Privilege with sys error

Similar Questions

• my PC crashes with the error"SPCMDCON. "SYS at ADDRESS FBFE7617 base at FBFE5000 date: 3dbdd" any suggestions? that solve my problem

  Now PC crashes with the error"SPCMDCON. "SYS at ADDRESS FBFE7617 base at FBFE5000 date: 3dbdd" any suggestions? How to protect my pc and solve my problem and frequntly turn off my pc what I would do now?

  Hello

  When exactly do you get this error message?

  Perform a clean boot to verify if a third asks the origin of the problem.

  Refer to this article for help:
  http://support.Microsoft.com/kb/310353

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP integrated module crashes with an error btwusb.sys

  I have a laptop Compaq nx 7400. Whenever I load the HP Integrated bluetooth module blue laptop screens with an btwusb.sys error. I downloaded the drivers from hp. Anyone who has a work around this

  I downloaded the drivers for compaq 6820 s and they work. SP34842

• Satellite L650 1LN - BSOD, atikmpag.sys error

  Hello

  I'm from Italy,
  I have a problem with my laptop (operating system, WINDOWS 7).

  After a while I use the laptop, I get an error: the AMD display driver has stopped working and has been restored.
  Shortly after this awful blue screen appears with the error "atikmpag.sys."

  I tried to restore my laptop, but I still have the same error.
  I also tried to install the updated drivers Catalyst, but I install it on my laptop.

  How can I fix it?
  You have a guide to follow step by step?

  Thank you all! Alex.

  Hello

  The error message indicates a problem with the chip of the graphics card or graphics card driver.
  BSOD may occur if the graphic temperature would be too high, it might lead to chart falls down and BSOD.

  I think you should follow the advice of s Ilay and should reinstall or update the graphics driver.
  The old driver must be removed before you begin the new installation.
  In case this does not improve the functionality, I recommend you to perform a complete system recovery.

  Hope that this would finally solve the problems.

• help me with this error code 80070005 Code...

  help me with this error code 80070005 Code...
  my windows is not updated for a few days...
  Please help me...

  You don't have to know which operating system you use, this discussion is for Windows XP, etc. of Vista and Windows 7.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  If you are using Vista, then the denied access is handled differently-
  

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer

  TaurArian [MVP] 2005-2010 - Update Services

• PC Hung and will now restart not [XP Pro SP3]. SYS error at startup as follows; Lsass.exe - system error. The endpoint Format is invalid.

  Original title: PC Hung and will now not restart not [XP Pro SP3]

  PC Gardner - [open Excel, open outlook, being viewed in PDF and word doc being edited].

  Restarted, then - loading SYS error window at startup as follows; lsass.exe - system error. The endpoint Format is invalid.

  Can not very well, or at the end of the message have to turn it off. Tried to reboot several times, same result.

  Just before this happened was a dialogue window appear on my PC, which indicates that Microsoft wanted to investigate problems of software they had observed on my PC that I had not sent the reports to. I approved this request and they took the reports...

  Am currently bimbling turn of safe mode with networking.

  Any smart people able to help me please?

  Thanks George

  Hello

  We will try these steps and check.

  Step 1: Try using some know last good configuration and check.

  Step 2: System Restore from safe mode or safe mode with network.

  Reference:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• nvlddmkm.sys error

  I've had Windows Vista for about 2 weeks now, and I've done 4 fees installs try different confgurations for this error to the LESS to a minimum. When I use the operating system 3d treatment, I get the error...

  "Display driver nvlddmkm.sys has stopped responding and has recovered."

  This seems to be a plague of Vista users, on searching the net for an answer as to why, it seems to happen for all versions of Vista both 32 and 64-bit. Happeneing for people using different video card, ATI and nVIDIA chips. NVIDIA users get nvlddmkm.sys error and ATI users get the error atikmdag.sys.

  This error most commonly appens when I'm a game or using a 3D or graphics program such as GIMP and the Blender and rarely when just using the Explorer. The program that I use currently hangs, and I use the "Task Manager" to stop the programme concerned. If I reboot the system, I get this error whenever I'm trying to use the same or similar program. After the reboot, it is just a matter or an hour, it seems, before that happens again.

  For me personally this has happened using 3 chipsets of different motherboard and 3 different video cards. Same scenario is becoming very frusterating. Someone has ideas News on how to stop this?

  Hi V3X,

  Please use the forum for Support of Vista,

  Unfortunately, it is a known problem that occurred in Vista and Nvidia or Ati driver as you said.  It is not a fix for this yet.  There are a few works about depend on the hardware you have.  If you communicate with Nvidia, they will be able to tell you exactly what to do to work around this problem.

  Sorry again.
  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista fails to start on mv61xx.sys, error 0xc0000221

  My system suddenly no longer starts. The good news is: I managed to fix it and put the solution below, so that anyone can benefit from. The bad news is that the Vista recovery has some (at least for me) unexplained oddities that I'd like to get an answer to. So, lets describe.

  Symptom:

  -The PC stops in the process of starting with a critical failure. Fault that it displays "mv61xx.sys" says it also displays 0xc0000221 error code

  -mv61xx.sys is related to a driver SATA/IDE of Marvel. The error code is related to a Windows driver cannot load, is not present or because it is corrupt.

  Solution:

  -Reset CMOS on the motherboard (Asus P5Q) using the CMOS jumper, remove the CMOS battery and remove the power cord to reset.

  Remarks: (follow the questions below):

  -Note that the solution is nowhere about the problem that Vista has reported. Vista has indicated that it cannot load a driver for some, because it is missing or damaged.

  -Recovery of starting Windows (via the installation DVD) has not solved the problem.  It indicates the fault 0xc0000221 code (probably found it in a log file) and suggests using a previous system restore point to cure the problem. Has done this, but the problem had not gone away.

  -Then, I decided to use the recovery console. The "sfc/scannow" command did not complete, it gave an error. I googled the problem and found that this error can be bypassed by giving sfc additional parameters: "sfc/SCANNOW damaged = C: \ /OFFWINDIR =" C:\WINDOWS "

  -sfc reported no problem. So it's weird: boot Vista reports that a driver file is missing or damaged, but sfc has no problem

  - As an experiment, in the recovery console, I've renamed the driver mv61xx.sys (in C:\windows\system32\drivers) in mv61xx.bak. I restarted my PC. The behavior is different: this time the 0xc0000221 error does not appear, it just went to a black screen. Which makes me think that Vista was previously able to load the driver for mv61xx.sys, otherwise the error reported would be the same.

  -Then I started from DVD, check if sfc was able to detect that I deleted the driver mv61xx.sys (renaming). I ran sfc and... sfc reported no problems, nothing has been repaired.

  So my questions boil up to:

  -Why Vista report a problem with a corrupted driver or missing mv61xx.sys while the symptoms above strongly suggest that the problem lies elsewhere

  -Why the SFC command in recovery console does not repair the mv61xx.sys driver that I have renamed in mv61xx.bak.

  Thank you. Roland.

  (for the answer to the problem, please see the first post in this thread)

  Hi Lorien,

  first of all, thank you for your quick response. BTW, I was unable to boot from the HARD drive when 0xc0000221 error, I found myself stuck in the middle of the boot process, in a black screen with white characters. The only way I could try the recovery was starting from my Vista installation DVD.

  I don't think that the cause of the problem was a missing or corrupted driver (which was what Windows has reported with error 0xc0000221). I think that I could solve the problem by resetting my CMOS. The problem is now completely gone, even on several boots.

  Now with my PC to the top and runs again, I went into the device by your advice Manager. I see only one exclamation point in there that seems to be independent: an adapter (Microsoft ISATAP, probably a virtual network adapter) has a problem loading.  The node relevant in ("Marvell 61xx controller RAID') Device Manager, when you double click it, shows status"this device works properly.". The driver version is 1.2.0.57, it has been WHQL' ed.

  I also studied the event viewer on your suggestion. I don't see any entry with this error 0xc0000221. Which is probably logical: because Windows cannot gain access to this driver, it has limited access to the disk (because the driver is associated with disk: it is a RAID controller), so Windows cannot save the error on the disc.

  So, overall, with my post I have three objectives:

  -Raise awareness of other users a possible fix if they encounter the same problem as me

  -(optionally) to improve the quality of the SFC utility

  -(possibly) improve feedback that Windows gives to the user at boot fails

  -Improve my understanding of the recovery process

  So, back to the SFC. You noted that SFC checks all system files, just a subset. But I expect that the system files that are considered "critical" for Windows are in this subset. However, with mv61xx.sys, this doesn't seem to be the case: Windows reported at the start that he couldn't continue the start because this file is critical for the system, but CFS seem to have another opinion. Could not check if mv61xx.sys is really not in the list of files that SFC analysis?

  Secondly, is it possible that the mv61xx.sys pilot bails out with a 0xc0000221 error code, and Windows boot wrong is reported as a type of "load driver" of the problem, so that everything else goes wrong?

  I looked into your profile and noticed that you do not work for Microsoft. So if you can not answer my questions, I can understand that, since there are rather thorough type of questions, so I guess that only someone from Microsoft can answer those. In this case, would you happen to have a suggestion for a person or a contact forum?

  Thank you

  Roland.

• migrate from Windows 10 failure error oxc ox400d 1900 failed in the second phase of startup with the error during operation of data on my windows desktop 7

  Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.

  Turn off the computer.

  Wait 10 minutes.

  Start the computer.

  The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.

  Launch the prompt with administrator privileges.

  Press the Windows key + X

  Click prompt (Admin)

  Type the following command:

  Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN

  Press enter on your keyboard

  Exit command prompt

  Restart

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• I'm so fed up with the error message that adobe flash broke down.

  I'm so fed up with the error message that adobe flash plugin has crashed. You got two years, in order to solve this problem, and all your proposed solutions do not work. I see no alternative but to return to Internet Explorer. It's so frustrating when I check my emails and click on a link to get the same message over and over again. Why did this problem occurs only with Firefox? It is not the case with Internet Explorer and it is not the case with Google Chrome. Otherwise, Mozilla Firefox is great.

  This from Halofromsue copied here:

  Well as I said in my last post, yesterday I disabled Shockwave in Plugins. However, as you know, you need shockwave and flash for most things... so I went back and set it to say "ASK to ACTIVATE" so when a web page loads and he needs, he will ask, and then I will either say 'Yes' or ' ' and that seems to work. So far, after three hours, it has collapsed and shockwave/flash all work fine when she needs.

  Me: it works!

• failure of backup with CloudKit errors

  My iCloud backups have been failing since May 7 with the error "the last backup failed.

  It is an iPhone running iOS 9.3.2 6s. I deleted the old backups, backups iCloud extinguished/turned on and restarted my iPhone several times but always regularly backups fail. I have 50 GB of storage iCloud and over 20 GB of available - Indians backups previously consumed only about 3-4GB. I have 15GB of available storage on my iPhone itself. Backups performed for about 2 hours before failing. I have an internet connection broadband and does not suspect the errors on the network.

  In order to diagnose this problem, I connected my iPhone to my Mac and captured the underside of the iOS console messages.

  This shows CloudKit report errors that cause the backup to be marked as failed.

  Everyone knows similar or anyone is able to help solve what could cause this problem?

  Thank you

  The 25 mai 11:24: 24 backupd [420] < WARNING >: ERROR: unable to disable backups

  The 25 mai 11:24: 24 backupd [420] < WARNING >: WARNING: during the backup of modified files

  The 25 mai 11:24: 24 backupd [420] < WARNING >: INFO: new attempt after soft error: active record failed to the path ' / var/tmp/tmp.531.J8nkLZ ' (CKErrorDomain/4). That underlie the error: active record failed to the path ' / var/tmp/tmp.531.J8nkLZ ' (CKInternalErrorDomain/1013). Underlying error: the operation could not be completed. (error com.apple.mmcs) 7 (com.apple.mmcs/7). Underlying error: the operation could not be completed. (com.apple.mmcs error 12.) (com.apple.mmcs/12)...

  The 25 mai 11:24: 34 backupd [420] < WARNING >: warning: a retry after error: CKError 0x1273e8770: "Network outage" (4/1013); "Save Active failed" >

  The 25 mai 11:24: 34 backupd [420] < WARNING >: INFO: recover a quota from waiting area items: HomeDomain

  The 25 mai 11:24: 35 backupd [420] < WARNING >: INFO: downloading files of domain: HomeDomain

  The 25 mai 11:24: 35 backupd [420] < error >: MKBBackupValidateKey: key blob is a file with a different inode (101613 instead of 19145054)

  The 25 mai 11:24: 35 backupd [420] < error >: MKBBackupValidateKey: key blob is a file with a different inode (16788076 instead of 19145063)

  The 25 mai 11:24: 37 backupd [420] < error >: MKBBackupValidateKey: key blob is a file with a different inode (99197 instead of 19145156)

  The 25 mai 11:29: 31 backupd [420] < WARNING >: WARNING: during the backup of modified files

  The 25 mai 11:29: 31 backupd [420] < WARNING >: INFO: don't not retrying after soft error: active record failed to the path ' / var/tmp/tmp.571.zvPTRQ ' (CKErrorDomain/6). That underlie the error: active record failed to the path ' / var/tmp/tmp.571.zvPTRQ ' (CKInternalErrorDomain/2022). Underlying error: the operation could not be completed. (error com.apple.mmcs 16.) (com.apple.mmcs/16)...

  The 25 mai 11:29: 31 backupd [420] < WARNING >: ERROR: backup failed: CKError 0x125dcb650: "Service unavailable" (6/2022); "Current record has failed." Try again after 3.0 seconds >

  The 25 mai 11:29: 31 backupd [420] < WARNING >: ERROR: = backup failed: active record failed to the path ' / var/tmp/tmp.571.zvPTRQ ' (CKErrorDomain/6). That underlie the error: active record failed to the path ' / var/tmp/tmp.571.zvPTRQ ' (CKInternalErrorDomain/2022). Underlying error: the operation could not be completed. (error com.apple.mmcs 16.) (com.apple.mmcs/16)...

  I managed to solve this problem using 'Reset network settings' (settings-> general-> reset) - all errors of CloudKit went and the backup was immediately a success!

• OfficeJet 6700 analysis via radio to 90% and then fails with an error of communication

  New HP Officejet 6700 Premium; no error during installation; -device not scan via radio: scan to ~ 90% with the visible image in the preview is when inaccessible window of the Scanner is returned with the error message "Scannner communication cannot be established.  Ensure that your product is turned on, check the connection... ».

  Dell Inspiron E1505 laptop. Vista; Trend Micro Titanium 2011 Dell

  1. Network wireless, print, fax work very well.
  2. Software has been uninstalled, cleaned and resintalled.
  3. Fixed IP address received.
  4. Windows drivers are the most common, HP device firmware is up-to-date.
  5. When the trend is disabled, scanning works completely.
  6. All scanning functions and work completely through USB with active trend.
  7. MS Paint scanning to the device wireless without problem with active trend.
  8. Ports below were opened in the Windows Firewall.

  TCP UDP
  137 137
  138
  139
  161

  427 427

  9100

  9220

  9500

  • Printing and scanning doctor works and ends when the trend is disabled.
  • Print and scan doctor hangs up on Scan Test and returns the same communication error window when the trend is activated but no further information or help.
  • Contacted Support of trend, which has provided information on how to create an exception in the product and advise him to: "... to add the file scanner to the program exceptions list."   Trend has been unable to give advice on what specific HP or the files to add to the exceptions list.
  • File by file, the following files have been added to the list of exceptions of trend without effect:

  C:\Program Imaging\devicemanagement\hpzscro1.exe HP

  C:\Program 6700\bin\HP Officejet HP Officejet 6700.exe

  "\HP Officejet 6700UI.dll.

  '\HPNetworkCommunicator.exe '.

  '\HPScan.exe '.

  '\HPScanDisco.exe '.

  ScanToPCActivation.exe

  ScanToPCActivtionUI.dll

  Toolbox.exe

  ToolboxUI.dll

  C:\Windows\twain_32\HP Officejet 6700\HPScanUI.dll

  '\Scanapp.ini '.

  '\hpxsTwain.ds '.

  • Device IP address correction has been added and listed as an exception in Web site.
  • Other computers are able to scan wireless unit.

  Are there other HP file or file windows called scanner of HP who participates in the scan Communication that must be added or tried?

  A short history:

  After spending 4 hours and countless computers, printer, router restarts, channel changes etc, on the phone with HP printer support, to solve this problem, I was called back to my firewall provider (Trend Micro) when the product is disables scan works. (Yes, it's the same question that I started.)  As you can imagine made me unhappy...? Since I had already made contact with them for advice on how to configure the product before posting here in the first place and, possibly, appellant assistance from the printer.

  The solution was finally trend had me to rename a file in the registry, which, I presume, caused the trend product regenerate a clean version of the file.  As trend firewall exceptions had already been saved, scan over wireless works now! I post the location of the file and registry name, unless you use the identical product etc. to modify your registry database is scary business.

  Naturally, because it was just going to be like that, scan network worked, but then the network printer showed offline and I couldn't online despite shooters evil etc.  In the end today I completely uninstalled the product and the resinstalled it and now everything works.  Hard to be too crazy about HP, when, notwithstanding this saga, HP was right to send back me the vendor of the firewall... everyone gets their turn in the barrel of the dysfunction of the technology, and it was mine.

  What a striped set incredibly complicated of technologies that we depend on.  Travis, thanks for your help and trying on it.

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?