Problem HP Laserjet P1102w

Similar Questions

• Problems installing HP LaserJet P1102w

  Hi all!

  Can anyone help me please with this problem. I bought this printer HP laserjet P1102W is approximately 4 months. It was working fine until my service provider has changed the settings to my Lynksis modem + router. So I reset the settings for my modem and if it was configured (wireless). The modem worked fine, but he could not connect with my laser printer so I uninstalled it and it was reinstalled.

  Here's the problem:

  When installing using smart installation embedded in hardware (no CD), this password box continues to appear. Maybe I had entered a password for my printer before. Problem is that I have completely forgotten in this respect. This password thing is I can't install my printer properly. If I install it using configuration USB it works by USB not wireless. But I bought it for its wireless capability in the first place that's why I wanted that it functions as a wireless printer.

  Can someone help me please. How can I recover this password? Or better yet, if there is a way for an password is not needed?

  Thank you for your help.

  You can also join by my email: {deleted personal information}

  Primus

  ATLAST my problem is solved! I refer to the manual of the user for connection problems. I had to download the manual of a Wordpress blog. I wonder why he didn't come with the box as a paper or CD version. Anyway, problem solved!

  Wheeewww!

  -primus

• LaserJet P1102w: Router reboot printer wireless problem cures - why?

  Ive had this printer (P1102w LaserJet) for a year now. Sometimes its been very well, other times as recently happened constantly offline. Its driving me crazy.

  I just read online that can help to restart the router and the last two times, my printer went offline, restart the router has healed (power cycling of the printer, by running a utility that stops & starts the spooler - did any of these things).

  So my question is - why reboot the router to fix this? Both times I was surfing online with this same router, and I have not noticed any problem with this router. And secondly, is there a setting that I can change into my router so that it will not goof the printer wireless?

  
  HP LaserJet p1102w

  OK, I'm about ideas.  I suggest check the firmware, there is a version 20150114 which was released end of March 2015 available here.

  It can also help to go through all the steps described in the paper here.

  If none of these solves the problem I will ask one of the HP support officers rush in this thread, they may have some additional suggestions.

• Problem with the HP Laserjet p1102w printer

  Hello

  I have the problem that my printer HP LaserJet p1102w (wireless) still print on the same page, no matter what I send to print. Curretly I can't print at all because every time when I turn on the printer starts infinitely print the same page...  I tried to reinstall the drivers, but it did not help.

  How can I solve this problem? Can I do hard reset somehow?

  Thanks in advance for any help with this problem!

  You don't mention whether or not you have recently installed your printer on a network, but this is a HP document that answers your question, once the product is installed on a network of troubleshooting.  Please let me know if it helps.

  Product print permanently the same print job

  Tobindo

  A representative from HP

• LaserJet P1102w: HP LaserJet P1102w prints EXTREMELY slow by Wi - Fi

  I was struggling with this problem for a long time, but today it completely freaked me. I was ready to throw this piece of... printer!

  Problem is simple. When I try to print something wireless with graphics (jpeg or pictures images) to my iPhone, the iPad iOS 8.4 or the MacBook OS X 10.10 Yosemite, it takes forever! Document Word, PDF, preview or other programs - same result! I couldn't pring 9 pages today, after that 20 minutes, I gave up.

  What is going on. Let's say I'm on mac. Special print goes to the queue of the printer, as usual. After that, this task shows in the queue as 'connection to the printer', green light flashing on the printer, as usual. It takes a minute or two, it's this that unusual. After that, "printing page 1 of departure." This can take 1, 2, 3 minutes... forever! Then a page prints in fact (for 5-7 minutes at this stage brand) and it takes time even to print page two and so on, or (probably) it will spit the unfinished page (only two or three inches printed and the rest of the page is empty) and displays an error flashing light orange. UGH!

  I gave up on iPhone/iPad it long, since they can't see the print queue and it is the unpredictable result. You can wait 10 minutes for your document, and then leave and then just find the document printed when you no longer need (or half of the document).

  I don't have this problem when you print any text, emails, simple confirmation of safari pages and so on. Only when printing document with pdf graphics or heavy. I don't have this problem when you connect the printer via the USB port (discovered this today). Now what really bothers me, is the fact that I actually could print heavy machine PDF Windows without wireless problem (I had exact problem even print document from my mac). What is going on?!

  I googled this problem and found that I am not alone. I've updated all the software and firmware, I tried to reset everything - No. DICE! It's really very frustrating. I thought that this is because of the memory of the printer, but why it works perfectly via USB then?

  In any case, it is a cry from the heart. Help, please. The printer is good, but unusabe in certain situations.

  Hello @Ivan4!

  Welcome to the community of HP.

  I hope you have a pleasant experience here!

  I want to help you with slow printing that you encounter when you print images of your HP LaserJet P1102w wireless of your Apple devices.

  I thank very you much for the detailed description. Because the printer is able to print fine wireless windows machine, we know that the issue is not with the printer or the communication. The fact that none of the Apple devices are able to print wireless images without being really slow, leads me to believe maybe it's a problem with the AirPrint driver or the Hello protocol that your Apple devices use to communicate information.

  Image files are much larger, and much more data needs to be transmitted, so it is normal for them to take longer to print than a regular text document. However, if there is a marked difference in speed between the Windows computer and Apple devices, then the question is probably not just the files are larger.

  I want you to make sure that the printer is installed with the driver on your Mac. (Because there is no feature complete HP software available for Mac 10.10 operating system will often default to the AirPrint driver)

  1. Click on the Apple icon on your Menu bar.
  2. Select System Preferences.
  3. Choose Printers and Scanners.
  4. Select your printer and press the (-) button at the bottom of the list to remove.
  5. Select (+), and then click Add printers and Scanners. (NOTE: do not select the printer in the list of printers nearby as this will often use the AirPrint driver automatically)
  6. Select your printer (one that shows multifunction Hello under 'Type').
  7. At the bottom of the window under use: does say AirPrint? If so, click on the drop-down list , and you should see a specific driver for the printer. Click on Add.
  8. Try to print a picture once again and let me know the result.

  If it works to solve the problem, then I suggest downloading the HP ePrint app on your iPhone / iPad to print. It may be a problem of incompatibility between the AirPrint on your Apple devices and your router.

  I look forward to hear from you and work at a resolution of this problem.

  

• HP LaserJet P1102W: P1102W random print

  Hello

  I have a 2 HP LaserJet P1102w years and when I sent a document to print an error message appears on the computer saying that it was impossible to print. I thought nothing about it and continued and printed on another printer. A few minutes later my P1102W began to print the document that I had tried to send streaming (about 300 times)

  I tried to cancel printing, but it has not been recognized as a print job and the Cancel button on the printer just stopped printing for a few seconds. Finally, it stopped printing and started working normally.

  Unfortuately, I couldn't ask HP at the time that he was after 18:00 and in the United Kingdom, all the customer service had stopped by here and I am unable to contact now as the productwasnt under warranty for any reflection on what has happened and how to prevent it is welcome.

  Does anyone else have this problem?

  Hi @Brad14,

  I read your post and see that the printer prints over and over again the same document. I will definitely do my best to help you.

  I have provided a document to disable bidirectional support, which should solve this problem.

  Product always prints the same Print Job after it is installed on a network.

  If you're still having problems, clear the record of the spool and restart the print spooler.

  How to clear the current queue in Windows Vista & Windows 7.

  How is the printer connected? (USB / wireless)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• LaserJet P1102: Driver for LaserJet P1102w

  Need help for my LaserJet P1102w operate with Windows 10.

  Best regards / Tomas

  Hello

  Kindly click on the following link to install the printer driver for the printer.

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-P1102-Printer-series/4110394/model/4110306#Z7_3054ICK0KGTE30AQO5O3KA30R1

  I work for HP.

  Say 'Thank you' by clicking on the star of congratulations in the post helped you.

  Please indicate the position that solved your problem as "acceptable Solution".

• HP LaserJet P1102w: Help with printer install

  HP LaserJet P1102w chip installed on the new windows 7 PC as a USB device when I am logged in it.   How do I make a printer so I can set as the default printer?  On the control panel / devices and printers, she appears as a device, not a printer.

  Solved the problem.  Re-directed HP smart install and the drivers have been loaded.

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• LaserJet P1102w does not connect to WIFF

  This is a new printer right out of the box and he can't make it work wireless.  I followed the instructions to install the printer, but the HP Smart Install says its downloading the software, said over.  Is not further in order for me to set up the wireless part.  My computer does not have a CD, so I down loaded the disc and when I start it, it goes into a film on how to unpack the printer, etc., any wireless configuration.  I tried setting up this printer on another computer and get the same problem.

  Hey there @paxton2644!

  Thank you for posting back!

  I suggest all initially set the printer to the wireless settings and try again the wireless installation.

  To restore the default settings of the network:

  1. turn off the product.
  2. press in and hold the wireless and the Cancel button and then turn on the product.
  3 hold the keys down until all lights flash in unison, and then release the keys

  If you already have the software, you can check the configuration wireless in the HP folder.  I suggest to try the Wireless Configuration before you uninstall and reinstall.

  To access the Wireless Configuration:

  1. connect the device wireless to the computer via a USB cable.
  2. click on the Start button and then click on the programs or all programs.
  3. click on the HP menu item and then click the printers HP LaserJet Professional P1100 series
  menu item.
  4. click on the wireless settings menu item.
  5. follow the on-screen instructions to configure the product to print on a wireless network.

  Before installing the software for your printer, you must uninstall the old software.

  To uninstall the software HP click here: uninstalling the printer software

  To download the LaserJet P1102w software, click here: LaserJet P1102w drivers

  If you bought the printer less then a year ago, then it must always be within the 1 year warranty and you should not pay for support.  To make sure you got the right number of HP telephone support I can provide here.  Our technical support is 1-800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• HP LaserJet P1102w: No Office Depot compatible cartridge

  Install a my HP LaserJet P1102w printer Office Depot remanufactured laser toner cartridge. Now, I can't print from the HP Pavilion laptop. My wife can always print from his computer apple laptop, and I still can not print from my old Pavilion Slimline desktop, but cannot print from my most recent HP laptop. I just get "INCOMPATIBLE CARTRIDGE" warning. Do I need a driver of dumbed-down?

  Hi @SafetySteve ,

  I see that you are having problems printing since the departure of the toner with toner HP - no, but the other 2 computers are still able to print. I'd love to help you.

  I guess so that the error comes from a computer then and not the screen of the printer.

  You can try and uninstall and reinstall the printer software to see if it will solve the problem.

  You may need to obtain a genuine HP toner so he can be recognized correctly if the problem persists.

  Ink and toner cartridges.

  Good day!
  Thank you.

• "Printer Validation failed" on HP LaserJet p1102w

  When you use the software of HP ePrint on Windows 7 Pro x 64, I get the error 'Failure of Validation printer' when printing a pre-configured HP Laserjet p1102w printer wireless. It occurs after the selection of the printer 'HP ePrint' & clicking on print, then clicking the printer wireless found on the ePrint window. I am able to use the ePrint for Android & iOS app to print correctly on the same printer. I intend to use this printer to print wireless from several rooms of conference on different floors, so a USB conection is not an option. Does anyone know how to solve this problem, so I no longer receive this error of the ePrint Windows software?

  In addition, the printer has the latest version of the firmware 20130213. And I tried to remove the password from the printer, but it still produces the error.

  I understand now. The works of ePrint better if driver you need multiple computers to access a printer on a different network by turning on ePrint in the printer embedded web server, printing a page of information with a printer (request code) code and complete the implementation at www.hpconnected.com.  Otherwise, you need to install full feature software and drivers (the link is to the American version of Windows 7 64-bit) on each computer and make sure that each device is on the same network as the printer.

  I have included a link here with more information on how to set up ePrint.  Respectively, it seems that you do not want to use the ePrint feature and for this purpose, you will continue to have problems with the ePrint driver designed for this specific purpose.  If you have any other questions, I'm happy to help you.

• HP Laserjet P1102w: HP Laserjet P1102w not recognized in Windows 8.0; driver needed

  Trying to install HP Laserjet P1102w on Dell desktop running Windows 8.0. The installer always stops and says to connect the printer by USB, but it is already connected and turned on. Had to remove peripheral devices after he worked temporarily, but now I can't find the driver - have the disc. How to recognize the driver on disk file?

  Hi @artjourneyer,

  I see that you have problems get printer recognised and you will need to find the file on the CD for the printer. I will definitely do my best to help you.

  The file would be .inf from the CD.

  I would say to download and use the latest drivers for Windows 8. HP LaserJet Full Feature software and driver.

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. You may need to try another USB cable.

  Try and print a self-test on the printer hardware to see if it is a hardware problem. If the printer is not in a ready state, the computer does not recognize it. Printing a Configuration Page. Select the method two.

  This can occur when the printer is already recognized as the USB connection and windows does not yet detect. Remove the USB cable plugged in, remove the printer from the Device Manager.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with an exclamation yellow, storage device or an unknown device. Right click and uninstall the device.

  Then reconnect the USB cable and it must be detectable again.

  You set up the printer on the wireless network?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• LaserJet p1102w: how to access the interface web printer with new router

  I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

  Internet access works ok desktop and laptop (wireless).

  However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

  How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

  I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.

  
  HP LaserJet p1102w

  I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.

• LaserJet P1102w, why not install it via the USB port on a second system to dual boot Windows XP/Windows XP?

  A seriously paralyzed malware on my laptop Dell Inspiron 1318 running Windows XP Professional SP3 with 3 GB of memory. Some key files have been deleted, and I can't open all .lnk files. After some research, my solution was to start from a clean format. However, I have some programs on the old system that I really need and impossible to reinstall on a new system. So, I chose to install a new WinXP as a dual boot on a separate partition (I have also a third partition that I use for user files); keep the old system for when I really need.

  After installing the new WinXP, the detector material caused my LaserJet P1102W printer install pop up box. I was busy to install other drivers at the time so I canceled the installation of the printer later. When I came back to him, he went for the bulk of the fine saves but then abruptly stopped, saying: "the printer installation failed. On the HP site, I went through all the HP printer Diagnostics steps without good results.

  I really want to get this printer working on my new system. What can I do?

  No problem. Since you are the author of the post, you should see a black button with "Accept as Solution" next to the reply button. If you don't see it, make sure that you are connected and try again. If still can't get it, you can click the link inappropriate content report and ask the moderators to mark the solution for you. Hope that helps.