printing from laptop wireless

Similar Questions

• Cannot print from desktop computer, page test continually prints up to no more than paper in the printer. Printer will print from laptop (wireless).

  The office recently repaired under warranty. (Windows 7). Cannot send anything to print successfully. Uninstalled the printer.  Installed using disc. Followed the instructions to print a test page. This printed and kept. Printer disconnected. Tried to print a coupon. Impression went immediately to the non-stop test page printing. How can I stop the test page (button stop/clear on ineffective printer) printer works with my laptop (wireless).

  Hello

  Were there any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  See the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• I would like to print from laptop to the printer at home. Printer is connected to the NetGear router ethernet

  HP PAvilion dv1000, Windows XP

  I would like to print from laptop to the printer at home.  The printer is connected to the NetGear router ethernet.

  I was able to print wireless from laptop to HP Officejet 7310 all-in-one, but now all I get is document to print message' failure '. "  I can get documents to print on the printer using my smart phone, but not the laptop.

  I used the "find printer" button on the print screen and can see the printer to select.

  Any suggestions?

  Figured it out after watching a few other posts...

  Configured the printer port IP address and now it is printing perfectly.

  Thank you to have messages out there for review.

  

• Printer, I cannot print from my wireless laptop even if the laptop says that it recognizes.

  I have a HP printer. It is said that it recognizes my Dell laptop and when I troubleshoot it everything comes back fine, but when I try to print from it nothing happens.

  Hi RichardSteger,

  See the following article for troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  I hope this helps!

• Wireless printer will not print from laptop

  Until yesterday, I was able to print from the desktop and laptop.  My printer is a HPC310 all-in-one.  I can print

  of the desktop but not the laptop.  Laptop is Windows 7 professional 64-bit.  When I click on the printer on my

  laptop it shows 5 items waiting to be printed.  I did no changes and everything worked until yesterday.  Today I

  Finally I e-mailed a document from my laptop - opened the e-mail on the desktop and it print.

  jwallis88,

  Welcome to the HP Forum.

  Your print spooler service can be hung on the laptop.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  The approach direct to get rid of the blocked files:

  1. Open Windows Explorer (called File Explorer in Windows 8.x)
  2. Navigate to the folder: C:\Windows\System32\spool\PRINTERS. *
  3. Delete the files that you find in the PRINTERS folder

  * When you try to click in the PRINTERS folder, you may get a warning about authorization, browse and / or enter the password for the administrator level to be able to access the folder

  Next...

  One method to restart the spooler service:

  Control Panel > display icon > Administrative Tools > Services >

  Click on "name" to sort this column >

  Scroll down and look for print spooler > Select Print Spooler >

  Click on Restart service

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• Direct print from laptop computer connection

  I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!

  You have a wireless router?  I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.

  If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.

  That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.

  On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed.  For me, it comes to 192.168.1.13.  Enter the appropriate value, Next, Finish.

  If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop.  It would probably be a much better solution than to try to make a converter USB - lan.

• I can't print from laptop and I have no disc

  Yesterday, I changed the Internet companies. I have reset the settings on my series of d110 eprint all-in-one wireless. The test report is perfect, running. I can print from the web apps on the screen of the printer and even from my iPhone, but whenever I try to print from my laptop it says printer offline and it will not print. I don't have the disk to restart the program. I don't know what I can do and it's VERY frustrating because I can't print anything! Help, please?

  I solved the problem with the help of a wonderful gal named Summer S. with online support chat

• Printer hangs when you attempt to print from laptop

  We have a Dell with Windows XP desktop computer and a laptop HP with Windows Vista.  The Dell all-in-One printer is 942.  We have installed a Linksys Wireless - N Gigabit Router.  We can print from your desktop, but when trying to print from the laptop, the printer hangs.  Please uninstall and reinstall the printer to make it work again.  We went through all the steps Microsoft said about sharing a printer and adding drivers, but nothing works.

  Hello
   
  1. do you have any security software installed on the laptop?
   
  As you are able to print from your desktop without any problem, there must be some incorrect parameters or interruption of other programs on the laptop.

  To reset the print settings, run the printer Troubleshooter by visiting this site and check the result.
  http://support.Microsoft.com/GP/printing_problems
   
  If the problem persists, try the steps in this article to find what is causing this problem: http://support.microsoft.com/kb/929135
   
  NOTE: Be sure to follow step 7 to reset the computer to start as usual.
   
  Let us know the result of troubleshooting steps above, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Can I print from a wireless and wired connection at the same time?

  I have a wireless printer HP Photosmart Plus B209a-m running from my laptop (Windows 7 OS).

  I have an old computer which is not wireless which contains files and programs I want to print from. Continuing to use wireless for my laptop, can all I connect the printer wire (provided) to the old computer and use the printer at the same time at the same time?

  USB and wireless can work at the same time. However, if your computer is connected to your wireless router, even by the router, it can connect to a wireless printer.

• HP Deskjet 2542: Printing from laptop

  The printer works perfectly when printing from a phone or a tablet.

  It will print well from my laptop too long if I print using HP ePrint.

  The problem occurs when I print from the laptop but choose my default printer which is the HP 2542.

  Colors on the printout are not correct.

  All other devices, the color printing is OK. (And when you print the laptop using HP ePrint)

  Hi koolwilf ,

  With ePrint it uses their own driver, not the one installed on the computer.

  You can try to install the driver Windows classic to see if you have the same results.

  In devices and printers, run the Add Printer Wizard and select the classic HP driver from the list.

  Please let me know the results.

  Thank you.

• Cannot print from a wireless printer

  I installed hp photosmart 6510 wireless successfully, but I can't print from my computer... Troubleshooting, deletes the file from the stone and no indication no more errors and try to print again... the printer itself is operational and print directly from the internet, although... Can you? Help

  OT: I installed the wireless printer but cannot print from printing a stone... Troubleshooting removes the file and said: problem solved, but I still can't print. Can you help me

  Hello

  You did changes to the computer before the show?

  I suggest you try all the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• I can't print from my wireless Mac

  I have to use the cord to print from my Mac.  But surprisingly, others in my house can print to the HP Office Jet Pro 8600.  What gives?

  Hi Boband welcome to the Forums of HP!

  I see that you are experiencing printing problems.  I would like to help.

  I'm including a document to help determine which version of Mac OS you are using:

  Mac OS X: how to find which Mac OS X Version is on my computer?

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend you to reinstall HP Officejet Pro 8600 e-all-in-one printer - drivers N911a.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP envy 4504: unable to print from laptop

  Hello

  whenever I try to print a document in microsoft word 2013, that never works.

  It shows that it is printing but it ends almost instantly and does not activate my printer.

  whenever I try to print on my mobile phone it still works it's just with my computer.

  hope you can help.

  Hi printerboy666,

  Welcome to the HP Forums.

  I see that you are experiencing some printing problems when you attempt to print from microsoft word 2013.

  I have some suggestions that we can try.

  First, check the Microsoft web page for updates that may be available for the Word program.

  Disable firewall or anti virus protection before printing.

  Run the print HP and Scan Doctor just in case a problem is with the HP software.

  Let me know how make you out.

  Thanks for your time.

  See you soon,.

• Cannot print from a wireless network printer

  the print queue says 'printing' However the status monitor says "print data creation" and nothing happens

  Hi Richard,

  I appreciate the efforts that you have to try to solve the problem. Please write us with the following details.

  1. Are you able to print from other computers on the same network?
  2. What is the brand and model of the printer?

  You might face this problem because of the data of spooling print. You can follow the steps below and check if it works. But before that make sure you access the print administrator servers.

  1. Press the Windows key + X key , and click on Control Panel.
  2. Some Printers and click Add printer.
  3. Select run in as long as administrator.

   

  Navigate to the location given below.

  C:\Windows\System32\spool\PRINTERS

  Here, C is the drive on which you installed the operating system. All spend in a new BACKUP folder called. Restart your computer.

  You can see the question, if you still experience the problem, you can follow the steps in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-CA/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also check out the links below.

  What happens if a wired device is not installed correctly?

  http://Windows.Microsoft.com/en-CA/Windows-8/what-device-isn ' t-installed-correctly

  Let us know the status of the issue, we will help you.

• can not print from laptop - lower thread.

  not able to use HP C62880 to my laptop. (wireless)  Windows 7 Home premium on HP laptop "operating system is not supported".  How he "supported"?

  Download the driver Windows 7 recommended HP here.