Problems of dictation increased capitalization

Similar Questions

• DOWNLOAD DICTATION INCREASED ERROR

  THE PROBLEM HAS BEEN FOR SEVERAL MONTHS NOW, WHEN I TRIES TO DOWNLOAD ADDITIONAL LANGUAGES FOR MY FUNCTION DICTATION INCREASED ON MY MAC WITH THE HELP OF EL CAPITAN THAT ALWAYS COMES WITH THERE WAS A DOWNLOAD PROBLEM/ERROR TRY AGAIN LATER. ALSO DIRECTLY OR INDIRECTLY RELATED TO THIS PROBLEM IS AN UPDATE TO SOFTWARE THAT I'VE BEEN DOING FOR SIX MONTHS OR LONGER AND I POSTED THIS PROBLEM TO APPLE... THERE ARE AVAILABLE UPDATES INCLUDE IMPROVEMENTS TO THE VOICE/DICTATION FEATURES INCLUDE DIFFERENT LANGUAGES AND IT NEVER COMPLETE DOWNLOADING AND STILL DATING EDUCATION MUST RE-START/RESTART COMPUTER AFTER INSTALLATION AND OF COURSE I'M ONLY ONE IN MILLIONS AND MILLIONS OF USERS OF THE COMPLAINTS BUT APPLE HAS COMPLETELY IGNORED THE PROBLEM AND I KNOW THAT I'M NOT THE ONLY PERSON WITH THE SAME SHAME PROBLEM ON APPLE YOU. WHILE WE ARE ON THE SUBJECT OF THE DICTATION WHEN APPLE EVER GOING TO MAKE AVAILABLE FOR COMPUTERS SIRI MAC AND DO DICTATION WORK AS WELL AS IT THE FACT ON THE TABLETS AND IPHONES, I CAN'T BELIEVE THEY DON'T HAVE NO BUILT-IN SIRI/DICTATION AS THE STANDARD FOR ALL DEVICES FROM NOW HELP MY IPHONE TO SEND ME A MESSAGE WITH THE HELP OF DICTATION IS WHILE I DID NOT TRY TO USE MY MAC WHO NO ONLY IS INADEQUATE, IT IS UNACCEPTABLE. SHAME ON YOU APPLE THE WORLD AS WELL AS DAILY BUSINESS USERS DEPEND ON YOUR PRODUCT AND WITH WHAT WE HAVE IS INDEED A HEAVY FAULT.

  FWIW, all uppercase is considered as shouting and rude. It is also much harder to read because of the lack of change in height of letter. That's why you see books or magazines etc., printed in capital letters.

• Problem of dictation and Siri on cellular data network

  Whenever I have try to use dictation or Siri in 3G or 4 G, on my iPhone 6 using the last iOS 9.3.2,and this does not work, and after a while, Siri informs me it's has problems with the network connection. Navigation works the next second and I had received e-mails while Siri was trying to connect to the Apple servers.

  Of course, everything works fine ofer wifi. I didn't notice this behavior after a certain update, since I have been using Dictation and Siri daily, after the last update. Other services such as FaceTime and iMessages work on cell phone.

  I've already wiped the phone and reinstalled from a backup to iCloud.

  Needless to say, it's very annoying.

  Welcome KSamuel,

  From what I understand, your iPhone works very well except with Siri in 3G or 4G cellular connections. While on these connections, everything else works but Siri. You have erased the iPhone and restore a back up with no results.

  The resources below provide some specific troubleshooting steps for issues with Safari.  I know that you have already tried some of them, but try these steps once more in the order presented.

  Use Siri on your iPhone, iPad or iPod touch

  If the problem persists, restoring the iPhone is a step of great to solve many software issues. This leaves him restore the iPhone again to make sure that the question is not a file that is damaged on the back upward. We will make a new backup of your iPhone and then reinstall it to the factory settings using this article: use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings

  Once done, does not restore the back upwards immediately but set up as new iPhone. Then test Siri. If the problem is resolved, restore back upward and test again. You can restore your back ups using this link: restore your device from an iCloud or backup iTunes let us know how it goes.

  Concerning

• problem of dictation

  I am sure that the problem came after the 2.2.1 update

  I speak Cantonese in Hong Kong.

  Before the update, my watch could dictate my Cantonese in WhatsApp answers

  Now he just misinterpreted my words of Cantonese in English

  I wonder if there are similar problems with other languages

  Hello

  While I'm not entirely familiar with WhatsApp Messenger, the following steps may help:

  After tapping on answer, press firmly on the dial of the watch > If select the language is displayed, press to select your preferred language for your answer.

• How dictate and get air book type?

  I found the speech in system preferences, however not dictation. When I click on "start talking" under edit menu, the computer reads anything, I opened. But doesn't allow me not to talk to the computer which should lead to Siri typing for me.

  Thanks for any help.

  KibinSkokie

  Your Lion operating system or earlier? Dictation will appear that Mountain Lion, with dictation increased appearing in the Mavericks. The preferences window is labeled "dictation and speech", not only of "speech".

• Dictation commands drop-down menu is empty.

  MacBook Pro (mid-2012), El Capitan 10.11.6

  In the preferences of accessibility, dictation, dictated orders, all orders are selected.

  Dictation & speech preference, dictated, dictated increased use is selected.

  Dictation is 'On '.

  When I click on the microphone at the top of the screen icon and select "Show dictation commands" menu drop-down is empty.  Yesterday, the drop down menu list all orders of the dictation.

  How to fix and what did wrong?

  Tom TX

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Problem running 4,80 Bios Update on the Satellite P100-473

  Hello
  I have a satellite P100-473 enriched with 4 GB of ram, using ubuntu 10.04 lucid 64 with nvidia driver.

  Problem with often increase GPU to high temperature (over 100 ° C) using sensors applet to check.

  I guess that's a BIOS and a driver problem.

  Windows 7 x 64 I don't have this problem with the latest nvidia driver (using speedfan to check the temperature)

  I tried to Flash the bios with the latest version => _Update.exe BD1_BIOS (V4.80) version 4.0, I actually and all flashing same mistake you Error - 121. update of DXE etc...

  While the .exe to extract the contents of the flash on your c:\tmp I'll try a bios flash with a bootable usb key and phlash.exe with the BD13C43. WPH.

  The problem is to find the phlash.exe official back... Phoenix does not provide such tools ;(

  I understand the need of simple bios flash on windows... but I don't understand the .iso missing for flashing at the start when the operating system does not match...

  If you have an idea thanks ;)

  Toshiba has offered traditional old BIOS updated (diskette), a long time ago. Now you can find WIN updates only.
  You can try to contact the closest service Toshiba and ask if they have traditional BIOS update.

• Timestamp problem DAQmx waveform

  I have a program that reads analog signals multiple DAQmx using a PFI trigger from a DIO card to start the acquisition.   It uses a registry to offset and Boolean logic to stop the DAQmx read the loop when the trigger is low.  I traced the result to a curve of waveform.  I have a 1000 S/s scanning speed.  I traced the data to a graph of waveform and eye on the individual data points and it is perfect.  Exactly 1 S/s.  The problem: when I increase my 5000 S/s scan rate... I see exactly 1 S/s, but the displayed duration of my test data is 5 x more time.  That tells me that my graph of the waveform is plotted in fact each data point individual 1ms apart.  So basically, there a 1ms all dt in the waveform, and it does not change.  How can I get the real dt of the analysis of data here instead of this arbitrary constant?  When I look at a text of my waveform data file, I see the timestamp below where I'm expecting something ending like that...  0,0010, 0,0017, 0.0025, etc..  Any help would be appreciated.  I'll post the VI if necessary, but other than the trigger power, is a fairly straightforward HERE DAQms read.  Thank you in advance.

  

  The time of LV start date is January 1, 1904 midnight GMT.  Since your shows up to 6 hours before that, he must be GMT - 6.  My horodateurs base are 19:00 31/12/1903, which is GMT - 5.  Eastern time zone.

  Are you any error coming out after your Subvi waveforms?

  You empty an array of waveform data to add.  The default waveform has a T0 zero and a detachment of the 1.  In the Sub - VI of waveform append inside your Subvi if dt' it does not raise an error, (in fact a caveat being the 1802 error code is positive.).  But she proceeds to add data and use the dt and T0 the first waveform which is initially as the default data in the initial iteration.  I think that if you start with an array of wavefrom that has the number of channels of the need, an empty array of Y, but a correct dt.  Then the dt should be correct.  That, or you can put in your Subvi a case structure where the first call, or if the incoming waveform is empty, it is not add and uses only the 2nd waveform.

  You have also a little a Rube Goldberg enters your Subvi.  It could be simplified as shown in the picture as an attachment.

• Weird disk problem

  Hi all

  I see a problem never seen before where I increased the size of the hard drive set up by 20 GB on a thin disk layout, then extended on the disk in the disk on my Standard W2k8 server management, however, the size of the disk in the Local disk properties is still only show 100 GB and disk management displays 120GB. I tried a reboot but saw no change. I left a few screenshots to better describe my problem.

  http://i.imgur.com/ZPevJ94.png |
  http://i.imgur.com/RfXWL9o.png |
  http://i.imgur.com/fYdrISQ.PNG

  Any help would be appreciated. I've been a little slow this week so I really hope this isn't something very basic im hurt here haha.

  I've seen a few times so far, and there seems to be a problem with Windows do not update its partition information correctly. The best way to solve this problem is to increase slightly the virtual disk again, followed by resizing/increase the partition in the disk again Manager.

  André

• Storage won't increase, extended LUN

  Hi, so I'm having a weird problem. We need to increase the size of one of our data warehouses. I've done this process several times before and never had a problem. I increased a LUN on the SAN of 700 GB GB 825. I re-read my adapters on the hosts. When I click on the data store and click on properties of Configuration-> storage on the host, I see the following.

  

  VMware can see so clearly that the storage is here. However when I click on the increase, it does not show the additional space.

  

  I tried a new analysis of many times, no change. I was able to expand a different LUN and extend the data store from this same SAN in the meantime successfully, so clearly, that there is nothing wrong with this side of things. I increased the storage on that store of data a few times before, but nowhere nearly 32 times, which I understand is the maximum number of extensions (this is a VMFS-5 data store).

  Anyone has any ideas or should I open a case of pension?

  With the increase in the data store, you made only resize the partition.  Extensions (32 degrees you mentioned) were necessary front of vSphere 4 or for data storage > 2 TB with VMFS3, where you resized data warehouses by adding additional LUNS (extensions).

  Anyway, try to increase the store of data by connecting to a ESXi host directly instead of vCenter Server to see if it works.

  André

• Increase the capacity of the hard disk for VM

  Hello

  I use ESX 4.0 with vSphere 4.0.

  When there is no snapshots more I would like to increase the capacity of the hard disk of the virtual machine in the menu to change settings / Hard disk. There is MS Windows Srv 2008 R2 64-bit installed.

  What is the right way to do it? Operating system, there is no problem with this increased disc? Primary partition will automatically increase as or what I have to do it myself later?

  There should not be problems with the guest operating system when you increase the size of the virtual disk. After the increase in size in the settings of the virtual machine, you need to resize the NTFS partition in the VM Windows 2008 disk management.

  André

• Problem shared pool (JDBC/Oracle)

  I am facing the problem... it is in relation to the problem of JDBC driver?
  I use the JDBC, Window 2000, driver Oracle 9iR2 and CFMX
  I know you can adjust the size of Share_POOL...
  but I want to know that it is possibble JDBC driver problem?
  
  THX

  I have the problem.
  Simply increase the size of the shared pool.

• How can I clear the cache in safari and I should do periodically

  How can I clear the cache in safari and I should do periodically

  Way the easiest is to go to Safari > Preferences > advanced and check the box that says show develop menu in menu bar. Then, go to the develop menu and select empty cache.

  The only reason is that if you experience the problem and to increase the storage space available on the disk.

• Properties changes color when I turn on screen backlight

  Hello

  My problem is to increase the brightness of the colors by increasing the power of the backlight of the display (Fn + F7).

  The color in CCC parameters are defined by default, with lighting are also cursors by default.

  At the lowest level, the colors of the screen are normal.
  I have the latest version of value added package from Toshiba.

  I would like to send pictures of the device, but not much see what is happening, a screenshot is always the right colors.
  *
  I don't know what to do, hopeless, watching the same colors.

  Sorry for my bad language.
  I use google translator.

  > My problem is to increase the brightness of the colors by increasing the power of the backlight of the display (Fn + F7).

  Can I ask what you want to do exactly, or what is the general idea of this color change?

  The backlight of the display can be reduced and increased by using the key combination mentioned. This change does not affect the colors but only the brightness.
  Low brightness decreases energy consumption and lead to longer battery working time.

  If the laptop is plugged in (with adapter), there s no need to change the brightness of the display.

• HP G62-340US: it will be useful to upgrade my CPU?

  I recently bought 8 GB of RAM and an SSD of high quality for my 6 year old HP G62-340US, but the computer feels not as fast it should with these updates. I have an AMD 2.2 Ghz processor, but the CPU still seems to be maxing out, even at startup. This doesn't seem right, so I ask you:

  Is this old CPU slow down my computer?
  If this is the case, is it possible to upgrade my CPU to something newer and fastest?

  JGSaunders

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on performance issues and wanted to help.

  To start, you can see if anything in this post help with performance problems: HP PCs - increase the performance system and maintenance of your computer (Windows 10) | HP® customer support

  IF that is not the case, then you are against some serious limitations.

  First of all, your PC did not come with preinstalled Win10, so I think that you have gone to Win10 of Win7, right?

  Sorry to be the bearer of bad news, but the problem, that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 laptop driver.

  This means that your PC is probably NEVER going to be fully functional under Win10 because the pilots is needs for all features simply do not exist!

  Secondly, you have installed Win10 32 bit, so you wasted your money by buying this memory.  The 32-bit Windows operating system are limited by the policy of using only a little more than 3.2 GB of memory, regardless of the amount of memory you have in the machine.  There are hacks which allow you to use ALL your memory, but those who violate the license agreement with MS, so we does not allow to refer to them.

  -------------------------------------------------

  One possibility, if you want to go to the trouble, is to do a clean installation of Win10 by using media, created using this link: install Windows 10 using the tool of creation of media - Windows help

  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT.  If you do, the media that results will be different and will force you to enter a NEW product code.

  Once you have that media, you start from it and install Win10 on top of what you have now.  However, you will lose all settings, configurations, and applications in the process.  So reinstall applications, this is what is required if you go down this road.

  However, I did this on an HP DV6 laptop and since then he is working very well!

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.