Printer problems - prints extra paper

Similar Questions

• problem of 8600 printer install paper tray

  I've been reloading the paper tray and impossible to insert the tray into the printer.  Out of the printer, it sticks about six inches.  Can't see anything blocking it and the paper is inserted correctly.

  Hello AJayR,

  Welcome to the HP Forums.

  I see you have a problem with the paper tray goes all the way back into the printer.

  I suggest that you take a look at the sliders on the paper tray and the printer to make sure that nothing has caused a blockage and if it is clear and the tray still won't, the next step would be to call HP Total Care.

  I suggest to call the HP Technical Support to see all the other possibilities for you if you can not always get the tray in the printer. This could be a hardware problem with the printer. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• 1315 all in one printer: my 1315 all in one printer shows "paper jam".

  My 1315 all in one printer shows "paper jam" even if I can copy directly, and it has good connection with the computer, there is no jam. I also changed the ink cartridges to see if that helps - it is not.

  Thank you for your help. I tried everything, but it didn't work. In the end I tried to change the port to USB port on the computer and we are back in business. The printer was the problem, it is the port. I hope this helps someone.

• You are using windows 7, how can I get my Officejet Pro K8600 print on paper 13 x 19?

  I bought a laptop with Windows 7. Now I can't get my Officejet Pro K8600 to print correctly on paper 13 x 19. It prints on paper 13 x 19, but everything is 8.5 x 11 in size. I click on print, click Properties, change the Super B 13 x 19 paper, press ok, watch box paper 13 x 19 with images by filling out the document, I click ok to print and it prints the image 8.5 x 11 in size on paper 13 x 19 rather than fill the paper 13 x 19. I did not have this problem (and still haven't) with my old laptop with XP. It is the operating system or is it a bad setting in the properties? I tried to compare the property settings in both computers, but I can't find any differences. I don't think it's the driver... Please help!

  Hello HW,.

  Try this: go to devices and printers and right click on the of K8600 Officejet Pro and click on printer properties. Go to the Advanced tab and click on the button called Print Processor. Select Winprint. Try another print and see if it works now. If you still see the same question to see if there is an option of scaling in the print dialog in the application you are printing from.

• Printing on paper 8 x 12 photo

  I am new to this community and relatively new to the use of my Pixma Pro-100.  I just got the impression a lot of pictures of a recent photo in Botswana safari, and I have problems printing on paper 8 x 12.  Because the proportions of some of my photos to the size of 8 x 12 and would look nice in that size, I bought some media Inkpress paper chandelier in size 8 x 12 B & h.  They told me the specifications for this document are already loaded into the printer Pixma Pro-100, so I thought that it would not be a problem.  However, no matter what I've tried so far, I can't have the printer to print on the paper without leaving a border approximately 1/4 "white on one of the short edges.  I tried to resize my picture at exactly 8 x 12 size; in the print (through the Photoshhop items) menu, I selected the correct printing size, 'size' real and then the slider a bit to fill the preview with the photo frame. has tried no border and no - without margins.  The problem seems to be with the selection of the paper size. There is no selection 8 x 12, and the selection of 'custom' won't let me choose the size and instead gives me an error message saying: I put the wrong numbers and he will choose the closest size to you.  So I get this darn unique border!   The only way I could print my photos of 8 x 12 of to lose a big piece of photo paper and print the 8 x 12 in the middle of it and cut.  There MUST be a way.  I don't really like this printer and she gave me great photos to research.  But I want to know if possible to the thing of 8 x 12.   Is there a printer driver or something like that is needed?  I'm not totally computer/printer warned, but I think I could install a new printer driver, if I had to - and if it wouldn't screw up my printer by other means. In the meantime, I'll just go on the waste of paper, I guess.

  Thanks for any advice,

  Mary

  I had a problem getting 8 x 10 to fit on 8.5 "x 11".  I downloaded the Canon Print Studio Pro, in the latest version.  He has contributed to some extent, but what it does is it reduces images to 6.75 x 8.5.  I think I can adjust parameters of borders.  So, check for the latest version of the driver... help!

• I have windows vista, my printer is working paper is fine, but nothing is printing on paper there is ink.

  just installed my hp deskjet D4260 printer as I said it is running, the document is fine, but nothing good print on paper.

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to follow the links and check out them.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• Printer has paper, but the computer says that it is paper and print not web

  I have trouble getting the computer to recognize that the printer has paper. The printer prints copies that I put in, but when I want to print from the web, it doesn't let me do; He told me just the printer's paper. I printed a few pages on the web yesterday without any problem at all. I have a HP Deskjet F2430.

  just do a restore to an earlier date and which corrects the problem.

• HP Officejet Pro K5400 print extra page after each print job

  I've updated HP software version 2.16.1 on my version of Mac OS X 10.7.5. After the update of the printer still prints an extra page after each print job. This delays the work according to the printer, because the printer flashes for about 5 minutes, then prints extra page and there always several 2-234 X. Don't know how to solve this problem, I already checked that the software is up to date. Is it possible to go back to a previous version of the HP update until a solution is found?

  Hi kajuntwin,

  The patch is now available, you can install it from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-126392-1&cc=us&DLC=en&LC=en&OS=4159&product=1146331&sw_lang

  Kind regards

  Shlomi

• Cannot print thick paper my hp laser jet 2840

  How can I print photo paper thick 200 g/m² on laser jet 2840 hp printer it keeps jamming. How windows 7 64 bit hp Pavilion

  What bin you're impression of?  Have you tried to use the 1 vs tray 2 tray, etc.?  Change the tray will often change the paper path and therefore has the possibility of interference do not leave a different bin.  I recommend the Tray 1.

  However, avoid adding print to Tray 1 so that the printer prints or jams may occur. Do not fan paper before loading them into trays and avoid overloading the trays.  Also, be sure to configure the tray properly - make sure it is configured as brilliant - Extra heavy or glossy cardstock.

• 6500 a more used to printing on paper of the greeting card

  I have a 6500 a more who will not print on paper greeting card greeting card, but it will be printed on thinner paper for typing. It starts printing and stops to say paper is of a good size. I guess it's to measure the thickness. This problem started just as she had worked perfectly before I tried to print a picture of my camera card.

  I'll send you a PM with additional instructions, follow this guide and let me know how it goes!

• Module - registered models of user - broken printing! -Paper: (none)

  Hi all, I recently got a new printer and now it would appear that my models registered earlier (before the new printer) in the print Module user is no longer defined the size of the paper properly which means that the print page stored in the template of the user is all messed up.  Specifically the user models I speak, the place where originally thrown out on paper 13 x 19 and when I select the user model is displayed by default back to a paper size 8.5 x 11 (but the print module reports it as paper: (none) and LR greenhouse just the layout of photo in the small size of paper 8.5 x 11 all overlapping.)

  If I create a new page layout 13 x 19 and save it as a new model of the user, it works as expected.

  I can tell you also that all previously recorded prints within the Library - Collection also seems to be broken in a similar way.  IE when I select the arrow next to the print icon (which takes you to the print module) Watch also printing on paper: (none) but looks like 8.5 x 11, when it used to be on a paper size 13 x 19.

  All I can think is that it was at the time of the new printer.  Left an Epson Stylus 1400 for a P600 Epson if it helps people to solve the problem.

  LR CC 2015.5.1 on Win10 64 bit running.

  Issues related to the:

  -A anyone else seen this problem?

  Is there a solution?

  -Are there a way to "restore/fix" user saved earlier models or impressions recorded in a paper size 13 x 19?

  -Do LR saves in the saved drawings or models of user information' "personal printer"? ""  (I would have not thought so)

  Thank you

  Tyson

  A new printer!

  You will need to choose a model---

  GoTo [Page Layout]

  Select your new printer

  Select the paper size and other options in the printer dialog box

  Close printer dialog box

  Right-click on the model in the Model Explorer Panel and choose "Update with current settings"

  I think that using your 'old' printer models will not work!

• 7200 printer: photo 7200 printer acts like it is printing, but paper comes out without any ink

  I tried to print photos.  The printer pulls the paper of photo through the machine and acts like it is printing, but paper comes out the same as it began.

  I was unable to print a document, machine not to copy, use genuine hp cartridges, some levels many other low, but non-printing ink.  In fact, I disconnected power to the printer and restarted, it.  Subsequently, he printed as it should.  Thanks for your help.

• Office jet 6700 Premium: printer Extra - how can I get rid of him?

  When opening HP utility for the HP OfficeJet 6700 I have two different printers.  It seems easy to remove one of them, but the Uninstall button (the sign less down the list of devices) is grey.  Does anyone know a way to undim on the button uninstall so that I can remove the printer 'extra '?

  

  Hello

  No, please keep the extra. Now you have two logical printers for the same physical printer direct printing support and the second using your wifi network. You can use both.

  Kind regards.

• Photosmart 7515 prints on paper bond, rather than on photo paper. How to solve this?

  I printed on paper photo on this printer in the past, but I don't remember how and instruction book is no help;

  Go to your printer on your computer preferences.

  1. Start Menu---> devices and printers---> right click on the printer

  Select the appropriate paper type, and then click APPLY.

  It gives you any kind of error message?

• OfficeJet 4500 wireless cannot print bold paper for comics cards

  rumblings of the printer and jump but will print normal paper fine - only growls with a stock of Council and stttutters

  OK, please check your Inbox to private message for options to reset, I send you.