Problem activation of Services network in APEX

Similar Questions

• OfficeJet Pro 8625 not connected to the network - no active web services

  Just bought this printer and cannot get the active web services! Keeps telling me printer not connected to the network. Printing and scanning very well. It is connected via USB.

  Hello

  You need to connect the printer to a network in order to enable Web Services, those who will not work with a USB connection, such as those that require an internet connection.

  You can follow the steps below to connect the printer to the network and configuration for the ePrint printer:

  http://support.HP.com/us-en/document/c03721293

  Shlomi

• I just paid my creative service cloud for a month, but there is a problem with the service, is that someone has the same problem?

  I just paid my creative service cloud for a month, but there is a problem with the service, is that someone has the same problem?

  I paid with Paypal, which is linked to my debit card and already wait two days.

  Thanks to the community

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Problem with location Services

  MacBook Pro (retina, mid-2012)

  OS X Version of El Capitan 10.11.4 (15E65)

  Processor: 2.7 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Graphics card: Intel HD Graphics 4000 1536 MB

  When I go to the Maps app and click on the current location, I get the message "cards cannot locate current position." Also when I drag the local weather on the notification bar is not find local weather conditions.

  I have ensured that allow location Services is checked under Security & Privacy Preferences. I signed on iCloud and unchecked localization services enable and rechecked it.

  The only time wherever I can run is if I go to the activity monitor and force them to leave the following processes

  com Apple.GEOD (923)

  via (919)

  This will usually get the time to work and show the current location, but it doesn't work sometimes in the cards.

  I provided the date and time is correct and it is synchronized with the site time.apple.com

  When I go to the time zone in the Date and time it shows the city closest to me marked with a blue dot, and if I go over it it says "unable to determine the current location at this time.

  I had this problem since upgrade to Yosemite to El Capitan.

  I would also like to add that, in my house, I have an iPhone more 6s, two iPhone 5s, an iPad (Wi - Fi only) Air and two iPad 2 air (Wi - Fi only) who have no problems with location services.

  I have this problem too, but in my case if I returned to Yosemite the problem is solve, there must be something in El Capitan.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• problem with xp service pack 3

  Hi guys need help with my compguys, I'h a problem increases... I used explorere 6 to give birth to xplorer 8. The question began, then asked me to download service pack 3 for xp. Once thi has been downloaded and installed then the reall problem began, as soon as my computer was done after update, it began to interfere with my wifi connections and lan, wifi is not turning on and the LAN did not work, please tell me what the problem is... I don't know that was the problem with xp service pack 3 Please help me.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed SP3?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Device Manager and network connections may be blank after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices and network connections may not display network connections after installing Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  A Windows XP SP3 computer loses wireless connectivity when it returns to sleep or hibernation, or you receive an error message when you try to put the computer to sleep or into hibernation:
  http://support.Microsoft.com/kb/951447

  Windows XP SP3 on client computers can access the network when some DHCP information are not available
  http://support.Microsoft.com/kb/953761

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?

  How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?

  Hello

  an answer your other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/why-do-i-keep-getting-your-Windows-Live-ID-cant-be/268ff99c-E459-E011-8dfc-68b599b31bf5?page=1&TM=1301396733390#footer

• What does "The Active Domain Services is currently unavailable" mean?

  I try to add the PrimoPDF virtual printer driver for my HP laptop.   When you install the software I get the following error msg.

  Cannot install PrimoPDF - PrimoPort printer:-PrimoPDF: (1797).

  When I go into Word to try to add the printer driver, I get the error:

  Active Domain Services is currently unavailable

  -What it means and how do I install the driver virtual while I have this available in various programs printer driver?

  I am running Windows 7 Home Premium 64 bit and have Office Professional Plus 2010, Control Panel also displays Office 2010.  Maybe I have two copies of the installed office and that's the problem?

  Help!

  Tim

  Hello

  1 - is the problem confined to the word?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the laptop?
  4 is the computer connected to the domain?
  5. is the printing device listed in the list of devices and printers?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  You can check out the link and check if the printer is correctly installed.
  Install a printer
  http://Windows.Microsoft.com/is-is/Windows7/install-a-printer

  Check the link to find and install the printer drivers.
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 4:
  The clean boot computer and verify if you are able to install the printer.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

• I have problems activating dreamweaver on new pc using the original activation code

  I have a copy of StudioMX 2004 and had problems activating Dreamweaver on my new pc using the original code. It is said there is a network error, but it does not exist. When I try to activate by phone number they give is of insurance Lloyd's bank. I did a live chat with Support and they gave me a new code that has worked and enabled Dreamweaver but I didn't activate the fireworks at the same time. When I tried to use the new or the old code, I get the same error message and the same telephone number of Lloyds Bank. I tried the live chat, but they refuse to stop them from saying that they do not support Dreamweaver 2004... one of the ideas?

  Have you seen this page with a number of activation for the old (very old) products?

  http://helpx.Adobe.com/x-productkb/policy-pricing/Macromedia-legacy-activation-error.html

  Are you sure that MX2004 will work on your new operating system?

• Active data services

  Hey,.
  I use active data services to update an array element with the use of database change notifications. I was able to view the changes in the database, that they take place. The problem is that the data inserted will be added at the end of the table and if I want to add it at the beginning or in other places, it would be difficult to change the hash table (reduce performance) to include the new data line (I'll have to push the values in the hash table and add the new at the top so that it appears at the beginning of the table).
  
  So the question is how can I do this more effectively?
  
  Is it possible to use another data structure where it will be possible to add data to a post that will automatically push the other values?
  
  Published by: mangun November 19, 2009 17:05

  Hello

  not sure on the AP, in you use JDeveloper 11 g R1 PS1 (11.1.1.2) us proxy to frame which has a method

  /**
  * built the ActiveDataUpdateEvent .
  *
  @param type the type of the event change, could be updated, INSERT,
  * REMOVE, REFRESH, etc.
  the changeCount changeCount @param
  @param key the key of the line (in the case of CollectionModel)
  @param insertKey key to indicate the insertion position
  @param genericConversion param passed to the internal call
  *convertKeyPath
  @param names the names of the attributes to modify
  @param values the values of the attributes to be changed
  * @return the ActiveDataUpdateEvent
  */
  public static (buildActiveDataUpdateEvent) ActiveDataUpdateEvent
  Type of ActiveDataEntry.ChangeType,
  int changeCount,
  The object of the [] key,
  Object [] insertKey,
  String [] names,
  Object [] values)

  ...

  The insertKey can be used for specific key to the line where the new line should be inserted. I was not working with the API set prior to JDeveloper 11 g R1 PS1, then all the I can say is that if this works with the existantespourlesproduitsphytopharmaceuti, then it works with manual API so

  See:

  http://download.Oracle.com/docs/CD/E15523_01/Web.1111/b31974/adv_ads.htm#ADFFD19611

  Frank

• There was a problem connecting to the network

  It identifies the network properly even when I put the password - and that is the password - the comment poster 'there was a problem connecting to the network.  The WiFi network, you are trying to reach cannot be found. "Yet he already told me that the network is correct.  Frustrated!

  Is the network that you connect to your personal or public?  On my home network, I turned on an access control and when you are trying to connect with an unauthorized device, we get similar behavior.  It does not connect despite all the correct information.

• Active Directory Service disabled

  Hello

  I just installed Windows Server 2012. After you have added the DNS and Active Directory functions/roles on the server, I noticed that the Active Directory service is not running, but it is disabled. When I try to start the service, I get the error - The Active Directory Domain Services service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Any ideas what could cause this?

  Hello

  To improve assistance regarding this issue, it would be better to post in the Microsoft TechNet forum.

  https://social.technet.Microsoft.com/forums/en-us/home

  Thank you

  Legaede

• Problem with password reset link - "there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. »

  Hello, account Windows Live from my wife was hacked a week ago and has been used to send many spam emails. As a result, his account has been disabled or closed (we are not sure). Whenever she asks to reset a password and a link sent to a different e-mail account, when she clicked it gets this message 'there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. "She is tried repeatedly, but get the same message. Someone knows how to go beyond that, so she can recover her account? Thank you.

  Hello BBB34,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• While trying to use re set link sent in your email, response is "temporary problem with this service, try again later".

  reset the link

  while trying to use re set link sent in your email, response comes back "temporary problem with this service, try again later" it has been like this for more than 1 month since early December!   Help!

  Hello

  ·        What service provider or of the e-mail client that you are using?

  ·        What version of Internet Explorer you are using?

  ·        What operating system is installed on your computer?

  ·        It happens with all webmail or with any what particular webmail?

  I suggest you to follow the link and check if it helps:

  The problems of access to webmail using Internet Explorer

  http://support.Microsoft.com/kb/2483955

  Post back with detailed information on the issue so that we can help you further.

• Problems to install Service Pack 1 for Vista

  Hello

  I'm running my computer on Vista Home Premium 32 bit only.

  I'll just say everything that happened to that meets anyone knows exactly what is happening. Recently, I received a few DVDs of the trial version of Adobe, who quickly, I tried to install. The installer says I need Windows XP Service Pack 3 or Vista Service Pack 1. I found this curious because I thought that I had installed SP1 long ago when it appeared on Windows Live Update. After checking, I discovered that I had not installed for some reason any. I watched in Live Update for download, but it wasn't there, so I came on the Microsoft site and downloaded the stand-alone version of the service pack. I have closed all the programs that I had running and run Setup. He got to halfway through the installation bar (first?) and has stalled for a while, then extended to the end of the bar and displays an error, which contained a link to this page: http://support.microsoft.com/default.aspx/kb/947366. I followed the steps in resolution 2 and downloaded system update readiness tool. I ran the installer, but it seemed just to stall for a long time, so I canceled and he run. This time I got an error before he began to install (Code: 0 x 80240009). I looked for a solution and came across this http://support.microsoft.com/kb/929833, with some people claiming it fixed.

  I followed the steps and restarted my computer and it is no longer displayed the error, but it just keeps stalling at the installation screen. I decided to see if I could find an alternative

  solution to the original problem with the Service Pack and came across someone who says that McAffee was responsible, which is the virus scanner, that I installed it on my computer. I disabled

  pretty well all of the program, as well as my firewall and restarted the computer again. I ran the installation but got the same error. I have reactivated my firewall and McAffee and now I'm

  at a loss on what to do next.

  To sum up; I can't install SP1 or system analysis tool and I need to.

  If you need more information, let me know.

  Thanks in advance

  Hello, Ember09

  This seems to be an invalid data error code, Service Pack 1 installer was corrupted when you downloaded it, try to download it once more and check if you get the error again.

  Download the stand-alone update: x 64 | x 86

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.