All-in-one Photosmart HP 6520 printing envelopes

Similar Questions

• HP C3100 All - In - One Photosmart: very old printer and drivers

  I know that probably the answer to this already, but here goes anyway. I have an old printer. HP all-in-One Photosmart C3100. He has just shot ten years old. I had some time after 2006, or at the least, it is the date indicated on the manual.  I just got a new computer to replace my computer that was about as old. I climbed up from XP to Windows 7.

  My printer, which works great, needs a driver and HP does not seem to do more. On their website, they say nothing more than ten years. I have no chance or is there anything else I can do?

  Thank you.

  Here is your support page.

  http://support.HP.com/us-en/product/HP-Photosmart-C3100-all-in-one-printer-series/1146511/drivers

  Click here to find your exact model number and check for the drivers and the software Win 7.

• All-in-one Photosmart C310a: problem printing photosmart all-in-one C310a black ink

  Printer all-in-one Photosmart C310 just quit printing black ink cartridge.  I followed all the suggestions on help/support pages, including cleaning the contacts on the cartridge and print head (I do not soak the print head); making sure that nothing has been blocked; Unplug the printer for the moment came and reset; put in a new ink cartridge (the printer when it stopped printing in black, was still full of 1/3 to 1/2, according to the levels shown on the printer).

  It prints than a very altered, unreadable copy.

  I had this same problem about a year ago and find a solution on this web site, but cannot find anything about it now except for cleaning the heads, reset or to install a new cartridge.

  I tried to access this particular response from my old e-mail, but it is not related to whatever it is that has tackled the problem last year.  I desperately need this printer going again, please help.

  Thanks for CAhpUSER respondent

  I didn't really picture for help, but I will do my best to clarify what I can! This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer is some visuals that will make things clear with my explanation below!

  The part you are diving into the water is the ink nozzles. When the instructions say do not touch the ink nozzles, that means with the fingers/hands. It says to make sure that you use a fluffy towel/no paper to wipe the print head, so don't put fats from your contact with her skin. The electrical contacts are the part of the print faces head that looks like the back of the printer, just in some places grouped copper.

  I hope this helps clear things upwards a bit for you

• C5580 all-in-One Photosmart Pr: c5580 print usually

  I have a Photosmart C5580 all-in-One printer stopped printing from my laptop for about a month before, i.e. December 2014.  An error flashed, but it disappeared before I could read it.  It will print

  When you copy something and it will show a diagnostic page that makes no sense for us.  We bought a new

  cord for it but that made no difference. The computer is a HP Pavilion dv7 laptop. AMD

  Turion (TM) X 2 Dual - Core Mobile RM-70 until it works very well.  Thanks for any help you can give

  Hello @SunnyCat11 and welcome to the Forums of HP!

  I see that you are having problems printing.  I would like to help!

  I recommend you to perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also run the following updates:

  Utility software update from HP

  Critical update

  Critical update to correct a PC Printer Communication issue

  Critical update for HP

  In addition, these pages are print after the document you copied, or instead of?

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Photosmart HP 6520 all-in-one: Photosmart HP 6520 Scan to computer function doesn't work is not after the driver download

  After that our latest operating system updated, our HP Photosmart 6520 had scanning problems.  Usually a reboot or as part of the scan on the HP computer would work.  Today, I downloaded the latest driver in the hope that could solve the problem.  Now the scanner is not recognize the computer, and I can't enable analysis of the it function with HP on my Mac utility.  The print feature works very well.   This message I see in the HP utility:

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I searched HP website, but I can't find anything other than the driver I downloaded for Mac OS X 10.10.

  What can I do to get my scanner up and running again?  Thank you very much for your help!

  Hi @kjnowicki

  I want to help you with your scanning device.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Black all-in-One Photosmart C6280 ink prints very bad

  Black ink stopped printing 2 days ago started printing anything. I tried everything that I could see to do - cleaning heads manually, then cleaning using the tools of the printer, alignment, self-diagnosis and given to zero. Now it prints, but black is ridged and light of color, very poor quality. What now?

  The troubleshooting steps described in this document can help solve the problem.

• How or where to get them or buy the original CD for printer all-in-one Photosmart C7280

  My installation CD original for printer all-in-one Photosmart C7280 lost in the transition. Unfortunately now I have to reinstall the software, but the installation file downloaded refuses to install advanced features by asking to insert the original CD.

  Now where can you get such a CD.

  Thanks in advance.

  Shlomo [personal information]

  You can download or order a copy at this link.

• Printer all-in-one Photosmart D110: think there paper jams

  Printer all-in-one Photosmart D110: think there most of the time paper jams (the computer print or copy).  This happened for some time.  Sometimes it will print and then at other times, it will produce jam messages when there is not a jam.  I tried all the solutions of HP.

  There is a document to help walk a (real or fake) paper jam errors troubleshooting in the photosmart D110. This document can be found here.

  So I'll send more information via the Inbox of (private) messages.

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• All-in-one Officejet 8600: margin cut envelopes #10

  I've had the problem before: the left margin cut off the address on the envelopes #10 in MS Word.  Someone helped me to solve the problem, it was a solution involved, but worked like a charm, until my computer crashed.  The notice indicated that it was a problem of softward.  I can't seem to find this thread, so I thought I would try again.  I've seen other "solutions", but they are crazy workaround and may cause other problems.

  Anyone know if this problem has been successfully resolved?  How?

  Hi @Schnelldaniels,

  I understand your left margin is the cup of the text and you had this problem in the past. I can find the thread you were talking: Re: Photosmart HP 6520 recognize envelopes in Word for Mac.

  If this isn't the one, perhaps, you will find the thread if you check your profile, that's how I found this one: Schnelldaniels messages.

  Of course, if you are unable to find the solution you are looking for, or if you do and it does not work this time, let me know and I'll help you with your settings.

• Alles all-in-one Photosmart C7288: Canoe more scan on my alles all-in-one Photosmart C7288

  When I swichted above 7 window tot 10 window, I lost my ability to scan from my printer. While a 7200 inctjet

  the stil printer prints documents but I can't scan my documents more.

  I used the updated software for my printer. In the installation, the system asked for a cd

  This one, I have more someone can send me a cd or someone has another solution.

  Thank you

  Hey @SNAJ,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of the all-in-one Photosmart C7288 printer after upgrade to Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, uninstall all software associated with the printer to your PC. Finally, download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you are able to scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you

• All-in-one Photosmart 309g. I can't print envelopes.

  I have a Photosmart 309 g all-in-one printer. It will not be printed envelpoes. I have the good envelope picked in Word. I get a "Paper mismatch" error  I'm using Word 2007 on Windows 7 Home. Can someone help me?

  Thank you.

  Here is a link to a document that incompatibility of paper addresses for your printer model. Once you click on it a nice open link this page, a drop-down list labeled "print envelopes in Microsoft Word 2007. This will give you trouble shooting to try to try to correct the problem you are having with the printer. I hope this helps.

• HP PHOTOSMART 6520e-all-in-one: Photosmart 6520 stopped printing.

  Printer was working fine, after that I updated the driver for Windows 10, then just stopped printing, error communicate is not with the printer, but the status of the printers is connectivity is ready, State of the network again on the computer it says ready until I hit print I get error. Print the printer status reporrt of the printer, but no computer or computers of the tour.

  Hi @hpvee

  Welcome to the Forums of HP's Support. I understand that you are experiencing what looks like network problems. I would like to help.

  First of all, try to launch the HP print and Scan Doctor. If the problem persists, try to go through the network troubleshooting steps in this document. Printers HP - printer keeps Wi-Fi connection.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!