Problem error 200019

Similar Questions

• PXI-6229 gives error 200019 when they acquire more input 25ch

  Hello

  I'm trying to measure voltages with the PXI-6229 32ch and PXI-8106.

  If I build attached VI and it works very well when acquiring less entered 26ch

  defining "Physical channel" VI "PXI1Slot2 / ai0:25".

  I think that the PXI-6229 32ch of analog input, but it gives an error-200019

  When I tried to measure more 25ch entry affecting "Physical channel" "PXI1Slot2 / ai0:26".

  Please help me solve this problem. Thank you

  Moussa

  Hello Moussa

  Thanks for posting your question on our discussion forum.

  I'm Junichi Terao NOR Japanese.

  I looked in the PXI-6229 and your VI spec sheet, and it seems that the error is caused by the sampling rate you use. Please look below the PXI-6229 (page 1) specifications:

  http://www.NI.com/PDF/manuals/371290g.PDF

  6229 PXI for multi channel maximum sampling rate is 250 kech. / s (aggregation).  If the maximum sampling for each channel can be calculated as follows:

  FMAX = 250 k / number of channels

  When you set 26 channels and sample 10000 s/s, it is greater than 250 kech. / s. This could be the reason for the error.

  If you plan to use 32 channels, each channel sampleing rate must be less than 7842Hz

  Sincerely,

  Junichi

• Problem error failed to set KB2345886. It's a real headache! help, advice appreciated.

  Problem error KB2345886

  See the following topic for your question

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c82fa2ea-6c79-49D1-9AF1-c5c13287dea9 >

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Host process generic for win 32 services has encountered a problem error message

  Host process generic for win 32 services has encountered a problem error message. How to fix

  Hi MarkGanbucci,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. That you receive the error message?

  See the Microsoft articles below and check if it helps.

  Generic host process error message and a flashlight icon appear

  http://support.Microsoft.com/kb/821690

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

  http://support.Microsoft.com/kb/931852

• Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk.

  Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk. I am new to the computer world and that you just want to remove info a diskette and put the information on a CD. Can someone help me please?

  Hello
   
  
  1. are you able to use the other disks?
  2 have you tried to use this disk on another computer?
   
  The article below explains this error message. It is possible that data on the floppy drive went bad. I ask you to check whether the floppy drive works on another computer.
  Quick format in no. ID address mark results found
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;130627
   
  
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  Try this FixIt:

  Code error '0 x 80070646', '646', or '1606 ' when you try to install Office updates

  http://support.Microsoft.com/kb/2258121

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How can I correct I tunes problem = error code 42404?

  How can I correct I tunes problem = error code 42404?

  How can I correct I tunes problem = error code 42404?

  Post in the forums of Apple iTunes?

  Otherwise - use something like Revo Uninstaller (trial version) to make a more aggressive removal of ALL Apple software.  Reset.  Install the latest version of the web page.

• PROBLEM: Error 201 then manual download and now this... all for the trial of the PS. Ridonkulous!

  I spent over 3 hours trying to get this to work.

  First this thing creative cloud featured on my menu bar, but when I clicked it, it was empty.

  Then, I had to uninstall

  Then I had to clean the machine

  Then, I had to reinstall

  Then I had to start in safe mode

  Then, I had to reinstall it again

  Then, I had to unplug my router

  Then, I had to pee

  Then, I had to unplug my router again

  Then, I decided to walk the dog because it was still more than a waste of time to get this stupid error code

  3 hours later and I'm still dealing with this crap.

  Computer: MAC

  Operating system: OS x

  Version: Yosemite

  Problem error 201

  Then go into manual download - managed to get that to work for this thing stupid creative cloud.

  Now this: 2016-06-30_2018 - nlj2016 library

  What is amazing, is how long it takes to understand.

  What incredible mental masturbation just for a trial of photoshop so that I can understand how to use a PSD template for my facebook ads.

  And what loss HUGE absolute energy, time and effort for a company making BILLIONS of dollars, which can not afford to have someone understand this.

  Ridiculous.

  Hi all, I've tried all the various patches that were on these discussions and nothing worked. I finally found a way around it and spin back normal, but it was a trip. My summary is on this thread.  https://forums.Adobe.com/thread/1445371

  Seems in my case I went from error 201 error 123 and Adobe saying the question was my environment and necessary upgrade to the new Mac OS (not not the case), so the community has led me to the solution despite the insistence of Adobe that it was on our side and if we'd have just update our OS their thing would work... hogwash.

• Portege R600 of fingerprint problem: error: could not open the specified database

  Hello

  I am trying to give the registration of fingerprints for my Toshiba Portege R600-101 and I get the above error.
  I tried also on windows XP and Vista.

  Has anyone with the same problem or anyone suggesting a solution?

  I uninstalled the truesuite Access Manager but still the same problem.

  See you soon.

  Hello

  I noticed a new update for software fingerprinting for protected R600.
  Remove the old application of fingerprints, restart the laptop, clean the registry and the system using a 3rd party too (CCLeaner is free and not bad).
  Then reboot again.

  Download the fingerprint on the page of the European driver Toshiba Software and install again.

  Check it out!

• Satellite X 200-problem error and pilot screen

  Hello

  I got strange error with orginal drivers nvidia - my X 200 use Toshiba drivers, but they are old (2007).

  error looks like:
  http://zapodaj.NET/e47901e259d7.jpg.html

  I use Vista, Windows 7 and Linux OpenSuse - and it looks the same on them.

  any suggestions? ideas? solutions?

  Sorry for my English

  Hello

  Have you tested the laptop to an external display?
  This problem appears on the second screen?

  If this isn't the case, then it means that your internal laptop screen is affected.
  But if the same will not show second monitor and a graphics chip could be affected.

  In both cases, the Asp (service partner) must be attached.

  Welcome them

• Equium L40-156: graphics card problem - error code 12 in Device Manager

  People of the night...

  Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).

  Tried the drivers that I had with the installer
  Tried the drivers from the toshiba download page
  Tried the drivers on the Microsoft Update site
  Tried the drivers from the website of intel

  All have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.

  Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
  Display settings do not display a connected device, DXDIAG had no idea either.

  Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere

  Any suggestions, greatly appriciated

  Ta

  Hello

  I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.

  ------------------------------------
  + Error code 12 +.

  + This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.

  + Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +
  -------------------------------------

  Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
  I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
  You can use the Toshiba Recovery CD/DVD of restoration!

  All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.

  Check this box and report if the same error is displayed on the laptop with the factory settings!

  Good bye

• OfficeJet Pro 8610: Get the Permission of HPeprint or security problem error

  I used printing wireless for several months successfully to print from my work computer, but am now able to print to the e-mail address provided.

  The error reads 'your message was not delivered because of a permission or a security problem.  It may have been rejected by a moderatory, the address can only accept email from certain senders, or another restriction to prevent any delivery.

  The Organization rejected your message: hpeprint.com. »

  I've reconfigured my printer to my router.  Any suggestions?

  Hey @LoreeW,

  Welcome to the Forum from HP Support. I hope you enjoy your experience here.

  I understand that you have a few problems with ePrint using your HP Officejet Pro 8610 e-all-in-one printer.  I want to help you with this.

  I recommend that you first check your printer to verify its intact ePrint connection:

  • Touch the icon (webservices)
  • If you see an address @hpeprint.com, I recommend that you try to send a test ePrint from a different email domain than what you use on your work computer.  If it prints correctly, we can rule out your printer as being a factor in this particular issue.  If your printer's Web services is enabled is more, re - enable.  Any problem would occur with this, click here to access another relevant post I created.  Scroll to my suggestion re: setting a manual DNS as this tends to help by allowing the webservices where fail the normal steps.

  If you were able to send your printer work ePrint of any e-mail domain other than the one you use at work, read on.  Click here to see an HP ePrint article that focuses on the various factors that can contribute jobs ePrint not printing not.  Note that some areas of corporate email may become incompatible with ePrint due to the presence of a digital signature in the outgoing message template.  EPrint jobs you send work meet these criteria?

  Please let me know the result of your troubleshooting by responding to this post.  Thanks again for reaching out in the Forums - we are always happy to help you.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below.

  Have a great day!

• Drive CD/DVD on laptop Satellite L problem - error Code 39 code

  Hello

  Could someone tell me if there is a updated for the TSSTcorp CDDVDW TS-L632H ATA Device driver? The device is not available as a selectable drive and in Device Manager it reports the following error:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I removed the device and the driver, but on the hardware analysis; Vista re - install the default driver and returns the same error.

  Because of this error, I can't update the firmware of the player and the update of the firmware can not see the drive.

  Any ideas?

  Thanks in advance.

  Hey Buddy

  What to say about this problem is known and caused by bad Windows registry entries.
  Microsoft has published and published items of knowledge.

  Check this box:
  http://support.Microsoft.com/kb/270008/en-us

  I recommend first of all remove the reader of CD/DVD from the list of devices in Device Manager. Then, completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally, restart the laptop.

  All that s.

  PS: you will find this solution also without my help. You must use the search function of the forum! It s useful!

• Satellite 5200 903: cooling problem error message

  a few minutes after the start of my Satellite 5200 903 (xp home sp1) an error message apears: "problem with the cooling system, shut down your system and send it to the service ' (this is a free translation of the German..) I installed a temperature control tool, the software displays the temperature of the processor about 60 ° C, but I don't hear the fan...
  Can anyone help?

  Hello

  You have a good chance that it is only a cooling module.
  This warning message usually appears because the CPU cooling module can cool the CPU properly or it does not.
  However, the best way is to contact the Toshiba service partner in your country. Ask the guys notice and I am sure that you will get an appropriate response.

  Good luck