Problem in the module ReCaptcha.

Similar Questions

• Problem with the module "Automation" in WindowsAzure

  Top: Problems with the module used "Automation" service "WindowsAzure.

  Hello!

  I really need your help to decide my problem of "Azure Automation". My boss has set a task for the 'Automation' module allows you to make a backup of Virtual Machines.

  To understand my problem, I do the next:

  1. describe the situation of all;

  2. describe the problems that appear in this situation;

  3. my conclusions.

  In addition, I am attaching the necessary information: my PS-scripts (from Windows and the automation of azure), log (with my notes) and screenshots (images with my notes) see file .rar Add_info (annex).

  1 description any situation

  For our development projects, we have several Virtual Machines on service cloud "WindowsAzure. We need to make backups of discs with Virtual Machines each week. Earlier, for this task, I used Windows PowerShell on my computer and my PS-script (see Ann 0 - VM (backup) of the WPS_snapshot). I created a new storage 'backupstor' and containing 'snaps-drive '. When I run PS-script with my computer, I have backup of disks virtual Machin in the container "snaps-disk", without problem.

  Now I have a new task "automatically make the process of creating backup of Virtual Machines (VM snapshots). I tried to use automation module (overview). Can I change my PS script for the 'Automation' module and create folders (see Ann 1 - records (make backups of virtual machines) _Azure_Automation).

  I need to make a backup of Virtual Machine 'bosard' in the cloud 'cloudnet. "Bosard" on the disc size ~ approximately 90 000 000 000 bytes (total size of the default drive size 127 GB/136 367 309 312 bytes)

  2. description of the problems that appear in this situation

  My steps:

  1. I start files to make a backup of Virtual Machine disk (see annex 1 - files (make backups of virtual machines) _Azure_Automation))

  2. it starts successfully and generate the name of backup 1 (blob) - snapshot-bosard - osdisk_07.10.2014_07h00m39s.vhd (see image 1 - start copy backup 1 and annex 2 - log file copy process)

  3. the process of backup copy 1 (blob) will...

  Problem 1:

  4. the process of backup copy 1 (see Appendix 2 - process log file copy) automatically stops and complete to copy the part 1/3 bytes copied 28311552000only. Important: The size of my virtual machine disk ~ on 90 000 000 000 bytes.  (Maximum possible) of total capacity of the disk where the Virtual Machine is used - 136 367 309 312 (127 GB). (See picture 2 - stop backup copy 1)

  5. I have Virtual size 1 backup - 28311552000bytes, when the size of my VM - 90 000 000 000 / 136 367 309 312 bytes.

  Problem 2:

  6. after the termination of the process automatically makes copy backup 1, records (see annex 1 - files (make backups of virtual machines) _Azure_Automation) automatically start (see picture 2 - stop backup copy 1) and folders automatically create new snapshot Backup 2 - name - bosard - osdisk_07.10.2014_07h31m33s.vhd (see annex 2 - process log file copy, image 3 - stop the copy backup 1 & Begin copy backup 2 and 5 - backupStore_Azure (process)of image)

  7. I pressed "stop" and stopped the process of copy and folders (picture 4 - I stopped the process of creating backup 2 & records). And how result I had size Backup 1 and 2 = 0 bytes (see image 6 - backupStore_Azure (I order records))

  Note:

  1 problem 1: the process of backup of virtual machine does not complete and stops automatically.

  2 problem 2: the process of creating new second backup starts automatically. And as a result, we do not have the backup of virtual machine, when I use the 'Automation '.

  3. my conclusions

  I think that:

  1. my PS script for Automation (files) is not correctly. Then I need your help, how to fix this.

  2 may be the module "Automation" is not working correctly. And the module 'Automation' needs repairs and settings.

  In addition, I am attaching the necessary information (see the Add_info (annex) .rar file):

  Ann WPS_snapshot 0 - VM (backup)

  Ann 1 - records (make backups of virtual machines) _Azure_Automation

  Ann 2 - log file copy process

  image 1 - start the copy backup 1

  image 2 - stop copy backup 1

  image 3 - stop copy backup 1 & Begin copy backup 2

  4. I stopped the image create backup processes 2 & records

  image 5 - backupStore_Azure (process)

  image 6 - backupStore_Azure (I order records)

  Thank you

  Kind regards

  Mikhail

  Hello

  You can get the assisted support from the following link on this point:.

  http://azure.Microsoft.com/en-us/support/options/

• KB952287 is a problem with the module installer and will not install, error code 800706BE

  Hi, I have a laptop Dell Inspiron 1520 with Vista Home Premium. I'm having problems installing SP1 and have identified that one KB952287 that causes the problem. The update causes exactly the same problem. While installing the update, an error message appears that says "Module of Windows Installer has stopped working and needs to close", then the updater freezes and never completed the update. The update log provides the following information.
  
  Fix for Windows (KB952287-french)

  Installation date:? 03 /? 04 /? 2009 20:06

  Installation status: failed

  Error details: Code 800706BE

  Update type: Important

  Difficulty for KB952287

  More information:
  http://support.microsoft.com/?kbid=952287 .

  I've contacted Microsoft Support on this issue and they could not help but suggest to post here.

  Thanks in advance for any help.

  If you don't want to go in this direction, you should call dell and ask for a replacement recovery media.

  And maybe ask a copy directly from the operating system without any OEM software or all the changed settings. (a copy of the DVD retail)
  See you soon

  Today, it was a good day, I didn't have to use my AK.

• Strange problem with the module memory series Satellite Pro 4300

  I have a laptop Toshiba satellite pro 4300 series with 64 MB onboard + 64 MB Module and I want to upgrade my memory to 320 MB. I bought two ram of 128 MB each. I removed the 64 MB module and I put a 128 MB module into the slot (A) one, but I saw that the total memory is 128 MB again.

  I removed the module again and I put the second module in the connector (A), but I saw that the total memory is 128 MB again. After that, I put the two modules in my notebook (Slot A and slot B) but I see that the total memory is 192 MB. This means that it recognizes each module as 64 MB as opposed to 128 MB. Dose anyone know why this happens?
  And what do I do about it?

  Thank you.
  [email protected]

  Hello

  Well, I put t know why this happens. It seems that the 128 MB modules are 64 MB modules. I know that it of strange but I have only this explanation. You are 100% sure that both modules of memory 128 MB?
  In my opinion, you should check the bars of memory if they have 128 MB.

  Good bye

• Lightroom 5.0 on Windows 7 - problem in the Module Photo caption book

  Using Lightroom 5.0 on Windows 7, I produced a 76 page book in the book Module with multiple photos on most of the pages, but two photos showed not their captions and do not even print a PDF proof print run. I had the photo captions in the metadata, but subsequently entered the legend of the relevant picture via text custom from the left panel and also directly in the legend of unsuccessfully photo printing area. I changed the size of the picture, without success, but when I did an automatic photo cell fill, legend appeared in the photo, but disappeared when the sizing has been cut back. I've exhausted all the possibilities of help at this point.

  I use Lightroom 5 because I didn't upgrade while in the middle of this great exercise. As I have a PDF version on a USB key, now that I have almost completed the task, maybe upgrade to 5.7 could solve the problem, if it's a bug in 5.0. My intention is to have an impression through Blurb.

• Problems with the module supplier of personalized identification information and overview of VMware View Client working together

  I have a Horizon of VMware View client that connects me HVD Windows 7. So when I give view client Vmware Horizon my credentials, it auto logs me. I also created a custom credential provider that works on Windows 7 PC. When I install the custom in the HVD credentials provider, it works if I am already connected to HVD and I simulate CTRL + ALT + DELETE. Can I use my credential provider to "unlock" in. However, if I disconnect of HVD and try to connect using VMware Horizon View client to connect to Windows 7 of HVD, it gets stuck on the screen of the tile. I see the VMware SSO user tile but nothing happens when I click it. Then, I use my provider of customized credentials to connect. I expect to bypass my ISP credentials on the first connection and self as before.

  Anyone have any ideas?

  Thanks for your help.

  OK, I did some more troubleshooting and discovered that it was a problem with auto connection set to TRUE on my side of custom credentials provider (I pbAutoLogonWithDefault to TRUE). Since I still like it TRUE, I had originally set it to FALSE and then change for REAL once my credential provider was used.

  Thank you!

• Problem importing the Module knowledge

  Hello
  When exporting data from a relational table to another relational table (and the primary key of the target table is populated by sequence) I need to import "* IKM SQL for SQL Append * ' for the target. But I can't find such an option in the list of options import knowledge. What can I do? When I select IKM SQL for SQL command Append it shows fatal error. Help, please.
  NB:-these are my options
  IKM Access incremental update
  IKM DB2 400 incremental update
  IKM DB2 400 incremental update (CPYF)
  IKM DB2 400 Dimension to slow variation
  Incremental update of IKM DB2 UDB
  IKM DB2 UDB Dimension to slow variation
  IKM file for Teradata (TTU)
  Incremental update for IKM Informix
  IKM JDE world command Append
  Incremental update IKM MSSQL
  IKM MSSQL Dimension to slow variation
  IKM Netezza command Append
  Incremental update of the IKM Netezza
  IKM Netezza to the file (EXTERNAL TABLE)
  Incremental update of the IKM Oracle AW
  IKM Oracle BI to SQL add
  Incremental update of the IKM Oracle
  Incremental update IKM Oracle (FUSION)
  Incremental update IKM Oracle (PL-SQL)
  IKM Oracle Multi Table Insert
  IKM Oracle Dimension to slow variation
  IKM Oracle Spatial incremental update
  Control of Oracle for Oracle IKM Append (DBLINK)
  IKM SQL command Append
  IKM SQL command Append (BSE XREF)
  IKM SQL command Append (SOA XREF)
  IKM SQL incremental update
  IKM SQL incremental update (line by line)
  IKM SQL to the file Append
  IKM SQL for Hyperion Essbase (DATA)
  IKM SQL for Hyperion Essbase (METADATA)
  IKM SQL for Hyperion Financial Management Data
  IKM SQL for Hyperion Financial Management Dimension
  IKM SQL for Hyperion Planning
  Add IKM SQL to JMS
  Add IKM SQL XML JMS format
  IKM SQL for SQL command Append
  IKM SQL for SQL incremental update
  IKM SQL for Teradata (TTU)
  Add IKM SQL for control of Teradata
  Incremental update for IKM Sybase ASE
  IKM Sybase ASE Dimension to slow variation
  Incremental update for IKM Sybase IQ
  IKM Sybase IQ Dimension to slow variation
  IKM Teradata command Append
  Incremental update for IKM Teradata
  Statement of Teradata Multi IKM
  IKM Teradata Dimension to slow variation
  IKM Teradata to the file (TTU)
  Incremental update IKM TimesTen (FUSION)
  Adding the XML IKM control

  Instead of doing all the transformations in the staging. Make a transformation in the target. Until the expression editor, you can see run on the source, staging, target. Select on target for at least one column. See if it works.

  Example: sysdate must be running on the target.
  Thank you.

• Configure the module of firepower ASA IP address

  Hello

  today I tried to configure the IP address of the late ASA power module. But unfortunately I failed. The firewall is in the direction of the situation and also do have not any router on the LAN. So, I stop the management interface and configure the IP of firepower on the network server management. But unfortunately I can not ping the gateway IP address that is actually one of the interface of the firewall. It is the series x 5525 firewall. So this isn't a any interface dedicated to management of firepower. It would be nice to know where I made the mistake? I recharge and recovery of the module and I consider the State as always state of recovery. So my question is looking for there is a problem with the module itself?

  Module status

  SH module

  Model serial number of map mod
  ---- -------------------------------------------- ------------------ -----------
  0 ASA 5525 - X with SW, GE, 1 GE Mgmt, AC 8 data
  IPS unknown n/a
  cxsc unknown n/a
  SFR unknown n/a

  MAC mod Fw Sw Version Version Version Hw address range
  ---- --------------------------------- ------------ ------------ ---------------
  0 f  1.0                                                2.1(9)8      9.2(3)
  ips                                                         N/A          N/A
  cxsc                                                       N/A          N/A
  sfr                                                         N/A          N/A

  The Application name of the SSM status Version of the Application of SSM mod
  ---- ------------------------------ ---------------- --------------------------
  IPS unknown current Image number does not apply
  cxsc unknown No. current Image does not apply

  Data on the State of mod aircraft compatibility status
  ---- ------------------ --------------------- -------------
  0 to Sys does not apply
  IPS does not is not Applicable
  cxsc does not not Applicable
  SFR recover not Applicable

  Config firewall Interface

  #Interface IP-Address OK? Method State Protocol
  GigabitEthernet0/0 10.101.106.115 YES CONFIG upward upwards
  GigabitEthernet0/1 10.106.106.115 YES CONFIG upward upwards
  GigabitEthernet0/2 10.103.254.254 YES CONFIG upward upwards
  GigabitEthernet0/3 10.0.210.254 YES CONFIG upward upwards
  GigabitEthernet0/4 10.100.254.254 YES CONFIG upward upwards
  GigabitEthernet0/5 10.107.253.115 YES CONFIG upward upwards

  #interface GigabitEthernet0/1
  Speed 1000
  full duplex
  nameif Server
  security-level 70
  IP 10.106.106.115 255.255.0.0

  Fire power management configuration

  Host name: 1 Swiss francs
  Configuration Management Interface

  Configuration IPv4: static
  IP address: 10.106.251.253
  Network mask: 255.255.0.0
  Gateway: 10.106.106.115

  IPv6 configuration: Stateless autoconfiguration

  Configuration of DNS:
  Domain: XXX.local
  Search:
  XXX.local
  DNS server:
  10.101.251.2
  10.201.251.2

  Any help will be greatly appreciated.

  Thank you

  Sari

  Sari,

  Even if there is not a physical module services fire power management port, it uses Management0/0 port to connect to the module of SFR.  If you like on the same VLAN as your server VLAN on the SAA plug Management0/0 port on a switch that is sharing the network server VLAN and give the module SFR an IP address on the same subnet.

  Make sure that you remove the statement under interface Management0/0 nameif. Here is an example:

  interface Management0/0
  management only
  No nameif
  security-level 100
  no ip address

• The module page should include the date at which each add-on has been more recently updated to help diagnose problems.

  Sorry, this isn't a question, but a suggestion. If a conflict exists between the modules, it would be useful to know that it has been updated recently. I often keep track of myself, but it would be easier to have this information on the page Add on.

  "Last update" is available from the display of the modules for each module by clicking on the "More" link... "just below the name of the add-on. Scroll down on this new view of the page.

  An add-on that lists information about all Extensions or Plugins, including the date of update (last updated date shows in the options for the Extension List Dumper as "Date of installation")

  • https://addons.Mozilla.org/en-us/Firefox/addon/extension-list-Dumper/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Problem updating Firmware of the Module e/s

  All,

  I'm trying to update the firmware of the i/o Modules of 1.3.1p to 1.4.1i.  I downloaded the firmware and when I activate it I choose to ignore the compatibility tests.  The module IO then resets and goes through a process of restarting.  After a little while the State is ready but the firmware running is always 1.3.1p.  I also tried by choosing to place it in the start menu to the top only and then reset the module e/s, but the results are the same.  This happens on two modules e/s.  Interface cards and the MMIC both updated without problem, but I'm stuck at IO modules.  Anyone encountered this?  Does anyone have ideas, what may be the problem?

  Thank you

  Ken

  The IO modules get updated at the same time as the fabric of interconnection when they reload and upgrade.  Upgrade one restart of the IF that and the i/o module should be at the same time.  Note that in the activation page you should see in the meantime "rebooting" next to the modules of e/s for this fabric before restarting the FI.

• Problem with the 2007 Hallmark card studio deluxe installation and get error message "Error 1904.Module that cannot save c:\windows\syswow64\msxml4dll".

  Original title: 1904.Module error cannot save C:\windows\SysWOW64\msxml4dll. HRESULT 2147023782 contact your support staff

  I want to install hallmark card studio deluxe 2007 and I got this message

  C:\windows\SysWOW64\msxml4dll Error 1904.module cannot save. HRESULT 2147023782 contact your support staff.

  Someone knows how to fix this?

  Thank you

  Hi Roman,.

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the installation of Hallmark card studio deluxe 2007 and will receive error message "Error 1904.Module than c:\windows\syswow64\msxml4dll cannot be saved."
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. deal with any issue when installing any other program?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest to perform the clean boot and see if you can install the software.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  Method 3:
  If the problem persists, I suggest you try to remove all the temporary files in the temp folder. And check if it helps.
  Follow the steps to clear the temp folder:

  a. click the Start button and in the search in %temp% bar and press ENTER.

  b. the Temp folder opens, press on Ctrl + A , and then press delete.

  Note: I suggest that you backup important file or a folder in the Temp folder.

  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Altered photo is not seen in the module 'print '. (Win 10, lightroom 5.7.1.) What can I do to solve the problem?

  Altered photo is not seen in the module 'print '. (Win 10, lightroom 5.7.1.) What can I do to solve the problem?

  Next 'Units of the rule' in the layout, select the good 'units of the rule' in the drop down, and then set your margins.

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Please help - driver for the module Insp 8600 DVD + RW problem

  I hope someone can help with this... it left me speechless. Slim in my Inspiron 8600 DVD + RW drive module will no longer work. It does not appear in my computer folder. If I insert a CD or a DVD in there, it takes in and I can hear it roar, but nothing else happens. I tried the following:

  • Type d: / RUN... but it says there is no such drive
  • Exit the module and then put it back in, in case it was a problem of the seating. No change.
  • Ran scans antivirus and antispyware - nothing.
  • I checked the Device Manager and there are two drivers for the DVD drive - HL-DT-ST DVD + RW GCA-4040N is called and the other is a Generic DVD-ROM SCSI CDROM Device ( where the hell does he?). Both of them have yellow exclamation points on them. I uninstalled both, hoping that the replacement driver solve the problem after XP replaced. No luck - the 'new' drivers always have yellow exclamation points on them.
  • I also tried to uninstall these drivers and then installing a GWA-4040N driver; the message that came was something about Setup not being not not able to find anything to install or being not able to find the drive.

  As a side note, probably related, I tried to connect an external hard drive to the 8600 with a USB cord, but this player will also not appear / is not recognized.

  Can anyone offer any advice or solutions? I feel I've hit the wall. Not being not able to connect to a DVD player is a killer, because it is used for many things, including the loading of the software.

  Thank you all.