Printing envelopes on the HP 6520

I just wrote, but I do not think that I sent him anywhere... I also have a photosmart printer HP 6520... I can't print envelopes... I tried everything, I know put the envelopes in the tray paper and take the paper.  I use programs of Hallmark cards and likes to fantasies for my cards envelopes... I understand that I must do something with the settings? My envelopes are typically different sizes... for the cards that I print. I can't find the envelope size for the size of the simple maps... I also need to reset the printer for envelopes settings whenever I am doing a map?

Thanks a lot for helping me... I clicked on this thing well done, but I don't think that something has happened. So I thought I would just thank you this way... I'll try it...

Tags: HP Printers

Similar Questions

  • How to print envelopes on the HP OfificeJet Pro 8600,

    Hi people there;

    Recently I came across many people ask how to print envelopes in the printer even the HP Officejet 8600

    Do about it that I decided to provide the two statements in this document as well as the links in the article where I want to talk about the information. That way people who want whether fast and accurate to achieve by reading and following this article and all folk wanting to maybe dig section will provide more in depth information

    This is how load envelopes;


    I'll give you the link of the Article where this information was collected


    http://support.HP.com/us-en/document/c02890475

    Here the steps to load envelopes on the Officejet pro 8600.


    1. Grasp the handle at the front of the tray and then pull the tray toward you to open it.

    2. Figure 12: Pull the feeder

    3. Slide the width guides to the paper as much as possible.

    4. NOTE: If you load a larger size paper, pull out the extension of the tray to extend the status bar.

    5. Figure 13: The input tray Extension

    6. Insert envelopes in the center of the tray with the flap of the envelope on the left and upwards. If the valve is on the short end of the envelope, insert the envelope in the center of the tray with the flap towards the product and upwards.

    7. Figure 14: Envelopes of load

    8. Slide the paper width guides are against the edges of the envelope. Make sure the envelope is centered in the status bar.

    9. Push the tray into the product until it snaps.

    10. Figure 15: Push in the tray

    11. Remove the extension on the output tray the tray.

    12. Figure 16: Take out the tray extension

    It's the explanation on how to load envelopes into the 8600. Hope is useful

    Now check that the use of envelopes are supported by the printer,

    This article will provide you also with the support of the envelopes by this printers;

    http://support.HP.com/us-en/document/c02858465

    Is an important to properly load envelopes for use only envelopes supported by the printer.

    you could spend countless hours trying to figure what the problem is without realizing that the issue is the envelope that you use actually is not supported.


    Here is a list of envelopes supported by the Officejet 8600


    I hope it's to your taste.

    RobertoR

  • Printing envelopes on the Officejet Pro 8600.

    Greetings.

    I'm looking for instructions on printing of envelopes with success on the Officejet Pro 8600.  The printer tries to feed a printer, but stop feeding envelopes because they are pulled in.  Using plain old monarch # 10s.  I realized I have to disable the detection auto-fonction support.  Help.

    Thank you

    Hi BishopB;

    Hope you are doing well and I'm sorry that you are having problems.

    This document shows how to load the envelopes to the printer.

    http://support.HP.com/us-en/document/c02890475

    This article will provide you also with the support of the envelopes by this printers;

    http://support.HP.com/us-en/document/c02858465

    It can be useful;

    RobertoR

  • Photosmart 7510 C - 311 a mismatch of paper for printing envelopes using the Apple AddressBook

    Product name: HP Photosmart C-311 7510 has All In One Printer

    Operating system: Mac OS X Lion 10.7.4 (11E53)

    Error message: paper mismatch when trying to print envelope #10 via apps Apple Address Book, Snail Mail or MS Word

    The system changes: replaced HP Photosmart Premium C - 310 has All In One Printer that printed No. 10 envelopes in a transparent

    Corrections: All HP Support Forum file layout fixes involve Snow Leopard and fixes appear unworkable for Lion.

    Question: Is there a way to replace or circumvent the mid-autumn paper mismatch when there is absolutely no incompatibility?

    How many contacts you want to print in a print job?  Are you sure that the former has a physical address?  You can try another game?

    If this does not work, you could choose X 2 Pages rather than have it print the first page.  I don't know, I'm a little confused on this one.

  • M127: Can I print envelopes from the paper on a m127 charger?

    I wish I could print single envelopes from the document on M127 laser printer feeder. Is this possible or do I unoad the book trying to put in an envelope every time I want to print a?

    Hello

    The document feeder to copy an original, it is not intended for printing.

    To print, you must load the envelope into the feeder down.

    Kind regards

    Shlomi

  • Unable to print print envelope of the master software

    HP C4400 all in used a printer allows me to print the envelope from the print master program. I get the message paper size mismatch, load large paper plain paper and click ok. In my print master program, I created an envelope in the with a creator of the envelope. When he hit the PM program printing and change the selection of paper for envelope #10, he tells me he uses the size of the normal paper and not the letter. With prior printer, I never had this problem. How can I tell the printer more rise the size of letter option and print the envelope?

    Unfortunately, I'm not aware of another way to do if PrintMaster is not a parameter of envelope.  Maybe someone else on the forum with experience PrintMaster will jump in and offer their advice.

  • HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

    I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

    Hey @cmm3,

    Welcome to the Forums of HP Support!

    I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

    Step 1: Load the paper:

    To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

    Step 2: Check the print settings:

    Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

    1. Open Word and click mail merge to top
    2. Select "envelopes" in the upper left side
    3. A page of envelopes and labels should now open. Enter your delivery and return address.
    4. Select 'Options' on the lower right
    5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
    6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
    7. Make sure that you choose the option "Face down".
    8. Also ensure that 'right-hand Rotation' is selected
    9. At the bottom of the window, select the drop-down list of pet food
    10. Make sure that the feeding method is set to main tray rather then select automatically
    11. Press 'OK' and 'Print'.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • Print envelopes

    I have a7520 Al all-in-one Photosmart printer.  It will not print envelopes.  The envelope feeds through properly, but without the address.

    Hello again -1nana,.

    I see when you try to print envelopes envelope prints without address, you print to your HP Photosmart 7520.

    I would like you to take a look here: loading plain paper, Photo paper and envelopes, please make sure that the envelopes are loaded correctly.

    Once the envelopes are loaded, please let me know the following:

    1. what program you are trying to print envelopes since?

    2. you change the print settings?

    3. What size envelope do you use?

    I'll watch for your reply.

    Thank you

  • DeskJet 1015: deskjet 1015 does not print envelopes

    When using Word 2013 and I go to the envelope printing feature, the printer does not print the envelope.  I had no problem before printing envelopes, but the issue has been observed only yesterday, I don't know it's because I've upgraded to Windows 10.

    Pleased to meet you @rawlemars,

    I see that you try us feature envelopes in Microsoft Word, and I may have some information for you.

    You can check your settings by using this support document; Print an envelope.

    Did you that your computer has all its windows updates?  How can I tell if my computer is up to date?

    You can try fix the Office application.

    You could also join Microsoft on the Microsoft community to see if there are any suggestions.

    Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • printing envelopes in officejet 150

    How to print envelopes on the 150 officet mobile printer

    Walter141 wrote:

    How to print envelopes on the 150 officet mobile printer

    Hello

    From the #33 manual page:

    Print on envelopes (Windows)

    1. Load the envelopes in the tray. For more information, see loading page #18.
    2. On the file menu in the software application, click on print.
    3. Select the printer you want to print.
    4. To change the settings, click on the button that opens the Properties dialog box. According to the software application, this button might be called properties, Options, configure the printer, printer or preferences.
    5. On the features tab, change the orientation to landscape.
    6. In the Basic Options box, in the drop-down list size, select more. Then, select the appropriate envelope type.
    7. Click OK and then click on print or OK to begin printing.

    More information: the latest manual from the following link:

    http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=4231413

    You can find the following section of the manual for Apple computers.

    Kind regards.

  • Officejet Pro 8600 Printing envelopes problem

    I have a second tray with envelopes inside. Options for printing MS Word configured to use tray 2 to print envelopes, but does not yet recognize tray 2. If Tray 1 is left in the printer, it prints on a sheet of paper even if it was said to use the tray 2. I have to remove the Tray 1 with paper in it and insert the tray 2 into a slot tray to print on the envelope. Leaving the tray 2 in position of tray 2 and removing Tray 1 is just me out of paper error.

    Hi, you cannot print envelopes of the #2 plateau.

  • Problems printing envelopes on an HP Officejet Pro 8500 Wireless

    I had this printer for over a year and have lived in frustration with how primitive and really dysfunctional, it is trying to print envelopes.  The placement to the right or left of a flap to number 10 envelope gets misaligned, as it is pulled through, for printing and a lot of jams times and tears.  Position Central is the only position that will work, but not without fault as the envelope as bad as she came through.  It often takes two or three tries before I can get an envelope evenly or directly printed.  I'm puzzled as to how HP would engineer a product intended for small businesses with such dysfunctional envelope printing system. Otherwise I am not dissatisfied with the product for almost all other uses.  It has many other features very well this work.  But not print envelope.

    I thought that I would try to inquire as to if an update of the software download may have tried to correct this problem.  Am I alone in this?

    You have moved the paper guides to properly align the envelopes?  I don't see how the envelopes can be loaded in any position, but the Center with the guides snug paper game.  See page 42 (46) in the Manual here.  Also, if you have the latter paper tray note envelopes are not supported in it, you must use the upper plateau.

  • 6520 cannot print envelopes

    I just bought an eprint 6520. I don't have a PC or a Mac, only an iPhone and the iPad. I can print from the ePrint app, but I can not configure the printer to print envelopes. How to set the printer to make the envelopes (or other pages in size, photos) of the printer itself or through my iPad?

    It's actually very easy. I did load the ePrint and remote apps AiO and mating with the 6520. But, none of these applications would not provide paper envelope in option. So, after having unloaded the printer paper and put some envelopes in the bottom tray I just clicked 'print' of the Pages App where I created my list of the envelope. I could only form 6-8 envelopes into the tray at a time, but he did print correctly.

  • 6520 series Photosmart print envelope

    I'm having a problem of printing envelopes varioous #10 programs. I keep getting messages of paper do not match. I am particularly interested in the C5 that are supposed to be looked after very well. I got 1 or 2 outputs in a strange way, so I know it works.

    Hello Bearfan49.

    I understand that you have problems printing of envelopes to your Photosmart 6520. Yes, the C5 envelope format is supported by your printer.

    How many envelopes are in your paper tray? The ability to support is of five envelopes.

    As you change the paper settings for the type of program you are printing from? Can you specify what type of program you print from?

    Please follow this document to resolve: incompatibility of paper.

    Looking forward to hear from you.

    Ashley

  • All-in-one Photosmart HP 6520 printing envelopes

    How to print envelopes?  I have a laptop with Windows 7 wireless.  I understand how to do to load the envelope but don't control where the address is printed.  I need to know where and how to type the address.  I use Open Office that I am not very familiar with, even with the printer.  Shot of a business letter has made the choice of printing the address of the body of the letter automatically?  But if I write an informal letter without an address where should I type?  6520 it prints from the front or the back of the printer? It feels like the printer needs instructions, but I don't know where they should come from.  Please help me.

    Hello

    I normally use Microsoft Word to print envelopes, very simple. You can also use OpenOffice Writer to do the same thing. Please follow the instructions below:

    http://wiki.OpenOffice.org/wiki/documentation/FAQ/writer/printing/How_to_print_an_envelope_with_OpenOffice.org

    Kind regards.

Maybe you are looking for

  • I miss some drivers XP for Qosmio F20

    Hello I try to install drivers but still two not found, I don't know what I chosse to download. In Device Manager, no defined devices are 1 - 2 - "Video controller (VGA Compatible)" and "Multimedia video controller". And also, the blue key on the key

  • PC laptop Pavilion 17: sign in

    Somehow, I clicked on the wrong button and made an update of my computer. I know it wasn't smart. Now, I have to sign whenever I connect. I seem to remember that there is a way that I can put in place and do not have to log in when you connect. Can s

  • STOP: 0x0000008E and system restore

    Hello world My Windows Vista recently blue armored to Midway through the boot process, see the details of technical error following: STOP: 0X0000008E (0C 0000005, 0 X 00000000, 0XB71D5A48, 0X00000000) The error always appears during startup in normal

  • \User id\appdata\local temp\low printer prints no internet

    I get a white page with the words to the fine bottom.otherwise printer

  • replacing a drive RAID 1 failure in PowerEdge T710

    I just got the disk(146GB) of replacement for one of the disks RAID 1 has failed. I would like to know what the best approach is to replace the defective with the new one (same size), now that the spare drive (300 GB) is used by the raid. I want to g