Illustrator CS3 - Print - output - allow me to select color separations

Similar Questions

• Need serious help!  Cannot print anything in illustrator cs3

  I recently installed snow leopard and installed a cleansing of all applications including cs3.  Since the new facility, illustrator goes to "not responding" when I select file > print or press cmd - P.  I can print from photoshop very well, it seems to be just illustrator.  I have not tried all the other cs3 apps, because I don't use dreamweaver and bridge, but never print form them anyway.

  For printer drivers, I used those who came on the 10.6 installation disc, because the website of canon says that their drivers were for up to 10.5. Not sure that the disc is not just the same driver that they list, but I can print all applications on the computer except for illustrator that I REALLY need.

  I sent a ticket to adobe, but he said it would take 3 or 4 days to respond and I'm in the middle of a job to print today or tomorrow, not next week!

  If someone has had this problem and can I do?  In the meantime, is there another way I can print a file in illustrator to actual size?  I need to print actual size and Illustrator is the only way that I've never done.

  Thanks for the help.

  Yes, he regenerates a fresh new.

• When I print a document in framemaker to PDF option in PDF Setup > bookmarks > bookmarks expanded through level do not allow me to select 'none '.

  When I print a document in framemaker to PDF option in PDF Setup > bookmarks > bookmarks expanded through level do not allow me to select 'none' or 'default', etc. I can only select the number that shows.

  

  This entry dialog also allows you to directly enter the value. Type 1, 2 or 3 according to the needs.

• I can not save or print with Illustrator CS3

  Illustrator CS3 worked fine on my old laptop... until the death of this laptop.

  So, I installed it on the laptop replacement, but I can't save or print my work, making the program useless.
  I can open documents very well and do all the work I want to without any problem, but it is not good if I can't save or even printing.

  Windows X
  Thanks for any expert help on this!
  How can I live without Illustrator?

  Run the program in compatibility mode Windows 7 and check your file permissions and user privileges are sufficient.

  Mylenium

• Illustrator CS3 is what I use.  I can't select only the work of export in JPG or PNG format.  When I do, it exports the entire workspace.  I want just the artwork in a jpg file.  What are the instruction sets to convert only the number of art work

  Can someone tell me how to export my object of works of art in a PNG or JPG?  I get the whole workspace saves when I export.    I want to export a label to another program to print and the entire workspace is in the JPG, including not only art, I want to, but something else that is located on the workspace.       How can I simply isolate the object I want to export and convert? Newsgroup_User

  Randy,

  You can create a rectangle the size of the work and the object > crop area > make, then save for Web.

  Or you can use the crop box tool, see the documentation or here.

  http://DesignerToday.com/tutorials/Illustrator/4822/using.the.crop.tool.Illustrator.CS3.TU torial.aspx

• Create a newsletter printed in Illustrator CS3

  I can't afford more software, I have CS3 Web packaging design.  My question; is it possible to create a newsletter 2-3 panel with Illustrator CS3 and if possible, can you point me to a tutorial video/so I can start?

  Thank you...

  Hello

  Thanks for your reply. Illustrator is a very good tool to create a brochure.

  I found this tutorial which helps you create a brochure "tri-fold":

  http://www.Adobe.com/DesignCenter/Illustrator/articles/illcs2brochure/illcs2brochure.PDF

  I think this goes much help your needs!

  Let me know how it goes,

  Vicente Tulliano

• Illustrator CS3 incorrect impression

  Hello

  First of all, I should probably clarify that I am not a professional graphic artist/printer.  I am a graduate student of architecture that has an Epson R1800.  Photoshop CS3 printing seems to work very well and I'm getting a reasonable representation of colors (after configuring proof, turn off the OS X color controls, etc.).  If I try to Illustrator (and InDesign) I get very poor quality prints.  In Illustrator, so that I have my proof set up my Epson paper I use and my printer settings are as follows:

  Color management: Illustrator determine colors

  Printer profile: SPR1800 Standard (right now I just need a few black line drawings on plain paper)

  Render mode: colorimetric Relative

  Now, if I change my print settings in Illustrator, I don't see any change in printing.  If I try to make changes by the "printer" window (after selecting the file > print > printer), I get a warning dialog and still nothing seems to change.  If I export an EPS or PDF and printing out of Photoshop, I get great prints.  I would like to cut the middlemen (PS) and print directly from Illustrator as opposed to the export of many drawings and printing from Photoshop.

  Any help is appreciated!

  It is a known problem in Illustrator CS3 and Indesign Cs3, see the discussion in the son:

  http://forums.Adobe.com/message/1078387#1078387

  http://forums.Adobe.com/message/1279435#1279435

  Al

• I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

  I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

  What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
  e '.

  example of extractedb.txt information:

  [email protected]

  [email protected]

  [email protected]

  * has a random number of emails as well *.

  I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

  Any help would be great = D

  Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

  game of mf to ((path to the folder as text) & "mail_list.txt")

  the value mf_List to {}

  the value sel_addr to {}

  the value mf_List to paragraphs of (read file mf)

  the value sel_addr to (choose from the list mf_List with title ¬

  ('Mail list' with multiple selections allowed without empty selection allowed)

  If sel_addr is equal to false then

  Error number-128

  return

  end if

  If length of sel_addr is equal to 1 then

  sel_addr display dialog box as text

  on the other

  the value Point to the text of TID to AppleScript delimiters

  the value Point text in AppleScript return delimiters

  display the dialog box elements of sel_addr in the text

  the value Text of point AppleScript delimiters to TID

  end if

  return

• Illustrator CS3 crashes when changing places during save or place. Mac, Yosemite

  After the update to Yosemite and fixing the original problem of not being able to open Illustrator (older Java installation). Now Illustrator crashes whenever I try to select a location to save the file. If I save without changing the location of the file is not a problem. Also, it crashes when I want to PLACE a file and I try to navigate to the location.

  MacBook Pro (2012), OSX 10.10.2 (Yosemite).

  Adobe Illustrator CS3 (Yes, I know).

  Change fonts doesn't seem to be a problem. Large files are OK. It is only when you navigate to a location using a drop-down menu in the SAVE AS or PLACE dialog box.

  Any ideas of what might be wrong?

  New information: I changed the format of the adobe dialog box and it solved my problem. I'm leaving HERE in the case that everyone is facing it. However, I wouldn't mind know why it will not work the OS dialog box.

• Backsaving an eps from Illustrator CS3, CS2.

  I created a BPA using Illustrator CS3. However my client wants me backsave eps in format CS2 because that's the only way that the printer can print.

  Can someone show me how to do this please?

  Thank you very much

  File > save as. really. Yes, really. Try it.

• Ligatures of abandonment when ID CS3 printing on a printer of the PS3

  Just got a new Dell 5110cn and this problem is driving me crazy.

  InDesign CS3, Vista 64-bit. Use the PS3 for the 5110cn driver, not the driver PCL.

  I disabled the device font substitution in the pilot. I entered in the table of substitution of fonts and put all "do not substitute".

  When I print directly from ID CS3, ligatures "fi" in words like "certificate" or "check" abandon.

  The policy in question is 'Times '.

  If I export the document to PDF, ligatures discovered very well and print very well from the PDF file.

  Illustrator EPS files created with the word "certificate" which are then deposited in ID CS3 print correctly when direct printing.

  I can print from MS Word documents that contain the word 'certificate' both directly to the printer and those print very well (but as far as I know, Word is not using the same method of ligation).

  While this is a new printer, the behavior apears to be isolated to InDesign (print directly from Adobe Illustrator is very good as well).

  What gives?

  Have you checked the box download PPD fonts in the print dialog box?

• Problem with the conditional tags in printed output

  I write help files for different versions of our software - version 4 and 5 using Robohelp for HTML 5.0.2
  
  There is a large overlap of information between the two, so I use a help file joint with marked topics that are specific to version 4 or version 5.
  
  I went out and then use with 'NOT v4' or "NOT v5" as the conditional tags.
  
  It works fine in the HTML output. However, I encountered problems with the printed output.
  
  Ideally, I want the help file using the option "generate the single document" because it means that the document produced, without the single output field. However, when I do, the tags conditional build fail and I get a piecemeal result.
  
  If I generate the document by using the option 'generate individual documents' tags conditional build work, but I get the only field I want to avoid.
  
  Does anyone know how to get the conditional tags to work when the option "generate the single document" is selected?

  Pierre and HKabaker - thanks for your comments.

  I think I have the answer now.

  In the properties for the SSL Print dialog, the third screen is the dialogue of section layout. I had removed some sections in the right pane (for example, the default title page, glossary, and index) because I did not want them to appear in the final printed output. It seems that without these sections present conditional compilation tags do not work correctly when the document is released by using the option 'generate a single document ".

  I started again with a "blank" printing of SSL version. Conditional constructions using the "generate a single document" appear to work fine when I leave the dialog layout intact section.

  I can even do the conditional tags build an injustice because the option "generate a single document" (after that I made the changes in the dialog layout section) seems to be that some of the chapters in the table of contents and omitting others.

• How to store the output of a statement select * statement in a file?

  How to store the output of a statement select * / statement of dsc in a file?

  As user sys:

  CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
  /
  GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
  /
  

  As myuser:

  CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                       ,p_dir IN VARCHAR2
                                       ,p_header_file IN VARCHAR2
                                       ,p_data_file IN VARCHAR2 := NULL) IS
    v_finaltxt  VARCHAR2(4000);
    v_v_val     VARCHAR2(4000);
    v_n_val     NUMBER;
    v_d_val     DATE;
    v_ret       NUMBER;
    c           NUMBER;
    d           NUMBER;
    col_cnt     INTEGER;
    f           BOOLEAN;
    rec_tab     DBMS_SQL.DESC_TAB;
    col_num     NUMBER;
    v_fh        UTL_FILE.FILE_TYPE;
    v_samefile  BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
  BEGIN
    c := DBMS_SQL.OPEN_CURSOR;
    DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
    d := DBMS_SQL.EXECUTE(c);
    DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
        WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
        WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
      ELSE
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      END CASE;
    END LOOP;
    -- This part outputs the HEADER
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
    FOR j in 1..col_cnt
    LOOP
      v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
    END LOOP;
    --  DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
    IF NOT v_samefile THEN
      UTL_FILE.FCLOSE(v_fh);
    END IF;
    --
    -- This part outputs the DATA
    IF NOT v_samefile THEN
      v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
    END IF;
    LOOP
      v_ret := DBMS_SQL.FETCH_ROWS(c);
      EXIT WHEN v_ret = 0;
      v_finaltxt := NULL;
      FOR j in 1..col_cnt
      LOOP
        CASE rec_tab(j).col_type
          WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                      v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
          WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                      v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
          WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                      v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
        ELSE
          v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        END CASE;
      END LOOP;
    --  DBMS_OUTPUT.PUT_LINE(v_finaltxt);
      UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
    END LOOP;
    UTL_FILE.FCLOSE(v_fh);
    DBMS_SQL.CLOSE_CURSOR(c);
  END;
  

  This allows the header line and the data to write into files separate if necessary.

  for example

  SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
  
  PL/SQL procedure successfully completed.
  

  Output.txt file contains:

  empno,ename,job,mgr,hiredate,sal,comm,deptno
  7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
  7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
  7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
  7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
  7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
  7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
  7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
  7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
  7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
  7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
  7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
  7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
  7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
  7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10
  

  The procedure allows for the header and the data to separate files if necessary. Just by specifying the file name "header" will put the header and the data in a single file.

• Boxes that allowed me to select the emails have disappeared

  Boxes that allowed me to select the emails have disappeared.

  In Thunderbird, you use methods of standard selection on the computer.

  Click on a message to select it, then control + a = select all

  Click on message 1, up or down several messages and hold the SHIFT key while clicking on the message 2 = messages selects one and two, and all the messages between the two

  Hold down the CTRL key while clicking random messages = SΘlectionner any message clicked on

  Hold down the CTRL key while clicking on a selected message = deselect this message

• Printer output

  Hello! I am trying to record information generated through the printer output. Everything works except that I record duplicate data. I have attached a correct and incorrect. I'd appreciate any help... Thank you!!!

  Hello Kowdtek,

  As Fan says Ravens that you not properly concatenate the string with shiftregister data, see the attached vi in which I faked the incorrect data, you found today. also post your code to learn more...