Printer wireless and 2 IPads

I just connect my IPad to a wireless HP Deskjet 3512. It took a while to understand. Now, I want to connect another IPad on the same printer. How can I do this? Thanks in advance... doc

Hello

Your printer supports BOTH ePrint & AirPrint so you can configure EACH iPad for AirPrint:

http://www.Apple.com/support/iPad/Assistant/AirPrint/

For ePrint, you send and email to your email address or printer using the HP/Apple apps still once for EVERY iPad:

http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

Kind regards.

Tags: HP Printers

Similar Questions

  • I have HP J4550 printer - this allows to print wireless from my iPad?

    I think easy question - is wi fi specific spec on the printer? I a J4550 and don't know if it can be used as a wifi printer. I have wireless in my house and an ipad

    Yes, this printer can be connected wireless.

    Here are the steps.

    1 configure the peripheral equipment (see the getting started guide or the power supply that)
    supplied with your device).
    2. on the device control panel, press the Setup button.
    3. press an arrow to go to wireless Menu and press OK.
    4. press an arrow to go to the installation wizard and press OK.
    5. follow the screen instructions to complete the installation.

    You will NOT be able to use the iPad to print, however. You will need a printer that can (e-print).

  • Need help with printing wireless and Air of printing

    I have a Xerox printer connected to an Airport Express station and I was able to print wireless from my Mac. I just replaced the Xerox with a Brother printer which has built in WiFi and Air feel, although I can't get anything to work. I entered my password WiFi network directly on the printer. The instructions had me download the drivers that I did and I download a wireless configuration program that asked more than about nothing if I already entered my password of the WiFi network of the printer.

    1. I do not remember how I already had the Xerox facility to print wireless from my Mac. I just plugged a USB cable directly linking the Airport Express to the Brother printer to bypass the built in Brother WiFi and use the Airport Express for internet.

    2. any thoughts on the use of construction vs the Airport Express WiFi?

    3. what should I do do AirPrinting work?

    Thank you.

    Post edited by: southwestform

    I use an Epson printer set up as AirPrint rather than as a brother, but I expect the two similar configurations.

    All I had to do first was installing the printer on my network domestic wi - fi.

    Then in system preferences > printers & Scanners

    Select Add printer

    Select the printer and set its AirPrint and add

    What printer model is Brother and in fact specifies that it is compatible AirPrint, or just a Wi - Fi connection?

  • DeskJet Ink Advantage 3635: Cannot print wireless and scan

    Shop I bought says it is compatible and when I brought home for them to check, they could not solve my problems.

    Can not find the model on the list. HP team, is it compatible? What can I do?

    Hello

    Thank you for choosing HP. I understand that you are unable to install the printer wireless operating system windows 10.

    DeskJet 3635 is not compatible with the operating system windows 10.

    Thank you

  • Is it possible to have a connection to printer wireless and wireless Internet at the same time with Windows Vista?

    I'm trying to connect my wireless printer while maintaining my wireless internet connection. Is this possible?

    Hello ScottWatt,

    Thanks for your post.  Yes, however, there is a specific way to go about it.  Since you have wireless internet, you probably have a wireless router.  In this case, you must change your printer settings to connect to the router. You can find information on how to do this either through your manual, or online from the manufacturer's Web site.

    Then you would connect your computer to the Wireless internet connection as well.

    From there, both your computer and the printer would be on the same network, just install the printer on a network and you can surf the web and print wireless.

    See you soon

  • My Officejet 6500 more suddenly stopped printing wirelessly from my iPad 2

    After working perfectly for several months, my 6500Plus HP E710n Officejet-z does not print wireless from my iPad2 or my iPhone 4 s. I use version 5.0.1 on these devices and had used this version before that the printing problem. I get the following message: "Officejet 6500 E710n-z [11E2A9] the printer is no longer available." The printer works fine (without thread) of my MacBook Pro in OS X 10.6.8 version. I "think" that there was an update from HP before it started, but I'm not sure of the timing. Any ideas on how I can get these mobile devices wireless print again?

    What router?  Reboot the router by pulling its plug momentarily.

    If this does not work, we will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • iPhone on air print work and no ipad

    iPhone on air print work and not the ipad?  any suggestion?

    You mentioned a device works and the other does not. The first thing you want to do is to determine what is different between the two devices. Both are on the same network with success? The other device has already worked, or have been updated recently performed at what caused this?

    To really help I would need details as what model of printer you have, what model of router you have, what version of iOS is installed on your device and what version of each device you have (iphone 4 or 5, ipad, ipad 2, etc.).

  • How do the smaller font for printing on a printer wireless from an ipad with ios v9.2?

    I have a mini Ipad.  I have files in the Notes I want to print on a HP 4635 while a printer using airprint.  When I print the file, the font is too large.  I would like to know how to make the font smaller when I print on the printer.  My ipad is updated with IOS v9.2.

    I think that the notes application will print in the font size regardless of your iPad is on. Before you print, go to settings > General > accessibility > and change under a larger text size. -AJ

  • Can you print wireless from an iPad 2 with a c8180? My ipad2 can't find the printer.?

    I was wondering if anyone has figured how to connect their iphone/ipad to their C8180 to print via the wireless feature, is it possible?

    Thank you

    Hartie1

    It is possible, but not with built-in AirPrint.  You can download a number of applications free printing, HP called iPrint, but their ability to print things in the system is limited (they do not print e-mails, Web pages, etc.).

  • HP 4630 all-in-one: install hp4630... print wireless from iPad... Unable to print from the laptop? All ideas

    Installed new hp4630 printer all in one... can print wireless from my iPad, but I can't print from my laptop?
    Recently upgraded to windows 10. Any ideas? I'm not very computer.

    Hello Tommyboy2,

    Welcome to the HP Forums.

    I see that you experience a problem when you try to print from your computer.

    Have you installed the software/driver for Windows 10?  If this isn't the case, please click on the following link for the e-all-in-one HP Officejet 4630 Printer series full feature software and drivers.

    Please let me know if you see messages or error codes on your computer or printer when you try to print.

    Thanks for your time.

    See you soon,.

  • HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

    I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
    update firmware and drivers about 2 weeks for the 8600 was a
    a long time I have been updated, which is connected wireless has decided to
    Direct to print Wireless Setup once the program installation, I tried to do a windows
    Print the Test Page in the printer property Panel, somewhat normal for
    set up a printer

    Under the connection of the conciergerie, I got the error message 0 x 00000057
    Under wireless direct printing, I got the same error 0 x 00000057

    After spending the time to check the settings, connections and asking
    Why? I decided to see that if I could print the docs, I print a PDF file,
    Notepad and Word documents in each application under the two
    configurations without problem.

    Under the wireless connection, I started the Web Services module
    and was able to make the impression within the Web Services Test page
    module without problem could not yet do the printing Test Page
    in the printer properties panel.

    I ran Print and Scan doctor who, to my surprise mentioned
    a conflict of Driver, I welcomed this program to uninstall the driver,
    went looking upward for the driver and the same driver was so done
    No download but to remove the driver and reinstalled the driver.
    Always error message here.

    I'm now tempted to delete a direct print wireless and see
    What happens if the error disappears, if she does not unstall all
    associated with the printer and do a clean reinstall. In case of emergency
    is there an alternative to the use of the Web Service module to the setting
    When not connected to the wireless network?

    I think that the Panel of the printer would do this (I'll watch this later

    spend enough time on it), or do I need to run Web Services to

    direct wireless installation, just think about this, otherwise I'll shoot

    a usb cable.  Maybe if I install Direct wireless on the printer control panel

    the message will disappear as the installation of the printer program, not software

    on the laptop?

    It is a minor problem since I can still print but question why!

    See other issues about this error message I thought

    spend my experience with this error.

    Always had a number of things to think and try, once again.

    If your getting this error message I would suggest trying a test page printed

    within the module of Web Service to see if the message developed.

    Could not back the driver so I removed the printer driver

    by deleting.

    19/07/2011 Date print driver
    Print driver version 26.0.0.0

    and removed software in Add and Remove software Hp also had to turn

    disable the wireless module directly on the printer to reinstall from the CD.

    Reinstalled printer/software form the CD supplied with the printer, the

    Driver date is 08/12/2009 Ver.9.0.0

    No more error in configuration.

    is the answer to the error message 0 x 00000057 or 0x00000xx

    associated with the driver? Or just the 0 x 00000057?

    Could not find a list of drivers between the driver and

    the driver on the CD.

    Will not update the driver for a good while or until I have too.

    The dates on the drivers are only about two years apart, the

    The version numbers are an issue questable.

  • Help to the implementation of the ipad to print wireless

    I'm trying to set up my printer hp deskjet 3050 to print wireless from my ipad/iphone...help!

    The reason that the issue is important, the Deskjet 3050 does not support Apple Airprint.  The 3050 a supports Airprint.

    This document lists the supported Airprint printers.

    http://support.HP.com/us-en/document/c02814760

  • Change passward C4599 printer wireless

    I changed the modem and the new modem built in WiFi.  That's why I need to re-type the password for the network.  My other printers have a screen and the password can be entered directly into the printer, but the C4599 doesn't have this capability.

    Hi danorman,

    Welcome to the HP Forums!

    I understand that you try to change the password on a HP Photosmart c4599 printer wireless, and I'm happy to help you!

    I would recommend using the USB printer cable, in order to make the configuration process Wireless USB. Please visit this Web site, Wireless Print Center, select Configuration USB wireless for more details.

    Please follow these steps:

    1. Uninstall the software. Uninstalling the printer software.
    2. Re-install the software. All-in-one printer, HP Photosmart C4599 drivers.

    If you need the correct drivers, or instructions to respond please with the name of the operating system that you use. If you do not know the operating system you are using, please visit this site. Whatsmyos.

    I hope to hear from you and have a nice day!

  • Cannot get photosmart 5520 to print wireless from my Macbook pro

    Hi-

    I tried for more than a month to get my computer to print wireless, and I can't make it work.  It will print the test pages, but when I try to print anything else I get the message "Printing - the printer is not responding.  I deleted and reinstalled the software of the printer 5 times.  I restarted the printer again and again.   I downloaded and installed this: http://support.apple.com/kb/DL907 but I still can't make it work.

    I have a MacBook Pro running OS X 10.8 and an Airport Express router.   Please help if you can!

    Well Yes.  I highly recommend you uninstall - you don't really need it.  Use its uninstaller in Applications > Symantec.

  • Canon MP620 "forget" how to print wireless until I have reinstall completely

    I had my Canon MP620 for about five years. I use it to print wireless from my laptop. It worked fine all the time that I got it. Recently, I tried to print from my laptop and I got a message that the printer is offline and cannot connect (Yes, the printer was on). I tried all sorts of things and the only way to print by plugging in the printer to the laptop via USB. I kept trying to print wireless and finally the only thing that worked was completely uninstall the printer drivers, reset the network settings on the printer and the definition of completely back up everything again from scratch.

    Yes, problem solved. However, two days (and a few prints) later, I had the same problem. Would not print print wireless, while it is plugged. And once again, after all sorts of fiddling, the only solution that worked was AM I described the first time. Well, it works again. But a few days later, the same problem! It was this morning. However, this time still connect the printer via the USB port did not work! Once again I have had to reinstall and reconfigure everything from scratch. Now it works again (for now...)

    Then, as the title suggests, I think that my printer is 'forget' printing wireless after a few days of regular use. Any suggestions on fixing this? Or do I just get a new printer? Thank you.

    Hi MattL2,

    Your PIXMA MP620 shouldn't forget its wireless settings.  It is recommended that you contact the direct technical assistance. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

    Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays). A Canon technical support representative will be able to solve this problem more quickly.

Maybe you are looking for