Printing in Lightroom 5 problems

Similar Questions

• Cannot print in Lightroom

  I have a 6500 canon printer installed on my mac.  It is fully recognized and I can print of all programs, including Adobe Photoshop CC.  However, I can't print from Lightroom CC. It is completely grayed out.  I can print to file, but cannot print directly to the printer.  Print settings are all fine and show the printer as being online.  I uninstalled and reinstalled the printer, restart the mac, turned off and unplugged/replugged the cable to the printer without result.  Any help would be great appreciatedP

  How is it gray? Do you mean the button "print"? Who gets grayed if you have selected right JPEG file under the print job in the Panel on the right. Make sure that who is set to "printer". You should be able to print on any printer that you have installed in the operating system. To get the best color, you may have to play with the settings and profiles, but avoid any problem printing to any printer that the OS can see.

• The printer options not available when printing from Lightroom

  Hi all

  I have a problem with the interface of Lightroom 2 (version 2.4, executed in 64-bit mode on my Intel Apple Mac with Mac OS X 10.5.8 (Leopard)) to my printer driver, an Epson Stylus Photo R800.  I can see looking through the forum that there has been a lot of problems with printers, but none as far as I can see that seem to cover my particular problem.

  In the Lightroom print module, after setting everything up, selecting the correct ICC profile for the printer/paper etc. I click on the button "print...". "at the bottom of the right panel to launch the dialogue of the printer.  My problem is that the essential options, I need access to this printer dialogue, namely 'Print setting' (to determine the media type, and print quality) and "Color management", (to disable the printer color management)-are disabled.  To be exact, these options have a line through them, as if they were crossed.  "Print option" and "Setting the Extension" are similarly disabled, while "Layout", "Paper handling", "Cover Page" and Planner "are available.  (See JPEG screenshot attached.)

  If I try to select one of the options not available such as 'Color management' I see the following on the screen error message:

  "The bundle 'Color management' couldn't be responsible because it does not contain a version for the current architecture.  Contact the creator of all here for the most recent version: Color Management 3.09, SEIKO EPSON CORPORATION 2001-Copyright (C) 2005. All rights reserved. »

  The strange thing is, if I print from Photoshop CS3, there is not this problem: "Print setting" and "Color management" are not disabled, and I can make the adjustments I want.

  Coming off the printer prints color are way off if I print from Lightroom, so that from Photoshop, they are great - I guess because of this problem (I can not turn off printer in Lightroom color management, so that I can in Photoshop).

  I guess that this is a problem in the interface between Lightroom 2 and my printer driver, but I find it strange that I don't have the same problem in Photoshop.

  I have re-installed the latest printer driver downloaded from the website of Epson many times, following the instructions to the letter to Epson to remove the old drivers of my machine, to nothing does not.

  I really want to print from Lightroom instead of Photoshop, I like the simplicity of the Lightroom print module.  Can anyone throw any light on this?  Any help or ideas gratefully received!

  Thank you

  Ian

  Just save a driver of printer/preset in any 32-bit application. Then apply this preset when you print from LR runs as a 64-bit application. It is only the interface that is the problem. It should show very well, at least it does with Canon printers.

• HP 6600 printer: I have a problem with printer Hp 6600

  Even if I do not print colors, my motto keep depleting the color cartridges and will not work until all color cartridges are installed. What can I do if I want to use only the black cartridge?, it was so boring.

  Hi @Stork11,

  Welcome to the HP Forums!

  I understand your frustration. However, this printer uses same color inks when printing in black only. If run out you of color and kept black printing only, you provoquerez problems with the print head. FYI, here's the guide to your printer , see page 74. I also linked page to provide information HERE.

  Hope this information is useful and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• The print spooler has a problem and closes its doors.

  The print spooler has a problem and closes its doors. This often happens when I'm trying to print something with multiple copies. Any program that I use either Wordperfect or editor he has a problem. It helps that I could restart the computer and it clear, but not even this works now.

  Try to uninstall and reinstall the printers.  Update the drivers for the printers you use.  Try to have both installed printer and see if you can isolate / how printer driver may be involved in the issue.

  Another option to consider is to...

  (Post by marc_lebowski)

  Clear printer spooler files and restart the Spooler Service

  =================================

  1. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.

  2. double-click on "Printer Spooler" in the Services list.

  3. click on stop, and then click OK.

  4. click on start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.

  5. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.

  6 double click on "Printer Spooler" in the Services list.

  7. click on start. In the Startup Type list, make sure that "Automatic" is selected and click OK.

  See if the problem persists.

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• Lightroom import problems

  Hi guys!

  Been having bad last week, or so, with importing photos into Lightroom. I have a LOT of pictures, about 10.5 thousand, and try to import in Lightroom are problems of variables. The two big questions are this:

  1. I store all my photos into folders to organize them. When downloading, all records imported photos are not just duplicated, but the photos in the files are duplicated twice. Any ideas there?

  2. I name all my files that I save the photos in order to keep track of them. When a file starts uploading in Lightroom, it removes the name of the folder, which is a huge problem.

  Another minor point, sometimes import gets stuck, but I tell myself it's just because of the amount of pictures that I'm importing, restarting fixes everything.

  Any help would be greatly appreciated!

  1. you probably import using the copy option while you should use the option Add

  2. you, the user, have complete control over the name of the records used

  Please see Lightroom 5: import your Images - YouTube

• Printing in Lightroom

  Hello

  I find printing in Lightroom is a bit of a nuisance because I have no control over the scaling factor. It shows the @ppi I print, but compared to for example Photoshop 2015 cc "Print tool" by rip Roy Harrington photography or Mirage, it really lacks professionalism, and I really see no reason why? Printing in Lightroom or Photoshop should be at least the same... Am I missing something?

  Anyway,.

  Alex

  Hi LeAlexandre,

  Please go through the below article in brief information about printing from Lightroom.

  Reference: print photos | Adobe Photoshop Lightroom CC tutorials

  Kind regards

  Mohit

• How to print in lightroom 6

  How to print in lightroom 6

  The following tutorial was created for Lightroom 5. However, the principles are the same:

  Lightroom 5 - print the perfect Image. To get started with Adobe Photoshop Lightroom 5 | Adobe TV

• I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing

  I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing

  Suggest you to reset preferences in Lightroom and then, check out: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

• When I try to print from Lightroom, the program crashes completely.  How can I fix it.  I tried to reinstall the program, but it did not help.

  I can't print from lightroom 5 on my iMac now.  I can always print from lightroom 5 on my MacBook, and other programs seem to print as expected.  I removed 5 Lightroom and reinstalled a couple of times and it will not print.  Can someone help me?

  Please make sure you read and write on the disk permissions.

• Printing from Lightroom settings - Paper Type

  I have a printer Canon Pro-10. We know that in the printer settings if you set the Type of media to a fine arts paper then the driver applies a margin of 30mm printing. So if you try to print from Lightroom, but have margins of 10 mm, it refuses to print until you change something.

  Now I can get around this by setting the media type on a photo paper so I could print the edge on a paper fine art.

  My question is;

  I can set the paper size in the Page Setup dialog box, I color managed by Lightroom and I actually use the right ICC profile for the paper and printing, this media Type setting does nothing with regard to printing? I printed some impressions on canvas and I see no difference in print quality?

  It seems that the only difference in the Fine Art media Type parameter is the border forced 30 mm margin. Apparently, there is a potential to curl around the edges if you print without margins on paper Fine art. As long as you use a media Type for a type of similar paper it should work fine as you have experienced it. Just make sure you use the right paper Fine Art LR catalog profile > Print Job > color management.

  Pro - 10 print borderless on fine art papers? -Canon community

• Printing from Lightroom 5.2 on Canon Pixma Pro-1

  Hello

  I am new to Lightroom 5 and Canon Pro-1. I'm not sure that I fully understand what is happening when I use ICC profiles for printing (in spite of paying through forum after forum). When I print the results look, nothing like the results on the screen. I tried the soft test and proof image looks like my output, but I'm not understand how I'm supposed to use the ICC profile.

  System

  Windows 7

  5.2 Lightroom

  Canon Pixma Pro-1

  8 GB RAM

  1. use of proofing it appears that I need to adjust my image for each paper type. It is not meant for me - I thought that the profile would be to adjust printing so that I wouldn't have to adjust the image.

  2. when I print, I put the following settings of the printer:

  

  3. when using unsupported paper, what types of paper should I choose? Is there a resource anywhere that tells me?

  

  4. should I have my correct print settings Lightroom base?

  

  Is could someone please tell me what I understood/hard to please? I know it's a forum for beginners but still, please, excuse for the total lack of understanding.

  Help is greatly appreciated.

  Thank you

  Mike

  I use the Pro-100 for a few months.  It's a great printer that I am very satisfied.  Currently there is a very aggressive rebate program if someone wants a new printer.  FWIW, I have been unable to find anyone, anywhere not happy with Canon Pro printers.  Basically, you can get a value of $170 of paper and ink for $99 with a printer that is 'free' to the end of the year.

  Return to this topic!

  There are potentially three completely different workflows between Lightroom and Canon Pro-life 1, 10, 100 series that involve choices of papers, ICC profiles and color management.

  1. printing with Lightroom controlling color.  You must open the printer driver and disable the printer color management.  By selecting the document in the pilot seems to define the profile.

  2. print with the printer manage the colors.  In LR, he must choose color management > managed by the printer.  Then turn on color management in the printer via the driver.

  3. printing with Canon provided in Cap.  After you have installed the plug of the supplied disc, in LR, go to file > Options of the plug-in > Canon Print Studio Pro.

  Like Lightroom fan, addict and supporter of everything that said J Kost, I was using #1 and love for landscapes.  I had to work a bit to find a way to turn off the printer as well as examples of J Kost for Epson.  Then I tried to print a picture of my granddaughter and her cheeks kept getting a little purple.  When I checked the Preview button before printing in the printer driver, I could see the change in color of the preview of LR.

  I went to #2 where the printer takes the decisions.  Extracts matched and stopped the cheeks blush.

  Then, I looked at a video conference conducted by a specialist of Canon products on the Web B & H Photo site in an hour.  It's the Canon plug-in demo.  I am strongly considering using that in the future.  I hope that Kost J will not be upset with me!  It seems that the Canon plug-in really has better control of quality on the printing process.

  A particularly interesting feature of the plug-in is a test sheet that looks like a sheet of evidence.  There are a bunch of thumbnails printed on a single sheet with a different color casts and numbers of adjustment under them.  Once you choose one that is 'just', you can save the setting as a "Preset" for that paper.

  Note that in the long video, Canon representative insisted on the support of 3 papers of party in the plug-in.

  Too long video was worth the investment of time.  I understand my printer and more watching him.  The link: http://www.bhphotovideo.com/indepth/photography/tips-solutions/canon-pixma-professional-in kjet-printers-exactly-you-considered

  Bill

• Printing with Lightroom 5.7 problem - cannot print - Source file missing

  With the help of 5.7 LR and I am trying to print but get the message: "there is a photo in the print job that is missing its source file, it will not be printed".  When I say keep feeds paper through and nothing prints.  How to fix this?

  Hi DavidsFITS,

  It is said that the source file is missing, which means that the original location of this file in Lightroom is missing.

  If you know where the file is stored at the origin, then you must first move the file to the Lightroom library module and then print it.

  See this article for steps to move: How to find missing photos in Photoshop Lightroom

  Kind regards

  Claes