Printer laser jet HP 1109: all HP laser jet printers accept sticker paper?

Similar Questions

• Driver for Lenovo Printer Laser LJ2000 Windows 7, 64-bit

  I can't find the driver for Lenovo Printer Laser LJ2000 on Windows 7 64 bit OS

  Hi, AlbertChung

  I just looked around the Internet to find answers about this request, according to Lenovo China website said that there is no driver for Windows 7. I managed to find a driver on Lenovo China site, but it supports: Windows 2000, Windows 95, Windows 98 Second edition, Windows Me, Windows NT, Windows XP. This is why I can not guarantee that the driver works with Windows 7.

  The driver that I found: http://support1.lenovo.com.cn/lenovo/wsi/Modules/DriverDetail.aspx?ID=3514

  This list shows the Lenovo Windows 7-compatible printers:

  http://www.microsoft.com/en-gb/windows/compatibility/win7/CompatCenter/ProductViewerWithUpdatedFilters?TempOsid=win7&Type=Both&ProductCategory=Printers%20%26%20scanners&CurrentPage=0&TotalPages=35&SortCriteria=Relevance&ShowCriteria=0&Compatibility=All&TextSearch=lenovo&ProductName=lenovo&LastRequested=10&Locale=en-gb

  Kind regards

  Smithy.93

• Jo HP 7500 & print Laser checks?

  Someone had problems with printing laser controls with the HP 7500 to all-in-One printer large Format OLYMPICS?  It will print checks on paper, but I can't seem to print on laser checks themselves.  Says that I added the fake paper but they are 8 1/2 X 11 (the same size).  Have never had this problem with an HP printer and I got a lot!  HP technical support was not at all helpful.  Said it might be a hardware problem, but they have clearly does not cause of I have a high level of confidence that they knew the product's capabilities.

  Hello

  detection of size of support for JO HP 7500 has been improved in the latest firmware, please, try the following

  1. download the JO HP 7500 has EMP1FN1110BR firmware version from the link below

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-89910-3&LC=en&DLC=en&CC=US&OS=4062&Product=4083652&sw_lang=

  2. Once you have updated the firmware, you should be able to print Laser checks using the normal printing mode / project

• Drivers for HP P1005 printer laser window 8 64-bit

  The pilots were suppose to be at the end of 2012. Help, please. HP P1005 printer laser window 8 64-bit.

  Hello

  Have you tried to use the 64 bit Windows 7 software?  This should work for your printer under 64-bit Windows 8.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 3435676

  I am an employee of HP.

• XP simple Yes or no question CP1525nw printer laser

  Printer laser CP1525nw XP supports the operation of (not just USB) wireless network

  BayAreaTerry, welcome to the forum

  Yes, according to thespecifications of the system requirements section / Windows.

  If your problem is solved, please click "accept as a Solution.

• MAC OS 10.4 and printer Office Jet 6700 Premium

  You had to buy a new printer, Office Jet 6700 Premium. Networking Wireless with Windows PC, but cannot install Intel Mac Mini Tiger 10.4.1 running pre. Printer drivers are under MAC OS 10.5 and higher. Is there a work around? I try the installation CD without crashing the computer?

  Hello

  The printer is supported by OS X 10.5 and above, as you can see by the specifications below:

  http://www.shopping.HP.com/shopping/PDF/cn583a.PDF

  Try to set another pilot to get printing features and get a limited feature scan using Webscan via your browser.

  You will not be able to get all the features as the installation will fail on OS X 10.4

  1. In the Application's folder, go to the utilities subfolder and open The printer setup utility.
  2. In the printer list that appears, click Add.
  3. In windows, from the menu above, select default browser.
  4. Highlight the printer 6700 and spend the menu popup using Print .
  5. Select HP in this menu and then locate the HP Deskjet 6500 must fit into the operating system.

  To scan, use the feature of Webscan.

  You will need enable the feature of Webscan first:

  1. From Safari, type the IP address of the printer to enter the Web integrated printer server page.
  2. Enter the settings tab.
  3. Under Security, enter the parameters of the administrator.
  4. Check the box next to Webscan and click apply

  Now, you will be able to scan by accessing the analysis of SAP tab.

  Kind regards

  Shlomi

• Color LaserJet Pro M252n: Lables using Apli approved Laser - ink, do not take paper

  You can see on the image below that is my problem.  I just changed a HP Color laser printer to an OKI: never had a problem before printing. But the document that in Matt and glossy not leave an echo of the image at the bottom of the page. The upper disc sticker prints well but the background image is damaged.

  I assumed it would be as simple as using my OKI laser printer.

  Any ideas please.

  

  You choose the correct paper type in the driver? When you identify the type of paper the printer sometimes changes based on this melting.

  Are you feeding your labels in Tray 1? If this is not the case, try it please.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• I bought an iphone6s from Lithuania, EU. At the back of the box, it is printed "Aproved for use in all countries of the EU". Does this mean that I can't use it in Asia?

  I bought an iphone6s from Lithuania, EU. At the back of the box, it is printed "Aproved for use in all countries of the EU". Does this mean that I can't use it in Asia?

  It does not mean that you cannot use it in Asia. It cannot be repaired in the European Union, however, and may not work with LTE networks in other parts of the world.

• Printer ink system failure message all-in-one HP 6180

  I can't print because of the error message following on my all-in-one HP 6180 printer screen:

  Ink system failure. Refer to the documentation of the printer Oxc18a0201. I followed all the recommendations on documentation of the printer, such as: installation later HP updates, turn off the printer and remove the power cord, remove all the ink cartridges and then putting back in when prompted. Also, I rebooted my computer. None of these recommendations have worked. I need help! Thank you.

  Hello Kah524,

  I met your questions and we have a solution for this and you can try it, but that would apply only on starting with '0xC18A' and not '0xc19a error codes.

  Try the following steps for Photosmart C7280:

  A. - Press and hold the "*" key.

  B. - Press the "#" and release both buttons.

  Display should say "enter special key Combo".

  C. - Press and release in sequence the buttons '1', '2' and '3 '.

  Display should say "Support" and display the FW rev (something like R0631R)

  Press and release the right arrow button until the display shows "Menu of the System Configuration'.

  Press and release the OK"" button.

  Display should say "hardware failure status. If it isn't there already, arrow above for "Hardware failure status"

  Press and release the OK"" button.

  Display should say "hardware failure status: clear." Press OK to erase.

  Press and release the OK"" button. Message becomes "hardware failure (breakdowns) resolved state. Press Cancel to continue.

  Press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the 'ink system failure' is displayed. DON'T TRY TO PRINT AT THIS STAGE.

  Using the power button, turn the power off and unplug the power cable from the back of the printer output and the wall.

  Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, and then to the back of the printer

  Switch on the device. The printer may display message "USE POWER BUTTON CLOSING the PRINTER" followed by "Press OK TO CONTINUE". Press OK.

  If the printer has already initialized, then go to the next step. If this isn't the case, the printer will start the "ONE TIME INK initialization PROCESS". Allow this process to do and not to interrupt. Once the initialization is completed, the printer print a Diagnostic page.

  To check, features of the printer print a PAGE of TEST car. If SELF TEST prints, then printer is ready for use or installation of the software.

  If the error is still there, or reoccurs replace the unit.

  --------------------------------------------------​---

  0XC19a error messages, the printer can be retrieved.

  Good luck and if that fixes the problem please click on Bravo...

  ---------------------------------

  Although I am an employee of HP, I speak for me.

• Need help printing on my C7280 Photosmart all-in-one Printer

  I use a Wireless/1100 Inspiron and have been able to print on my Photosmart C7280 all-in-one printer, but now I can too.  Help, please.

  Hello

  1. what happens when you try to print?

  2 have you made changes on the computer before this problem?

  3. do you get any error code or error message trying to print?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Problems printing and printing errors:

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope the information is useful.

• HP psc 2110xi to print vertical gray lines on all printing (Windows 8.1)

  My hp 2001xi all-in-one psc began to print vertical gray lines on all the text and images on the test document in the problem-solving programs.  I asked troubleshooting this site to uninstall/reinstall it from this site which it has fact/could not, sayiny do my control panel, which is now no longer present the program of hp, or my research could find it.  I am running Windows 8.1 on my ASUS laptop.

  HP Print and Scan Doctor can't find anything wrong.

  I can still print documents with gray lines, obscuring everything.

  April1440

  Thank you for the information about the printer to uninstall for Windows 8.

  The problem of the gray line seems to be now disappeared after a very simple remedy...

  1. disconnect the USB and power cord

  2. plug in USB and power cord

  Tah dah!  Printer's original, more grey lines!

  I got this tip on the site, although the "vertical" illustrate and described were quite different than what mine were.

  Now, if I will be memorized for future reference, as I remember that this remedy has worked for other issues in the past.

  Thanks for the support.  April

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• I downloaded an e-mail 11 long pages - printer stopped on Page 5 of the 11 - However, printer keeps printing starting with Page 11 all over again.

  I downloaded an e-mail 11 pages long.  Transmission stopped on Page 5 of the 11 but the printer keeps printing starting with Page 11 all over again.  How can I reprogram the printer to stop printing?

  Hi EileenBrenner,

  See the below Microsoft article and try the steps to cancel or delete the print job, check to see if it helps.

  How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP

  http://support.Microsoft.com/kb/946737

• Unable to print on hp psc 1350 all-in-one of imac (os 10.6.8) but capable of scanning

  Unable to print on HP psc 1350 all-in-one of iMac (OS 10.6.8) but capable of scanning; also able to print other printers connected to the same computer.  The printer is connected directly via the USB port and I downloaded and installed software for printing on Mac using OS 10.6.  Shows the impression that labour is on hold whatever program originating the print job.  The State of the 'mistake' poster print job, but there is no information about error numbers or other details of the error. The correct printer is selected by default and layout is correct.  The printer has been disconnected, turned off and restarted and the computer has been restarted several times.  Able to print/scan/to 1350 PSC all-in-one of older Mac laptop (OS 10.5.8).

  Additional suggestions are sincerely appreciated.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Bad or missing ink when printing or copying on HP all-in-one and color copier product families

  Click here for a description detailed steps for when colours or black are bad or missing when you print or copy on HP all-in-one and color copier product families.

  Determine if the problem is associated with cartridge

  1. the test report does not print correctly

  Check the estimated ink levels

  Check and clean the ink cartridges and the print carriage

  2. the test page prints correctly (for products only all-in-one)
  Step 1: Verify that the correct printer driver is selected in the software program
  Step 2: Restart the computer
  Step 3: Make sure that the correct printer driver is installed
  Step 4: Verify that printing in grayscale option is not selected
  Step 5: Select a color management profile
  Step 6: Determine if the problem is with the application software
  Step 7: Remove and then reinstall the all-in-one software

  Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

  Best regards
  Kenneth

  I hope this helps!