W8 dualboot PRO con preinstallato W7

Similar Questions

• test programs of adobe creative suite in e mac pro con mac os 10.6.8

  Quiero test programs of adobe creative suite in e mac con pro mac os 10.6.8 pero me not of as no puedo descargarlo porque sus applications no aceptan este operating system.

  None version? Neither the CS6, I have understood that the CC version primera también era compatible. Where is can find los enlaces a estas versiones luxury?

  You can download cs6 products

  Download the CS6 products

  I guess some CC version is also compatible with mac os 10.6.8

  You can install Adobe Application Manager and check once, Adobe Application Manager will display all compatible versions

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager: thank you

• Dell Precision 490 - pros & cons?

  Hello

  Please this shy rest pc to sub-to of individual hard drives? I know you can run 3 discs in this desktop computer, but the original specifications list combined up to 1.5 TB of storage?

  Are all these 490 s potentially 32 GB memory pc s Please?

  Thank you.

  Hello

  Excuse my delay as you can well be upgraded to a whole new system now. :/

  You would need a cart additional, different from the other two.
  P/N: 0JH670

  It is mounted in the secondary optical Bay. :)

  Dan.  :)

• Windows Mail or courier Adobe pros / cons?

  With PSE 8 photo sharing by email mail attachment or photo requires a selection (via Organizer > edit > Preferences > sharing) of Adobe or Windows Mail e-mail Service. What are the advantages and disadvantages to make that choice? Question side: is equivalent to Windows Live Mail, Windows Mail?

  Hello

  Here's a tech note from Adobe on sharing by e-mail using PSE 7 and 8 of PSE on Win7 http://kb2.adobe.com/cps/848/cpsid_84866.html

  Thank you

• The MacBook MacBook Pro vs the 2015 2012 Air

  I'm currently looking in laptops refurbished Mac as a device to program in XCode on and use it as a laptop school.

  My options seem to be the 2012 MacBook Pro vs. MacBook Air 2015. While my main focus will be programming, I need my computer to be able to handle other tasks. My complaint with the laptops has always been the General slowness are associated, when they become easily outdated. In the MacBook Air, much higher transfer speeds of flash memory should help, but the big difference of GHz between the two processors will be a problem?

  In the 2012 MacBook Pro, it runs at 2.5 GHz with a Turbo Boost to 3.1 GHz.

  In 2015 MacBook Air, it runs at a meager 1 .6GHz, but the Turbo Boost can reach up to 2.7 GHz.

  Big Turbo Boost of the MacBook Air, it seems competitive, but it will never really reach this clock speed? I've never owned a Mac for myself, and while the Turbo Boost looks impressive on paper, I do not understand if Turbo Boost is effective when it is actually implemented or not.

  Unfortunately, I'm used to my 4.0 GHz custom PC, so it is difficult for me to understand the magnitude of these small clock speeds and Turbo Boost.

  All opinions welcome, thank you for your thoughts!

  Hi milehigh3r

  In this article MBP = MacBook Pro and MBA = MacBook Air the MBP specific I compare the MBA with is Late 2012 15"

  Two of these laptops have there for and against.  I'm assuming that you look the MBP 15 "and 13" MBA

  In the MBP i7 would also go more high as you say that its Turbo clock is 3.1 GHz which means that it is the fastest frequency, he's going to go.

  Pros of the MBP (MacBook Pro)

  Retina display (Macbook air is not equipped with a Retina display)

  Can use up to 16 GB of Ram

  There are also more ports on the MBP

  All CPUS MBP is i7 which means you would get the benefit of technology hyper threading which creates a 4 additional virtual cores.  What will make it a 8 Core CPU.

  the MBA would not have this functionality if you upgrade the $130 extra for the i7 (Note: this i7 in the MBA is only a Dual Core)

  The MBA Pros / Cons

  Latest generation ports (Thunderbolt 2 (Thunderbolt 1 is on the MBP))

  You cannot install any OS prior to OS X 10.11 El Capitan

  To conclude I totally recommend that you go for the MBP because you have found the two nuclei and i7 in standard, you can also get much better display.  Also all Apple products Refurbished come with new batteries (I would say that you go to a class A which means better conditions).  Try to get a SSD if possible as they will make it lot faster on the start menu to the top of the OS and applications.

  Need anything better explaining it, or have any questions feel free to answer me.

• Pro advantages and disadvantages between Mag + and DPS

  What are some Pro & Con between Mag + and Adobe DPS? Both have the same characteristics, is a more easy to use against each other?

  There is a relatively long previous post on this topic at http://forums.adobe.com/message/5753173#5753173. See for more information.

  Neil

• I have more sites windowed

  When I go to a site, the widow that separate things have disappeared, it's just a long page of articles, I checked my updates and he said microsoft.net framework product assistant is no longer supported is that which was to keep my frames separated on the sites? Can you please help and tell me what should I do to recover my frames on websites

  Thank you

  Most sites use no frames more. I did not go to a site with articles in frames separated for years. I found some information on the .net Framework Assistant. Apparently, it's for making so it is easy for Web sites to install software on PC, it does not sound related. Some info about it:

  • http://www.annoyances.org/exec/show/article08-600

  Frames are not considered desirable, if not more sites with frames, is not too surprising. Some info about the frameworks:

  • http://www.mediacollege.com/Internet/HTML/frames/pros-cons.html

• Unable to upgrade to Yosemite 10.10.5

  Currently I have OS X 10.9.5 and tried the update to OS X Yosemite 10.10.5 but after starting the upgrade process, I get a warning message: "this update requires OS X version 10.10." I looked to 10.10, but nothing helped. Any suggestion? I don't want to upgrade to El Capitan, I prefer Yosemite because of all the comments, pro & con, I've seen. Any suggestions would be greatly appreciated.

  Thank you!

  If you have previously obtained Yosemite from the Mac App Store, open a session in there with the same Apple ID and click the purchases tab. If this is not the case, go to a physical store of Apple and ask.

  (139732)

• Palm desktop version & clarification driver

  Hello

  I have a unlocked version of Palm Treo 680 not through any mobile service provider (that I just love, use 7 years now! and will continue to use it until it dies - if any company sells this device once again, I will buy it again!)  It's good I think it is even though I have an iphone and android also phone that are more for the consumption of information & media. Applications of PIM 680's Treo and taking notes, the keyboard have no parallel).

  With many changes in the PC world, I intend to update my PC but it takes to only get one that can run Palm Desktop. I've been through a number of messages in the forum and am a bit confused.  There are some different Palm Desktop version (Office 6 and 4.2 desktop and desktop 4.1.4 and I remember reading this forum for a long time that return this worm 4.2 is better than 6 worm) and different drivers (32 bit vs 64 bit those provided by Aceeca). In addition, I read in the download page of office of Palm Palm Desktop is not compatible with computers of several base units, IE, I assume that it refers to dual-core, quad-core including the basic series processors and new processors Atom Baytrail.

  If you would be grateful if we could fill the table below next to each type of OS, which is the version of office and keep as a reference for everyone so that when upgrading from their computers, they can have that in mind:

  Bits processor Palm pilot Desktop operating system

  --------------------         ----                -----------                              ----------------                         --------

  Core Windows XP 32

  Windows XP 32 multi-hearts

  Windows XP 64 kernel

  Windows XP 64 multi-hearts

  Core Vista 32

  Vista 32 multi-hearts

  Core Vista 64

  Vista 64 multi-hearts

  Win 7 32 core

  Win 7 32 multi-hearts

  Win 7 64 core

  Win 7 64 multi-hearts

  Win 32 8 core

  Win 32 8 multi-hearts

  Win 64 8 core

  Win 8 64 multi-hearts

  I imagine that the different flavors of each operating system (e.g., home, premium etc.) have no importance have not created separate for them lines.  If they import, please add.

  Finally, I believe that, in many cases, 2 or 3 versions of Palm Desktop can run (IE ver 4.2, 4.1.4 6 Worm worm), it would be good if below, include just the advantages and disadvantages of each:

  Pros                                        Cons

  ------                                       ------

  Palm Desktop ver 6

  Palm Desktop version 4.2

  Palm Desktop version 4.1.4

  Thanks in advance to the experts, and I hope this info can be useful to many people now and in the future

  Concerning

  With the advent of Vista, quick setup has stopped working.  That's why Palm hired a company to write a new version of Palm Desktop which is the option.

  Thus, Palm Desktop 6.2.2 was born.

  It has its share of bugs so.  Less customizable to 4.x, no Docs to go play back and tends to erase data if cut you your computer with the program still running!

  There are solutions to application installation.  I remember a program called 'My install' you place on an SD card.  Any file that you want to install can be copied in the folder myinstall on the map (using any inexpensive card reader connected to your computer), and then you run the program.  It will install everything what it finds in the folder as would Quick Install.

  Some simple applications can only be copied to the card and run.

  WyreNut

• Test WLAN (Wireless Connectiviry)

  Maybe someone use the wireless (WLAN/BT test). It has link to she - http://www.ni.com/rf/test/.

  Idon't understand one thing. The test function as "access point" during a test of DUT?

  For example, CMW500 (R & S), MT8860C (Anritsu) work as 'access' point in a trial of DUT.

  Alternatively, NI test may some other test modes HAD?

  Concerning

  Ruslan.

  Ruslan63,

  Short answer:

  The NI WLAN toolkit does not act as an access point.  It offers measurement analysis and generation of waveform in accordance with IEEE 802.11 a/b/g/n/j/p/ac/ah/af. You should be able to put your device in test mode and have transmitting packets or packets of report he received successfully.

  Longer answer (drawing of some notes I made):

  Two main methods of testing are signaling or signaling reduced and non-signalisation.  NEITHER supports non-signalisation. There are pros & cons of each.  Here is a quick table showing some differences.

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  	Signalling	Non-Signalisation
  Test speed	slow (mins)	fast (dry)
  Cost test instrument	high	low
  Development time	low	high
  Sw/test protocol stack	Yes	NO.
  Required unit test mode	NO.	Yes

  If you test the stack of protocol/software of your device, or if you have no way to control your device in test mode, you should use signs and cannot benefit from the advantages of signalling No.

  Today, the trend is to use no signage for regression tests during the validation and design of the product and production test. Developers buy the modules and chipsets including sellers have already validated the software stack and Protocol.  As long the developer not to waste the chip/module, risk of product failure is very low. Thus, as designers to put the chip/modules in a circuit, they use no signs of regression tests to quickly validate the functionality of RF (that is, the physical layer RF) of the chip/module has not been compromised. A subset of this very fast, parametric test can often be used for production testing. Yet once, as long as the production process is not spoil the chip/module, so the risk of failure is low.

  WLAN Wireless products, were among the first to use the test of no signage.  Almost all WLAN vendors have a driver to control the device in test mode. The general categories of control are similar (e.g. Tx N packets of data type given the power), but orders are not normalized between suppliers. The interface for the control of test device mode varies also (UART, USB, SDIO).

  Bluetooth has a standard interface based on the COM port and the command set is the same between vendors (NICE!). For this reason, NEITHER has been able to create libraries of control device as part of its suite of tests of Bluetooth.

  Control of the cellular device varies such as WLAN, and shifted in no signal test, they are now driving difficult due to high volumes and $$$. In addition, a test of cell signalling can take 2 to 3 minutes vs 10-20 sec.  And if the call "injects" you don't have many options other than to rerun the test.  And the cost of test equipment can be > x 5.

  Navigation receivers can acquire a signal satellites simulated (for example using NI GPS Toolkit) and quickly provide support noise measurement on N satellite signals detected.  While this isn't really non-signalisation, it represents the time savings based on the same approach necessary to lock onto satellite signals 'good' protocol/software stack has already been validated and the risk is low.  Waiting for a satellite lock may take minutes, which for many is unacceptable, especially in production tests.

  As the cost of the chips drop, functionality increases, the cost of the test becomes a greater % of product. Businesses now demand not signalling test improved support to control costs.  In my opinion, any provider module/chip that don't offer not supported no signaling tests will lose market share.  This should be the first question a request before company decided on a module/chip provider because the test costs can sometimes outweigh the cost of the chip!

  I worked with a variety of businesses

  (A) who have more expensive 0 - 2 signalling testers for design/validation, while having much more (x 10) testers no signage for the production test and regression tests.

  (B) who produce high mix low volume products where they have that 1-2 testers signage for all tests.  In their case the advantage of not having to spend time developing the device control code is the largest economies, and their time to test/debit is not important.

  (C) who have no way to control test (for example the sealed device) device of fashion and have only the option of test signals.

  NEITHER focuses on the company to a types.

  I hope this clarify things.

• HP Officejet 8600 8600 vs. more - what are the main differences?

  We currently have a Canon Pixma MP-480 & he served us very well for about 4 years, but now I have to find a new.  I've been looking at HP as I understand it the price for consumption of ink is low etc..  Is currently seeking to HP Officejet Pro 8600, I didn't know that there was? versions of 8600 etc..  Can someone tell me what the main differences are (except the price of course).  I tried to read several of the reviews & the pros & cons were everywhere in the room.  Most seem quite happy & some certainly were not.  I have a laptop HP & am very happy with it.

  One of the concerns was that we could not send the scanner?  Our old printer, we choose e-mail via our computer on the screen to send something in our scanner?

  Another issue was auto 'duplex' etc.  I understand this means printing 2 sides, but beyond that, I wasn't sure what each of the 8600 printers did or did not.  Could someone explain this part of it, please.

  Thank you

  Hi Sue, take a look through the OJ Pro printer buying guide...

  http://h71036.WWW7.HP.com/HHO/us/en/EP/guides/OfficeJet-Pro-buying-guide.html

  If there is anything else I can help with let me know

  Ciara

• HP Envy 17 and Raid-0

  Hello

  I have an Envy 17-j005tx (Australian model) and hoped to Exchange internal 1 TB 5400 RPM HDD to the SSD and it places in a Bay Raid-0. I understand the pro/cons on different Raid configurations.

  I do all my work in virtual machines, with instant regular backed up over the network. So if they are not lacking, in theory downtime is limited to the time it takes to get new readers and the time to copy the snapshot in return.

  Q:  It is possible to configure the 17 want to start the Raid array-0? and wouldn't be a hardware or software raid?

  Manual stipulates that cell has 'Accelerometer (HP Mobile Data Protection System 3D) RAID 0/1 Support' - I'm looking for more information/confirmation before buying the hardware.

  Hello

  Your laptop supports the RAID, you follow the links of Intel and HP that is mentioned below.

  http://www.Intel.com/support/chipsets/IMSM/sb/CS-015988.htm

  http://WWW8.HP.com/us/en/HP-search/search-results.html?ajaxpage=1#/page=1&/cat=support%20%26%20Drivers&/cc=us&/lang=en&/Qt=RAID%200

• Best mp3player for gym use?

  Looking for a player for when I go to the gym. Any suggestions?

  bandabou wrote:
  The Clip? What are the pro / con s to use?

  Extremely small & compact. You can also consider the Sansa SlotMusic player. It's only $20 isn't huge loss if it gets stolen while you're in the shower or broken, but it only works on a card Micro SD or SDHC; no internal memory or edge. It has no display to break and works with an AAA battery. Cards 2 GB is a dime a dozen these days, and they hold enough music for several work-out sessions without repeating.

  Both the Clip and the SM player have clips so that they can be attached to your clothing, and weighing vitually nothing, they shouldn't come clipped not slamming into the weight machine.

• When using windows scan & fax tool I get: _ 'network processing timed out. Check the scanner settings & network"error

  I am running Vista ultimate on 64-bit computer with a Linksys WRT310n router in LAN mode. I also have a Canon MF4370dn printer that prints screen & documents ok. I can see the printer on the network.

  I'm mainly interested in the function of scan here.
  With the mf scanner set to scan mode of network (according to Canon), I opened the Windows scan & fax tool, I select the WIA Canon scangear printer/scanner/fax to network & I get a panel where you select dpi/jpeg/bmp etc. When I select the function preview or scan I get an error message that says "network timed out treatment. Check the settings of the scanner & network.

  I read a lot of sour comments on the analysis of the network of this machine. It's a shame, because it is a machine of great, fast & compact mono laser. I have disabled the firewall of the router, still no go. I also tried the rout USB with software to reinstall with network for others, printing & for my machine but italways deferred to the network on mine with the same error message.

  I also read where it analyzes only at 300 dpi... so with all these pros & cons I decided to get a good, dedicated, scan that will probably better results of the scanner anyway.

  Thank you for all the good sites & info you have provided.

  Newbie.

• E4200 v1, DMZ and PS3 game system

  I had a question regarding the use of the DMZ on the router for use with the Playstation 3 game system.  More like a probe for your reactions.  The pro, con and all the rest.  Last week (I think), I posted about problems streaming movies and TV shows through services such as Netflix, VUDU, etc..  I thought using the DMZ feature on my router to expose all the ports for the PS3.  I know I should set address static IP for the PS3 (not let automatically obtain an IP address, that is not a problem), but I wonder if someone has done this, what the results were, what the potential pitfalls are, etc.  I never heard talk of a PS3 being hacked with the exception of the Playstation Network being hacked last year, but which is a service for the PS3 to connect to, does not part of the PS3 itself.

  Anyway, just wanted to get some thoughts on this subject here and there.  I thought that if maybe it's a problem of open port, using DMZ could solve this question Lickety-split.  Constructive comments are always appreciated.  Thank you!

  BTW, as before, I have the latest firmware, the latest updates on the PS3 itself and the latest app updates that I can get to Netflix, VUDU, etc. on the systems themselves.

  The 1st thing you should consider is your modem. What is a simple modem or a modem/router. If it is a modem/router, then you must put the modem in full bridge mode and configure PPPoE on your router. Then what of the DMZ, as all ports will be opened then you will leave your router vulnerable to attacks, try port forwarding instead. Simply enter the ports for PS3 w / address static ip that you set on your PS3.