problem in creating a windows dvd

Similar Questions

• Created with Windows DVD Maker DVD will not play in DVD Toshiba player!

  I just finished creating a dvd in Windows DVD Maker. He played very well on the PC and burn to my DVD - R Memorex without problem.  However, now that he's in my Toshiba DVD player, nothing happens.  I have a black and white screen with down right a small square box, color.  No display of numbers on reading DVD player.  The Toshiba site indicates that it should play DVD-r.  Need of this DVD to a presentation in a few days.  What's wrong???!!!

  I'm not sure at 100%, but something similar happened to me when I created a movie in windows movie maker.
  what I had to do was to convert the file to an AVI file that I was able to do as part of the utility of movie maker, and then import the file into a dvd creator software utility called (dvd Creator free 2) and then I could read in my dvd player. It is a download free .you corresponds to the URL if you want to give it a try http://www.minidvdsoft.com/dvdcreator/ hope this helps.
                                             
  newjoiner.

• Problem adding music to Windows DVD Maker

  I try to add music (that I bought and downloaded on itunes) on a DVD that I make in the creation of Windows DVD and is not recognize the files... any suggestions?

  Try to convert music format before importing .wma files in DVD creation.

• problem to create the windows xp startup disk.

  n error occurred during the creation of the wizard disk.
  Please make sure that the disk is properly formatted and that there at least 1.4 MB free.

  Hi shlomy6666,

  · Are you able to work with the other disks?

  · What method you follow to create the startup disk?

  See the link below which was the same: how to get the installation discs for Windows XP for installation of boot floppies:http://support.microsoft.com/kb/310994

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Movies created with Windows DVD maker, hang up or restart

  I used DVD maker several times in the past without this problem.  Recently, I tried to burn a DVD, and a 10-minute clip that was just started.  I reburned the DVD, without this clip, and at around the same point in time, is the same thing, is not the file.  I tried to burn another DVD, with all the clips of orignial, without any other files or programs, and this time there were several hang ups or reboots.  No idea what is happening and how to fix it?

  Thank you for your comments.  I did not use Movie maker to make the DVD, I was using DVD maker and it has worked well in the past, with the same type of video files that I currently use. I don't think I did any changes since I modified a DVD burned, but it is possible.  I'll try to remove the filters and see what happens.
  Mary

• Problem in creating application windows using generation Phonegap

  Hello world

  I need to build the Android application and windows app but after the download of the construction code. PhoneGap only creating Android app,

  Please, help me build an Android app and Windows.

  

  Include an element of platform in your config file.

  See Configuration of | PhoneGap Docs

• my creation of windows dvd does not work! whenever I put a file to convert and burn everything stops working.its updated!

  How can I fix my windows dvd creation? It will not convert and burn all the files to a dvd disc.

  Hi egelad,

  (1) you get an error message?

  (2) is this problem limited to only a specific video file format? Have you checked with different videos with different types of files?

  Step 1: Change Windows DVD creation settings and check if the problem persists

  Change Windows DVD Maker DVD-Video settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Step 2: Clean boot the computer, and try to burn (make sure that your burner software service is running while performing clean boot).

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 3: check the Event Viewer logs and check the application and the module that fails to load. See the links below for the steps and let me know

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  If you try to convert a video file in a different format, you can do this using Windows DVD Maker, you can use third party software to do this.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please visit the links below

  Solve problems with creating a DVD-Video DVD Maker usingWindows

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I burned a dvd using windows dvd creation, when I watch it, after the first 20 minutes, that the image becomes almost black and white with pink exaggeratted shadows. WHY?

  I am compiling my football teams game film.  I created a dvd using Windows DVD Maker.  Each game is a single video file to AVI format.  When I preview the video, no problem. After having carved, (2 trials) when I watch the DVD, the menu screens look good, the video of the first part looks fine, but from second game, or of the stage, the video quality changes.  The video becomes almost black and white.  The shadows and the highlights of the video seem to be exaggerated and that they are pink color.  It seems to be an effect of video editing, but I did no changes to the video features.  Help.

  HI Maria,

  Thanks for posting this question in the Microsoft Community.

  If I understand correctly you are facing a problem with the DVD created in Windows DVD maker.

  I'll do my best to get the problem resolved.

  You can go through the steps in the article and check if it helps. Here is another article on changing some settings of the DVD creation. Go through it and tell us if it helps.

  You can also see the article for more information about video filters in Windows DVD Maker.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Windows DVD Maker error message unknown

  This is a frustrating problem I have with Windows DVD Maker that no one can seem to explain. I have a new computer, less than a month, running Windows 7. I tried to burn clips of film on DVD for various friends and family. I have finished 3 or 4 DVD with success. All of a sudden, during the burning process, I get to a point approximately 0.3 to 0.4 percent encoded when I get an error message that the DVD cannot be done due to an unspecified error. All that fresh, new, with the package of disk I'm trying to use ends up with the same message. The clips have not changed, filters have not changed, settings have not changed, I just did with some success without problem, now, all of a sudden, it cannot burn discs more. That's happened?  What should I do about it?

  Hello
   
  Follow these steps and check whether the problem is resolved.
   
  Method 1:
   
  Try to increase your capacity of RAm on your computer and check if it solves the problem.
   
  Method 2:
   
  You can follow this link forum below.
  http://social.answers.Microsoft.com/forums/en-us/w7music/thread/45baa19b-642a-43a8-A1B3-f8918f353192
   
  Method 3:
   
  This question (and others) can be caused by a video filter that might be using the file. To work around this problem, you can try to disable one or more video filters in Windows DVD Maker. For more information on the video and rotating filters or desactiver disable in Windows DVD Maker, see video filters in Windows DVD Maker: frequently asked questions.
   
  To enable the filters, off, or to restore the default list of filters:
   
  1. open Windows DVD Maker by clicking on the button start the picture of the Start button. In the search box, type DVD Maker and then in the list of results, click Windows DVD creation.
  2. in the turn your digital memories in a DVD page, click Choose photos and videos.
  3. on the Add pictures and video to the DVD page, click Options.
  4. click on the Compatibility tab.
  5. do one of the following:
  * To turn off a filter, clear the check box next to the filter name.
  * To enable a filter, select the check box next to the filter name.
  * To restore the default list, click on restore all default values.
   
  When you restore the default settings, the list and the filters settings are given to the last known good setting.
    
  6. click OK to close the DVD Options dialog box, and then continue to make your DVD.
   
  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions
   
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
   
  Hope the helps of information.

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Creating Windows DVD - decoding problem?

  Hello.

  Recently, I tried to use Windows DVD Maker for the first time. Files added in the right menu and I could create a menu and listen to excerpts from the DVD. When I click on the button to burn, however, the DVD does that make to 1.7% full and watch then say error message:
  "One or more files that have been added in DVD Maker may not be decoded properly. Make sure you have decoding software installed on your computer that can decode the different files and then try again. »
  Windows Vista Home Premium is supposed to come with software decoding (I think), and I can't seem to find a way to solve the problem. Maybe I need new software decoding? I don't know if I'm just on the obvious or not.

  Any help would be appreciated. Thanks in advance.

  Too bad. Thanks for all your help, but I solved the problem today.
  It turns out that this filmmaker of windows does support not either of the types of files that I used (.avi and .mov). They do not also support many other file types. He had to be a .wmv file format.
  I now use a new software to burn discs, because like that I don't meet problems in the future when you work with video from various sources.
  Two of the software I know who can solve the problem are Nero 9 and Adobe first Elements 7. (Just in case someone else runs into this same problem).

• Creating Windows dvd with the problem of the "invalid class string".

  When you try to burn a file to a dvd using windows dvd creation, I received a message 'tring class not valid' when burning, and the disc has been ejected. What does the message mean? How to fix?

  Hi KEVINQUACH,

  1. When you have the startup problem?

  2. you remember to make changes to the computer before this problem?

  3 - is this happen when you try to burn any type of particular file?

  You can check out the following link and try the steps suggested by Aziz N Support Engineer on December 2, 2009, and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/cannot-create-dvdinvalid-class-string/24d00965-F971-4982-A440-8bb01fc0db01

  Hope this information is useful.

• Video playback in the media player in windows (Vista) is perfect. But when I create a dvd in Windows DVD Maker and read the dvd, the sound is off by a fraction of a second on the dvd. Is this a setting problem?

  After burning a dvd, the audio is a fraction of a second offshore on playback of dvd-video.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Check if that helps.

• Problem creating Windows DVD? Or Windows Movie Maker problem?

  Hello!  I created a slide show in Windows Movie Maker, which plays on my computer without problem.  Now, I try to burn it to a DVD by using the Windows DVD authoring application.  I was able to burn my DVDs sucessfully using the wizard and when I put it in the DVD player I get the main menu I created.

  I press play and start my video, but he plays 16 seconds and everything goes black.  Time continues to roll until the full 3 minutes are up, but I have 16 seconds of my film.  I burned 3 DVD and it did the same thing.

  Can someone help me with what I'm doing wrong?

  Hi Khsb14,

  Have a. you been able to watch the video before burning?

  B. did burn the DVD?

  C. is the DVD burner connected properly

  D. is the audio work after the 16^th s?

  E. do you have a mistake when he went to the black screen?

  This could be a problem with the burner DVD or the method of engraving. Try the following methods.

  Method 1

  Previewing your DVD, you can view the photos and videos on this subject. Check if the full video is seen in the preview. This can help you determine if you want to make changes to the DVD before burning the disc.

  1. In the ready to burn DVD page, click Preview.
  2. To read the DVD preview, click play in the control screen.
  3. To control the playback, click Pause , play , previous chapter or next chapter , according to what you want to do.
  4. To display the DVD menu, click Menu. Click on the top, bottom, right, or arrows left to go in this direction on the DVD menu preview, and then click the Enter button to play the selected menu item. Click OK when you are done previewing the DVD.

  Check the link for more information.

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  Method 3

  Choose a speed slower burn to your DVD recorder as follows:

  • 1. Return to the Add pictures and video to the DVD page and then click on Options.
    2. In the DVD burning speed box, select medium or slow.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem creating Windows DVD

  I'm having a problem with Windows DVD Maker.  After the DVD was burned, the menu pictures and video clips are on half top of the screen and it gives a green bottom half of the screen.  When I preview before I actually burning the DVD, it looks great, but after that the DVD is burned, it flattens the peak to the top of the screen.  I tried changing every setting in there, but he continues to squeeze the image in the menu at the top of the screen.  The DVD is very good, but the menu is messed up.  Any help would be great.  Y at - it a update or something that could help solve this problem?

  I'm having a problem with Windows DVD Maker.  After the DVD was burned, the menu pictures and video clips are on half top of the screen and it gives a green bottom half of the screen.  When I preview before I actually burning the DVD, it looks great, but after that the DVD is burned, it flattens the peak to the top of the screen.  I tried changing every setting in there, but he continues to squeeze the image in the menu at the top of the screen.  The DVD is very good, but the menu is messed up.  Any help would be great.  Y at - it a update or something that could help solve this problem?

  ================================================
  No guarantee... but... the info copied on the net... may be useful:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot create Windows DVD, burning the disc - Satellite L350

  Can someone help I'm on a Toshiba satellite L350
  I'm trying to burn a DVD with Windows DVD maker. It is the fourth I've done and the previous ones were all OK.

  I can't burn the DVD, I tried both types of disc and made about 10 attempts today.
  When I try to burn it starts OK then I get about 34% and get an error message

  I had two different error messages, it says "cannot create the DVD error unspecified.". "
  The other says "cannot create DVD catastrophic failure"

  As Akuma wrote, it can be a problem creating Windows DVD and has nothing to do with the functionality of optical disc drive. It is good to check the updates.

  Can you test the WEIRD feature using a different burning application?