Printing problems with a Canon PIXMA iP6000D

Similar Questions

• Printing problems with a Canon Pixma MX882 do not print the correct paper size.

  This is a new PROBLEM.  Never had this problem before.

  I'm under Windows8, 64 bit.

  I am suddenly unable to print all labels postage to NORMAL size = 100%.

  He coinstantsly everything shrinks to half size no matter what I change settings.

  I've looked through the software and the printer settings and may NOT know what is the cause of the problem.

  The assumption is that MS Updates caused the problem.
  The resolution has been going to the Canon USA site.
  The very recent updated drivers was available for my printer.
  Download and install the updated drivers solves the problem.

• PROBLEM WITH USB CANON PIXMA MP550 PRINTER PRINT SPOOLER

  I have a problem with the main PC.  No printer is displayed in the Control Panel printer page. When I try to add a printer the message tells me that the print spooler does not work.  I also get the error: "error 0x000006e". I tried all the usual bugs (via Services', etc.) without success.  Gives the print spooler to think it's on; I have reset several times and he shows IT, but it does not work, says the message I get when trying to add a printer.  I have attached the sfc/scannow process found no corrupt files. I tried a 'restoration' without success.

  The laptop can find the printer, a Canon Pixma MP 550 and it works well but the right main PC cannot find all printers in the control panel or through different programs (WORD, etc.) and will not let me add a few.  The home network seems fine and both computers recognize each other and I can access files on the other computer.  But on the PC, there is no printer on the network.

  Also, I tried the canon Pixma MP 550 "My Canon" routine Diagnostics.  It did not find the printer even when it is plugged directly into the PC's USB port.  This could be a problem of LPT 1?  So, I don't know how to access the LPT to reconfigure.

  I also opened OUTLOOK and WORD and tried to add a printer in this way, but I get the message: "the Active Domain Services are currently unavailable.

  Grateful for any help here.   All the usual bugs have been tried.

  Concerning

  Yesterday sorted Arthur Xie method.  See the link;

  http://social.technet.Microsoft.com/forums/Windows/en-us/3e47b7b6-00A3-47E1-9e28-e615fbff5f87/cant-add-printer-print-spooler-crashes-error-code-0X000006BE?Forum=itprovistaprinting

  It was a registry conflict where there was too many folders/files/etc in the current directory. TY anyway.

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• I have a problem with the canon 5dsr with Lightroom 6 connection I can't drop images directly in Lightroom the camera connected only by the EOS utility help

  I have a problem with the canon 5dsr with Lightroom 6 connection

  I can't drop images directly in Lightroom

  The camera connected only by EOS utility

  Help, please

  Hi mateuszm,

  You cannot drop images directly in Lightroom.

  You need access to the file menu in Lightroom 6 > import Photoshop > and choose your camera as source > select the images to import and import.

• Problem with the Canon LBP 1120 printer installation driver

  Hello

  I have a machine running 64-bit vista Home premium. and I have a Canon LBP-1120 printer. This printer is in good shape and I don't want to buy another printer.
  But the problem is that the only driver that there is, is for Vista 32 bit. And when I try to install, I get the error message saying that I need 64-bit drivers.
  I'll be happy even with basic print function because I do not do more printing.
  Looked everywhere on the web... good .no
  A workaround solution would help me a LOT!
   
  I found this, but the link does not work
  [Quote]
  Hello

  There should be a Vista driver for it that will at least at the base
  print function, although it does support all of the features:
  https://winqual.Microsoft.com/hcl/PR...P-1120&OID=191

  [/ Quote]
  Hello
   
  1. are you able to print successfully?

  3. What were the recent hardware changes performed on the computer before the question software ro?
   
  A Windows Vista 64 Bit operating system is compatible in installation of 32-bit drivers. All the 64-bit version operating systems have the ability to run 32-bit applications, but on a version 32-bit operating system, you are limited to only 32-bit software.
   
  According to the information on the website of Canon, Canon provides only the 32-bit drivers for Canon LBP 1120 printer, 64-bit drivers are always expected. To improve assistance to the topic to download driver 64 bit I ask you to contact Canon.
   
  http://www.USA.Canon.com/Cusa/support
   
  Canon LBP 1120 32 Bit drivers
  
  http://software.Canon-Europe.com/products/0000524.asp
   
  For problems with the installation of the printer drivers 32-bit in a 64-bit Vista system, you can go through the resources in the following article and see if it helps:
   
  Error message when you try to add a printer driver 32-bit on a 64-bit print server: "the folder you specified contains a compatible software driver for your device.

  http://support.Microsoft.com/kb/979385

  Please see the link for more information about the issue mentioned.

  Installing the driver for 32-bit and 64-bit platforms

  
  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/gg463027.aspx
  

  
  

  I hope this helps.

• 6700 all in a single premium printe: problem with printehead on tires all hp offers with no success.its only less than 3 years.

  his 3yrs.old even had a gun for 10 years with no problem.when I was able to contact hp, they said I have to pay it's bs.they just that buy you a new printer.

  Hi @highseas99,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the print head. I'll be happy to help you.

  By your message, you have tried all the troubleshooting. The print head is integrated to this printer and is a part which cannot be replaced. Buying a new printer is the only option, but HP offers printer ' trade-in Trade-up '.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Envelope printing problems with M401dn

  When you print the envelopes with a M401dn Pro LaserJet, the return address is not properly merged, and there seems to be some random jobs printed in the buffer zone; the main address is printed correctly and properly merged.  I noticed the problem with greeting card envelope, and I've never had problems with before on three printers LaserJet previous (LaserJet II, LaserJet 5 p and LaserJet 2100).  With a few #10 envelopes, the return address is properly merged, but I always get the tasks in the buffer zone.

  I get the same problem if I fold a piece of paper in half and then pass it in the envelope feeder.  If the envelope feeder is empty and the paper feeds from the main Board, the return address is properly merged but I always get the tasks in the buffer zone.

  There no problems when you print just the documents.

  I seem to get the same results using the PCL 6 or the PCL 6 UPD driver.

  Any ideas?

  Hmmm... I could have sworn that I updated the paper type "Envelope", but obviously, I did not; with that restored, the problem seems to be fixed. Apparently, the fuser is powerful picky about the thickness of the paper.

  Anyway, if someone experiencing similar problems, the paper setting could well be the cause.

• Photosmart HP: Printing problems with my HP Photosmart

  I had problems with my photosmart for awhile. For a while, when I would plug into the usb port of my computer, I had received the error "the disk you inserted is not readable by this computer. I used to ignore the error and used to print anyway.

  Yesterday, someone pushes my printer without unplugging the usb by behind. Now, when I try to print something, I see in the queue of the printer, the error message saying "communication error: the computer is therefore more able to communicate with your printer." "Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer. I got it done and straightened my computer as well, but it does not work. After that, I opened the printer utility via my computer to print a test page, and it worked really, which is strange.

  Thanks for your help,

  Sarah

  Hi @stoukan,

  I see that you are getting the error "communication error: the computer is therefore more able to communicate with your printer." Turn off the printer, check your printer connections and search for printing errors and turn the printer. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. Check that the USB cable is connected to the appropriate port on the back of the printer.

  Check if the Mac sees the printer is connected.

  Go to the Apple, select about this Mac, system report, select USB.
  Do you see the printer listed?

  Fix permissions of the drive on the Mac:
  Close all applications.
  In the Apple menu, click OK, click Applications, and then click utilities.
  Double-click disk utility.
  Highlight your hard drive / partition on the left.
  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.
  Click on Printers & Scanners.
  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.
  Click OK to confirm the reset.
  Type the name and the correct password.
  Click OK to reset the printing system.
  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  If you're still having problems, please try another USB cable.

  If there is anything else I can help you, let me know. Thank you.

• Printing problems with my printer Epson Stylus NX510 wireless.

  original title: Wireless printer issues...

  Help!  My router died and I work from a Home Office, so I use a wireless on loan from my ISP... it is a temporary solution until they can get out of my house and install a new router. My internet is fine, however, my printer/scanner/copier wireless wouldn't work. So........ I uninstalled and installed using the new wireless 'name' to save it. It allows to copy, but not print from my computer. The computer recognizes it but it says it is offline connection and guard my documents in what. In addition, my Epson Stylus NX510 printer still displays a page with my ink level and tells me that it is printing this page appears but does not read my ink level and it says that my printer is ready to print. My wifi lite is on the printer...

  any suggestions?

  Thank you!

  Jodi

  Hello

  1. What is the operating system installed on your computer?

  2. What is the exact error message you are getting?

  Please follow the steps mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• New to Pro-100, do not print, problems with a color cast or poor shadow values

  Hi forum! I am a new owner of a Pro-100. I have a Pro - 9500 Mark II.

  I have a symptom of having a kind of dominant to my dark values on several tests of purple color printing. I printed with photoshop and everything just app photo apple - same result.

  My blues are supposed to be blue electric/royal, but I'm close to the Navy. Violet is also in shades clear, but not as obvious.

  My nozzel checks look good, I did a cleanup, tried a few different profiles...

  All advice appreciated. The image below is an idea of what I see. I'm not in a piece of color balanced to take a picture of my impression with the monitor. Thank you!

  

  Fixed! I got on the Horn with support canon technique. Mary told me download Print Studio Pro. We made some adjustments and I now have a good impression. the result is great, but the process seems like a band-aid to put on/in photoshop. I wonder if the question is more photoshop, or even more with the software of the printer... But, Cannon was very helpful, the whole process takes about 30 minutes.

• Printing problem with OE - 6 format since the upgrade to IE - 8: no space between the body and the subject line text.

  My computer is configured with XP SP3 and IE - 8. I've been using Outlook Express 6.0 (update of MS according to needs). Messages are always printed correctly. Lately, however, the body of the message printed directly below the object without line - the space between them. This happens on my Brother laser printer and my HP inkjet printer. I have not changed my settings of the printer. I've recently updated to IE - 7 to IE - 8; However, I see nothing in the settings of IE - 8 to explain this change in print. I recently installed "MobileMe" Panel Apple configuration, which has installed a separate set of folders in the list of folders in OE - 6. I did a clean (with Revo Uninstaller) uninstalling the MobileMe Control Panel, removed the extra e-mail account/folders and rebooted. Yet the printing problem.

  How to restore the space of line between the subject and the message body?

  Hello

  1. How is like print preview?
  2. don't you make changes to the footer settings?

  Method 1.
  If that doesn't help you can not save the file wmp.dll
  a. log on as an administrator.
  b. Click Start, type cmd.exe in the Run dialog box right click on cmd.exe, click Run as administrator and then click on continue.
  c. at the command prompt, type regsvr32 oled32.dll and press enter and then click OK.

  Method 2.
  If this problem started occurring recently, you can restore the computer to a previous state. You lose Internet Explorer 8 and return to Internet Explorer 7. In this way, we can check whether or not the root cause of the problem is installation of Internet Explorer 8.
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WINDOWS VISTA BUSINESS AND PRINTING PROBLEMS WITH MY HP 840C DESKJET PRINTER.

  RECENT APPEARANCE, PRINTER GOES THROUGH ALL THE MOTIONS TO PRINT, BUT A CLEAR SHEET COMES THROUGH.  I HVE CHECKED CONECTIONS HARDWARE, OK; CHEC'D SOFTWARE COMPATIBILITY, OK; SMC WOULD HAVE WINDOWS VISTA ONLINE HELP SITES AND SUGGESTED AUDIT SOFTWARE IS USED.  LAURYS ALL OK.  THE MAJOR PRINTING PROBLEM IS WITH MY ONLINE BANKING WHEN I TRY TO PRINT STATEMENTS ETC. ON THIS SITE.  I HAVE CHD'D WITH THE APPROPRIATE SITE TECH PEOPLE AND THAT THEY HAVE NOT HELPED, SAME PROBLEM,...  WOULD APPRECIATE ANY SUGGESTIONS OR HELP WITH SIMILAR PRINTING PROBLEMS!  e > j > t

  Display uppercase is considered shouting & your message is difficult to read and can be ignored by many.

  Say the HP support? Often with an HP printer, the solution the easiest is to unplug the printer, uninstall the HP printer via Add/Remove, runDisk cleaning software and restart. Then download/install latest drivers/software from HP and only connect the printer when the installation says.

  Of course its possible allways the printer failed.

• Printing problems with QuickBooks

  I had to reinstall my HP Photosmart all in one fax 410c and now I can't seem to print the checks in QuickBooks.  If I select print single page fax start screen is displayed.  If I choose to print continuous page, the police of matrix and does not fit on the cheque.

  Thanks for getting back to me. I've seen this problem before, and if you are able to print from other programs without any problem, then the problem is not with drivers and printing software. It's a problem with the Quick Books software. I suggest that you uninstall Quick Books and reinstall. If this does NOT resolve the problem, you may need to contact directly the Quick Books.  Sorry for the inconvenience. Here is a link to the support team dealing with Quick Books.  http://www.infinitelyvirtual.com/contactus.html

  Thank you for your time.