post about the problems you are having with your Photosmart Plus B209a uninstalling model. May deepest uninstall, try the following steps.

  1. Click Start, type %temp% , enforcement, and click OK.
  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one 7z folder, try the newest one).
  3. open the util folder.
  4 open the CCC folder.
  5. run the Uninstall_L3.bat for a HP PC.
  6. once the uninstall is complete, restart the computer.

  The software should be removed now.

  Let me know how it goes for you!

• Our HP Photosmart Plus b209a-m this that it is not connected after a change of modem.

  Lightning struck the power line outside our House. We had to replace the modem. Now our HP Photosmart Plus b209a-m shows that it is not connected. Connect us wirelessly. What should I do to get this operational return.

  Go to Applications > Hewlett-Packard > [your printer model] > setting up the printer and software.  Run it to re - connect your printer to your wireless network.  Need you a USB cable temporarily.  Connect it only when the software asks you.

• HP Photosmart Plus B209a-m wireless disconnects once the system is shut down

  I use the HP Photosmart Plus B209a-m on a Dell XPS 16 with Windows 7 64 bit. I have set the printer to connect to the wireless router Belkin isn't on the network. I have setup the printer several times and had it work wireless several times. Once the PC is shut down, the printer goes offline. I have to restart the installation time and time again to bring wireless online. I added the MAC address of the Belkin router and I have the camera had confidence in my Norton Firewall. I keep seeing "HP Network Support Automatic (delayed start)" in services, but by changing it seems to make a difference, I still need to run the installation once after the system is shut down. I see also two printer icons in devices and printers. We're just the Photosmart printer with a generic printer icon; and the second is Photosmart printer, Scanner, copier with a picture of the Photosmart which I believe it should be. I ran the installation at least 10 times and I get a good wireless system work then after that the machine is stopped for the day the printer is offline and do not print. How can I stop the printer goes offline in wireless mode?

  I solved the problem.

  I put the IP address to the MAC address of printers in the router.

  I put the printer to TRUST in the network settings on Norton Security Suite.

  The printer works wirelessly all the time now.

• HP photosmart plus b209a-metres driver install fails

  Hello

  I can't install a driver of hp photosmart plus b209a-metres. The cd and the downloaded version does not reach

  in the middle of the installation in the "application of updates. No error message it simply disappears.

  Stop anti viruses, nothing helps.

  Tried on a 2150us Pavilion dv6 and dv7 1260us windows 7 64 with the same results.

  He settled in "windows 7" (?) compatibility mode, but only a wired connection can be established.

  Installed on a new Mac, no wireless connection either.

  The printer seems to recognize networks wireless in the neighbourhood according to its printed diagnostic network

  but not through the dialog box to install.

  It is an older model (sitting in its box until the death of our other printers), the driver is old, but still 2 years ago

  could have been a good home network printer

  Any advice would be greatly appreciated

  Thank you

  Hi MDG21,

  Follow the steps described in the document on the link below to connect the printer to your network and follow the remaining to uninstall and reinstall the printer. Let me know what you find?

  Installation of the software of the printer on a wireless network

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-71739-3&cc=US&DLC=en&LC=en&os=4063&Product=3777182&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Photosmart Plus B209a-m installation CD is not compatible with Windows 8.1?

  For the ninth time now, after that some updates from HP that I'm no longer able to use the scan function on the HP Photosmart Plus B209a-m all-in-One printer I've owned for more than two years now.  I tried all the things suggested the HP Support Assistant, including the feature troubleshooting and restarting.  So I took the next step in uninstalling the printer and put it back, eventually.  Or try to reinstall, it is.

  I had a Windows 7 HP laptop when I bought the printer, but now I have a newer HP laptop who initially missed out on Windows 8, but has recently been upgraded (?) to 8.1 Windows.  I was able to install the printer, after that I'm the new laptop under Windows 8.  But when I put the CD is no longer allows me now to proceed with the installation.  Of initial pop-up box tells me to click on 'Install', but the only available choice is "quit".  In addition, it has a red square with a white 'X' in the upper right corner of the popup box.  I have never seen that in any of the previous eight times I had to re - install the printer.

  So now what should I do?

  Terry Sullivan

  The original CD was manufactured before Windows 8 or 8.1 have been released, I would suggest downloading the recommended full 8.1 HP here windows driver.

• Cannot install HP Photosmart Plus B209 full feature drivers on Windows 8

  Help, please. I'm stuck in a swirl of installation nightmares HP and there seems to be no leaks.

  I have a new laptop to Windows 8. The short story is that whenever I have try and install drivers for my HP Photosmart Plus B209a all-in-one comprehensive features, nothing happens. Although printing function still works, neither Windows nor an app or program that recognizes the scanner, and therefore I can't scan. I tried following instructions for a clean uninstall of the old drivers and then reinstalling the most comprehensive features, but still no installation occurs.

  History a little longer: the entire system (including scan) worked fine on my old laptop to Windows 7. As explained above, printing works fine on the new laptop Windows 8 (Windows seemed to automatically install some drivers when he realized everything first the HP device has been connected to the network), but I can't scan for love nor money - Windows Fax and Scan or MS Paint never recognize that there is a connected scanner. I tried to install the latest drivers for full functionality and the center of solutions for the product (file name: PS_AIO_06_B209a - m_140_408.exe [1/1, 228.58 M] from: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109701-1&cc=us&dlc=en&lc=en...) but each time, after downloading and extracting, nothing happens - no setup or welcome screen just nothing. Files extracted up to 100%, a CD cymbol appears briefly, then nothing. Bizzarely once, did it come with the screen of welcome Setup with the options 'Install' or 'Out', but after clicking in 'Install', nothing happened. Since then, I can't seem to go beyond the stage of extraction

  So I have followed the steps proposed elsewhere to do a clean removal of the old drivers and reinstall - notably by ensuring that all relevant programs are uninstalled, the temporary files are erased, the device is removed in Device Manager, restart the computer, etc., but nothing works. Whenever I have download the new driver, it will not be passed the phase of extraction.

  All advice on this, or there at - it another way to get the work of service scan? Please put me out of my misery...

  Thank you, Jack

  At this point, I'd run the option Windows 8 r .

  This Microsoft link explains this option.

  Read the note & WARNING messages.

  Make sure you have a backup of all your b4 of personal files running the Update.

• Full software functionality for Windows 7 missing functions HP2610

  MFP HP2610, Windows 7

  Installed last full feature printer software from HP website.

  Problems:

  1. I wanted to send a fax from the computer but couldn't find controls cover page to put a message on the cover page.

  2. There is no Preview Fax button.

  3 quality fax options are low, medium and high, but not the quality picture, even if assistance says there should be a Photo quality option.

  4. how to import addresses? Aid is said to use the address book in Internet Explorer, but IE is not an address book.

  It tells me that the Windows 7 driver for this printer is very disabled compared to XP driver that has these features. HP Director software which is running XP is also unavailable, is there a download for HP Director?

  Hello

  Some of the features HP full feature has changed:

  Regarding your 1st question, the page function Fax coverage provided is no longer, since version 7 of the HP Solution Center software.

  Overview of Fax option is no longer available for newer models with the center of Solutio HP as well.

  So, by testing the newer models, the highest quality of Fax listed as high.

  As for question 4, the address book relies on Windows Contact:

  1. Click the Start button
  2. Type of Contacts in the search bar, you will find the Contacts application
  3. Follow these steps to import contacts:
     http://Windows.Microsoft.com/en-us/Windows-Vista/import-export-or-change-the-format-for-contacts

  HP Director is not compatible with Windows7, the HP Solution Center is the only version available for your printer for Windows 7.

  Kind regards

  Shlomi