Printing of barcode using LabVIEW in Zebra GT800

Similar Questions

• Screenshot of Tektronix MSO4104B using LabVIEW

  I am trying to acquire a screenshot of an oscilloscope Tektronix MSO4104B using LabVIEW. I am currently able to collect data from the device and have a waveform displayed on my front of VI. However, for various reasons, our preference is to capture the actual screen shot of the scope.

  I have reviewed the reference for programmers for this camera and have done countless searches on Google for an answer, but have not been able to find a solution. It seems that a few people were able to reach on OTHER Tek scopes by sending a hard copy through the port of communication (GPIB, USB, Ethernet, etc.), but according to the reference of programmers for this particular device, it seems that he will send a paper copy of an installed printer, rather than simply as a stream of data to the port which can be read using VISA controls.

  The other solution I've seen is to record the screen turned to a flash drive, and then copy the file via the port to the PC. However, none of these solutions seems to be available on this device... it's one of the more advanced scopes makes Tek... I can't believe it's so hard! Help, please!

  
  

• Thesis using Labview software

  Good Aftrnoon.

  My thesis is based on software developed by using Labview.  Can anyone suggest the best way to write the main sections?

  For example, how to describe the experimental flow? My ideas have been use explanatory, take the labview code print screens describing what each of the subVIs. Does anyone have experience in this field?  Or if you can share a thesis based on LabView program written, it would be ideal for reference. Thanks in advance

  Kiryl

  If your project markers are not familiar with LabVIEW, then frankly they should not be monitored a LabVIEW project.

  In the same way that you would not be supposed to literally print code of entire base of a project in a written language, you don't need to go into the same level of detail with a LabVIEW project.

  You can document your code with system diagrams, annotate them extracts of interesting pieces of code, writing pseudocode to illustrate the feature.

• LV does not print the barcode fonts

  

  It's the VI, I created to print a barcode. I set up the type size and police and then sent to the printer. But LV does not print the right font. When I made the same format in WORD and print, print correctly.

  Barcode font, I used is not installed on the local PC, but it is available in the printer driver. I guess this is the reason why print all fines. WHY CAN'T LV?

  You can simply use the TCP protocol to establish a connection to the printer on port 9100. The printer is set up to automatically close the connections that are inactive after 5 minutes. If you send only from time to time the label you must close the connection and reopen it when you send the next label. If you send a relatively steady stream of labels, you can leave the connection open.

• Can I give print command to the printer HP color of LabVIEW 7.1. ?

  Hello..

  Can I give print command to the printer HP color of LabVIEW 7.1. ? I asked where I have to calculate some numbers & print them with fixed text... Is it possible to perform the print command of the LabVIEW 7.1 for HP color printer...? Can someone help me please...?

  Thanks for any help on your part...

  You can probably find a solution using report generation screws you can create a report, insert all the data and text you want and print it on the printer by default or on a named printer. The report generation screws are at the bottom of the palette of programming.

• HP LaserJet P2050 Series PCL6: How to print the mark using PCL commands

  Our old system is printing of document using PCL commands, previously, only contanins text and barcode (using BARDimm), but we need now to print the mark registered with the name of the company, that the police should I use which has this symbol? Thank you.

  Assuming that your old system uses PCL5. You must first issue a set of symbol code that has a mapping to the registered symbol.  The Windows Latin 5 symbol set has the R symbol maps to chr (174) or (0xAE) said in

  Hex. The first publication of the code for the symbol set...

  (5 T

  and then the character itself

  0xAE

  Now that the characters cannot be entered directly on the keyboard, then you will need to find a way to integrate the character in your print workflow.

  Before the character himself is printed, you should choose a font. For most, if not all, printer fonts probably supports this defined symbol. For the test I used the arial font and it printed fine. The code for arial 12 pt would be...

  (s1p12v0s0b16602T

  Specify police, symbol set and finally the character. When you printed the character that you'll want to come back to the police in the use and the previous symbol set OR you can print the symbol as a secondary font. If you don't know how, ask here.

  I now have the idea how you would do this with PCL6. @dansdaduk can give you good (or bad) news on that.

• Problem with the printing of barcodes

  I completed a form of Immigration Canada, which is supposed to generate bar codes once it is validated.  The form seems to validate correctly and adds a page for codes to bars, but will not display or print the barcode. I know that the Canadian Immigration Office will not accept the form without bar code... can anyone help.  As it is a widely used form, I am convinced that the form itself is OK.

  For reference, I use an iMac computer and downloaded the 2015 version of Acrobat Reader DC

  Many thanks - Chris

  I guess you got it to work, but I had this problem and found a way to solve it. I leave here for other Googlers who comes here with the same question:

  Download Adobe Acrobat Reader, Adobe Acrobat Reader DCNo.

  On the web to Download Acrobat Reader , select your operating system, language, then the version containing the domain controller in the name (as of this writing the current version is: 11.0 Reader).

  

• I bought an iphone6s from Lithuania, EU. At the back of the box, it is printed "Aproved for use in all countries of the EU". Does this mean that I can't use it in Asia?

  I bought an iphone6s from Lithuania, EU. At the back of the box, it is printed "Aproved for use in all countries of the EU". Does this mean that I can't use it in Asia?

  It does not mean that you cannot use it in Asia. It cannot be repaired in the European Union, however, and may not work with LTE networks in other parts of the world.

• When I click on the file and click on print, no printing occurs by using kodak esp7

  I have the ability to print when you use internet explorer, but cannot get anything it either happens on firefox.

  This printer is selected?

  See the screenshot below.

• How can I find Canon CP910 printer drivers for use with OS10.11.3?

  How can I find Canon CP910 printer drivers for use with OS10.11.3?

  Download the player package Cannon from Apple or get your driver from the Canon support site.

  V3.3 Canon for OS X printer drivers

  Canon Laser Printer Drivers for OS 3.1 X

• waveform, with an average of results using labview to O-scope

  Hello fellow engineers! I'm a first-yeargraduatestudent in CHEE at the University of Houston. Basically, I know nothing about labview. I am trying to program an application that looks like this - I collect a waveform of the signal of O-scope. This waveform does not change its characteristic shape. I need to find the wave form average of waveforms of N (100 for example). Thus, the slight changes (or noise) in the feature of form during the period mustbeaveraged out and I need to have a resultant waveform that represents the average waveform over a period. So, basically, I'm collecting the wave several times (for example 100) on a single period. The O-scope that I use now is Tektronix TDS 2024 B. It communicates with the computer via USB. The version of labview is 8.5. For now, I am able to communicate with the computer using our o-scope through labview. I already downloaded the driver of instruments of your Web site. It turns out that the program can give me only the average result I can get directly from o-scope manually. I need to have more say on average (100) using labview. I wrote a program that relies on the instrument driver that is downloaded on your website (for loop part is average, the waveform). The program that I modified and an instrument driver are attached. The program cannot be fully open, if the driver is not put in the right place in the labview (under lib inst.) When I run the program, the average waveform does not appear on the front panal and signal waveform file is not saved correctly. Is there someone can find where I did wrong and it develop for me? Because I barely know Labview, it will be even better if you can add an image or program that you have changed. I'm waiting for your creative ideas.
   
  With the best regards,.
  --
  Weiye

  
  

• you want to send data using labVIEW to arduino using write visa and the process and to take action using arduino. A

  I want to send data using labVIEW to arduino using write visa and the process and to take action using arduino. After that, I want to arduino to send out necessary via a serial port to labVIEW which should be read using visa read and store in a chain. While I am able to write or read both individually, I can't do it consecutively. I used advanced read and write vi for checking my code, but nothing is helping. The wrong bed 'time delay before execution. " Please let me know where I can go wrong. Also is it possible to write code for hx711 using labVIEW

  1. you need not "\n" on your orders println().  This command adds an end of line character already in the message.

  2. you get the error because you have a loop around your reading.  After the first reading (well technically, the second because of you add an extra line end character), there is nothing left in the port.  As a result, you will get the timeout.

  3. you should really consider using a Structure of the event.  This way you just don't write and read when you press the Write button and you can also use the structure of the event to make the loop to stop.  I also go up to close the port inside the stop-> value Change event.

  

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• Programmatically insert step of ActiveX/COM using LabVIEW

  Hello

  I would like to be able to create sequences like the one set using LabVIEW.

  This sequence has only 2 steps, a LabVIEW VI call and an adapter of ActiveX/COM call.

  I was able to do using an adaptation of the code here: https://decibel.ni.com/content/docs/DOC-36337

  However, I am struggling to add the step of the ActiveX/COM.

  Any help would be welcome.

  Thank you

  Of course, there is a way, if you look for it

  Since you have an existing 'Step' class object, you can also get a 'Module' object for her. Subsequently, you will need to specify that it is an ActiveX module. If you do not know which - probably you need to get the object 'map' somehow... Our case is simpler, so just cast to the ActiveX module and... to set certain properties like ServerId, ActiveXReferenceExpr and so on.

  I've attached an example for you. Interesting thing is the ServerId - I just read this chain of the TS for similar action and reused it here so do not ask me how to get automatically

  You will need to complete your 'properties' as 'file' - but I'll gracefully leave this work for you =.

  Best regards

• Time real ADC/DAC for SMPS by using Labview and USB

  Hi all

  I asked the Sales Department of this same question, so here's a two-pronged approach:

  I am reserching a control algorithm for power switching, and so far, its performance simulations seem to be good.  Now, the goal is to implement the circuit from the experimental data.

  I've seen several NI USB DAQ boxes that seem to have the performance, I'm looking for (for example, the box USB-6211 a sampling rate and resolution I need).

  The control algorithm uses the following mathematical functions: add/sub/mult/div/exhibitor and derivative/integral.

  My question is this: is "strong enough" Labview take four-channel data 250Ksps, crunches the numbers in an equation and spits out the answer to an analogue on the channel, while time REAL?  I'm looking for a rate of analog output of ~ 100 kHz.

  Thank you for any suggestions you have!

  -Rick

  Hey,.

  So if you were trying just to perform an input or output, then the box USB-6211 would certainly be able to treat it as the machine clock could manage the inputs/outputs, no software. However, what you are wanting to do, basically a feedback system, he will have to avoid (at least to a USB device) because you need to be able to specify Active which is the output. So, for this reason alone and the fact that you want out of 100 kHz, this device and the USB devices in general will be not an option any what software you use, LabVIEW or otherwise. On another note, you want to make sounds more like live update, not in real time, which is more on the jitter. Bottom line, for these kinds of requirements, you might need to move to an FPGA card, something like the NI PCIe-7841R would work. It's more expensive, but for your needs, FPGA will be the only option and it comes down to the latency of the bus, but also the response time of software. With FPGA, as shown in the first scheme of the following document, you basically close your software through hardware loop.

  Basics of FPGA

  http://www.NI.com/white-paper/6983/en

  -Ryan S.