Printer is not showing - simultaneous Requst

Similar Questions

• printer is not showing is not newly installed; color cartridges It prints well but not scan or copy

  I installed new color cartridges, but they do not appear as such in the display panel printer, which continue to save empty color cartridges.

  The printer test page was perfect.  However, the printer is neither scanner nor fax, nor can I access the installation options.

  Sorry you have a problem with scanning and copying after putting the new cartridge in the printer.

  What kind of printer you have?

  You can try to perform a hard reset on the printer. Unplug the power cord at the back of the printer. Leave for 30 seconds and plug it back.

  You can also clean the print head because it can read the contacts on the new cartridge wrong.

• Adding printer series HP PSC2100 via the IP Port, type of printer does not show on the list of devices even when you are using the factory supplied driver disk.

  Installation D-Link DP-301U network home of three computers. I am able to access the printers using its IP address, Setup has worked with Vista Ultimate system but two systems of Windows XP Pro (SP3) does not Printer series HP PSC2100 list when you use the 'Disk' during installation radio button. Is there a work around or Microsoft drivers to resolve this error?

  Hello William51,

  Thank you for your message.  Try the following steps to add your printer.
  Click "Start" > select "printers and faxes".
  Click on 'Add printer' > click 'Next' > select ' local printer, and then make sure that detect automatically is disabled
  Select "Create a new Port" and the arrow down to "Standard TCP/IP Port" > click "next".
  Click "next".
  Type the IP address and click on 'Next' > 'Finish '.
  You must then install the driver/software for your device.  You can use "Have Disk", download from website, or find your model.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Why my printer does not show the same type of size I used when you type a letter on the Microsoft Word processor

  I used Times New Roman 10, when you type a letter on Microsoft Wiord processor and when 1 print the letter la

  He came out of the printer with a much smaller type face. (Dell Windows Vista and Dell AIO Printer 926).

  Hello

  http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

  Download and read the manual above for her

  and try to dell support

  http://support.Dell.com/support/index.aspx?c=us&l=en&s=Gen& ~ CK = mn

  and dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• Photosmart premium all-in-one: printer does not print.

  I printed a photo of the night before and the next day it wouldn't print.  I put in a new black cartridge HP first, and when it does not work I put in a new photo cartridge.  All my cartridges show as complete on the computer report but the report to the printer does not show anything in the settings of the picture. I downloaded a driver updated, still no luck.  Very frustrating!  What can I do?

  Help please...

  Yay Jabzi!  I am so excited!  It actually worked!  I am 72 and a little hesitant to pull things out of machines so am very happy and grateful for your help.  Thank you!!!

  Marg

• printer upgrade system but cleint server group policy printer displays not not in the devices and printers

  updated to the cleint system but printer server group policy printer does not show same printer displayed in the list in the devices and printers, but while printing the document, what is the problem of how solve the problem.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• in my printer, I fill ink but when check here see the ink did not show anything

  so last week my printer working correctly and there see the ink low level. so, I refill the ink. so, when I saw the ink level, it did not show anything. the ink was no more.

  Hi Raghini,

  What is the brand and model of the printer?

  If you facing problems with the ink level, you could get in touch with the manufacturer of the printer to get the replaced cartridge or for further assistance on this issue.

  For more information, see the article:

  Check on a printer ink levels

• Office Jet 6500 Wireless: print works do not showed "filter has failed."

  My Officejet 6500 wireless works very well on the scan, but will not be printed. It showed "Filter has failed" and paued on wirelss or plugged USB cable?

  Hi there @Hsiu

  Welcome to the forums

  I understand that you see a message "Filter failed" when you try to print from your Mac, with the Mavericks. I have a few steps that I would say that you follow below that should help you.

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Follow this guide: install a printer Mac driver by using Apple Software Update
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers

  Good luck, I hope it works!

• I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

  I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

  Hello notnewbee,

  Thanks for posting on the Microsoft answers Forum.

  You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
  you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

  If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
  The information below will show you how you can make older programs run on Windows 7 here.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Devices and printers" do not show the printer on LPT1

  I recently added a printer on parallel port LPT1: on my PC running Windows 7 Home Premium 64 - bit edition.  The installation was successful.  I can print a test page and you can use the printer from applications, including Notepad, Microsoft Word 2010, and command prompt.  I find it puzzling, however, that the printer does not appear in the list of printers in the "Devices and printers" Control Panel applet  Is this a bug in Windows?  Microsoft has a fix available?

  Hello Tony,.

  Thank you for your reply and sorry for the late reply.

  Sometimes, this problem appears when printers or other devices using the same driver and port on Windows. When you view the printers installed in "Devices and printers", you may notice that some of the printers or other devices are grouped and are associated with the same printer icon. Scenarios like two or more printers are installed using the same printer and installed driver with the same printer port (i.e. LPT1) shows this kind of behavior.

  I suggest you follow the steps described in the article below to get this matter resolved.

  Printers using the same driver and port on Windows are grouped as a reporting in devices and printers.

  http://support.Microsoft.com/kb/2015694/en-us

  Registry warning : To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/en-us

  I hope this helps. Please let us know the State. Feel free to write us again for any further assistance.

• Windows 7 - Photo Viewer does not show my printer

  WIn 7

  Using the Windows Photo Viewer and it does not show my HP 2600n printer.  All other programs (word, paint, ect) show the printer by default as well as the other selections (such as telefax).

  I like to use the Photo Viewer as you can print the correct size by selecting, but my Priner is not there.  It works fine on my other machine.  When I go to install a printer through the photo viewer, it feels but it reinstalls as (2) and it still not here has the time nect I open Photo Viewer.

  Help, please

  Hi Ptrapper65,

  Thank you for visiting the Windows Vista Forums.

  Run us SFC/scannow to replace all system files missing or corrupt.

  This command will launch immediately the System File Checker to scan all protected files and verify their integrity, replace all the files with which it detects a problem.

  1. click on start

  2. click on all programs

  3. click on accessories, then right-click on the command prompt.

  4. Select the Security tab and choose "Run as Administrator"

  5. click on command prompt

  Type SFC/scannow

  The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  http://support.Microsoft.com/kb/936212

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network printer installs and shows also ready to print but does not print.

  I tried these last days get my network printer after getting a new laptop from work. I have the printer connected to my desktop running vista 32 home, my laptop running windows 7 Home premium 64-bit. I can detect the printer when you add a network printer, very well, I installed without error, the printer indicates as being ready to print.

  When I try to print a test page, I get an error saying that the test page does not print, and returns me to the resolution of the problems... that found no problems. I'm able to share files between two thin computers and the printer works fine from the office and by other computers on the network.

  I tried to uninstall the printer and reinstalled, I've updated the drivers of HP, restart both computers. I have read other forums that suggest you add as a local printer, however, I put the name of exact port showed when detected as a network printer, and it does not find anything.

  I am really struggling to find a solution and I really need to be able to print from my laptop, so any help would be much appreciated.

  Thank you

  Fran x

  Hello

  As you say that you are not able to print the Test Page, it seems that the printer is not connecting to laptop with Windows 7. You may need to reinstall the printer and try to add ports manually during the installation.

  Also, follow the link given below to solve printer network problems.

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It is an article of Windows Vista, you can always try the suggested steps and check if that helps.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.

  If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.

• In XP, printer will not print web pages, it will only show ads on the page

  My printer does not print web pages, it will print the adds on the page but not the content like recipes etc.

  Thanks for the reply. Yes, it seemed to get worse and worse until I have seem not to be able to print anything, some sites I would like to print from them. The strange thing is on my preview before print, everything looks good, until I'm going to print, then nothing, example I tried printing on Artisan Bread today and the recipe appeared in the preview before printing with pictures of the recipe that everything looked ok, I'm going to print and all I get is photos of the recipe. I use Windows XP, is my printer Lexmark Z705 and I use Google.

  There are many places one can find artisan bread recipes.  What is the link to the site, you watched?

  Just click in the address bar of your browser until the address is set highlight, then click on > copy, click in your response here and right click > paste.

  Do you mean you use the Google Chrome browser or use Google to find your recipes?  At the top of your browser, click on help, then click on about.  What is the name and the version shown in the window that opens?

  Open your printer and take a look at cartridges.  Do you use cartridges of ink Lexmark brand to negotiate (or refills)?  What is the number of the cartridge on theright ?

  The following article does not directly address your issue, but it is suggestive.  Follow the suggestions and report the results. http://www.FixYa.com/support/t3070772-lexmark_z705_printing_blank_envelopes

• E-all-in-one HPOfficejet 8600Pro printer will not now speak to iMac since updates Driver & Maverick

  I just bought a new HP printer and set up on my iMac to print. After a LOT of messing around FINALLY got it works, BUT a day later upgrades arrived to update my iOS X 10.9.3 with a simultaneous upgrade of the software driver for the printer. I duly installed at once – but now, regardless of what I do the printer will not work. The computer can be seen as it is showing ink etc. levels and said he printed and I can print test pages, but it has not allowed me to print from Word, Excel, Web or PDF!  I tried to uninstall the printer drivers and reinstall those of the HP Web, which I suppose would be the 'old' - but still no luck. I need this job and am close to tears - any help would be appreciated. I also tried deleting and reinstalling Office for Mac... NB it prints beautifully and effortlessly to my husband's PC.

  Welcome to the LAG54 forums,

  I saw your post about not being able to use the printer completely after a few updates. I will do my best to help you with this!

  First, try the following steps:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your computer
  4. Add the printer: full function and driver-OS X 10.9 Mavericks software

  I hope that does the trick! Let me know the results!

  Have a great Tuesday