Problem hard drive of the property

Similar Questions

• What is the largest hard drive or the RAID supported by El Capitan and Yosemite?

  What is the largest hard drive or the RAID supported by El Capitan and Yosemite?  Also, WHERE can I find this specification?  Drobo claims that 16 TB is the largest external RAID supported and I do not.

  FYI............ 2 UPDATES since I posted this question:

  "1. Drobo has updated their FIRMWARE to allow now to 'beyond' 64 power to RAID".  Thus, their original 16 TB limit has now been replaced by their new limit of 64 to.  Also note that when you use a Drobo, Apple Mac OS does correctly shows space 'Drive' and the 'free space', if the Drobo 16TB exceeds the size; but the Application DashBoard of Drobo displays the correct numbers.  For example, my Drobo 5 d contains 5, 8 TB disks, for a total size beyond 40 to RAID (theoretically, since most of us should know, now, that the ACTUAL SIZE IS SLIGHTLY SMALLER than THE THEORETICAL SIZE).  AVAILABLE FOR USE ACTUAL SIZE IS ONLY 28.9 TB.  Thus, 40-28, 9 = 11.1 TB gets used in place for the PROTECTION of RAID beyond and the difference between REAL SPACE and SPACE THEORY.  It IS NORMAL because any RAID 5 device always uses about 1 size of hard drive for its Protection.  So, knowing this, the DeskTop icon showing 28.9 TB disk space and free space as everything that is not yet used.  However, instead, the Mac OS shows 70,37 TB disk space and free space like 68,37 TB, which are both incorrect.  Although I'd love it if Mac OS has been magically increase my disk space, in fact, these two numbers are false.  Drobo knows this, and Apple has not, in my discussions with both.  So I hope, between the two companies, that this problem can be corrected.

  2. after many hours on the phone with Apple Support, through no less than 6 people including 2 senior advisers, NONE OF THEM COULD ANSWER MY QUESTION ON CE WHO IS MAXIMUM ALLOWED HARD DRIVE or RAID SPACE AUTHORIZED BY Yosemite and El Capitan.  For me, THIS IMPORTANT FACT SHOULD SIMPLY BE LISTED IN THE OS SPECIFICATION TECHNIQUE, it's quick and easy to read on the Support Site.  But Apple is the new bureaucracy, they are, I don't see what is happening any time soon.  So, be aware that, for now, HE IS No. LIMIT ON SIZE, as an Apple adviser said; but could not confirm in writing; and, IT IS AN INCORRECT DISPLAY SIZE AND FREE SPACE, if your drive is greater than an unknown 16 + TB in size.  Note that I have 3 other RAIDs that are properly in place showing that 9 TB, TB 12 and 18 to size; but I do not know how the SIZE IS IMPORTANT to ensure that the operating system display it correctly, except for my Drobo TB 40.  So, the bottom line, somewhere between to 18 and 40 to is where he goes wrong, in its display of sizes.

• Tecra M10 - 17U use second HARD drive in the Bay of ODD

  Hello

  I try one of this popular box that allows me to put a second hard drive in the Bay optical slot, I use a Sata to Sata adapter, so there is not really an adapter and more properly connect:

  [http://www.akasa.co.uk/update.php?tpl=product/product.detail.tpl&no=181&type=Enclosures&type_sub = 2.5%20Enclosure&model=AK-OA2SSA-BK]

  My problem is with the BIOS Toshiba waiting for a STRANGE device in this Sata port and cams out with a "CD" error, disable the Sata port.

  I have a workaround, if I start the PC, BIOS after with what this either in the Bay of the STRANGE, after Windows starts, I have insert the second HARD drive in the Bay of ODD, go to "Windows Device Manager" a 'check for changes on the hardware"and voila, the second HDD works fine , for me, it shows a limitation in the BIOS.

  Y at - it assistance, a Beta BIOS or something else, I have the latest BIOS 3.00 for this machine installed.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39412

  It seems that Tecra M10 does not support a select bay that would allow you to use a 2nd HDD rather than the ODD.
  As far as I know select bay is compatible with the Tecra M1, M2, M3, M4, M5, S1, S2

• Portege 3500 didn't detect the HARD drive in the BIOS

  Hi forum,

  I go out the HARD drive, when I stick to the rear; the BIOS didn't detect the HARD drive.
  How can I configure the HARD drive in the BIOS? The discs i/o isn't editable t option.

  I need urgent help...

  Thank you

  Try to access the BIOS and set the defaults. Don t forget to save the changes. ;)

  A friend of mine had a similar problem and the BIOS default settings has been the key.

  So check it out

• What HARD drive is the right one for Qosmio G30

  Hello world

  I have a Qosmio G30-161. The recovery discs are interrupted by a blue screen and windows cannot be installed!
  I tried to install a retail windows xp but does not recognize the hard drive!

  I'm almost convinced that the problem in the hard drive - computer laptop has2 - 60G each!

  The question is: what is the good hard drive that will fit in the laptop!

  In the specifications, S.M.A.R.T have been written!

  What does this mean?

  Hello

  You can remove hard disks and order the same. On the HARD drive you can find the purchase order number.
  For example, it can be Toshiba HDD2D33BZK01.

  Of course, you can also use with a higher capacity HARD drive.
  The question is: what you want to do exactly?

• My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  Question

  I have another type of problem with Firefox

  Description

  My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  This has happened

  Each time Firefox opened

  Only a few weeks ago, (tried everything)

  Troubleshooting information

  ?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)

  Plugins installed

  • -Adobe PDF plugin for Firefox and Netscape
  • Default plugin
  • Shockwave Flash 10.0 r45
  • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
  • Java plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
  • Npdsplay dll
  • DRM Netscape Plugin store
  • DRM Netscape Object network

  Read about virtual memory here: http://www.ehow.com/windows-xp-virtual-memory/

• HP Pavilion p6290d: change to smaller capacity desktop hard drive using the recovery disks

  Currently my hard drive (750 GB) is having a problem. I have a spare hard drive (500 GB), I can replace the 750Go with the 500 GB hard drive using the recovery disks that I created when I got the pc?

  Hello:

  All I can say is that you have nothing to lose to give a try.

  500 GB could be sufficient to allow the recovery discs, you did to work.

• W510: How do I access my data from a failed hard drive after the failure of the motherboard

  I made a mistake and has paid for major .

  This error pouring a drink sweet on my laptop. I know, I know, my keyboard can and protect against damage caused by the spill, but it was a drink together. In any case, I panicked and shut down the system and it has upset and removed the keyboard. And be the impatient person that I am, I made what was probably the ultimate error. I do not give everything save a sufficient amount of time to dry and I tried to boot the system. There is my computer. Or at least I think.

  Symptoms: It began at the start, kept a beep, sometime just close and will start.

  In any case, I guess that my laptop went kaput. Now to the point of this thread. I had not been a recent backup and can't remember when the last backup was actually made. Assuming that my hard drive is ok, I want to get all my data, so I saw several options:

  -Send the system to a data recovery service where I will not pay less than $300, but probably 2 to 3 times what

  -buy an equivalent model laptop and put the HARD drive in there

  -by an external SATA hard drive enclosure and mount it via USB on another computer

  I bought a box external and assembled this evening. I had read about the data access of difficulty with a system non-Lenovo because of encryption of the data. I proved that by linking it to my work (a Dell) laptop and I couldn't access my data directories. If I have access to an another Lenovo Thinkpad, I'll be able to access the data if connected via USB? I had read that I can access the contents of disc hard if it is connected to an another Thinkpad, but I knew not that if it means that I have it connected via SATA connection or if there is work through the USB port.

  I'll appreciate any suggestions for accessing my data.

  Best regards!

  All,

  Thanks for the suggestions.

  I was able to recover my computer and all data on it.

  Just to describe what I have done, here are the details.

  Because of my concern about a failure of the motherboard, I bought a used/given new keyboard and an external SATA drive enclosure. I was not able to properly take possession of the car from my other laptop, but I was able to access the data in Mode without failure. With my data, I plugged the hard drive and the new keyboard in and started without problem.

  Thanks again,

  brent86

• Add hard drive to the media center m7160n

  I added a western digital 500 GB hard drive in my hp media center m7160, no problem physically. Dosen't os find the new disk, while managing the set - up and device see. the device manager says that it works correctly, but that it was not initalized. question: How can I initialize it? Thanks a lot, well being, peace.                       DP

  Hello

  You may need to format the new HARD drive - try the following.

  If you are running Windows XP, see the guide on the following link.

  http://www.simplyguides.NET/guides/prepare_second_hdd/prepare_second_hdd1.shtml

  For Windows Vista, Windows 7 or Windows 8, follow these steps.

  Hold down the Windows key and press R.  In the run box, type compmgmt.msc , and then press ENTER.  Click disk management in the left pane and let readers load upward.  Right-click on your new HARD drive and select Format to start the wizard.  Windows assigns a Volume Label, so if you're happy with it, just leave the default.  File system is NTFS.  Allocation unit size must be left by default.  Select the option to perform a quick format if it is not already done.  Leave all the other default settings, and then click Ok, and then Ok to start the process.

  Once this done, your new HARD disk should now appear when you look under the computer.

  Kind regards

  DP - K

• Mini 110 is not to find the hard drive in the bios

  I fix this hp mini 110 1025dx for a friend model...

  I can't find the hard drive in the bios... after removing the HD (seagate 160 GB), I could not mount the drive, with windows or Linux... Re-installed the HD and the bios still cannot find HD help... Please...

  Thanks, in advance

  Hello @quickcarl,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I stumbled upon your post on the issue of BIOS and wanted to help!

  Have you tried to restore, or update the BIOS?  Try to review the following document and let me know how it goes: HP Notebook PC - BIOS recovery

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• To replace the DVD drive with the second HARD drive on the Probook 6570 b as for the BIOS setting

  After you replace CD/DVD player with HARD drive in the Bay of correspondence, I had a problem with the BIOS. After starting, I received a message 'there is not a boot manager' and CTRL + ALT + DELETE. So is that posible F9 and start to use Option manually hard. Please tell me what I should do to fix this problem.

  Thanks for your advice. I remember what I had to do in the BIOS. I had to choose the Boot Option and excludes "Boot from Bay upgrade". That's all. Of course subsequently followed "save all".

  in respect

  Military

• CD drive does not open on the hard drive of the computer.

  Original title: on my hard drive DimensionE521 the CD-Rom drive does not open.  He starts to and then stops. The computer says it's OK? Help?

  I had this problem and another time after playing with him for days, all of a sudden it just opened.  There is nothing in the drive - I'm sure of.  Everyone has to experience this problem.

  Hello Nannytosix,

  If you look very close to the door of the CD player, you will probably see a small hole somewhere around him.

  What you need to do is unfold a paper clip and push it in the hole and it should open the CD drive manually.

  I encourage you to consult the manual to check this.

  Best regards

  Matthew_Ha

• I am trying to install Windows 7 on my hard drive, but the installer tells me that I need the driver "Promise Technology Inc. Ultra IDE Controller".

  I'm trying to install Windows 7 on a (40.1 GB) partition on my hard drive, but the installer tells me that I need the driver (Promise Technology Inc. Ultra IDE Controller.  I searched the Internet and tried several, but no results.  Can someone point me in the right direction.  I have a box to open with Technical Support, but not a lot of help out there.

  Thanks in advance

  Joe Franklin

  original title: installation of Windows 7

  Hey Joe,

  I suggest that you visit the gigabyte website for your region (and/or the site global http://www.gigabyte.com/?f=g ) and check your motherboard for compatibility with Windows 7.

  The problem you are experiencing would imply that Windows 7 has no native driver support for your disk controller, so if Gigabyte don't have drivers that you are locked unless you buy a discreet disk controller that is compatible Windows 7.

  Please mark this as useful or response if applicable.

  On the other hand, you have this posted in a forum of Windows XP when it is really a problem of Windows 7.

  Tricky

• Get several errors in the hard drive and the slowness of the system XP

  COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

  * original title - mistakes, mistakes, mistakes and Everwear *.

  COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

  Please be specific on what you mean by "far from many errors on the hard drive."  What kind of mistakes? Do you mean the drive read errors? Please quote the error message you get exact, verbatim.

  How many mistakes is "too much"? How many times they do they happen? They occur only when doing certain things or anything?

  If you really get a lot of the drive read errors, the drive is defective and must be replaced.

  But if you're talking about freezing, slow, etc. This is another question entirely, and I wouldn't call it 'errors on the hard drive. The little info you provided the mind, it is difficult to know what this problem is, but one of the things these days plussusceptibles is malware infection. What antivirus do you run (they are far from being just as good, and some of the most popular are among the worst). Do you also run an anti-spyware program? If not, it's * very * likelythat you are infected. I recommend that you download and run the free MalwareBytes AntiMalware to http://www. Malwarebytes.org/products/malwarebytes_free

• Installed new HARD drive with the new installation of XP, old HDD ShowAs saw as the active partition, how to change this?

  I installed a new HARD drive with a new installation of Windows XP Edition family. I want to keep the old HDD and reformat the drive, but I can't because the second HDD is listed as active in the management of the computer. Why? It's not the drive that contains the operating system (Windows XP) that is initialized from.  I put the BIOS such that the new HARD drive is the boot drive. The old HDD has Windows XP on it, but isn't the startup disk. I just don't understand.
  If only the new HARD drive is installed, the computer management doesn't show that it or any other of its partitions are the active partition (C drive is listed as the system partition, of course).

  How can I get an active partition and no active partition when the new HARD drive is installed on a HARD drive that is not the boot drive, when I have two hard drives installed?

  In case it is necessary, the new HARD drive is a SATA and the old HARD drive is IDE with the cavaliers as a slave.

  The system partition is the Active partition. The system volume contains the system files needed to start Windows, Windows XP, these system files are:

  NTLDR
  Boot.ini
  NTDETECT.COM
  Ntbootdd.sys (present/used only with older SCSI controllers)

  Windows files are not necessarily on the system volume, they can reside on another volume, when on a different volume this volume holding Windows files is called the boot volume.

  When you install Windows on a computer, playing a mixture of IDE and SATA setup discs tends to favor with IDE drives on SATA drives and tends to use the IDE drive to house the system partition, (even if Windows is installed on a different drive).

  Running the command SYSTEM SET at a command prompt may shed some light on the problem...

  John