Printer output

Hello! I am trying to record information generated through the printer output. Everything works except that I record duplicate data. I have attached a correct and incorrect. I'd appreciate any help... Thank you!!!

Hello Kowdtek,

As Fan says Ravens that you not properly concatenate the string with shiftregister data, see the attached vi in which I faked the incorrect data, you found today. also post your code to learn more...

Tags: NI Software

Similar Questions

  • Illustrator CS3 - Print - output - allow me to select color separations

    Hello

    I'm printing for the first time.  The process of preparing should be really simple right?  Separate the layers of color, using Illustrator, then print each layer on transparent sheets.  Well, I'm about to lose my mind.

    The image is CMYK, it is a unique spot color (I think) which is red and the contours are black.  The printer is a Canon ix6500.

    I can't separate the colors in Illustrator CS3?  Why?  When you select Print > output > Mode > it won't allow me to select the halftone colors.

    I tried to solve this problem by selecting the printer > Adobe Postscript and PPD > Canon ix6500 series.  It allows me to select the colors dithered, but then it will not print, it only saves it in PDF format and print such what.

    Help, please!  Any advice would be appreciated!  I'm going out of my mind here!

    Hey everybody!

    I found the solution! So here are the steps, I hope people out there could benefit from this :-)

    This is what worked for me using a Mac and a non-postscript (Canon iX6540), Illustrator CS6 printer, PostScript known as Scribus downloaded software.  My drawing was created in Illustrator and all colors have been Pantone solid coated spot colors.

    These are the specifications that must be selected in the print dialog box:

    General

    • Predefined print: custom
    • Printer: Adobe PostScript file
    • PPD: Lisanet PDFwriter

    Output

    • Mode: Separations (host-based)
    • Ink Options panel can present spot colors that appear in your design.

    Then you save it :-)  This will save as a PostScript file.  To open it, you will need a software PostScript.  One who seems to have done the trick is to Scribus.

    Thanks for any help at all!  Entry everyone ends by helped me to find the solution!

    NATs

  • Printed output problem-RH 9 print drop-down text above its parent text. It serves out below!

    Hmmm I found a problem of bad potentionally for our printed output.

    Our documentation project uses many links of menu drop-down (hyper links where the text below the link in the next paragraph). Documentation was written with her expected the text to come out under the text.

    For example, I have this in my HR propject. When I saw, or when I compile in our output HTML Help (chm), it looks like this:

    A string of text

    Chain of that text a drop-down list appears here

    Text String B

    String B drop down text appears here

    Text of string C

    String C drop-down text appears here

    However, to the printed output, it produces like this:

    Chain of that text a drop-down list appears here

    String B drop down text appears here

    String C drop-down text appears here

    A string of text

    Text String B

    Text of string C

    This is my first generate output printed in RH 9. Previously, we were using 7 HR and aroused as planned, with the drop-down list text to come below.

    Is anyone else seeing this? Do you know a setting or something that might be able to solve this problem?

    Ok. I figured out how to fix it. This was happening in HR 7 too now that I think about it. I hope Adobe will solve this problem, because it's pretty hard to do workaround.

    Here's the background on my project and the solution to my problem.

    Background. It is a project to help straight decompiled html (chm) with high hydrostatic pressure. It was initially generated by RoboHelp 7. I am important in RH 9 to try and generated a textbook printed of this help file. So if you want to reproduce this on your end, create a test project in HR 7 with a drop down link or two. To generate a .chm file. Decompile the chm file and create a file with a LOT of HTML or MS Help Workshop hhp. Open the high hydrostatic pressure inside RH 9. Without change or save all the topics in HR immediately try to make printed output. You will see that the output below.

    Workaround. You must open the assigned topic in the WYSIWYG editor and do a simple (such as adding a space and delete), and then save them then the subject. When you generate the printed output, the drop down links put the image below the parent text. The problem is I have thousands of subjects in this project and it takes FOREVER to solve this problem. I had to resort to a macro during the night opens on each topic, makes a minor change and record before printing. I really hope that there is a way better around this in the future.

  • Problem with the conditional tags in printed output

    I write help files for different versions of our software - version 4 and 5 using Robohelp for HTML 5.0.2

    There is a large overlap of information between the two, so I use a help file joint with marked topics that are specific to version 4 or version 5.

    I went out and then use with 'NOT v4' or "NOT v5" as the conditional tags.

    It works fine in the HTML output. However, I encountered problems with the printed output.

    Ideally, I want the help file using the option "generate the single document" because it means that the document produced, without the single output field. However, when I do, the tags conditional build fail and I get a piecemeal result.

    If I generate the document by using the option 'generate individual documents' tags conditional build work, but I get the only field I want to avoid.

    Does anyone know how to get the conditional tags to work when the option "generate the single document" is selected?

    Pierre and HKabaker - thanks for your comments.

    I think I have the answer now.

    In the properties for the SSL Print dialog, the third screen is the dialogue of section layout. I had removed some sections in the right pane (for example, the default title page, glossary, and index) because I did not want them to appear in the final printed output. It seems that without these sections present conditional compilation tags do not work correctly when the document is released by using the option 'generate a single document ".

    I started again with a "blank" printing of SSL version. Conditional constructions using the "generate a single document" appear to work fine when I leave the dialog layout intact section.

    I can even do the conditional tags build an injustice because the option "generate a single document" (after that I made the changes in the dialog layout section) seems to be that some of the chapters in the table of contents and omitting others.

  • Transposed to printed output levels

    I use RoboHelp HTML 5.0.2.

    When I generate the printed output I've got under the title of the section Heading 1 and heading 2 as a major subdivision in the topic.

    The problem is that some title 1 and title 2 are to be transferred to the output. for example, I have a few topic titles coming out like title 2 with one or more of the heading being changed 2 corresponding to Heading 1 in the section.

    (Title 1 and title 2 seems correct in the true Code - but I don't know much about it).

    You get the same result if you use the existing SAC, Sytle mapping or a Word template on page 4 of the putting in place print options for the output.

    Is it possible to stop what is happening?

    OK, experiment a little, (based in part on Peter remember the effect of "Levels of position").

    I implemented a simple hierarchy with TOC book a parent at level 1, a child book TOC level 2 and a child (children) book TOC to level 3. Each level has a related topic.

    With clamping position levels not verified that level headings have been as follows:

    Table of contents volume 1: title 1
    Table of contents volume 2: section 2
    Book 3 of the table of contents: section 3

    Level 1 section: section 2 of
    Level 2 topic: topic 3
    Level 3 section: Title 4

    With maintaining level position verified that level headings have been as follows:

    Table of contents volume 1: title 1
    Table of contents volume 2: section 2
    Book 3 of the table of contents: section 3

    Level 1 section: title 1
    Level 2 heading: heading 1
    Level 3 section: title 1

    Ideally, I want the print output to have all the books table of contents with the same header and all subjects with the same header. Then I can use a word template customized so that all book TOC names have the same appearance in Word, Ditto all topic names will look the same in Word.

    The way I found that I could accomplish this is to go to the second screen of the wizard to print SSL and use the arrows to put all the books in the hierarchy to the level of the root (level 1). All subjects were then left at level 2. I left the possibility of maintaining the position not controlled.

    The result was:

    Table of contents volume 1: title 1
    Table of contents volume 2: section 1
    Book 3 of the table of contents: 1 title

    Level 1 section: section 2 of
    Level 2 heading: heading 2 of
    Level 3 section: title 2

    Similarly, when I put the title 2 in the headings to indicate major void divisions, they were all converted to heading 3 in the print output.

    The other thing I did was to import the required custom Word template (form 4 of the wizard SSL) and make sure that all my other styles have been mapped across. For example, I made sure that 'Blue "BOLD" ' in the candidate countries for RoboHelp mapped to "" BOLD"blue" in the word template. If there is a style to the CCS (such as "" BOLD"- black') that is not in the template there is a tendency so that it can be mapped to a heading level.

    This method is not ideal because TOC books are no longer in a hierarchy, but heading styles remain consistent, which gives a consistent look in the output of Print SSL.

    (My goal is to get printed output that looks good with a minimum requirement to store it).

  • HP110-230 t: my HP Photosmart printer output goes beyond the printed page margins

    When I speak of a document for printing, the actual production of the printer is in very large font size, which overflows to the right margin of each page. I can't find a way to set the output to the printer.

    Are you

    Glad to hear we're making @Estuprogress. It seems that my suspicion was right, that the question must have something to do with the way in which the program communicates with the driver. SO let's back peddle a moment. I think I asked a couple of times, but as a reading during our conversation I don't see an answer to what program you print from when this happens. Even if it is present for a number of programs please list them. There may be something specific program that we can modify to allow it to work properly with the right driver.

    The PCL drivers are the basis of the printing language, so that they are just much more basic. The goal is to solve the problem and use the driver designed for your printer. Didn't you try to the other pilot for diagnostic purposes.

  • How to prepare the document for print output

    Hi all

    I need to prepare a few illustrations scanned for CMYK printing.  I stay with Lightroom or use another product?  I have Lightroom and Photoshop Elements, but am ready to buy or rent, or InDesign, or something.

    Thank you

    Chris

    LR6 and CC 2015 supports output to a CMYK JPEG file. For a few tips, read the messages from here:

    Re: How to export a file with a CMYK color profile in Lightroom?

  • RoboHelp HTML 10 print output contains the code for all the headings on the pages on the screen.

    Hello

    When I generate output files using RoboHelp HTML 10 printed Documentation, the pages on the screen containing code for all items on all pages. When I print the document, the code has disappeared. Anyone know how I can't view the code on the screen?

    Thank you.

    Please do not take into account. I chose to show hidden text in MS Word and when I disabled the check box, the strange code on the screen disappeared.

  • Colors of the images.jpg/.gif the. CHM and true (4BPP/8BPP) levels of grey in printed output?

    I do all my HR WinHelp first, then exit and Word 2003 document is created. I want to keep the color images in the CHM and that a majority of images become true monochrome gray in the Word doc.

    Yes, Word has an optopn of the OWL 'gray levels' for each image, but it leaves the 'channels' (24 bits per pixel) color and so our color copier prints always page using all colors CMYK (and it never seems to get 'real' grays anyway...)

    If I could somehow get the images to monochrome grayscale in HR, where there are already ones colors - I could save it as 'monochrome' and 'color' outputs.

    Ideas, tips, comments, suggestions, or batch files?

    Thank you!

    On reflection... it's the Fiery controller in the copy machine that makes all decide that what are the components, and unfortunately "it's not my Department', so at this point, the question is moot - this isn't an HR issue.

  • Not a complete print output

    Bought a HP Office Jet 4632 and I wanted to print a 9 page document - double face.  He did it great, but does not print the first 3 pages - only the last 6.  I can't find answers on the maximum number of pages.  Can someone help me?

    Thanks for your help - but first of all, I returned the printer for another model.  Only one did better.  Had to use my brain and finally found the option button to leave the fininsh the entire document print spooler and print it.

  • LaserJet CM1425fn: LaserJet cm1415fn all printed output is faded

    I have a MFP HP LaserJet CM1415fn I've had since 2011.  It has always worked perfectly until recently when printed pages started out very thirsty.  My first thought was that the toner cartridges are at fault despite still a significant amount of toner left in them.

    I replaced the cartridges by official HP cartridges, as always, but the print quality remains in the same State faded.

    Can someone offer suggestions regarding if it is a question can be resolved so I have to accept that my CM1415 has reached the end of its life?

    Thank you

    Hi @avataruk,

    Thanks for getting back to me.

    From what you describe. Looks like there's a hardware with the printer.

    I don't have the details for the maintenance for your printer options, but HP may offer you a discount toward a recovery on a replacement unit. Please contact HP.

    Hope that answers your question. Thank you for posting!

  • Too light to read the printer output.

    Most of the documents to print OK. However, answer box indications on labels printing is too light to read.

    Low to the attempt of ink filling or replacing your cartridges. If this post answers your question, click mark as answer .

  • HP ENVY 114 e-all-in-one printer output tray Extender does ' t open or close when printing

    The tray Extender out on my HP ENVY 114 e-all-in-one printer is not open or close when I print. Currently it remains open all the time so it's not the amount. It started when I had a paper jamb because transport has not opened.

    New impressive @Barkingloon 

    If you have a moment, please click the button of "acceptable Solution" on my last message (Message 2), for others in the community can find thread too in case they run into the same problem.

    Have a wonderful Monday

  • How to print output in a single file at the command prompt

    Hi all

    I am running windows, 11.2.0.1 64bits.

    want the output to a single file below.

    dBV file is D:\ORACLE\ORADATA\ISITEPROD\SYSTEM01. DBF blocksize is 8192 logfile = D:\Newfolder\logs\New\SYSTEM01. DBF.log

    dBV file is D:\ORACLE\ORADATA\ISITEPROD\SYSAUX01. DBF blocksize is 8192 logfile = D:\Newfolder\logs\New\SYSAUX01. DBF.log

    dBV file is D:\ORACLE\ORADATA\ISITEPROD\UNDOTBS01. DBF blocksize is 8192 logfile = D:\Newfolder\logs\New\UNDOTBS01. DBF.log

    dBV file is D:\ORACLE\ORADATA\ISITEPROD\USERS01. DBF blocksize is 8192 logfile = D:\Newfolder\logs\New\USERS01. DBF.log

    dBV file is D:\ORACLE\ORADATA\TS_SITE. DBF blocksize is 8192 logfile = D:\Newfolder\logs\New\TS_SITE. DBF.log

    I don't want 5 different .log files, (it is a batch file content), I want only 1 file output (with the data of all the outputs of annexed cmds).

    Please guide me.

    Kind regards

    Syed

    Hello

    This could help you.

    https://bitbach.WordPress.com/2009/08/14/redirecting-DBV-output-to-a-file/

  • Colors are inconsistent between the photo and the printed output. The tones of the printed output are disabled.

    It is a HP Photosmart Plus B210A printer.

    I have almost nine cartridges installed (correctly).

    I did a print quality test and the test page seems to be very good.

    The book that I use is photo of high quality printing paper.

    I use the quality setting of the 'best '.

    Thanks in advance for any advice.

    The problem has been resolved with the link you provided «in regards to material...» ».

    Thank you very much for your help.

    YOU ASKED ME TO SAY IT'S RESOLVED - I CAN'T FIND WHERE DO.

    Can you please answer with where it is?

    Thank you. Jennifer

Maybe you are looking for