Problem isolation really strange cluster...

Similar Questions

• Really strange problem with Yoga tab 3 10.1 "

  OK, up until that today ' today all was well with my new Yoga 3 tab 10.1 ". Today, he has developed a strange problem.

  The screen kept going blank and in return then and also would lose some wallpaer I had and went back to the default.

  So, as my wallpaper is all stored on the card microSD, I decided to turn off the power and remove the card.

  After plugging everything seems OK... So far, that is.

  I'm currently copy everything off the card on my PC and the test card and reformat to see if that takes care of it, and I'm going to order a new card just as a precautionary measure.

  No idea why these symptoms?

  Well, after doing a formatting FULL of the microSD card on my machine Win7 and retransfering files back to him, he seems to have solved the problem. I think that full format dealt with issues on the map.

  But, because I'm a FIRM believer in the CYA, I also ordered another card anyway. Figure better than cure.

• 1766 BWAA PLC - interface Labview Act really strange

  Hi all

  It is a very, very odd response, I want to come.

  I have an automaton of 1766-BWAA with which I am in communication via modbus.

  an AIN, a DOUT and a DIN module is connected to the controller.

  When I decide to the PLC using Modscan - coil status, entry status, registry entry - I am able to control the robot. Can I read/write of the coils, read AIN read module DIN modules. This is why I think that the problem might be with Labview.

  but when I try to do the same thing with Labview, I get only the part right DOUT. AIN and DIN give me the strange answer. Here's the situation.

  AIN module: I connected a source meter in AIN. I give the source alternately to channels 0-4. but the labview program reads the registry PLC only if I read once by using modscan. The sequence for detection of AIN in Labview is (!), concern 1V AIN0, run modscan, labview. apply 2v to AIN0, run modscan, launch labview. The current value and the previous value now appears in the labview alternately. the duration of this fluctuation is 5. (reading that I will be AINvalue to 1V, value AIN to 2V, junk, junk, junk and this cycle repeats. strangely, its iterations always 5)

  Same situation with DIN. If I want the value in Labview, I read in modscan once. Its like he labview follows modscan.

  It's weird. I am not able to understand why thi happening. VI that I used for the reading of the PLC is attached.

  Any help will be appreciated.

  Hello

  The problem has been resolved with the addition of a header PMAV in vi of the request.

  Kind regards.

• Can someone help me with this problem of very strange wireless networking? (intermittent connectivity)

  So I'm having a very strange problem with my wireless adapter. (surprise, right?) Let me explain just what is happening here: I will use my computer, online, do a lot of things like play games or surf the web. Randomly, for no apparent reason, my wireless adapter disconnects the current network disconnect myself from everything I do. When I check my available wireless networks, I can't see a single network. This has happened to me for a while. When he started it first, I tried many things including the uninstallation of a reinstall of my adapter without success. I have to restart my computer to fix. This happens from time to time and has not stopped since the first occurrence. Originally, if I would try to find a network or uninstall/reinstall, my computer would be soft locking and I would be able to use the windows closed functionality, it would just hang out there indefinitely until I hard loaded. Now its being less skittish and let me do a reset software to fix, but it becomes very annoying. I know this isn't my router because all my roommates can still connect to the network very well, and the router will not prevent me to see many (15-20) wireless networks in the region. If someone can help me even by some light on what is happening, I would be very grateful, because I'm getting very frustrated by that. I reinstalled the map, he pulled for dust, etc. etc. It is not usb and its actions with the system. The Device Manager it says as a 802.11n wireless adapter PCI Express LAN Card, manufactured by LITE-ON TECHNOLOGY CORPORATION. Connected to the 4 PCI bus, device 0, function 0.

  Thanks in advance:

  Justeroo

  Try without commitment TCP/IPv6 (which is done by going to network connection > click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• When you make a circle, illustrator automatically a lot, many circles more... How to solve this problem? Really need quick tip!

  Hello

  Now, I used illustrator for a long period of time. Recently, I bought Adobe CC. Had no problems with it so far.

  It's like that. When I try to make a circle (or, square, line or other forms) Illustrator made lots and lots of other circles it contains.

  As soon as I click on the page until I release my mouse, it retains in circles. (see photo)

  I have really no idea whatsoever how to cancel it. I used Illiustrator before CC for another project, and it worked fine. Now, however, is not.

  Can someone help me out here? I paid projects to offer, and I really need this to work really soon...

  Thnx for your help!

  BTW, I'm working on a PC with Windows 8. (don't really think that's relevant, but still..)

  

  Check if your tilde key is stuck.

  Or you have installed everything that gets s NLE keyboard and Illustrator?

• Problem with Vmware Ha cluster

  Good dekdak all

  I have a problem with vsphere 4.

  Today, I have to change the ip of the host 3 addreeses and a virtual Center.

  I do these things with your help like that, connect on VC disconnect all hosts and remove.

  Vcenter stopover services change beginning vcenter intellectual property services.

  Change the Ip addresses of the hosts, but now I get this error when I try to connect to the host to vcenter.

  Unable to connect ha agent on this host,.

  Please help me because Icannot create the cluster now, I don't know why

  Hi Patrizio,.

  Make sure your vCenter and all ESXs records are updated in your DNS infrastructure (or files hosts...).

  Good luck.

  Concerning

  Franck

• Problem VMDK file large cluster in a box

  So I've been running a flavor of vmware server 2.x since its release with little or no problems. Not that it matters but my host server is a Dell Poweredge 1900 with 32 GB of RAM, running windows server 2003 x 64.  I have also 2 Windows VM that I run as a cluster in a box, and they worked very well in this way for more than 3-4 years at the time of vmware 1.x. Both virtual machines have been set up exactly as such:

  SCSI 0:0 16GB & lt; - c drive

  1:0 500 MB & lt; - quorum SCSI cluster

  SCSI 1:1 12GB & lt; - the app cluster disk

  1:2 950 GB SCSI & lt; - storage of cluster disk

  SCSI 1:3) 12 GB & lt;-the sql cluster disk

  1:4 250 GB & lt; - disk SCSI storage of additional cluster

  What I did recently to set up a new file 2 TB since vmware server 2.x vmdk will now allow you to make files vmdk bigger than the old limit of 950 GB. This new 2 TB file was supposed to replace my 2 readers of old SCSI 1:2 and 1:4 SCSI cluster storage. After making the swap and copy all data to a vmdk file again, I noticed a problem at any moment I'm going to and move the resource cluster VMDK new 2 TB to the other server. Basically the two servers stop responding and it seems that vmware server choke on the 2 TB for some reason vmdk file any. Here's what I see in my logs any time that this happens.

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.968 02 Dec: vmx | SCSI1:2: READ command (10) took 45,504 seconds (ok)

  01:22:46.062 02 Dec: vmx | SCSI1:2: RELEASE (6) command took 5,235 seconds (ok)

  01:22:46.093 02 Dec: vcpu-0 | DISC: Resync'ing disc scsi1:2.

  01:23:08.593 02 Dec: vcpu-0 | DISKLIB-DSCPTR: open : 'storage3.vmdk' (0x6a)

  01:23:08.593 02 Dec: vcpu-0 | DISKLIB-LINK: opened 'e:\virtual_machines\storage\storage3.vmdk' (0x6a): monolithicSparse, 4194304000 sectors / 2.0 TB.

  01:23:08.593 02 Dec: vcpu-0 | DISKLIB-LIB: open "e:\virtual_machines\storage\storage3.vmdk" (flags 0x6a).

  01:23:08.609 02 Dec: vmx | SCSI1:2: READ command (10) took 22,527 seconds (ok)

  01:24:15.640 02 Dec: 1 vcpu. DISC: Resync'ing disc scsi1:0.

  Has anyone ever ran across this or has anyone ever used a file vmdk of this size as a cluster resource? As I said before that I had 0 problems with my cluster before I added this new 2 TB vmdk file...

  I'm not at all surprised that you get this problems.

  You use monolithicSparse vmdk type!

  For cluster in a box, I highly recommend flat VMDK.

  I wonder that it worked for you all with the drive more sharing

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Problem very very strange

  I'm pretty good in the action script, but this one kills me, it's stupid to have something.
  
  I'll just paste my code, hope it's okay...
  
  Sometimes the "CurrentImages" variable is set using this "CurrentImage = CurrentImage-(-1);" sometimes it gets defined using this "CurrentImage = CurrentImage-1;" And on very rare occasions, it gets set to this "CurrentImage = this._name.toString () .substring (4);
  
  When the last method is used to set the variable CurrentImage, something strange happens to the if statement
  "If (CurrentImage < Data.n) {}" she says it's wrong for 5 to 9 numbers and true to any other number that are less than Data.n.
  At this time, Data.n is 46 and 7 should be less than 46, it must be true, but it's wrong... and I don't know why.
  
  If someone could help me solve this problem, I'll be very grateful
  
  

  In your last method of calculation CurrentImage, CurrentImage becomes a string and not a number. And so he made the comparison in alphabetical order, IE see what first figure is lower, if number, next, and so on. Thus, "46" would be less '7', because 4<7. to="" remedy,="" use="" the="" number="" conversion="">

  CurrentImage = Number (this._name.toString () .substring (4));

  It gives the numeric value of the given expression.

• Sierra - big problem - there really no more audio or video conversation in messages...?

  Hello

  I just discovered this messages.app no longer offers an audio or video conversation.

  Apple is really serious about this?

  Someone at - it an idea for a good alternative, which offers audio conferences for small businesses?

  See you soon

  Carl

  Hello

  The ability to 'iChat' in one account AIM and Jabber for video chat or Audio Only WITHIN the app is no longer.

  The Menu of the video has disappeared.

  Screen sharing also went to El Capitan (in the House somehow)

  We have text iMessages cats invoke FaceTime upper-right Details option.

  Or the screen sharing application for screen sharing.

  Of course this "force" everyone to use the iMessages Apple ID account.

  This mock to 'Fix' the SNATMAP BONE Xserver 10.10.3

  Trillian https://www.trillian.im/ is a PC application that was a version of free text and one for the Pro version which could then Video Chat

  I know that they have diversified in other versions and there is one for Mac.

  I never worked if they also did the Pro for Mac version.

  I have also not clear if it employs different video formats for cats of PURPOSE compared to Jabber ones (Hello and AIM and Jabber on a Mac are essentially the same even if they do not allow connections from Service crossed) Jabber use Jingle and aims essentially to AIM and long ago was compatible with iChat.

  NOTE Jingle is actually an add-on to Jabber/XMPP but is not compatible with GoogleTalk Google video or their plug-in for browsers.

  I've not updated with others.

  I follow a page, written by another long post here (EZ Jim), but we have not updated since 2006

  http://www.ralphjohns.co.UK/EZJim/EZJimpage7.html

  However, he lists a few of them in the section chats and Conferencing, you might want to give more.

  In the latest new applications seemed to come and go.

  

  21:31 Thursday. September 22, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Problems in the strange display on my Satellite A205 driver

  My laptop came with 2 GB RAM and Geforce Go 7300 with a total memory of 399 MB. I bought this laptop about 4 months ago and had no problem with it until 2-3 weeks ago.

  I play World of Warcraft online game, and I know that this game requires no high performance to work properly. However, it is not the actual gameplay which is lagging for me is when I 'window' the game and then try to expand the window. What happens is the screen becomes black and 3-4 seconds later it turns with the maximized window.

  Then an error message your stay "your nvdlmm (sp) of display driver stopped responding but has been recovered." comes out in the lower right.

  Now the question: how worried I would be on this issue? Should I call Toshiba and ask them if they could solve this problem or is not something to worry about?

  Thank you.

  Hey Buddy,

  Don t you have to worry, but I suggest you to update your your machine display drivers, because it s is still better to have installed the latest drivers.

  Check these sites for the latest display drivers:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  This driver is the latest communicated to manufacturers ATI & Nvidia, but they have been modified to run on mobile systems as mobile graphics cards have different timings (GPU, memory, etc...)

  Welcome them

• Really strange text

  Using elements 6 Vista Home first 64 Service Pack 2

  Yesterday for some reason any, whenever I try to add the text as soon as I use 'e' followed by an 'r' as in 'Merry' the space between the e & r gets huge, I'd say about the same as 50 letters!

  E additional letter are normal spaced apart from each other but distant rest, removing extra e r is not the normal spacing but adding any other letter between the e and the r done restore spacing, remove the additional letters to exit e & r together and space reappears... As far as I can tell that it is a combination of letters that causes the phenomenon, which is strange and annoying.

  Any ideas what is happening and what is most important - how to return to normal letterspacing.

  Thank you

  Click the text tool

  Click the arrow in the drop-down menu (to the left of the name of the font on the options bar)

  Click Reset tool.

  Let us know if it works.

• A really strange behavior with updateDisplayList drawing extended Image

  It's two days I am stuck on this problem of srtange: I write a simple class called UserImage which extends from Image and implements IFocusManagerComponent.

  My goal is to have a draggable and resizable, image by dragging the edges in a canvas.

  Because there may be several UserImage instance in the same Web, I want the image currently used, the last click dessu, to be lined.

  Now everything works until I

  1. Select the image by clicking on, and the border shows correctly

  2. drag the image and the image retains the right border

  3. resize the image, now the border resizes properly BUT Gets the two offsets equal to the last drag XY (point 2)

  Please, there is someone who could help me? According to my low experience with Flex, it is two days I am Googling for anything

  Here's the relevant code of the IMO:

  the code in generator.as, compared to the canvas where her occurs drag and resize

  Called when the user moves the proxy to slide on the drop target.
  private void dragEnterHandler(event:DragEvent):void {}
  trace ("initiator DragEnter:" + UserImage (event.dragInitiator) .x + "" + (event.dragInitiator) UserImage there);
  Download the target of the event object drop component.
  var dropTarget:Canvas = event.currentTarget as canvas;
  Accept the drop.
  DragManager.acceptDragDrop (dropTarget);
  }
  
  Called if the target accepts the dragged object and the user
  release the mouse button while on the canvas container.
  private void dragDropHandler(event:DragEvent):void {}
  Compensate for the location of the mouse pointer in the title bar.
  var newX:uint = event.currentTarget.mouseX - (event.dragInitiator) UserImage, .offsetX;
  var newY:uint = event.currentTarget.mouseY - .offsetY (event.dragInitiator) UserImage;
  If (event.dragSource.hasFormat ("drag")) {}
  trace ("initiator Drop:" + UserImage (event.dragInitiator) .x + "" + (event.dragInitiator) UserImage there);
  event.dragInitiator.move (agree, y);
  trace ("Drop newxy:" + agree + "" + y);
  } ElseIf (event.dragSource.hasFormat ("resize")) {}
  trace ("initiator Drop:" + UserImage (event.dragInitiator) .x + "" + (event.dragInitiator) UserImage there);
  event.dragInitiator.width = UserImage (event.dragInitiator) .width + agree - UserImage (event.dragInitiator) .x;
  event.dragInitiator.height = UserImage (event.dragInitiator) .height + y - there UserImage (event.dragInitiator);
  }
  }

  This is UserImage.as, the class resizable image of end of draggabel

  package com.lutek.components
  {
  import flash.display.Shape;
  import flash.events. *;
  
  Import mx.controls.Image;
  Import mx.core.DragSource;
  Mx.events import. *;
  Import mx.managers.CursorManager;
  Import mx.managers.DragManager;
  Import mx.managers.IFocusManagerComponent;
  
  SerializableAttribute public class extends implements IFocusManagerComponent Image UserImage
  {
  descriptive field
  [Inspectable]
  public var description: String = new String;

  Incorporate the symbols of cursor
  [Embed (source = "move.png")]
  private var dragCursorSymbol: Class;
  
  [Embed(source="resize-r.png")]
  private var resizeCursorSymbol: Class;
  
  necessary to calculate offset them between point clicked and position of the image
  public var offsetX:uint;
  public var offsetY: uint;
  
  State of the image
  public var isClicked: Boolean = false;

  form when you click
  place private var: Shape = new Shape();
  
  Set a variable to contain the ID of the cursor.
  private var cursorID:Number = 0;
  
  indicates whether the image is visible
  public var isOnStage:Boolean = false;

  override protected function updateDisplayList(w:Number,_h:Number):void {}
  super.updateDisplayList (w, h);
  Square.Graphics.Clear ();
  square.graphics.lineStyle (2, 0x00ff00);
  square.graphics.drawRect (this.x, this.y, this.width, this.height);
  }
  
  public void UserImage()

  
  {
  Super();
  this.focusEnabled = true;
  addEventListener (flash.events.FocusEvent.FOCUS_IN, FocusInImage)
  addEventListener (flash.events.FocusEvent.FOCUS_OUT, FocusOutImage);
  addEventListener (flash.events.MouseEvent.MOUSE_MOVE, Moveimage);
  addEventListener (flash.events.MouseEvent.MOUSE_OVER, OverImage);
  addEventListener (flash.events.MouseEvent.MOUSE_OUT, OutImage);
  addEventListener (flash.events.MouseEvent.CLICK, ClickImage);
  addEventListener (flash.events.MouseEvent.DOUBLE_CLICK, DblClickImage);
  addEventListener ("creationComplete", completeImage);
  addEventListener ("updateComplete", resizeImage);
  square.graphics.lineStyle (2, 0x00ff00);
  square.graphics.drawRect (this.x, this.y, this.width, this.height);
  this.addChild (square);
  }
  
  private void resizeImage(event:Event):void {}
  }
  
  private void completeImage(event:Event):void {}
  }
  
  private void FocusInImage(event:FocusEvent):void {}
  display a square in the display list.
  This.Square.Visible = true;
  }
  
  private void FocusOutImage(event:FocusEvent):void {}
  hide a square to the display list.
  This.Square.Visible = false;
  this.isClicked = false;
  CursorManager.removeCursor (cursorID);
  
  }
  
  private void OverImage(event:MouseEvent):void {}
  }
  
  private void OutImage(event:MouseEvent):void {}
  CursorManager.removeCursor (cursorID);
  }

  private void ClickImage(event:MouseEvent):void {}
  this.isClicked = true;
  }
  
  private void DblClickImage(event:MouseEvent):void {}
  }
  
  private void MoveImage(event:MouseEvent):void {}
  var action: String = "";
  If {(this.isClicked)
  If (this.width - event.localX < = 10 & & this.height - event.localY < = 10) {}
  Set resize cursor
  If (cursorID == 0) {}
  cursorID = CursorManager.setCursor (resizeCursorSymbol);
  } else {}
  CursorManager.removeCursor (cursorID);
  cursorID = CursorManager.setCursor (resizeCursorSymbol);
  }
  action = "resize"
  }
  else {}
  If (cursorID == 0) {}
  cursorID = CursorManager.setCursor (dragCursorSymbol);
  } else {}
  CursorManager.removeCursor (cursorID);
  cursorID = CursorManager.setCursor (dragCursorSymbol);
  }
  action = "dΘplacer";
  }
  Save the offsets to oppose
  this.offsetX = event.localX;
  this.offsetY = event.localY;
  
  Download the initiator component of drag of the event object.
  var dragInitiator:UserImage = event.target as UserImage;
  
  Create a DragSource object.
  var ds:DragSource = new DragSource();

  Add data to the object.
  ds.addData (dragInitiator, action);
  
  Call the DragManager doDrag() method to start the operation slip.
  DragManager.doDrag (dragInitiator, ds, event);
  
  }

  }
  }
  }

  The first thing I saw was this:

  override protected function updateDisplayList(w:Number,_h:Number):void {}

  super.updateDisplayList (w, h);

  Square.Graphics.Clear ();

  square.graphics.lineStyle (2, 0x00ff00);

  square.graphics.drawRect (this.x, this.y, this.width, this.height);

  If the object is placed at 100 100 and you want to square in the upper left corner, you want to draw to (0,0), not to the coordinate x, y.  You have to remember when you need to use coordinates parent or child coordinated

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• cfqueryparam really strange behavior

  Hello!
  
  I have the following scenario.
  
  CFMX 7.0
  MS SQL 2005
  Col1 and Col3 nvarchar and Col 2 is an int.
  
  Sql job: (returns all rows corresponding to clause)
  SELECT * FROM table WHERE col1 = < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#var1 #" > AND col2 = < cfqueryparam cfsqltype = "cf_sql_integer" value = "#var2 #" > AND col3 = < cfqueryparam cfsqltype = "cf_sql_varchar" value = "staticvalue" >
  
  Working also sql (returns all rows corresponding to clause)
  SELECT * FROM table WHERE 1 = 1 AND col1 = < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#var1 #" > AND col2 = < cfqueryparam cfsqltype = "cf_sql_integer" value = "#var2 #" > AND col3 = "staticvalue.
  
  Sql does not (returns only a single line)
  SELECT * FROM table WHERE col1 = < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#var1 #" > AND col2 = < cfqueryparam cfsqltype = "cf_sql_integer" value = "#var2 #" > AND col3 = "staticvalue.
  
  As you can see, the use of cfqueryparam with the static value does work #1 query and adding 1 = 1 in the where clause makes wonder work #2. But I think it's very, very strange that #3 query shouldn't work - and what even more strange is that it somehow at least returns a single line...
  
  Everyone knows everything about this behavior?
  
  Kind regards
  Johan

  Oh, you don't have to add N to the value of the nvarchar columns?

  IIRC, something like AND col3 = no staticvalue'

  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com/

• Really strange behavior ("registry support" found)

  Hi all

  I'll try to be brief and clear: today, I was working from home with several open windows. Such a window is a Gchat window that I was chatting with someone. I was cleaning my keyboard with a cloth before that, but when I sat back on my computer, it was typing in the text window Gchat past. At the beginning it was a bit of gibberish, then it was backspaced and replaced by BABAR (something I would google at some point in the past). Immediately after, a window open to some site that lists famous quotes (whom I had probably a search for since a long time during the school year for a College paper). In addition, windows were which is clicked on in the background, as if someone was messing with my mouse.

  So I did a scan on my system and found the following:
  The process of memory detected: 1
  C:\Program Files (x 86) \Registry Helper\RegistryHelperService.exe (Rogue.RegistryHelper)-> 2232-> no action taken.

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 4
  HKLM\SOFTWARE\Registry Helper (Rogue.RegistryHelper)-> no action taken.
  HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\RegistryHelper.exe (Rogue.RegistryHelper)-> no action taken.
  HKLM\SYSTEM\CurrentControlSet\Services\Registry helpline (Rogue.RegistryHelper)-> no action taken.
  HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Registry Helper (Rogue.RegistryHelper)-> no action taken.

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Records found: 2
  C:\Program Files (x 86) \Registry Helper (Rogue.RegistryHelper) not-> no action taken.
  C:\ProgramData\Microsoft\Windows\Start Démarrer\Programmes\Registry Helper (Rogue.RegistryHelper)-> no action taken.

  Files detected: 32
  C:\Users\Windows\Downloads\DownloadSetup (1) .exe (Affiliate.Downloader)-> no action taken.
  C:\Users\Windows\Downloads\DownloadSetup.exe (Affiliate.Downloader)-> no action taken.
  C:\Users\Windows\Downloads\FastDownload.exe (Affiliate.Downloader)-> no action taken.
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.jpg (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.jpg (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.wav (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.gif (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.chm (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.htm (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.htm (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.htm (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.htm (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.htm (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.htm (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.jpg (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.gif (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry Helper\Registry Helper Screen Saver Setup.exe (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry Helper\Registry Helper.url (Rogue.RegistryHelper) no-> no action taken.
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.

  
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.
  C:\Program Files (x 86) \Registry.exe (Rogue.RegistryHelper)-> no action taken.
  C:\ProgramData\Microsoft\Windows\Start demarrer\programmes\registry Helper\Registry Helper Help.lnk (Rogue.RegistryHelper)-> no action taken.
  C:\ProgramData\Microsoft\Windows\Start Démarrer\Programmes\Registry Helper\Registry Helper.lnk (Rogue.RegistryHelper)-> no action taken.
  C:\ProgramData\Microsoft\Windows\Start Démarrer\Programmes\Registry Helper\Visit our Website.lnk (Rogue.RegistryHelper)-> no action taken.
  
  
  My question is, are the result of a Trojan horse?
  In addition, these files would explain the behavior I mentioned above? I would like to know for my peace of mind...
  Thank you all.

  OK, that doesn't sound good. I suggest that you go to this website and follow the instructions.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• How to open a file of ph3? It seems really strange to use Notepad to open a php file extension ph3 paying for the more recent and dreamweaver

  Go in Edition > Preferences > FileType/editors and add ph3 to 'open in code view.

  Go in Edition > Preferences > FileType/editors and add ph3 to 'open in code view.