Problem of having to re - blackBerry Smartphones format memory to use Blackberry 8330 as mass storage device

Similar Questions

• BlackBerry 9360 smartphones not recognized as mass storage device

  Hey all,.

  When I plug this phone with a usb cable, it is driver is however recognized the media card and the device are not listed as the mass of readers of storage... I have no means of access to the content of the support/device card via my computer.

  I checked the bb device options and 'Media Card Support' is 'on '. Don't know how else to fix...

  Please help, thanks.

  Battery shoot first, and then restart the computer.

  Few things to try here:

  http://BTSC.webapps.BlackBerry.com/BTSC/dynamickc.do?externalId=KB19717&sliceID=1&command=show&forwa...

  You said you did, but I included the link:

  http://BTSC.webapps.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB13564

  Here is another link:

  http://CrackBerry.com/BlackBerry-first-steps-mass-storage-mode-using-your-BlackBerry-portable-Flash-...

  You have installed the Desktop Manager?

  http://us.BlackBerry.com/apps-software/desktop/

• Impossible to safely remove external USB HDD - ejection of mass storage device problem

  Hello

  I have a 250 toshiba external hard drive. "When I go safely remove device and click on stop, guests me that ' ejection of mass storage device problem and try later.

  Is there a reason for this? As I have heard it is dangerous to pull the cord without stopping it first.

  This happens usually when something is always access to the USB - HDD.
  Yes, it s dangerous to pull on the cable, because you can lose some data and the file system may be damaged. But if you have a situation where you need the drive to take with you and want to just get out the cable to the USB port there is a little trick to disconnect the security apparatus:

  Do right click on 'My Computer'-> click on Hardware-> click "devicemanager"-> go into "diskdrives"-> then you need to click on the drive that is your USB - HDD-> with the right button and then click on 'Properties'-> in the menu properties of this drive, you must go on "policies" and click on "optimize for quick removal"-> and then click OK and exit this menu and all-> perform a reboot-> closing information fact. :)

  After that, it s safe for remove you your drive even if it s not ejected. :)

  Welcome them

• USB Mass Storage Device problem

  I have the HP Pavilion Elite E9120f desktop computer. Whenever I start the computer, it shows that I have USB mass storage drives, G, H, I and J. However, there is no attached USB mass storage device. No one knows why this happens? I just usually click on the removal of the safety equipment and remove false devices. I get the message "this device can now be deleted without the computer problem. This machine runs Vista and has a 1 terabyte of hard drive. Thank you

  Bart, have you checked in 'My Computer' when this happens to see if the drives are there?  Almost looks like you have a virtual drive on your computer program.  Check also in start/startup to see if he is there that nothing listed that could cause this to happen.  Four readers Ghost is really strange.

• problem ejecting usb mass storage device

  After the synchronization when you try to eject the ipod's message problem ejecting usb mass storage device

  Are eject you using the eject of the iPod in iTunes?

  If you do not have the case, restart the computer with the always-connected iPod.  After reboot, this problem persists?

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

• Problem ejecting USB Mass Storage Device [Unlocker doesn't work]

  Hey everybody,

  Just like everyone else, I get a pop-up message when trying to eject my external hard drive WD: "problem ejecting USB Mass Storage Device. Windows can't stop... "and so on." This does not work when I've only sailed on the disk, but it does, for example, when I made a mistake - check or make a backup. I already checked the forums, but unlike everyone else, third-party programs do not work for me.
  I did the following:

  -closed open task

  -disabled virus scanner

  -used Unlocker and Process Explorer, but he can't find any process that locks my drive. What happens here?

  -rebooted in safe mode

  -disabled indexing

  It makes me crazy that I have to restart whenever I want my drive to eject.

  Oh, and I use Windows 7.

  Can someone help me solve this problem?

  Hello

  (1) is limited to any specific USB device?

  (2) did you try to connect the device to a different USB port and check if you are facing a similar question?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program. Follow these methods and check if that helps.

  Method 1:

  I suggest you run the hardware and devices Troubleshooter to check if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest you to check and clean the boot if any third-party program is causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

   

  Connecting and disconnecting USB devices:

   

  Most USB devices can be removed and disconnected at will. When you unplug the devices of storage, such as USB flash drives, you should be sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.

  If you see the icon remove the device safely in to the far right of the taskbar notification area, you can use this to ensure that devices have finished all operations in progress and are ready to remove. Click the icon and you will see a list of devices. Click the device you want to remove.

  You can use any USB port when you plug in a device you have installed beforehand. However, the first time you connect a device to a particular port, Windows will install the driver for this device again.

• USB mass storage device driver problem

  I have 64 bit computer purchased new in July 2012, running Windows 7 with a Lexmark Interpret S405 printer.  It has been installed and works well for months and today, I asked a print a page on a Web site, and it would not print.  I received an error message indicating that the printer cannot communicate with the computer.  I tried to delete the request for printing, but the computer did not respond.  So I rebooted it.  After it restarted, I went to devices and printers to check the printer, and there the image representing that she needed troubleshooting.  Tried, but it did not fix the problem.  Then I received another message: USB Mass Storage Device has a driver problem.  Tried to find and install the updates for it, but the info said that the driver was already installed.  Can you help me solve this problem?  I'm not a computer scientist, just a frustrated computer user.  Thank you!

  I asked a question yesterday about an error message that says: USB Mass Storage Device has a driver problem.  This morning I tried unplugging the power to the printer and then plugged back in.... problem solved.  No need for additional assistance at this time.  Thanks anyway!

• Need to format the drive due to some problems and having to reinstall Windows 7. I could use the same product key

  Original title: Windows 7

  I am using Windows 7 Home Premium 64-bit SP 1 that have previously been installed then bought my laptop. Product key number is fixed under the laptop.

  I need to format my drive due to some problems and having to reinstall Windows 7. can I use the same product key and where can I get the installer of Windows 7 because I don't have it.

  Thank you

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• BlackBerry Smartphones mass storage device: what!

  Hello

  When I plug my BB on the USB port to load I get a pop-up on the BB asking me if I want to turn on mass storage mode.  What do this exactly?  I always select "no".

  I have a 8 GB card in it, if that helps.

  Thank you!

  It's just a matter if you want to be able to see the memory card on the computer (so you can add or remove files it contains).

  You can find more information about it here:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB11879

• BlackBerry Smartphones trying to transfer photos from mem device bb to the pc using the bb as a storage device but impossible... Help, please

  I read the threads on this and the link that suggested a programme of assistance of the forum. I don't have a media card yet, so the pictures are just in the device memory. I plugged my pc with the USB the bb and he returns as removable disk I have in my computer and reload so I know that it is no doubt being located by my pc. However, when I click on disc of deletion I have, it says "Please insert a disc in the drive I '.»

  I then tried to follow what another user did, using the Desktop Manager and Media Manager for my photos.

  When Roxio opens and I click on 'images', I get a split screen up and down not a left to right as some users have described.

  The upper pane, called 'my media' has nothing and the message says: "this view no results."

  The lower pane, called "my devices" shows all my pictures.

  How can I get these off my bb and on my pc? Media options card I media support, encryption, no mass storage on... all as needed, even if I do not have a Cardinal media.. just in case where it did something to help, which was not.

  I need advice please. I'll be able to get a media card in the next few weeks and then I hope that things will work better.

  Thank you
  CHYN

  Take a look at this tutorial using the Media Manager: http://demos.blackberry.com/mediamanager/na/us/gen/

  At the top left, there is a menu whereby you can select 'connection and file transfer. It should be useful in showing you how to do this.

• BlackBerry showing only not as mass storage device

  When I connect my blackberry to my Vista computer, it does recognize it as a storage device.

  Hi RodneyThomas,

  Do you get any error messages? What is the exact error message?

  ·         Find out which software and devices are and are not compatible with Windows Vista.

  ·         Look for links to drivers and upgrades that will make your compatible computer.

  Windows compatibility:

  http://www.Microsoft.com/Windows/compatibility

  Try to install the software by using compatibility mode:

  Run the program compatibility Wizard

  1. open the program compatibility Wizard the by clicking the Start button, click Control Panel, clicking programs, and then clicking on use an older with this version of Windows program.

  2. follow the directions in the wizard.

  If you are unable to install a program, insert the installation for the program and, using the wizard disk, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Similar problem applies please, check out the links below:

  http://www.BlackBerryForums.com/General-BlackBerry-discussion/6764-USB-device-not-recognized.html

  http://www.BlackBerryForums.com/General-BlackBerry-discussion/6764-USB-device-not-recognized.html

• BlackBerry Smartphones 9100 internal Flash not regarded as mass storage device

  BB 9100 (OS5) when connected to the laptop USB does not show memory internal player "Blackberry1. Only media card shows as drive "Blackberry user tools.

  Tried it on WIN XP and WIN7 and get the same results.

  Synchronization with DTM 6 works fine. Driver USB BB Smartphone is 4.1.0.4.

  My 9000 "BOLD" (OS5) and the Torch 9800 (OS6) show the internal memory and the press card as readers on the same laptop to try with the 9100.

  Is the drive of "Blackberry user tools" the equivalent of what I'm used to because two separate drives on the "BOLD" and the torch?

  Is this unique to the Pearl? Someone else?

  So, Yes, this is part of the 256 MB memory unit.  It's the same memory used for the operating system.  I do not recommend to use in any storage media or documents.  Make sure that almost everything is recorded on the press card.  In otherwise you will fill the memory of your device and eventually the operating system will remove the logs of calls, emails, texts, etc.

  Your 9000 (as well as some other features) boasts an additional memory location that works as a multimedia card integrated.  It's different than the 256 MB memory unit on your 9100.

• BlackBerry pearl 8110 Blackberry Smartphones - a memory card is not currently inserted in the device

  Need help!

  Even after inserting a MicroSD card to the device, the message shows "a media card is not currently inserted in the device.

  I had used this MicrSD card in my old Samsung phone, and he had a lot of pictures. I didn't format and that you just inserted the card but the device is not recogsinzing the card. Should I format before using the card or think that the card must be recognized in the first place.

  I've tried all the settings and options that nothing works

  Any help would be appreciated

  Thank you

  VN

  Have you tried to reboot the device by removing the battery after you insert the media card?

• BlackBerry Smartphones Mass Storage device not recognized...

  I am running Windows XP (Media Center Edition) and at the time where I was using a 8320, I didn't have this problem... but now that I have a 8330, my computer does not recognize the MicroSD card, I got plugged into my phone. It's literally the same card that was in the 8320, and otherwise everything else works perfectly.

  It is listed as an unknown in my Device Manager device, specifically as a "RIM Composite Device".

  * I already uninstalled the drivers of BB on my computer and reinstalled them.

  * I already uninstalled DM and reinstalled - not that I thought he would do anything, but it was worth it.

  * I went to the Microsoft support site and tried to use the drivers they have there.

  * I tried to disable the driver in my device manager and tried to force XP to recognize the device. No dice.

  UH... that's all! Any suggestions?

  Just an update to this issue.
   
  It is not really a solution, but I am sick of XP Media Center Edition, so I did a complete reformat of my laptop and installed XP Pro (as the words of God!) Long story short, my computer is recognizing the card support very well now. I can only assume there was some parameter of the register or glitch in my MCE that prevented the drivers to work as they should.
   
  Anyway, solved! Thanks for the help!