[SOLVED] A3500-FL problem after factory reset

Similar Questions

• RNDU2000 problem after factory reset

  Hi all

  A friend of mine gave me his RNDU2000.

  I tried a factory reset. RAIDar find to restart and gave me the choice. I chose XRAID2.

  After several minutes (test drives, intallatation...) device reboot and stuck with these configuration LED: Power On, Bill, 1, 2 flashing.

  RAIDar is more and I had no access to admin frontview.

  I changed hard drives, are doing a factory reset again and got the same results...

  Ping device response.

  Any idea?

  The firmware on the flash has been corrupted, so I put the latest firmware on the flash.

• Model: 15-r53cl: problems after factory reset

  Hello, I need help. After I factory zero my PC, and when it turned on it was blinking symbol hp for about 30 seconds. Then things would turn black screen, then I see the hp symbol and this continues to repeat. Can someone help me, thanks.

  Hi @Jd5400,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your 15 HP laptop and having starting problems.  Try to make a hard reset.
  
  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.
  
  Hereis a link to computer does not start for Windows.
  
  Plug the adapter directly into a different wall socket. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Windows detected a hard disk problem after factory reset?

  I have a Toshiba Satellite C855D-S5320, not old at all. I tried to download a game and then got the BSOD. I had to reset my PC, lost what I had, but ended up from scratch. Now, every so often, I get a message saying "Windows detected a hard disk problem. Back up your files immediately to prevent the loss of information... ». I have right click the disk hard "defective" for the error checking, no errors found. I tried HD Tune Pro, and tells me 'Warning' for the State of health (05) reallocated sector count (failure) is red, and number of events (C4) reallocated (warning) is yellow. Does this mean I have to replace the hard drive? The computer was working completely fine until BSOD. Now it works and everything but I get this error message. The laptop is not only really old and never any injuries, but perhaps past warranty. I really have nothing left to save, because I lost everything when I have to reset it to factory State. Any advice?

  It's really up to you.  Sometimes there may be false positives, but it looks like your drive is really having some problems.  It was even the cause of the BSOD, who knows.

  You can follow the steps of my colleague here to check your drive for errors:
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  But really, I would take the advice and replace the drive.  Or at least be prepared for this 'die', then save your files somewhere else like OneDrive or something so you don't lose important information when it does.

• Droid Razr UI after factory reset is different.

  Hi all

  I was faced with problems similar to this (Gallery crash after update OTA ICS)

  https://forums.Motorola.com/posts/61d8193cf3?start=46&stop=60

  I've been following the thread and did a reset.

  Now, I find that the problem is solved, but the user interface after factory reset is different from the original user interface that comes with

  Update of ICS. I kinda like the previous user interface. I guess it's Motoblur. Is it possible to get that back.

  Thanks in advance.

  ~ Satish.

  
  

• After factory reset, I can not connect my iphone6 with itunes

  After factory reset, I can not connect my iphone6 with itunes

  What happens when you try? You get errors? -AJ

• If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  Yes, you should be able to reinstall, but if you can you should disable before resetting the machine.  Otherwise, if the two license activations were used and no reset you will need to contact Adobe Support by chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

  Hello

  So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

  If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

  I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

  Thanks in advance.

  Hello

  I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

  Kind regards.

• After factory reset, cannot download KB2868116

  Hi, on a factory reset on my lap top and after taking advice on this forum "CT", I was able to download all windows 7's updates except for KB 2868116. It show the error 800b0100 code. Can anyone tell how to solve this problem.

  Hello

  To help you in your query, you can check the following:

  • Open the Windows Update Troubleshooter
  • Article on error 0x800B0100 when updates installed by Windows Update or Microsoft Update.
  • SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan SFC enforcement procedure:

  1. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. Click on continue or provide administrator credentials if prompted.
  3. In the command prompt window, type the following sfc/scannow and press ENTER:

  Refer to this article for more information.

  Let us know how it goes.

  Thank you.

• Stuck after factory reset

  Hi - I had a problem with my Yoga 2 tablet because I ran out of space of storage due to being "Misc" full, so as suggested elsewhere here I did a factory reset. On back on I'm stuck in the language and time zone region selection page. I chose English UK and London, Dublin, but I can't move any further. Any advice? I tried to turn and turn it on again...

  SOLVED

• HP pavilion touchsmart 15: wireless issues after factory reset.

  I had a cell phone of a close and factory reset it then, I encountered a problem with the wireless internet. He goes out and in disconnects and reconnects I'll get changed network errors and no internet errors. At this point and the pc was windows 8 then I WAITED for some messages I had run through a stated that they had there problem solved by going to 8.1 so I did and updated, the problem persisted (at this point, I've abandoned troubleshooting on the laptop and went to my Tablet and searched there) then I found a hp here similar to my dellima post , but with a different model, so I followed the steps but fill the egg whites with the model I use SLIGHTLY the problem better now, he died but not so often. nothing else in the network goes off, and I tested it on that the same thing happened at a friend's House.  (I spent 12 hours Googling for answers HELP)

  MODEL number: 15-b129wm

  If this help it contains an atheros model ar58125

  Hi there @Jeremy169,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I saw your post on the Forums of HP Support. If I understand your message that you have a problem with the wireless Internet is intermittent.

  Do you by chance have Bluetooth? Is it on?

  I found some material that you can use to troubleshoot wireless problems you encounter.

  The first document that I found for you is called using Automated Troubleshooting (Windows 10: 8). This document describes how to use the troubleshooting tools automated in Windows. These tools use a combination of installed applications and online detect and resolve many computer problems, such as problems with networking, system performance and hardware devices. Although automated troubleshooting cannot find and fix all the problems, it is a useful tool which can often save you time and effort.

  The second document, I found for you is called troubleshooting wireless network and Internet (Windows 8). The steps described in this document provide the tools that were found to be useful in solving many problems that can occur with wireless network connections and the Internet.

  The reason why I asked you about Bluetooth technology is because I found a document called intermittent Wireless connection with Intel Centrino Wireless - N 2230 and Advanced - N 6235 Bluetooth Combo Wireless Modules (Microsoft Windows 8).

  Please follow these troubleshooting steps, re-post and let me know how everything went.

  Thank you!

  Have a great day!

• HP ENVY 15 3014 TX - NO SOUND AFTER FACTORY RESET, WON'T ALL THE DRIVERS INSTALLED.

  Hi my name is ali majaz, I recently did a reset on my phone, because there was a sort of Malware or viruses, which froze my device just after startup, so I did a factory reset with HP Recovery Manager, now the problem is that all things are restored, but even after installing the audio driver, the high defination IDT and Intel(r) Audio display the sound does not work, everything seems perfect, AUDIO troubleshooting gives no error, there is no mistake anywhere, even the speaker in the taskbar icon looks exactly as it should be, but when I play anything, there is no sound, games, but I hear nothing, I tried all the tricks in the book , but nothing works, I chose speakers & headphones that my default device, but nothing works, no sound at all, no system sounds, no sound in youtube, I don't know what to do, I tried to install all updates but nothing works, I doubt there is a sort of breach of registry in my machine , but after resetting it should have disappeared, SO if IT YOU PLEASE help me

  LOL OK SO A HAPPY FINALLY ENDING, I DO NOT KNOW HOW, COZ I TRIED SO MANY THINGS, BUT I JUST SWITCHED OFF THE MACHINE AND OPEN THE REAR HOOD, JUST DID A HARD RESET & BAM!  I TURNED ON AND THE SOUND WAS THERE, I DON'T KNOW HOW IT HAPPENED, MYA BE THERE WAS A BAD PROFILE CONNECTS AUDIO SERVICES SO I CHANGED IT BEFORE CLOSING DOWN, WITH NO HOPE IT WILL FIX IT, BUT I GUESS THAT IT IS WHAT SETS THE SOUND, NEVER LESS... IT WORKED... I'M SO HAPPY

• Cisco 7931 G do not start after factory reset

  Hello world

  So, I came across a problem that I hit an absolute impasse. I will list it first, then I will follow it with various methods, I tried to solve it.

  The phone in question is a 7931G, I can't tell you what software to boot, he's trying to boot from because it does not go far enough in the boot, treat for me to say. I did the factory reset as recommended by the documentation: give power to the phone (in my case through PoE on a UC540), press and hold the ' # ' until the side buttons are flashing turn upward. At this point, press the 1-2-3-4-5-6-7-8-9-*-0-# keys and wait until the course ends. The UC540 was active DHCP, all of the latest software on it (Sogiciel 8.6) and tftp-server was operational as well.

  What's happening: the phone starts the boot process and go to the screen that says "Update"... "and then, quickly, it flashes on the screen that she asked ' term31.default.loads... 0% "and then it starts to boot (Cisco logo appears)." On the bottom left where it usually shows a box with a check mark, it now shows a full circle in a slightly larger circle. He sat at the splash screen for about 2 minutes, stop and try to move on once more.

  I do not know what boot image he used before the factory reset, but this time around his supposed to pull the image of "SCCP31.9 - 1 - 1SR1S.loads. I read in a separate thread support the first 7931 must be upgraded to "SCCP31.8 - 5-4 S .loads" before he can start from 9.x software. So I tftp had the entire folder 7931 Sogiciel 8.2 UC540 to the UC540. I created the entries of the tftp server and alias and set the 7931 load newly downloaded software. Nothing. (The newly downloaded had the corresponding term31.default.loads of the file that was pointed toward the 8.5.4 files).

  I rolled back the UC540 everything back to 8.2 Sogiciel, with all the default configurations. Connected to an another phone 7931 (currently logged in as my personal and registered phone CUCM), than the phone registered car very well. I assigned it lines, performed test calls and all of the features worked as expected. 7931 issues, however, remained with the same problems.

  I tried to connect the problematic 7931 to CUCM of office, but the problem has prevailed without worrying what port I used.

  Any ideas or suggestions would be greatly appreciated. My goal here is to get the phone to properly initialize and eventually to register with the UC540.

  Thank you

  Andrei.

  EDIT: addition of debugs for tftp

  001095: 2 August 22:19:45.928: % LINK-3-UPDOWN: Interface FastEthernet0/1/1, changed State to

  001096: 2 August 22:19:46.928: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1/1, changed State to

  001097: 2 August 22:19:52.400: TFTP: application server port 49152, socket_id 0 87903524 process 160 x

  001098: 2 August 22:19:52.400: TFTP: read the 10.1.1.11 host demand (49152) via BVI100

  001099: 2 August 22:19:52.400: TFTP: looking for term31.default.loads

  001100: 2 August 22:19:52.400: TFTP: open flash:/phones/7931/term31.default.loads, fd 3, size 655 to process 160

  001101: 2 August 22:19:52.404: TFTP: sending of block 1 (retry 0), socket_id 0 x 87903524

  001102: 2 August 22:19:52.404: TFTP: ACK received for block 1, socket_id 0 x 87903524

  001103: 2 August 22:19:52.408: TFTP: sending of block 2 (retry 0), socket_id 0 x 87903524

  001104: 2 August 22:19:52.408: TFTP: ACK received for block 2, socket_id 0 x 87903524

  001105: 2 August 22:19:52.408: TFTP: finished flash:/phones/7931/term31.default.loads, 00:00:00 time process 160

  001106: 2 August 22:19:53.040: TFTP: application server port 49153, socket_id 0x86A5CB70 process 160

  001107: 2 August 22:19:53.040: TFTP: read the 10.1.1.11 host demand (49153) via BVI100

  001108: 2 August 22:19:53.040: TFTP: looking for term31.default.loads

  001109: 2 August 22:19:53.040: TFTP: open flash:/phones/7931/term31.default.loads, fd 3, size 655 to process 160

  001110: 2 August 22:19:53.040: TFTP: sending of block 1 (retry 0), socket_id 0x86A5CB70

  001111: 2 August 22:19:53.044: TFTP: ACK received for block 1, socket_id 0x86A5CB70

  001112: 2 August 22:19:53.044: TFTP: sending of block 2 (retry 0), socket_id 0x86A5CB70

  001113: 2 August 22:19:53.044: TFTP: ACK received for block 2, socket_id 0x86A5CB70

  001114: 2 August 22:19:53.048: TFTP: finished flash:/phones/7931/term31.default.loads, 00:00:00 time process 160

  001115: 2 August 22:22:01.788: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1/1, changed state down

  Try to restore to 8.5.2 or 8.4.4.

• Problems with factory reset on a Packard Bell

  Hi cox.haley1,

  After a Microsoft update Tuesday May 13 laptop Packard Bell Easynote TK85-GN-051UK of my granddaughter had a huge problem with the start-up that could only be ordered with a Factory Reset. Finally I had all this work and re-installed all software programs. Several days later, after update of Microsoft more, another problem arose that could only be fixed again with a Factory Reset, so I had some things to begin to repair, but it got stuck in the Installation of the software... Install Office 2010...33/45

  18hrs. later he was still stuck there.

  I sent to Packard Bell for re-installing operating system Windows 7 DVD & utilities drivers & Applications DVD... Incl. postage. £37.

  They have not worked as once more stuck in the same place.

  Packard Bell is a Dutch manufacturer and a subsidiary of Acer will help so I don't need to waste money on recovery discs.

  Can anyone suggest something to help please?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-cannot-complete-installation-in-safe-mode/5e913a56-B29B-4386-A462-20e1991a1edc#LastReply

  Thank you. All sorted now. There is a corruption of Microsoft Office files. Formatting of hard disk. Re-installed my Windows 7, etc and then all software, updates everything and now all is well again.

• Slow start even after factory reset

  After significant problems, mainly increasing the response slow time, which no longer responding, slow start, not being not able to uninstall the software and do not restore to any point windows recovery, I performed a factory reset.  I was running Kaspersky, Eset and Malwarebytes - I think that this is the final fall of the computer, but it has never been declared malware that has not been set.

  The problem is, even after the factory reset with NO other programs installed, I'll still have a slow start.  This should not be the case, right?

  I don't know what information you need to help me understand this.

  I am running Windows 7 Home Premium 64 - bit OS

  Dell XPS

  8 GB RAM

  2.1GHZ processor

  Do I need to take for professional diagnosis?

  Hello

  Thanks for choosing Microsoft Community

  Download HD Tune Pro from here and install and test the HARD drive

  If the test result will be put into custody, Contact Dell for HDD replace. I hope that the HARD drive has gone bad