Wireless printer will not print from laptop

Similar Questions

• I would like to print from laptop to the printer at home. Printer is connected to the NetGear router ethernet

  HP PAvilion dv1000, Windows XP

  I would like to print from laptop to the printer at home.  The printer is connected to the NetGear router ethernet.

  I was able to print wireless from laptop to HP Officejet 7310 all-in-one, but now all I get is document to print message' failure '. "  I can get documents to print on the printer using my smart phone, but not the laptop.

  I used the "find printer" button on the print screen and can see the printer to select.

  Any suggestions?

  Figured it out after watching a few other posts...

  Configured the printer port IP address and now it is printing perfectly.

  Thank you to have messages out there for review.

  

• Satellite L300-1AS - error PXE - boot error - will not boot from USB

  Startup error - error PXE-L300 1AS - will not boot from USB

  I recently bought a new HD to replace the original that my laptop takes an hour to load.

  I put the new drive hard at in the BIOS setting, I chose to boot from USB... USB is recognized as it appears on the screen of the BIOS. I disabled the LAN option as it gives me PXE error... I think that the USB files are not read. as I handed the old HD and attached to boot from USB but it just goes to the start screen.

  I thought that perhaps I bought the wrong HD, but a new appeared on the BIOS setting... I'm a bit confused and would appreciate it if someone could point me in the right direction...

  Any help or advice will be appreciated.

  Thanks in advance.
  Abul

  New HARD drive has nothing to do with it. Problem must be your USB key.
  In your ad you didn t wrote what is on it, and we don t know if USB can operate as boot device or not.

  I put t know what OS you want to install right now but original recovery DVDs or use Microsoft installation disc and install Win7 32 bit. I ve installed on friends L300 and it works perfectly.

• Apple wireless keyboard will not connect to mac mini

  Apple aluminum wireless keyboard will not connect to mac mini. He worked the other day and when you press the power button gives me a green light for a few seconds. I removed from my bluetooth devices and removed the batteries which did nothing. It will not go into the mode of discovery, but he recognizes the keyboard and fails to connect.

  So much for some reason any it plugged into my macbook of brothers.

• MY iphone6 will not return from the icloud, HELP?

  I had to replace my phone.  The new phone will not render from the icloud.  I tried several times and I even took it in the Apple store without success.

  Weezy616 wrote:

  I had to replace my phone.  The new phone will not render from the icloud.  I tried several times and I even took it in the Apple store without success.

  Thanks a lot for sharing that you cannot restore icloud.

  Maybe include some details as to what happens when your restore IE. error message?

  Or that said Apple store has been without success...

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• HP TouchSmart Ultrabook 4 ENVY: fried, drive will NOT boot from usb

  Hard drive clicking on, definitely fried. Replaced by the new hard drive. No matter what I do, it will not start from the

  bootable USB key with windows 8 install on it.  Stick to boots on other computers.

  I press ESC to the maximum power that I can get the boot menu, F1 works great, F2 works very well.  If I select F9 for boot options, for bios F10 or F11 to restore it goes back to the found boot device, hard drive (3F0) asks me to press F2 for the diagnosis of sys, the screen flashes. will not change.  No matter what I try, I'm stuck in this endless loop.

  How can I put an operating system on this device?

  Model # c2k82ua #abl

  Nothing I've tried has worked. However, I have finally managed to make it work has that.  I disconnected the battery for the bios for a bit. After that, I could get in the bios setup. Still would not start from a good bootable USB then I activated the Legacy and set the boot order to boot from an external USB Cdrom. Reinstalled windows 8 and all is good now thanks for all the comments!

  Dave

• Microsoft wireless keyboard will not type the letter 'c' or type the number "3".

  My wireless keyboard will not let me type the let type me the letter 'c' or type the number "3". This works sometimes! Help please!

  This is a Microsoft wireless keyboard 3000 v2.0. It came with a mouse aswell which is working as expected.

  Any ideas? It's so frustrating!

  If you can, try the keyboard on another PC and try a different keyboard on your PC. If the keyboard has the same thing on another PC and another keyboard works well on your PC, it is "side on" hardware failure. Assuming that it is hardware failure, if it is under warranty GET it replaced, it is not you will have to buy a new one.

  Please mark this as useful or response if applicable.

  Tricky

• Problems printing from laptop to wireless network

  I've had problems for months now print wirelessly from my laptop to my printer. I use a HP OfficeJet 6700 Premium, and my laptop is a Lenovo. When I click on print a document, I get a warning on my laptop that the driver for the printer is offline. I tried to restart my laptop, disconnect and reconnect to the internet, restarting printer, disconnect and reconnect it to the internet, uninstalling and reinstalling the printer (using the existing driver and replace). Sometimes one of these 'corrections' works, other times not. Tonight I tried to restart the two, reconnect the two and then uninstalled and am trying to reinstall it but my laptop cannot find the printer to install it.

  I am at a total loss. I work from home, sometimes and I bought a wireless printer for the convenience that he cannot stand on my desk next to my laptop to connect to the computer. (Also don't know what happened to the cord for the printer on the laptop, presumingI got with the printer.)

  Both devices say they are connected to the internet. I can test my laptop and the internet connection works fine, don't know how to test the connection of the printer, but it says connected and has an IP etc.

  I also tried disconnecting everything but the computer laptop and wireless network printer, and it won't always connect to print.

  Can anyone offer any fixes? This becomes incredibly frustrating when I sit down to work and fight with the printer for hours.

  Thanks in advance.

  Hello KitchenTalesand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have connectivity problems.  I would like to help.

  I recommend you to perform a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Once the reset is complete, I recommend you to unplug your router for 60 seconds, and reconnect power.

  After the restart appropriate time, I would recommend using this document on troubleshooting wireless printing Center.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Want 5530, wireless, printing from a laptop Mac and Windows 7

  Hello

  I've just set up my new Envy 5530 wireless printer on my iMac (running Mac OS 10.9), I can print comes it very well, even from my iPhone / iPad. I also posted an e-mail to her address and that works very well, too.

  However, I also have a laptop HP ProBook 6455 b and I'd like to be able to print wirelessly, of him also. But this does not work, I'm unable to install the printer using the "Devices and printers" Wizard on Windows 7.

  I went to:

  Control Panel > hardware and sound > devices and printers > add a printer > add a network, wireless or Bluetooth printer. This printer is not found, even when it is on and the rest of my devices can see and print on it.

  Do I need to download and install the drivers for Windows 7 from hp.com? Or is there something that I am not making the invisible to my Windows 7 computer printer?

  Thanks in advance for your help,

  David G.

  Hi David G.,.

  I understand that you can not get the printer connected to your Windows laptop. You are on the right track, you need to download HP ENVY 5530 e-all-in-one of the printer drivers. Select your operating system, and then click the button "next". Scroll down and click on "Driver - Product Installation software. Click Printer series e-all-in-one HP Envy 5530 full feature software and driver. This should bring up the download page, click on the 'Download' button and I suggest saving it to your desktop and run the installation from there.

  I hope this helps, let me know.

  Thank you

• HP Officejet 6500 E709n wireless. Will not print Word documents or text edit.

  I'm connected wireless with an iMac Snow Leopard and MacAir 10.8.2, Mountain Lion 10.6.8.  I have used this system for a year, had no problems printing to date.  I am able to print a .jpg attachment but nothing else, we try to print (from computers) is printed.  I tried to print a Word document as well from a text edit page with no luck.  Two days ago, I was able to print from a Word document - nothing has been changed on the computer or the printer.  I am naïve.

  How is the printer connected?  Would it be a network, what router?  You've restarted the router by pulling its plug momentarily?  You've restarted the printer?

• Direct print from laptop computer connection

  I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!

  You have a wireless router?  I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.

  If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.

  That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.

  On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed.  For me, it comes to 192.168.1.13.  Enter the appropriate value, Next, Finish.

  If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop.  It would probably be a much better solution than to try to make a converter USB - lan.

• I can't print from laptop and I have no disc

  Yesterday, I changed the Internet companies. I have reset the settings on my series of d110 eprint all-in-one wireless. The test report is perfect, running. I can print from the web apps on the screen of the printer and even from my iPhone, but whenever I try to print from my laptop it says printer offline and it will not print. I don't have the disk to restart the program. I don't know what I can do and it's VERY frustrating because I can't print anything! Help, please?

  I solved the problem with the help of a wonderful gal named Summer S. with online support chat

• Printer hangs when you attempt to print from laptop

  We have a Dell with Windows XP desktop computer and a laptop HP with Windows Vista.  The Dell all-in-One printer is 942.  We have installed a Linksys Wireless - N Gigabit Router.  We can print from your desktop, but when trying to print from the laptop, the printer hangs.  Please uninstall and reinstall the printer to make it work again.  We went through all the steps Microsoft said about sharing a printer and adding drivers, but nothing works.

  Hello
   
  1. do you have any security software installed on the laptop?
   
  As you are able to print from your desktop without any problem, there must be some incorrect parameters or interruption of other programs on the laptop.

  To reset the print settings, run the printer Troubleshooter by visiting this site and check the result.
  http://support.Microsoft.com/GP/printing_problems
   
  If the problem persists, try the steps in this article to find what is causing this problem: http://support.microsoft.com/kb/929135
   
  NOTE: Be sure to follow step 7 to reset the computer to start as usual.
   
  Let us know the result of troubleshooting steps above, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• HP Deskjet 2542: Printing from laptop

  The printer works perfectly when printing from a phone or a tablet.

  It will print well from my laptop too long if I print using HP ePrint.

  The problem occurs when I print from the laptop but choose my default printer which is the HP 2542.

  Colors on the printout are not correct.

  All other devices, the color printing is OK. (And when you print the laptop using HP ePrint)

  Hi koolwilf ,

  With ePrint it uses their own driver, not the one installed on the computer.

  You can try to install the driver Windows classic to see if you have the same results.

  In devices and printers, run the Add Printer Wizard and select the classic HP driver from the list.

  Please let me know the results.

  Thank you.