Problem catalog PSE10 to new PC transfer

Similar Questions

• Problem to make a new partition

  I have a problem when creating a new partition: at the end of the process in the disk utility, may not achieve the partition, error on file system. Can you help me?

  OSX El captain

  First aid can repair the disk, and then try again.

• Problem starting on the new ACER Predator G9-791-73N7

  Hi guys!

  I have a problem starting on my new laptop that runs 10 64-bit windows.

  I tried to reinstall windows and my first boot options is the HARD drive so why my laptop still shows me this screen? If I am connected to the internet, the process takes more time before entering the screen windows... is there a fix for this?

  Thank you!

  

  Hello

  Go to the Bios and disable start-up networ.

  Take windows as first boot device boot manager. If it isn't there, you should do a propper EFI install.

  Steve

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.

• Error: "C:\Program Files/reviversoft\Registry Reviver\unins000.msg"is missing." "Fix the problem or get a new copy of the program.

  Original title: cannot start computer

  Cannot start computer

  This response comes and does not let me start the computer (Message missing file 'C:\Program Files/reviversoft\Registry Reviver\unins000.msg "is. Fix the problem or get a new copy of the program) what should I do to get the computer?

  Hi Dan Maarsman,.
   
  -Did you change on your computer before this problem?
  -Do you have any third party registry cleaner program installed on your computer?
   

  Start your computer Safe Mode and check if you can successfully start.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  For more information, see:

  A description of the options to start in Windows XP Mode

• HP 15-ab029tx: UPDATE: HP Support fixed keyboard problem giving Me a new

  Original problem:

  Playing some games like need for speed or any game, Assassins Creed, counter-strike, Spiderman with WASD controls. After 35-45 minutes the keyboard starts to malfunction. The character starts to move randomly left direction without pressing me a key and to stop it I push on it was ' hard button.

  No problem in games, not because of synaptics Smart Sense. I've owned a lot of portable (3) to be exact, and it wasn't the problem in three others.

  Waste of time with the HP Chat Support:

  Contacted the HP Support, not one but twice. First time the Executive support uninstalled the keyboard driver and takes about half an hour to understand why the keyboard driver is not be shown in the Device Manager. After that I told him that in order for the material to be detected again, you must restart the system and then he has restarted and told me the problem is fixed and class case.

  Second time, Executive support even after say everything that I lived in the previous session started the remote session and continued and tried to update my graphics driver (I don't know why) from Device Manager. I don't know who did his Executive support because my PC has switchable graphics and HP says strictly do not update the system with switchable graphics cards manually from any where but support center HP or HP Web site.

  Finally I convinced to send someone.

  HP technician visit:

  Front panel of the laptop (keyboard + touchpad) replaced. The engineer had to remove each component of the system to reach the keyboard and replaced it finally. But then after a while when I tried to connect to my wireless router, it wouldn't even detect the connection (Yes, he was working just before the part was replaced, but not now). Not yet detected the router in the adjacent room, while all others of my device (cell phones, HP G4, tablets) can detect and connect to it.

  Which is exactly the problem:

  --> Internal Wifi Module Signal fell and it must only be connected to networks when the router or Wifi access point is close to the laptop.

  --> Hardware Wifi is fine, but the signal is removed. Before the replacement of the façade, off my all other 3 laptops and mobile phones, this system had the stronger WiFi signal.

  -->, I am aware of this problem and is not new, same problem happened to my old HP Envy 6 1002TX after that I got is fixed screen. But, as it was out of warranty, I couldn't get it repaired.

  I tried the things:
  1 reinstall the Hardwares.
  2 computer Reset.

  3 HP Support.

  I am currently connected to the internet by using the external USB WiFi card of Tenda. Here is the screenshot:

  

  Aftermath:

  Contact HP support, it took a lot of time to convince them that the problem is not with the software, otherwise they would have lost my time to reset the computer again. I arranged another visit of technician. We'll see if the problem is resolved.

  I searched online if anyone else had anything like this, I came across a comment:

  "Tighten the two fixing screws of a quarter turn each Wifi card in place. Guess he did not rest properly.

  This is the place where I got this: http://www.eightforums.com/network-sharing/22767-wifi-signal-strength-dropped-2-5-bars-2.html

  I reset the system again and packed until everything is fixed.

  A few comments:

  How you can recruit these people in the technical team that may not know yet what the problem is. He saw this thing through remote assistance that remained adamant that it is a software problem and asked me to give. I already told him that the system has already been reset and I tried to reinstall the drivers, but he wasted both of our time. If I were based not so much, it would have closed the ticket already.

  I don't know why these people think customer is a fool and don't know anything. Also, in the course of the support remote he ran a few commands on cmd which were for when you can not connect to the internet, but in this case the connection has not yet detected. I don't know why they do things like these.

  No doubt HP service is great, but you lose a lot of time to prove that you are right. The last time with my laptop 1303AU G4, there was a problem, but the local service station couldn't even find where the problem was. Then I had to search on the internet about this problem and found that it was because of the faulty motherboard and he said to the HP support and finally when only 10 days of warranty was left they took the laptop and fixed.

  PS - I'm no * beep * this time. I want the laptop fixed like new. I regret already buy one of your fancy 6 1002TX model until today and I'm not going to see the same thing happen to it. repair or give my money!

  The problem is now resolved. Finally, HP sent a good technician who changed the WiFi module and the problem was solved. If HP have sent the same engineer before I would ever encounter this problem. Nevertheless, thank you very much.

• Hello. I'm having a problem to download my new CC from Adobe. It seems indicative regional: A12ES.

  Hello, I have a problem to download my new CC from Adobe. It seems indicative regional: A12ES. Thank you

  Hello

  Please install the Adobe Application Manager and then launch it. It should update and install the desktop creative cloud for you application.

  for windows

  Adobe - Adobe Application Manager: for Windows: Adobe Application Manager

  for mac

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager

• How can I move my pictures, files and catalog to my new SSD

  I have all my photos, files and my catalog Lr5 master saved together on an external HD. If I install a new SSD in my PC can I just copy all the files of the Lr5, main catalogue, and photos in the new SSD then launch Lr buy clicking on the main catalog on the new SSD?

  Hi pm8546,

  Greetings.

  Please visit this link and follow the instructions - http://www.lightroomqueen.com/how-move-lightroom-to-new-computer/

  ~ Rohit

• Problem Mobile catalog to a new computer

  I'm trying to migrate to a new computer Windows.  I got the transfer of user data by a store of the local computer, and they did a brilliant job.  On my old computer, my user data were on C:, but on the new computer, C:\ is a SSD boot and data are on D:\.  In particular, active Lightroom (raw, tiff, etc.) were C:\Users\Owner\Pictures, but are now in D:\Users\John\Pictures.  I understand that there is a symlink in Windows that handles the change in the location of the user profile and practically my all programs were able to manage the passage of C:\ to D:\ automatically.  But not Lightroom.

  When I start Lightroom and open the catalog, all the thumbnails are the exclamation "Miss Photo" and all files in the files of the low owner Panel have the question mark.  If I look at the link of the folder in the metadata Panel (see below), I see the folder locations are hard coded in the catalog.  Lightroom does not use the symbolic link.

  

  What is the right way to get the catalog to point to the correct location?  I simply right click on owner? in the Panel of the records (see below), select "Find the missing folder", and then navigate to D:\Users\John?  It seems that this easy solution that I tried to do it without asking first. Or is there another / better way?

  

  Under Lightroom CC (2015) Windows 7 64 bit.

  I simply right click on owner? in the Panel of the records (see below), select "Find the missing folder", and then navigate to D:\Users\John?

  Yes!

  Don't forget that you have at least two backup copies of your catalog and all your photos.  It is easy enough for readers to fail, but the risk increases when material changes.

• New computer, transfer CS4 Design Premium problem

  I had CS4 Design Premium (education) on my 2006 MacBook Pro. The computer crashed, I bought a MacBook Pro 2013 and I am trying to transfer the license or product on the new computer. I don't have the original disks, but I had saved the software in Time Machine. CS4 downloaded on the new computer, but it gave me a license error when I tried to open it. I uninstalled on the Mac to 2013, got my serial number of MyAdobe and I am try to download again, but it tells me that my serial number is not valid.

  I found through the forums/troubleshooting there are a few reasons why it doesn't work:
  -New material/new Mac software is not compatible with CS4

  -All products in the suite has its own serial number and must be entered individually * (I don't know where to find these individual numbers)

  -Teaching discs purchased through 3 parts (College Library) might have codes different series/product numbers

  Anyone have an idea how I can do this freakin thing ' work? I need to get my CS4 working again for school/work and cannot afford to buy another version.

  Thank you!

  CS4 is compatible with lion, lion mt and the mavericks, but NOT to transfer the files.  use the installation files to install your programs.

  If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

• Satellite Pro C650 - problem of disk - need new

  Satellite Pro C650 model number: PSC09A-01V021

  SMART Disk reported an unspecified problem of HARD drive & recommend the backup (done) & HARD drive replacement.
  It runs so slow, that it is unusable. Warranty has expired, I would like to replace the HARD drive myself.

  The failed drive is a Toshiba 320gig MK3265gsxn.
  I'm looking at a WD 500 G 16 M, 7200 RPM SATA 2.5 inch Scorpio WD5000BPKX as a replacement/upgrade.

  I guess that the new drive will be detected / Setup by the BIOS but I don't know if the recovery disks will work with this Western Dig, expansion & faster by car. Can someone advise please?

  Drive recovery questions.
  When I made the recovery discs using Toshiba Recovery Media Creator proposed programme marking the first discs of rare as Recovery Disk 1, 2 and so on. I guess that these disks are my backup of user data. Yes/No?

  The last disc was called Windows Recovery 64-bit environment. This is the factory default backup & must be installed first?
  Is it transfer the recovery Partition and install Windows on the new drive?

  Thank you

  GJL.

  Now when you need to swap the HARD drive I recommend exchanging it with SSD. It costs a little more but believe me laptop s performance will be much better. I ve made the m even and I so happy.
  Laptop starts faster and much better work.

  Disk recovery image is the original recovery image back-up and has nothing to do with your own settings.
  When you install portable aura of factory again and it will be the same situation when you started your laptop for the first time.
  In my opinion, avoid any problem created using drives with new HARD drive. In general there is no limitation and you can use different hard drives.

  In any case, think about SSD.

• Hard drive to new system transfer

  I just bought a HP Envy 700-074. I liked all the specs on this machine, including the extra hard drive Bay.

  I want to transfer a disk 1 TB of data from my old Dell running Windows 7 x 64 to the new system. Y at - there will be problems, or the HP will pick up the drive right?

  TIA

  Clay

  Hi clay,

  It all depends on as they say.

  If the hard drive is SATA and was not in a RAID or used with bitlocker, then you should be OK for using the drive as a hard drive only data.  There may be exceptions because some SATA I hard drives might not work on a port SATA III. In this case, an external USB box could make the drive usable.

• Problems to Windows 7 new SSD

  I bought a HPE-170F with a 1 TB HARD drive and decided to add an Intel X - 25 M SSD 80 GB as drive operating system.  I didn't know that I would run into problems of displacement of the Windows 7 OS to the new drive.  I tried both possibilities.

  First of all, I created with the disconnected original 1 TB drive and HP recovery discs, I tried to recover the OS to the new drive.  The 80 GB drive was already formatted and recognized in the BIOS.  Recovery failed when I received the error message that the new drive is smaller than the original drive.  Of course the 80 GB is large enough to contain the operating system and much more, but the recovery system know it is less than the original drive.

  My another attempt was to create a system image since the 1 TB drive through Windows 7 and using the Windows repair disk C to try to restore that image on new 80 GB drive.  First of all, I reduced the original score from C to about 37 GB for it go below 80 GB disk size.  I managed to create the image system 5 DVD even if I created the ERD at that time here as I did previously.  With the 1 TB drive unplugged, I started with the Windows repair disk that went well until the moment he seems to start restoring image system and failed.  This time the error is "Not in the catalog (0 X 80780003) backup set".

  My next thought is to try a third party software to prepare the original image of the disk system and use this software to clone to the new drive.  I wonder about a number of things.  One, the alignment will be correctly the 80 GB SSD using this method?  And secondly, will install a cloning of lead drive to other operation OS future headaches because he wasn't a clean place.

  Any suggestions or experiences, that I can draw?  Thanks in advance.

  Buy a third-party software like or similar to Paragon Hard Drive Management Suite of Imaging. Burn the disc to boot WinPE supplied with the product.   Download all partitions in combined on your main drive size to not be greater than your new SSD.  If you got your OS up to 37 GB then you should be in good shape.

  Start the WinPE CD image, and an image of the hard drive (all partitions) to an external USB HD, CD/DVD media or hard disk 2 If you have two.  Turn off your PC and swap in the new SSD. Boot the WinPE image boot disk and then restore your image to your new SSD.

  Once you get your SSD to start then go to management-> disk management computer, fully extend the screen and see how you can use to add may to your partition C of unallocated space.

  I'd rather not use freebe products as they do not have the WinPE boot disk.

• Adobe Acrobat Professional Version 8 to new PC transfer

  Recently I got a new PC and I would like to transfer Acrobat Professional Version 8 on the new pc.   Is that possible since this is an older version?

  There is no transfer as such, but a turn off and reinstall it on the new system. The problem, you do face with AA8 is it is probably not certified for the new system, particularly Win8 (32 or 64 bit). The specific operating system is a problem. To be sure, the only way is to try to install AA8 and then perform updates (if the installation is successful). You will probably find that the printer Adobe PDF and AcroTray do not install or work. In this case, you need to create PDF files through a work-around (creating a new Adobe PDF printer with a PostScript driver for another printer and affecting the FILE port). The key is if Acrobat itself and Distiller work. Then, you can possibly make some corrections, but not perfect.

  Depending on your situation, you can upgrade to AA XI. Unfortunately, you will need to purchase the full product since AA8 is not a product registered for the upgrade (need at least AA9).

• Building a new PC - transfer CS6

  Hello

  I was in a world of pain PC for several months. I'm about to build a new PC. I begin to start from scratch to ensure that do not transfer any gremlins of the old box. What should I do in advance to make sure that I have no problem using PS CS6 and 5 Lightroom on the new machine?

  Thanks in advance.

  David

  Make sure that you click on help on or off.  It not disable you it will be considered activated even if the computer trashed.  You are allowed 2 activated copies.