Similar Questions

• RAM for Vista problem shows only 1 GB despite 2GB material

  I have Windows Vista 32 bit installed in my system with 2 GB of RAM, and it worked perfectly. Yesterday my system performance show only 1 GB of RAM and the Ram usage is 60 to 90% of the capacity, I know that max support 4 GB 32-bit system, but how is it ' show only 1 GB? I checked the RAM blocks separately in each lazy and they both works perfectly, yet, it shows only 1 GB? What to do? It's like Vista only uses one of my blocks of Ram.

  Memory of rum diagnostic test:

  Memtest86 + - a Memory Diagnostic tool
  http://www.memtest.org/

  Swap the memory sticks and try to start from with one stick in the slot. Do this for both sticks of memory the. /

• Problems of formatting with Satellite P25 2 GB SD card

  Dear members,

  Although I spent hours looking for an answer to the question above without success, I felt that I had to ask him once more. So, it's here (and sorry if this has been asked and answered already, maybe someone can tell me the right thread...).

  I have a laptop Toshiba P25-S5093, that was my serve. I bought it new over 4 years ago. Recently, I decided to take advantage of the embedded in my laptop SD card reader/writer. I bought a * _regular_ * SanDisk SD 2 GB (* not the HD - SD format *) and when I plug it in, I see the SD blue LED lights momentarily on my keyboard. I can even see that the _laptop reads the correct capacity of the card_ when I right click the icon. However, the system says that the card is not formatted and ask me if I want to format.

  Then, when I'm using the Toshiba format utility to format, it hangs for 2-3 minutes (I see the led Flash SD LED blue) and gives me the following error message:

  * TOSSDFMT: Unexpected error! Error code = 0x0340FF00

  I tried the quick format and a full format, with no success whatsoever. I exchanged for another 2GB SanDisk memory card, still the same problem.

  I downloaded the last SD formatting utility from Toshiba Web site (the latest utility driver looks old, it still 2003) and always without success.
  _Toshiba SD Card Format Utility Windows XP/2000 (v2.01.0; 09/09/2003; 1.75 M) _

  What is so intriguing is that both cards SD I've tried in vain on my Toshiba laptop, * work a lot on my brand new laptop working from another manufacturer *. * These cards are also fully recognized by my Canon or Fuji digital camera *.

  * If I use a USB card reader adapter, these cards are recognized by my laptop. This seems to point to a problem with the built-in SD slot or Toshiba driver / or Windows XP? *

  Notice to lovers? What gives?
  Thank you

  PS: or as a bonus question, what is happening with the warning of 'ready' or 'equipped' Bluetooth? I thought I had Bluetooth in my laptop, but I guess that's not so. Can someone explain to me * what are these BT stacks for * and how they align with what I have built-in hardware terms. Batteries BT BT "ready" but * no match *. I downloaded the following, but my virus detection was not happy with this file:
  _Toshiba Bluetooth Stack for Windows XP/2000 (v4.00.36 (T); 28/04/2006; 26.56 M) _

  David

  First P25 appears to be a mobile American, designed only for the American market.
  If you need information in this series, visit the Toshiba site us.

  One question; You are sure that the 2 GB SD cards are compatible and supported at 100%?
  Seems too large is not supported!

  > as a bonus question, what is happening with the warning of 'ready' or 'equipped' Bluetooth? I thought I had Bluetooth in my laptop, but I guess that's not so

  Did you find a Bluetooth label on the bottom of the unit?
  If not then this laptop has not built into the BT adapter!

  > Batteries BT would amount to BT "ready" but not equipped.
  Yes, a lot of series is not delivered with the BT module but can be improved!

• Graphic problem on Satellite P200-13Z

  Hello

  Satellite P200-13z running 32-bit vista - intel graphics software displays + does not work because of insufficient resources + other checks indicate that the chip has no allocated memory.
  Machine runs Ok'ish on the LCD screen in mode VGA base but of course, for many programs, it is no good.

  Version 1.7, nothing in there to allocate memory for the graphics chip - as in other systems with built-in BIOS system memory for graphics.

  System has 1 GB of ram - updated 2GB with no difference.

  When I bought the laptop H/d has been deleted for reasons of safety, replaced by the new HD & reinstalled vista from a recovery P200D disk then download specific files for this machine from the Download Center, am I missing a file important?

  How do I allocate memory of the chip or do I have a defective chip / / cpu / / mb or other?

  You can not install image of P200D on P200. Both models have completely different hardware platforms. Images of recovery are individual and model specific images.
  If you want to play a little bit and test if you get it working it's Ok, but you also expect that some problems will occur.
  All with images is not so simply as you think.
  Toshiba has designed images for the use of certain models only. It will be too easy to buy a laptop and use some images on different specifications.
  I mean you pay a license and install on 10 laptops. You understand what I mean?

  If you do not have original disk recovery facilities use bare BONES Setup with disk Microsoft facilities and subsequently install all necessary drivers, tools and utilities download page following the link you have posted here. You will see that everything will work well.

• Equium U400-145 memory problems

  Hi, I have the laptop above and I had used it for a long time with 3 GB of memory.

  The system has two locations and in the bottom, I had 1 GB and above, I got 2GB. The system came with 2 x 1 GB and I have kept a module provided and added a new bought Toshiba 2 GB module. The memory is PA3513S-1M2G
  2 GB memory PC2 DDR2 (667 MHz).

  I have just updated to Windows 7. Before I was constantly this that I swapped the two modules autour system crashed when loading, with a screen blue with the Windows startup screen, saying there was a problem with my computer and he was going to shut down to avoid damage. He said I check any recently installed hardware.

  If I have Exchange modules around again, it works great, even on Windows 7, 64-bit.

  I updated the BIOS to ver 4.00 but the same happens.

  I recently bought another 2 GB module to keep the system up to 4 GB, but I have determined that the system will keep crash at startup if:
  -the lower slot has 2 GB with the upper part with 2 GB
  -the top slot has 2 GB and below is empty
  -the bottom has 2 GB and higher has 1 GB

  If the bottom has 2 GB it works, just as superior with 2 GB and 1 GB lower!

  There is clearly something wrong with the ability of the system to deal with memory. [Another poster | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=154992𥵰] asked on memory max capacity of this system and its investigation was * bad * responded indicating that this system may have only 2 GB. * This is completely false * as I've used it with 3 GB without problem for 1 year.

  If anyone can help I would be extremely grateful.

  Concerning

  Lucius

  Hello

  Equium U400-145 has been equipped with Mobile Intel® GL960
  Express Chipset. Is this good?

  Here are some features of this chipset:
  http://www.Intel.com/products/Notebook/chipsets/GL960/GL960-overview.htm

  As you can see the chipset handles the 533 Mhz max modules, so you can use 667 Mhz, but the modules will run at 533 Mhz ONLY

  Here you can find the chipset specifications:
  http://www.Intel.com/assets/PDF/datasheet/316273.PDF

  Point 1.3:
  There you can clearly find the info that chipset supports 2 GB RAM max and modules are limited to DDR2 533 Mhz!

  Maybe you were able to use the 3 GB of RAM but the chipset has a limitation, and usually the most memory RAM is not supported.

• W510 - error HARD drive, gambling problems, calibration of the questions

  Hi all users of Thinkpad and Lenovo. I'm new here and to the community of Lenovo.

  I just renovated W510 a few weeks and love it. Laptop necessary for photography.

  Type series R96RGY4 43195RU

  i5 520 M

  6 GB of RAM [Update 2GB]

  Quadro FX 880M 1 GB

  HD + screen 15'6

  Seagate 320 GB SATA 7200 RPM

  Windows 7 32 bit

  Update Bios to 1.38

  But having some issues, could not find an answer:

  1. as a hobby photographer trying to calibrate using Huey PRO Lenovo recommended tool. Problem is that when I run the software says "could not find the color sensor" and I don't know if I have it. I know, it should be between the fingerprint and keyboard player. What it looks like? How will I know that I have?

  If I don't have it, what is the best [possibly budget] way to go on the calibration it?

  2. question - half-life 2 game. Downoladed by Valve. Played very well from the beginning with the "recommended" video settings But lately the game FREEZE a lot, it's unplayable!

  I installed the latest driver from nVidia 6824, always point of FREEZING. I did back driver, still hurt. [if I remember well, it was well before I did of the nvidia drivers] I lowered same resolution details changed from the top in the middle. None works.

  I use GPU counter acquired with Win 7 and it will never more of 130 f. I even had laptop cooler with 2 adjustable fans, adjusted on the GPU area. If the heat is not the issue.

  3 HDD issue.

  Due to the game that I have run Thinkvantage material test and found 2 ERRORS [could there be FREEZE game question?]

  FAILURE - ERROR WHD20-SR7 targeted reading test

  FAILURE - SMART self-test short ERROR WHD16-59Y

  Here found navigation I use Lenovo Diagnostics bootable CD. I did and got:

  Repair of sector test ATA failed - ERROR ID09H-0 CT code "your drive could not be repaired and must be replaced" [nice]

  I want to emphasize that I installed Xubuntu Linux as a 2nd distribution. HDD shrunk using the Windows utility, install Grub in the MBR.

  All workes very well, except the game.

  Can I communicate with Lenovo and replace the HARD drive? About 198 days warranty.

  Sorry for the long post, did not make too many messages :-)

  Thank you for reading and I would appreciate any help. This day happy user of Lenovo.

  The W510 series is known for having badly mounted coolers, I'm not sure if this applies to Dual Core versions however.

  Even if your time is low, the video memory could be overheating because the cooler has bad contact with them.

  Have you checked the time CPU? What heppens if you run FurMark at extreme burning mode?

  Temp monitor:

  http://www.CPUID.com/softwares/HWMonitor.html

  FurMark:

  http://www.oZone3D.NET/benchmarks/fur/

  You should have this replaced hard drive that's for sure.

• Intel W500 with Windows 7 video card problem

  Hi all

  I installed windows 7 on my w500 (it was Vista when I bought it a year).

  and I have the latest installed updates including graphic driver intel.

  but the ruin the screen. This problem only occurs when I use the themes Aero, and if I use the discreet ATI video card, there is no problem too.

  I tried to change the refresh frequency between 50 Hz and 60 Hz, between 16-bit and 32-bit color depth, is still no way to solve the problem.

  anyone has idea about this problem?

  See the image below:

  Link to photo

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  http://forums.Lenovo.com/T5/X-series-ThinkPad-Laptops/x200-graphical-corruption/Ta-p/244025

  This solution should help you.

  Basically, you need to Option 1 and 2 or Option 1 and 3.

  Option 1: Disable virtualization for directed-IO (VT - d). This can be done in the BIOS Setup utility. When the system is first start (during POST), press F1 to enter the Setup utility. Then enter the Config menu and the submenu of the CPU. Changing VT - d for persons with reduced mobility.

   

  Option 2: Make sure that there is only a single memory DIMM in the system.

   

  Option 3: Make sure the memory of two DIMMs in the system are of equal size. For example, both are 2GB.

• Problem of memory HP Pavilion dv6-3208TX

  I would like to get advice for my laptop. A few days before my phone starts to become slow and it becomes too irritable to exploit. So, I did the Test of memory that failed with an ID of Menory failure in memory Slot 2. Therefore, I made a few trouble shooting mannual and removed 1 GB of RAM which has failed the Test of memory. Now my laptop runs on 2 GB of RAM only. However, it is slow, so I need to upgrade.

  But the problem is with the frequency as the old RAM installed runs 1067 Mhz(2GB) and that I walked on 1333 Mhz(4GB). So I would like to know what is it possible to simultaneously install the 1333 Mhz RAM with 1067 Mhz RAM.

  This is going to affect the speed or I will get a good speed?

  The name of RAM - Kingston - KTH - X3B / 4G (which is what I want to install instead of 1 GB)

  HP Pavilion dv6-3208TX laptop

  OS - Windows 7 Home Basic (64-bit)

  Product no.-LK364PA #ACJ

  Waiting for response.

  Now, don't confuse everything.

  The performance of your laptop will be positively increase if you switch from 2 GB to 6 GB or even 4 GB of RAM.

  According to the manual, 1333 MHz RAM should also work on your laptop, but it will work with a frequency of 1066 MHz RAM according to the manual.

  If the RAM you buy would work in your laptop - you have to really load and see, unless you go for the exact HP pay number in the manual, which you whatever it is, have not the possibility to buy them also that the part is not made now it seems that - in the store part.

  But you can try the Kingston RAM you mentioned, I think it'll work.

  Concerning

  Visruth

• Adding a GIGABYTE 660 OC will void my warranty? Problems of heat?

  Hi - I wait tomorrow my new 8700 XPS and wonders if the addition of this card will void the warranty? I don't see it on the list of cards approved, although I saw some 660 s

  Gigabyte GeForce GTX 660 OC 2GB

  www.amazon.com/.../B00942TK8I

  I was also wondering if there will be problems of heat with long game several hours a day. (e.g. Skyrim/Assassin Creed/Dragon Age Inquisition)?

  I'll upgrade later from the PSU and video card, assuming the case is pretty cool - I have a Coolermaster EVO that I doubt will fit.

  Any other advice on installation? I don't know if the update of the Bios is required for this card.

  Anyway, thanks in advance.

  warranty shouldn't be a problem. Older GPU do not need an update of the BIOS, most recent need of revision of the A10.

  Here's a whole thread discussing what you plan.

  http://en.community.Dell.com/support-forums/desktop/f/3515/t/19611037

  I don't come by that much money on a 660 GTX when more recent, better, faster cards is available for less money, that draw less energy and generate less heat.

  A GTX 960 will well on skyrim and OK on Assassin creed.

  A GTX 970 will be much better, but the OEM PSU is at the limit

  Cooling is not bad at all, just make sure that the case has a lot of airflow around it.

• Upgrade to 4 GB Ram problem - computer desktop OptiPlex 780...

  Nice day

  Thank you for your services.

  I am trying to upgrade my desktop computer model # OptiPlex 780 and it's the standard I force the affected elements before, after I check what is the speed of compatible ram, voltage and timing, then I bought this model:

  KHX1333C9D3B1K2 / 8G

  Sound of Kingston - hyper-x blue or you can check the details by the Munificent code above or visiting them this link:

  http://www.Kingston.com/datasheets/KHX1333C9D3B1K2_8G.PDF

  The problem:

  When I delete the original 2 GB Ram and installed this 4 GB ram on the first location, the departure of light 1 # & 3 led with sound as continuous hum without starter or windows interface.

  I tried to:

  -Change the slot

  -Fix the maximum ram which is 4 GB for each slot up to 16 GB

  -Correction of the original 2GB ram in slot 1 then fix the new ram in slot 2 or 3 and 4

  -Update the BIOS to version 15A and update all the drivers from dell.com

  -I make sure that the ram is compatible Guide Dell book on this link:

  http://i.Dell.com/sites/content/business/solutions/engineering-docs/en/documents/OptiPlex-780-tech-guide.PDF

  So please help me in this case, it is urgent and I used this computer in the main office and my work.

  Thanks and regards,

  BYQ-

  svanwormer

  I have a 780 with the Intel E7500, Q45 chipset and A15 BIOS CPU and I'm running 12 GB of DDR3 RAM. Two 4 GB and 2 GB

  Yep, catilley, I'm afraid, you're just wrong on this point - your info is old, apparently.  I, too, running an Optiplex 780 with an Intel Core 2 Quad 9550 CPU, chipset Q45 and 12 GB of DDR3 memory - in fact, it's the same machine that I write this response at this time.

  As I posted a year ago on this thread, the official manual of Service from Dell for Optiplex 780 confirms it will take up to 16 MB of memory DDR3, 4 GB per slot.  Here is the link, directly from the Dell website:

  

• Problem with Vista, WMP and Creative SB Audigy software

  I have an audio continuous problem that I can't find an answer. The computer is a Dell Inspiron E1505 w / Vista Ultimate Edition and a map of its SigmaTel. (computer detailed at the end of the post) I have Creative Sound Blaster Audigy software installed. I have in fact two problems, but I'll start with the first and main one.
   
  The first problem seems to be quite common now and is listed in this link...
   
  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=04&DL=false&l=en&s=BSD&docid=28DC8E40D7FC2B06E040A68F5B284B0F&doclang=en
   
  Deactivation of improvements solves this problem, HOWEVER... The only problem with that is that I then cannot use my Creative SoundBlaster HD audio software and am limited to graphic equalizer in WMP. I would prefer not to have to do, the software allows a significant improvement in sound quality, and it was not free.  None of the other things to try to disable helped either.
   
  Now my other problem, which is currently more emergency. This problem occurs when the Sound Blaster software is activated. Every so often in random conditions, I'll bring your computer and the sound quality is totally messed up. It's hard to describe, but fundamentally, it becomes really tinny and hollow survey, w / no bass... totally looks like crap to me. As I said, he would only do this every once in awhile and it occurred in general if say, I put the computer in standby mode, unplugged, then took... or a random combination of those involving removal electric a/c. It used to be I could just do a system restore to the last restore point and might solve the problem. But the last time this happenend has not all restore points, I've tried and now I'm stuck w / either its hail and shabby (active SB), or disable the improvements and just using the equalizer WMP!
   
  I enjoy music and plays the music on my computer all the time. I want to at least be able to use my software again, but if anyone knows anything of these problems, I would be very happy to help. Thank you.
   
  Dell Inspiron E1505
  Intel Core Duo T2400 1.83 GHz (667 MHz front bus)
  Crucial 2GB 667 MHz dual channel RAM
  ATI Mobility Radeon X 1400 256 MB graphics card
  60 GB at 7200 RPM SATA HD
  Windows Vista Ultimate Edition

  
  

• M4800 owners: problems of Linux. Looking for drivers.

  My Config:
  Intel Core i7-4900MQ processor (Quad Core, 8 M Cache, 2.8 GHz, w/HD Graphics 4600)
  DDR3L 600 MHz 16GB (2x8GB)
  39.6 cm (15.6 ") UltraSharp QHD + (3200 x 1800) wide angle of view anti-Glare LED backlit guaranteed Premium wallpapers
  NVIDIA Quadro K2100M w / 2GB GDDR5
  2.5-inch 500 GB Solid State hybrid Drive (Will be replacing this with the Samsung 840 Pro 256 GB SSD I already own)
  2 x Blu - Ray burners tray loading
  9-cell (97Wh) Lithium ion with ExpressCharge battery
  Dell Wireless1550 802.11ac 2 X 2 + Bluetooth 4.0
  English internal backlit dual pointing keyboard

  Card reader chip Base for Panel QHD + and Windows 8
  Swipe Fingerprint Reader and smart card reader (Contact and contactless) palmrest, Dell Precision M4800
  Telescope cam/mic QHD +.
  Back cover QHD + Panel when
  Power supply 180W
  Red Hat Enterprise Linux 6.4 English year NHN
  3 years: 7 x 24 proSupport Technical Support & Assistance, NBD, Global

  Linux problems:

  Removed RHEL 6.4 and got 19 Fedora (due to normal use) installation with dual boot Windows 7.

  Have faced some problems touchpad. It sometimes does not recognize touch! Cant' find the dedicated drivers.

  Installed A Nvidia video drivers. Screen looks good but failed to set a resolution (1920 x 1080) below! Full screen! for example I see about 25 ~ 30% a window fully maximized rest overflows off the screen. If someone was able to put in place correctly, please share your xorg.conf. According to me, that it is a problem of pan. Am I wrong?

  And have not been able to find the network drivers for DELL 1550.
  ICP ID: BCM4352

  b43 and b43legacy said that it is still not supported.

  Broadcom BCM94352HMB with chip 1: Broadcom BCM4352 said there is a driver available here Broadcom: driver Linux STA although the readme indicates support 4352 (not BCM4352) has been added, trying to build a loadable kernel provides a module error 2: no rule for target of 4352. Everything indicates that the chipset of DELL 1550 is not yet supported which contradicts the readme file!

  Did someone managed to find the driver for Dell Wireless 1550 linux network?

  TIA

  You can find a driver in rpmfusion-nonfree-updates

  akmod - wl.x86_64 6.30.223.141 - 1.fc19.2 @rpmfusion-nonfree-updates
  Broadcom - wl.noarch 6.30.223.141 - 1.fc19 @rpmfusion-nonfree-updates

  This driver seems to work but I have problems: Wireless link survives for more than an hour and several times during a few seconds. I posted a bug to bugzilla.rpmfusion report, but at the moment I don't know if the problem comes from the kernel, NetworkManager or the driver.

  Research at Netlink messages with

  IW - debug event t

  I noticed a few frames with a = 44 nlmsg_len and a length of payload of 28 bytes which produces the message "disconnected (by AP)" and after that all the reconnection attempts fail

  So right now my wireless link is still almost unusable.

  No information on this issue (successful or unsuccessful) will be welcome

• Problem of having to re - blackBerry Smartphones format memory to use Blackberry 8330 as mass storage device

  So I created it for my BB Curve 8330 (Verizon Wireless service) last night.

  • I formatted the 2 GB micro SD card
  • I changed the drive letter to avoid a conflict
  • I have all the latest updates I know from this announcement. (4.5.0.77 on the phone itself)
  • List of media cards: support 'on', 'none', Mode of mass storage card encryption mode 'on', scoped the mass storage mode when connected to 'yes '.

  Everything was fine. Even had a few tunes out there to jam to.

  Not even 24 hours later, I wanted to add more music and photos to personalize the BB more far. So I plug it into the PC but my computer Vista OS won't let me access the memory card. The BB has popped up on the list of drives, but if I click it, it says I need to insert a memory card into the mass storage device.

  I go to the BB Desktop Manager and go to the media. I have almost the same question.

  Even with a pop of the battery, check the memory card using a card reader (card is good) and the reintegration of the memory card, the problem persisted. I had to re - format the memory card on the BB again (to wipe everything), and then when I plugged in the USB cord, I could access the card again in the mass storage device.

  Reformatting was not a big deal since it's not like anything on the card has not been already saved elsewhere. However, I really don't want to have to do that on a regular basis. I understand the technology hiccups every now and then, but if I have to do every time, it's going to be a pain in the rear.

  So all that being said, is there something that I forgot that I need to check or trouble so I don't have to constantly re - format my memory card and re-load all on it? I have tried to do everything that I could think of and I tried searching these forums very, but I had no luck (or did not use the appropriate search string) in the generation of responses.

  A card microSDHC fixed the problem. The old card memory, I got in it was a regular 2GB microSD card. I bought a 4 GB microSDHC card and the problems no longer exist.

  I wanted to get a card greater new anyway, so I'm glad that all worked where I didn't have to do anything unwanted. The old card memory is great; It would be not just works perfectly in my Blackberry. I'll give it to the lovely lady of the House, who can update the 1 GB card in her phone.

• Suspend problems in mode: don't wake up from sleep

  Hello!

  I just installed Windows 7 to my HTPC. Media Center is great!
  But I have a problem. When I put my computer to sleep he wakes more. In fact it isn't even sleep properly. It seems that everything is turned off but the graphics card. There is no picture but the fan is screaming. He is unresponsive to the buttons of the mouse or the keyboard. Even the computer power button does not wake up or restart. All I can do is press the power button for a while to make the computer stop. I have a Logitech wireless set with PS/2 Sockets. I rechecked all power management settings already. In the BIOS are enabled all supports the ACPI and wake up PS/2 support. I can't understand how to fix it!

  For this afternoon, I tested Ubuntu 9.10 and had similar problems there. In Windows XP sleep works very well, however.

  My transactional includes:
  AMD Athlon 3200 +.
  Asus A8V - XE motherboard
  Kingston 2GB DDR
  GF 8600 GT 256 MB
  Seagate Barracuda SATA 250 GB (for BONES)
  WD Caviar 750 GB SATA (for data)

  Now, I found that it is the USB controller who refuses to go to sleep. There is a hidden feature in Windows 7 that you can use to find problems in the energy saving modes.

  In the command prompt, give a command:
  powercfg-energy
  and it will generate a report on the problems in your system. The report can be found at /Windows/System32/energy-report.html
  My report has revealed that there are two or three USB host that cannot be suspended correctly. After disabled USB support in the BIOS of the system had no problem in sleep. Of course I can't use USB devices more.
  Is there some kind of fix or tweak for Windows 7 USB drivers? Windows shows it has the latest drivers if I try to update.
  My motherboard is Asus A8V - XE, and there Via K8T890 chipset.
  EDIT:
  I found an answer on this thread: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/8059106b-21e2-4d17-bf2f-513a5b5d1d0b/
  Apparently it wasn't a USB socket that wasn't able to sleep but a USB device. I had a USB Memory Stick and the infrared receiver plugged and after removing their sleep works very well.

• Sudden Timeline Lag and playback problems.

  Running the trial of Adobe Premiere to see if its for me. So far I am enjoy it more than Sony Vegas, seems to be much easier to learn and less prone to crashing. I use it try changing a few videos for about a week now and all of a sudden it has started to be very slow. Initially, I had the reading window on the full resolution for both still and during playback, I then noticed that he started trolling, so I dropped down the resolution at 1/4 for both. Fixed it for awhile, but now he starts trolling the 1/4th the quality and I don't see a way to solve this problem. I have not plugged in the additional audio devices or removed something. First just seemed to stop being free of lag. Now, it takes about 5 seconds for her to start to play after I press space and even then he falls officials and freezes the video.

  I also tried to work on a different project that did not freeze for me and he began to do the business of freezing, dropping frames, etc. I don't know what could be the cause. I have to relearn everything I knew originally with sony vegas in about 1 day using first pro. I enjoy first pro, but if I'm stuck in this eternal area of lag I can just stick with Vegas when the trial is over.

  I tried to reinstall.

  I tried to delete all the files related to adobe.

  I even tried to use the new clips and in different formats.

  No solution in sight.

  Data sheet:

  AMD FX6400 Six main Proccesor to 3.3 Ghz

  NVIDIA Geforce GTX 770 2GB

  16 GB of Ram with 13 attributed to Premiere Pro

  Windows 7 complete edition

  Well first really not very well on a single disc system especially hard it the drive is 'green' drive or a disk drive 5400 RPM. If you want good operation and we'll add another drive, any good SATA III SSD transfer rates are about 3 times higher than hard drives.