6700 all in a single premium printe: problem with printehead on tires all hp offers with no success.its only less than 3 years.

Similar Questions

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• Printing problems with QuickBooks

  I had to reinstall my HP Photosmart all in one fax 410c and now I can't seem to print the checks in QuickBooks.  If I select print single page fax start screen is displayed.  If I choose to print continuous page, the police of matrix and does not fit on the cheque.

  Thanks for getting back to me. I've seen this problem before, and if you are able to print from other programs without any problem, then the problem is not with drivers and printing software. It's a problem with the Quick Books software. I suggest that you uninstall Quick Books and reinstall. If this does NOT resolve the problem, you may need to contact directly the Quick Books.  Sorry for the inconvenience. Here is a link to the support team dealing with Quick Books.  http://www.infinitelyvirtual.com/contactus.html

  Thank you for your time.

• HP Officejet 7110 wide printer - problem with MARGINS

  Hello!

  I changed my old 1220C for a wide format 7110.

  I try to print from AutoCAD drawings A3 file (I'm an architect), but one side of my drawing always gets cut.

  I tried printing on all available paper sizes, I tried to change the margins, I searched the forums for suggestions, but nothing seems to help.

  I don't need borderless printing, I need to be able to print my drawings with a 25mm from the left edge and framework that is 5 mm lower and top edge, right, but I can't get the right margin less than 16mm (others print correctly).

  When I change the margins manually from the print window in autocad, I have print preview displays properly, but print still cut the right side.

  Help, please. I ' ts driving me crazy, and I have the same problem at home and at work, because we recently purchased the printer even in my office too.

  Both printers are installed on the Windows 7 operating system (one is a 32-bit and the other a 64-bit version).

  I repeat - I have no need to print without borders, just decent margins in my plain paper drawings.

  Thanks in advance for any help,

  IVA

  Managed to solve the problem after more than three hours on the phone with HP support amazing guy

  -install the drivers for the printer large format HP Officejet 7000 (E809a) (link below) and borderless A3 print on plain paper - and I can finally print the designs normally!

  (link to the drivers:)

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3883002)

  IVA

• Photosmart HP: Printing problems with my HP Photosmart

  I had problems with my photosmart for awhile. For a while, when I would plug into the usb port of my computer, I had received the error "the disk you inserted is not readable by this computer. I used to ignore the error and used to print anyway.

  Yesterday, someone pushes my printer without unplugging the usb by behind. Now, when I try to print something, I see in the queue of the printer, the error message saying "communication error: the computer is therefore more able to communicate with your printer." "Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer. I got it done and straightened my computer as well, but it does not work. After that, I opened the printer utility via my computer to print a test page, and it worked really, which is strange.

  Thanks for your help,

  Sarah

  Hi @stoukan,

  I see that you are getting the error "communication error: the computer is therefore more able to communicate with your printer." Turn off the printer, check your printer connections and search for printing errors and turn the printer. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. Check that the USB cable is connected to the appropriate port on the back of the printer.

  Check if the Mac sees the printer is connected.

  Go to the Apple, select about this Mac, system report, select USB.
  Do you see the printer listed?

  Fix permissions of the drive on the Mac:
  Close all applications.
  In the Apple menu, click OK, click Applications, and then click utilities.
  Double-click disk utility.
  Highlight your hard drive / partition on the left.
  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.
  Click on Printers & Scanners.
  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.
  Click OK to confirm the reset.
  Type the name and the correct password.
  Click OK to reset the printing system.
  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  If you're still having problems, please try another USB cable.

  If there is anything else I can help you, let me know. Thank you.

• Want 4507: Printing problems with envy 4507

  I bought my printer a couple of months and everything worked fine. I have not used for a few weeks and now it seems to be a problem. When I print a PDF for example, any black text to print at all. For a Word document, the text (black) comes out as a very light gray. Color of text is fine in both cases. A printer test page prints just color bars, but also some Black hooks. The print quality is fine, its only missing bits.

  This happens if im wireless for my laptop or phone, or via USB connection.  The ink levels are high in the two cartridges, I tried cleaning cartridges and putting back them in place. I also re-installed the latest version of the software on my laptop (Windows 10) and I reset the printer to factory settings. Nothing seems to solve this problem. Someone at - it other suggestions I can try?

  Hello

  Please click HERE to access the procedure which should solve the problem.

• LaserJet Pro 100 color MFP M175nw printing problem with Erorr with "Print queue was not accepted.

  MFP M175nw would not print no matter what MAC or HP labtop... it will show the test without problem page.

  Erorr log shows this:

  W [27/Mar / 2013:19:26:41-0400] HP_LaserJet_100_colorMFP_M175nw__0621F0_: printer takes in charge Create Job but not use of Send-Document.
  E [08/Apr / 2013:21:10:25-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:10:48-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:11:11-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:11:34-0400] [post 112] Print queue has not been accepted.

  Any expert know about this?

  I need to know more information about what is happening here to start. It seems that you are experiencing printing problems, but I can't get a lot of information that you presented. All the information show me is that the file could not be accepted by the print job. I'm going to need to know what it is that you print file type and size, the program you are printing the form, if you are still able to print other documents from other programs, how long it lasts and any other relevant information.

  Departure, we will perform the two resets in this video:

  http://www.YouTube.com/watch?v=31TbWMrTaFk

  Then, if you use a USB cable, make sure to remove (this is important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

• WINDOWS VISTA BUSINESS AND PRINTING PROBLEMS WITH MY HP 840C DESKJET PRINTER.

  RECENT APPEARANCE, PRINTER GOES THROUGH ALL THE MOTIONS TO PRINT, BUT A CLEAR SHEET COMES THROUGH.  I HVE CHECKED CONECTIONS HARDWARE, OK; CHEC'D SOFTWARE COMPATIBILITY, OK; SMC WOULD HAVE WINDOWS VISTA ONLINE HELP SITES AND SUGGESTED AUDIT SOFTWARE IS USED.  LAURYS ALL OK.  THE MAJOR PRINTING PROBLEM IS WITH MY ONLINE BANKING WHEN I TRY TO PRINT STATEMENTS ETC. ON THIS SITE.  I HAVE CHD'D WITH THE APPROPRIATE SITE TECH PEOPLE AND THAT THEY HAVE NOT HELPED, SAME PROBLEM,...  WOULD APPRECIATE ANY SUGGESTIONS OR HELP WITH SIMILAR PRINTING PROBLEMS!  e > j > t

  Display uppercase is considered shouting & your message is difficult to read and can be ignored by many.

  Say the HP support? Often with an HP printer, the solution the easiest is to unplug the printer, uninstall the HP printer via Add/Remove, runDisk cleaning software and restart. Then download/install latest drivers/software from HP and only connect the printer when the installation says.

  Of course its possible allways the printer failed.

• Printing problems with my HP LaserJet 3200

  I'm having a problem with my HP LaserJet 3200. Or maybe with my laptop? Sometimes when I try to print, it shows an error in the printer status area and no ready button flashing on the printer. If I cancel the print job, disconnect the USB printer for 5 to 10 seconds, plug it in again, and then click Print - it works. I can print, copy and scan, so I'm hesitant delete the printer and add it again. I use Windows 7 64-bit. I have the above work around, and this may seem trivial it will work eventually, but I was wondering if anyone has any ideas to solve the problem. Thanks for your help.

  Hi Jwill,

  Thanks for posting on the Microsoft community

  We understand that you have problems with printing. We would be happy to help you with the problem. Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates. This tutorial does not cover printing problems related to specific applications. Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates.

  In order to better help you, please let me know some details:

  What is the error message you get when the printer no longer works?

  Method 1: Run the fixit:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: delete the printer spooler and select the spooler service
  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
   
  Method 3: you can follow the link that will help you solve the problems with the printer below.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please reply with the results so that we can help you.

• HP Deskjet 2540: Wireless printing problems with HP Deskjet 2540

  Hi all

  I have a problem with a printer HP Deskjet 2540 - it prints if I connected a USB cable; However, he refuses to print if I try to print wireless.

  I had initially solved this problem when I went into system preferences > printers and Scanners and noticed two 2540 Deskjet series icons in a window titled 'Printers '. I ended up removing one of these icons and set it as a default, which temporarily seems to solve my problem. Now, I see two icons back in the "Printers" menu and my printer refuses to print over my wireless connection.

  My printer is connected to my internet connection so I don't think there is a problem here - I also recently installed the software for this printer to make sure it wasn't some kind of driver issue; However, it doesn't give me the permanent solution, that I'm looking.

  Any advice? My operating system is OS X Version 10.9.5

  Hey @love2dance,

  Please come back to me and let me know what you have tried.  I found an article by HP which has a more in-depth approach to troubleshooting your network configuration.  Click on the title of the article and start of Solution 2 and work your way down until finish you setting up your printer successfully:

  HP Deskjet 2540 and Deskjet Ink Advantage 2545 Printer Series - "Can't find printer" Error Message appears on the computer for a wireless network Installation

  Note that the steps are for Mac OS X 10.8 but you will find that again, as they apply to your configuration of Mavericks.

  If this set of troubleshooting options is far from establishing the connectivity Mac and printer, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Better luck with this and have a great weekend!

• Printing problems with a Canon PIXMA iP6000D

  I have a Canon PIXMA iP6000D printer and problems to print.  It feeds the paper and acts like it is printing but nothing prints.

  I tried all the trouble shooting in the owner's manual options.  I even tried to unplug and reconnect after a few minutes.  Nothing helps.  Someone at - it ideas?

  Thank you

  Hello

  This looks like a problem with the printer inself.

  Support for Canon
  http://USA.Canon.com/Cusa/support

  Canon PIXMA iP6000D
  http://USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip6000d

  I hope this helps.

• Printing problems with Windows 7

  Since moving to Windows 7, I have problems printing.  What you see is not what you get.  For all programs (Word, Excel, Access) - the info is being printed as if it is printing on a 8.25 x 10.25 instead of 8 x 11 paper size.  I can't print labels because they don't properly space.  NOT SATISFIED WITH WINDOWS 7!

  Friday, April 16, 2010, 05:07:16 + 0000, DeeCaci wrote:

  > Since moving to Windows 7, I have problems printing. What you see is not what you get. For all programs (Word, Excel, Access) - the info is being printed as if it is printing on a 8.25 x 10.25 instead of 8 x 11 paper size. I can't print labels because they don't properly space. NOT SATISFIED WITH WINDOWS 7!

  If you're happy with Windows 7 is of course your choice.
  but I would point out that the problem you are experiencing is not a problem
  with Windows 7. The problem is with the driver that you use for your
  printer (and drivers are written by the printer manufacturers, not by)
  (Microsoft). Either you have the wrong driver or the driver has bugs
  it. or you can use the wrong driver.

  It's just a guess, but my guess is that you have the wrong driver.
  Check with the manufacturer of your printer, either by phone or on their web
  site for the right pair.
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Ken Blake

• printing problem with photoshop elements 13.1

  I recently got an impression of my Photoshop elements 13 problem with my photosmart HP 7520. When I hit print the file I get this message

  The information about the registered printer are not compatible with this version of photoshop elements, or the saved printer is no longer available you will need to check your printer settings before printing

  The printer works in other applacations.

  I tried the update to 13.1 no help

  I uninstalled and reinstalled my printer Photosmart HP 7520.

  I tried to rename the printer.

  I tried to do a different default printer.

  I tried printing from Microsoft option in PDF and I get a message "because the default printer could not be opened" I also get this when you try to print to the photosmart

  all other printing options grey out the "print" key.

  You are very quiet.

• Envelope printing problems with M401dn

  When you print the envelopes with a M401dn Pro LaserJet, the return address is not properly merged, and there seems to be some random jobs printed in the buffer zone; the main address is printed correctly and properly merged.  I noticed the problem with greeting card envelope, and I've never had problems with before on three printers LaserJet previous (LaserJet II, LaserJet 5 p and LaserJet 2100).  With a few #10 envelopes, the return address is properly merged, but I always get the tasks in the buffer zone.

  I get the same problem if I fold a piece of paper in half and then pass it in the envelope feeder.  If the envelope feeder is empty and the paper feeds from the main Board, the return address is properly merged but I always get the tasks in the buffer zone.

  There no problems when you print just the documents.

  I seem to get the same results using the PCL 6 or the PCL 6 UPD driver.

  Any ideas?

  Hmmm... I could have sworn that I updated the paper type "Envelope", but obviously, I did not; with that restored, the problem seems to be fixed. Apparently, the fuser is powerful picky about the thickness of the paper.

  Anyway, if someone experiencing similar problems, the paper setting could well be the cause.