Printer will not print to the exact image or document

Similar Questions

• I need to PRINT from the internet, images and documents sources sites into one (multi-page pdf document) > > save this PDF document > > then an email to customers.

  I wonder if anyone can help with Acrobat Pro X 1 question.  We must be able to print from multiple sources in a single PDF from multiple page.

  Not create multiple documents and then combine them, but have the multi THAT generated when printing PDF page.  I don't see any instructions on that.

  Please notify.  Thank you.

  There is no way to do the way you want to do, so you will need to do the way you want.

• Desktop screen will not scroll all the selected images

  Using customization / Desktop / background, I have a directory selected with more than 30 photos in there. I select all to move every 30 minutes for my 2 monitor that I use on Windows 7.  But it is inevitable he will stick on a photo and stop every 30 minutes until what I left in a reselect all the photos of cycling. What happened since I installed Windows 7.  Ideas on that. Very annoying to say the least!

  Hello Chris,

  Thanks for the reply.

  Before starting with the next steps in troubleshooting, I would like to know if you have any third-party program/software installed on the computer desktop customization?

  As the steps to rename the TranscodedWallpaper.jpg has not helped, you can try the troubleshooting steps below and check if they help you solve the issue.

  Check the background setting in Power Options

  • Click Start, type Power Options in the Start Search box, and then click Power Options in the list.
  • In the Select a power plan window, click change plan settings next to your selected power plan.
  • Click change advanced power settings, and then expand the desktop background settings option.
  • Expand the slide show, and then make sure that the option of sector is set to available.
  • Click OK, and then close the window changes to the plan .

  Check the context parameter to delete in the accessibility settings

  • Click Start, Control Panel, accessibility, and then click accessibility.
  • Under explore all parameters, click on the make the computer easier to see.
  • Make sure that the option to remove background images not selected not.
  • Click OK twice, and then close the accessibility window.

  Let us know the results of the troubleshooting steps, so that we can help you further.

• CS5.5 will not - install "eject the disk image.

  I'm trying to reinstall InDesign.  But get a error message "Install can not be opened. You must eject disk image. »

  I saw this message on a few forums, but no solution has been given.

  iMac OSX 10.7.5

  I don't have a problem with other facilities, just this one.  For example, I ran the CS5.5 "patch", and worked well (but it had nothing to patch on, of course).

  History:

  I did a reinstall of CS5.5.  But he had a few more questions (slow), so I thought I would do a complete uninstall-reinstall.  And now I get the above error message.

  Immediately before this problem, I had already done a CS5.5 installation without any problem.  It was only after I did the uninstall, begun by installation problems.

  I also tried a 'own CC', as shown in the manual, but there is nothing to clean up.

  Another forum said trying to install OSX 10.7.5, but I'm already on OSX 10.7.5.

  I'll try to re - download the CS5.5 installation file again.  But as it takes 3 hours to download, I'll go to bed and let it download and try to install it in the morning.

  BTW:

  Already checked disk permissions and disk repair - no problem.

  Already verified security clearances and it is on 'download from anywhere '.

  R

  Hello.

  Solved my problem.  The previous suggestion of the fix was correct - and you're doing what he 'Terminal Mode' which is located in the user library.  Simply type:

  xattr - /Users/***/Downloads/InDesign_7_5_LS1.dmg c (make sure it is the correct path to the Setup file correct you have problems with).

  I did it twice, as once did nothing (spelling?).

  In any case, now Adobe InDesign is fortunately installation.

  Happy Days... ;-)

• Object will not align with the guide in my document.

  I'm working on a chart and eventually align parts with a guideline. And the graphics keep bouncing off the guideline to the left or to the right, up and down as I drag the object to the guides. I use Illustrator CC14 on a Macbook with OS X 10.9.2.  Not sure if you prefer that I have to turn on or off. I turned off the snap to point and snap to grid. Help. Thanks in advance.

  IvyLeaf,

  In such cases, the first assumption is aligned to the pixel grid

  You can select the entire document and untick finally align on the pixel grid in the transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• Simple animations 3 images will not play in the browser preview

  I'm new to this game, just trying to understand the best platform to create EXTREMELY SIMPLE rotations and sign minor animations for HTML5 ads.

  I did a test with 3 images of solids, just their animation to each out fad at one point and now it will not preview in the browser correctly - it shows just the first image as static.

  I'm sure I'm missing something extremely stupid and just can't find it. Help! PLEASE, I BEG YOU!

  Check out my old tutorial but the principle still applies.

  Targeting of the symbols: discovering the mystery l EdgeHero

• Why my selected image will not appear on the chassis of the big money develop?

  Why my selected image will not appear on the chassis of the big money develop? It appears on the left side, but I see only a blue box with an X in the middle of the big Frame in the Center?

  Go to your Lightroom preferences, performance tab, uncheck the box use the graphics processor.

• HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger

  HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger. I tried a reboot, including disconnect the motor from the power analysis. A software update was just pushed through today as well, but the problem with the scanner was before this update. This update took place after the power has been turned off, then on again.

  The problem occurred this morning during a prior scan + back. I heard a click or pop/fast spin, something that indicates something was wrong, when he tried to feed on the 1st backsheet through for the scan of the back. Now, it won't take what anyone, even to make a copy using the feeder.

  When I look at the roll holder bar above paper, I noticed that it does not drop down to make contact with the paper he move to the scanner itself. I remember having this problem once before - there are 2 years, while the warranty was still in effect and does not remember how it was resolved.

  Any suggestions would be welcome. I don't want to buy another printer just to get the scanner to feed again. The printer itself is fine and scan from the bed is not affected.

  For anyone interested, I sloved the problem of roller scanner do not push the paper into the ADF.

  I turned off the printer last night. Today, I removed the power cable at the back of the printer and then unplugged the power cord from the wall. It was off for about 30 minutes. I reconnect the cable to the printer and the wall, the printer running and waited about 10 minutes. So tired the charger scanner again. It worked and I don't know why.

  Yesterday, I tried a version of what I found in the documentation for HP support. He said to do, but not to turn the printer off first. He has not worked for me.

  I don't know if my path has really had no effect on the results, but it works now and I don't have to think about buying a new printer for awhile yet. I like this idea!

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• HP Officejet 6500 a Plus-710n, multi-page document will not feed through the top.

  There is no error messages, just won't get out the paper. I am able to scan from the glass top, individually, but will not feed from the top on several pages.

  Hi Ginny29,

  I see that you are having problems with your printer.  I'll take a look at the document below.

  OfficeJet 6500 has

  Let me know how it goes.

• J6450 will not scan since the upgrade to snow leopard

  My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)

  You scan the front of the unit?  The software included in Sl does not support that.  Also note the HP Scan Pro included in the 10.5 software will not work with 10.6.  The 10.5 software and delete the print queue.  Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540.  You should be able to scan after that.

• Images JPG, stored in DB, are not displayed on the screen/image.

  Hi friends,
  
  I have a form to save and retrieve images (JPG, GIF, TIF) to and from the DB, using WEBUTIL_FILE_TRANSFER. CLIENT_TO_DB and CLIENT_IMAGE. WRITE_IMAGE_FILE respectively.
  It works fine, but with few JPG images, it stores in DB, but not displayed on the screen/image.
  Second, if I try to retrieve and write the JPG to the operating system (using CLIENT_IMAGE. "" WRITE_IMAGE_FILE), he invited error "FRM-47101: cannot write the file image.
  
  Environment:
  Forms [32 bit] Version 10.1.2.0.2
  Operating system XP Pro 2002 SP3
  Oracle DB 11 g Enterprise Edition rel. 11.1.0.7.0 - 64 bit
  
  Any help will be much appreciated.

  Hello

  Some recent JPEG formats are not supported by the forms. I can't tell you exactly what, but I have already noticed that some images could be made only by the forms. The only solution is to save the images with another program to transform the internal format to a recognize an or use a Java Bean able to read all of these formats.

  François