Problem loading Wireless Laser Mouse 7000

Similar Questions

• Compatibility of the 'wireless laser mouse 7000' with 'wireless laser mouse 6000 receiver.

  Hello

  One of my colleagues gave me his extra Wireless Laser Mouse 7000, but he gave me a Wireless Laser Mouse 6000 receiver. will be the mouse 7000 and 6000 receiver work? are they compatible?

  help someone?

  Hello

  Yes those should work - just install the software (Intellipoint) and configure the mouse than the 7000.

  IntelliPoint - free
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Microsoft Natural Wireless Laser Mouse 7000

  Hello

  I have a 7000 Microsoft Natural wireless laser mouse that I bought as part of a package with a keyboard. The problem I have is the mouse didn't cause the Web page, I've been to zoom in 1000% without me clicking on it, I would like to get back to 100% but he would do it again, it would start then zoom in with all the way to 25%. Also, I can't click on the red x to close a window. On my desktop mouse has already made something as if I dragged something to move. It also uses the left button as if it were a right-click opening things while all the other buttons do nothing. I checked al the configuration and the buttons are assigned correctly. I'm really confused and it is difficult to explain (its like the mouse that has a mind of its own), but I tried everything from changing batteries, uninstalled the software and put it back in place and even move the receiver to another USB port wireless. I have no more ideas about what I can do to make my mouse works normally again. Please could you contact me and advise on what I can do then, as it is very frustrating and practically impossible to use the computer with the mouse behaves as it is.

  Thank you

  Hello

  Test the product on another computer:

  To help you determine if the problem is due to your computer or device, try the mouse on another computer.

  See also: http://support.microsoft.com/kb/838398/en-us

• My Wireless Laser Mouse 7000 does not load correctly

  When I go to load my mouse that it will begin charging and the Green led will be lit. But after all minutes the green light turns off and then it starts flashing red. The charge only lasts for 10 minutes. Is there something that can be done to solve this problem?

  Hi MageeT,

  If it works well before?

  (a) replace the battery

  (b) check whether the device works on another computer

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Wireless Notebook Laser Mouse 7000

  How can I find and open the compartment to batteries?

  Hello

  Hope this will help you

  This is just to show that you were the battery is unless you are having a problem with your, then you may be interested in the Advanced...

  http://turbulentsky.com/Microsoft-Wireless-Laser-Mouse-7000-8000-flashing-red-led-battery-doesn ' t - charge.html

  Concerning

  GT4U

• New Notebook Laser Mouse 7000 - click on the button does not work so it is unusable

  If this is the wrong forum, please let me know. I couldn't find an obvious forum for mice. My old wireless mouse does so after much research, I chose a Laser Mouse 7000 and ordered online. I have download the drivers, follow the instructions for setting up and pressing the buttons, the installer with ALL THE BUTTONS by DEFAULT, reset and CLICK does not work. It acts like I am struck by right click. I tried moving, rearranging button settings, nothing works. When I go into control panel it says it is not working properly, but this certainly isn't. I also restarted x 2 to try to make the problem go away.

  It is a defective material, so should I just sent to the seller? That I've already lost too much time on this stupid thing. If I didn't always have a wireless mouse, I would not be able to use my PC

  Windows vista 64-bit standard

  Oh, I try the product. I have to enter the product number. It is very very small and very difficult to read, but I can enter the product correctly, I think. But here is the message that I will be back:

  "The product ID does not match the selected product.
  The product ID you entered is for Microsoft Wireless Notebook Laser Mouse 7000 (all languages), which is different from Microsoft Wireless Laser Mouse 7000 (all languages) you selected for support. Please enter the ID number of the product for Microsoft Wireless Laser Mouse 7000 (all languages) or click Select the product to select the right product. »

  WTF?

  Hello

  Microsoft Hardware Support access in the United States is 1-800-936-5700

  Dial the number and when he asks PID just say you don't know. You will need to give to the
  Tech answers so have a magnifying glass very convenient. There could be a more easy to read number on
  the receiver.

  Believe it or not, I had exactly the same experience with my entire keyboard and mouse, and I am
  in the meantime the new series arrived. Rob - bicycle - Mark Twain said it is good.

• DELL INSPIRON 2320 - Natural Wireless Laser Keyboard 7000 - default value is | Caps lock | WE (turned on) in all fields of password

  Hi y ' All

  DELL INSPIRON 2320 - Natural Wireless Laser Keyboard 7000 - default is Caps Lock ON (active) only when the cursor is in a field of password.

  The game of keyboard mouse 7000 is great.

  However, when the cursor is in any field/bos where a password must came me in, CapLock default value (setting) is ON or activated.

  • This only happens only in a field/area requiring a password to enter... but it happens each unique time, any application or what connection Web site password field I can be located anywhere on the Internet.
  • Again, this is only a problem when the cursor is in a password field.
  • This (setting) can be reversed that, when the cursor is in an area of password, default (setting) will be | Caps Lock |  STOP =?

  In the BIOS settings, I only find a selection of NumLock setting.  In Centre of keyboard and Microsoft mouse, the only setting that I can locate offers the choice to enable or disable the use of the Caps Lock key... entirely.  So, when turned on, the default value is lock shift = WE only in a password box.  Know, I is not no accidentally redundant; I repeat this case specific to the question in order to stress that this is the only time only this question.

  Like most people, I have to enter the password often. This problem occurs if the "remember me" or "keep me logged in" is selected.

  It's much more irritating.

  Thank you for your considerations and possible solutions, if any.

  Bobby

  1. Dell Inspiron 2320
  2. Windows Pro V.7.0
  3. Microsoft Natural Wireless Laser Mouse 7000

  #      #      #

  end of post

  Hello

  To turn off the caps from the BIOS lock, you will need to contact the manufacturer of the BIOS.

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  Reference:

  http://support.Microsoft.com/kb/894037?WA=wsignin1.0

  It will be useful.

• Use Microsoft Wireless Notebook Laser Mouse 7000. Horizontal scrolling does not work

  Original title: mouse scrolloing problem

  I just bought a Microsoft Wireless Notebook Laser Mouse 7000 and my scrolling does not work, is their a way to implement or to solve this problem?

  Hello

  1. the problem occurs on a particular application?

  I wish that you follow all the methods in this article to resolve the problem.
   
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

• Driver Wireless Laser Mouse (PA3706E-1ET1) problem software on Windows XP

  I have a Toshiba Wireless Laser Mouse PA3706E-1ET1 that gives a serious problem with the MouseDriver.EXE software provided on the CD with the mouse.

  * First release _ * _: when you install the driver on the CD I get an error message saying that they are not certified by Microsoft. The documentation that came with the mouse has an additive brochure that says about it and ignore that the software works without any problem.

  * _The issue_ *: with the mouse driver, I get a mouse icon in the windows taskbar and clicking on it will allow me to set up all the extra buttons running. Everything works very well at this point. The problem occurs when I try to shut down Windows (this is Windows XP) it will fail to finish. It seems to me close a few icons in the status bar, but then it stops. I can click on stop again and it still will not close. If I click with the right button on the mouse icon of toshiba in the windows taskbar and click EXIT in the drop-down menu, then shut down Windows and then stops. It seems that the mouse driver is to avoid a stop down. This is what is displayed in the event viewer:

  Event type: WARNING
  Event source: USER32
  Event category: no
  Event ID: 1073
  Date: 02/07/2009
  Time: 10:53:03
  User: NT AUTHORITY\SYSTEM
  Computer: PC
  Description:
  The attempt to shut down the PC

  For more information, see Help and Support Center in [http://go.microsoft.com/fwlink/events.asp].
  Data:
  0000: 00 00 00 00...

  * _Third issue_ *: it is serious, I have Microsoft Virtual PC. When I launch and run any VPC I get a blue screen of death. The error is DRIVER_IRQL_NOT_LESS_OR_EQUAL and the offending component is SysMouseFilterF3.sys.

  If I uninstall the mouse driver that disappear from all of the above questions. The mouse works but not all buttons. Scrolling the mouse left + right, vertical and the back and buttons before work, but the parchment of horizontal tilt and two additional buttons do not work.

  I can't find any mention to my model mouse on Toshiba or the Internet in general. Is there an updated driver for this mouse or in any way I can solve problems above without losing the functionality of the extra buttons?

  -Andy

  Re: Toshiba Wireless Laser Mouse PA3706E-1ET1 (which is appears as 'Sysgration USB mouse' in hardware)

  Yes, Andy, I have the same problems with this mouse. No driver updated (or even original) with a view to anywhere.

  Called Toshiba - all they could suggest "just use the drivers on the CD" and unable to offer any other suggestions!
  No drivers on PC World UK (seller) or Sysgration site or the other.

  Author of the driver (info email the driver DLL) contacted but no response until now.
  SysMouseFilterF3.sys does not seem to be the culprit because it causes a blue screen of death on the startup of the system.
  In order to get the mouse to work I just uninstalled Sysgration drivers and delete the mouse in the hardware list.

  Windows Xp then tried and it seems to work ok with driver default for Microsoft - but only right + left, scroll, front + rear, Alt + Tab appear to function.

  Colleagues, it takes up to a new driver appears!

• Wireless laser mouse 6000 v2.0 freezes / causes other problems.

  I had the wireless laser mouse 6000 v2.0 and the keyboard since April, but the problem just started occurring. I'll start my computer (I have Windows XP) and everything will be fine. As a first step, I can click on the start menu, but if I open a window, it seems that whenever I go to click on the window it will click out of it so I can't select it. From there on, I can't click on anything, no icons or anything. I have to press ctrl alt del to be able to click on the window or another program. I also discovered while I was in Internet Explorer I would surf the web, and he would start pages like I'm pressing the back button to return.

  I already tried things:
  -Uninstall Intellitype, uninstalling the drivers.
  -Change the USB ports.
  -Elimination of some programs / firefox & internet explore [I thought that maybe a bug as possible.]
  -Completely nuking my computer and put a new new version of Windows XP.
  None of them worked.

  The only thing that worked was to move the mouse and the keyboard with my old mouse and keyboard that are not wireless. This is driving me crazy. I just received it and had no problems until recently perhaps an update of some sort, but now he does it on a fresh new copy of XP. What other options do I have?

  I had problems by two different laser mouse 6000 V2, on one, the right click does not work except sporatically, now my other mouse is having problems with the left click function.  I am about to replace the micro-switch SPST (I think that's true) to see if that fixes it.

  FOR INFO!

  I contacted microsoft on this subject (on the defective mouse) about 1 year... less than 2 weeks I received a COMPLETELY NEW mouse AND keyboard NEW in box to NO FEES, no RMA, NO return and was NEVER billed for replacement.  I ended up giving the other combo to my brother and he still works fine (other than the hard drive to use right click on the service), the same thing is happening to this mouse, it is difficult to make a left click, sometimes it works, sometimes, it is not click at all, sometimes it double click on...

  Give it a try, send an email to microsoft.

  I think they have problems with their defined wireless desktop V2 and replace without charge, without admitting a problem.

  Hope this helps somehow.

  PSS, if you have NO function of the mouse AND keyboard, or just the mouse work not at all (NO movement etc.) I had a neighbor install a just CB radio next... frequency RF interfered with the signal RF mouse and the mouse (and sometimes the keyboard) refused to work as long as he handed (IE holding the key to the transmission on the CB).  Sorry if this seems rudimentary, but some people have trouble understanding certain issues so I try to make them as simple as possible.

  The rule that follows:

  Interference RF (CB, other wireless devices on the same frequency (of HAM Radio etc.),

  Exclude the above listed issues.

  Otherwise, it would appear that you have either A: a bad receiver (The Oval device plugged into the PC), or B: a bad mouse RF transmit/receiver.  Anyway that I will try to return the product I used the Wireless Desktop 6000 V2 over 3 years with NO problems other than to wear down me the switches in mice.  (I use my PC very strongly).  Try emailing Microsoft for a replacement, it can't hurt and maybe you'll get a new like I did!

• MS Wireless Laser Mouse 8000 charging light illuminates any

  Recently, I noticed that the witness of charing on my MS Wireless Laser Mouse 8000 is not lit at all when on the charger. Not green, not red, not flashing, not stable. Just nothing.

  So far, it works again, it seems to charge, but I would like to know if there is a problem. I've done the obvious things (for me): clean the contacts taken care to what the charger is plugged at both ends.

  Any suggestions?

  Thank you.

  Ken Isaacson
  

  KJIsaacson,
  As long as the mouse still works normally and is in charge, so it's nothing to worry about.  Probably the LED went wrong but which would not affect the operation, he is only there as an indicator for you do know that the load.  If the unit stops to load then do it repaired / replaced.

  Let us know if you need more assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• pointer is not displayed for Microsoft Laser mouse 7000

  Original title: Microsoft Laser mouse 7000... pointer is not displayed?

  Mouse Microsoft Laser 7000 used on HP laptop. Pointer icon has disappeared from the overnight! What is a computer or mouse problem? How can I fix it? DWH

  Hi DarrylHartung,

  I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if it helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  You can also view the article mentioned below and follow the steps to solve the problem:

  IntelliMouse pointer responds slowly or not at all

  http://support.Microsoft.com/kb/259039

  I hope this helps!

• MS Wireless Laser Mouse 6000. When I test of arrow to scroll/bounce backwards and forwards

  I have a MS Wireless Laser Mouse 6000. For a while it was fantastic, but now, everytime I try the / arrow scrolling through columns of docs, images or e-mail items moved with the cursor (on the side or on the bottom) begins to bounce back and forward and points of view moving vertically (or left and right uncontrollable.) To increase the frustration, sometimes things work normally for a short period before the fun begins. When I change to a basic mouse (USB) there are no more problems! : O Tony

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Microsoft Wireless Laser Mouse/Keyboard Version 2.0/3.0

  Hello!

  I was wondering if I can use my v2.0 USB Microsoft 2.4 GHz TRANSCEIVER that works for my keyboard Microsoft Wireless Laser V3.0 and my Microsoft Wireless Laser mouse V2.0 work for my other keyboard and mouse because I lost the transmitter/wireless receiver I had to for use. Anyway, the keyboard is called: Microsoft Wireless Laser Keyboard 6000 v2.0 and mouse is called: Microsoft Wireless Laser Mouse 6000 (there is no version on that). Also, if I can't use the USB with my keyboard and mouse, I was wondering if someone could fix my mouse? My mouse will not move. I move the mouse and my clicker or this thing won't pass. And then sometimes I can just click on it! Please help on these two problems. Thank you very much!!! (:

  Hello

  For Microsoft hardware related issues, you can have a look at this link:

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

• Microsoft wireless laser mouse 8000__

  I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

  I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

  Hello

  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=084

  battery empty? or not connected? DoD you have intellipoint 7?

  have a nice day [url] [color = blue] www.microsoft.com/security download and install updates from Microsoft Update security! [/ Color] [url] [url] http://windows.microsoft.com/en-US/windows-vista/help/using [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.windowslive.com/HowItWorks [color = green] how to use Windows Live [/ color] [url] [url] [color = blue] http://windows.microsoft.com/en-US/windows/help Windows Help & how-to [/ color] [url] [url] http://windows.microsoft.com/en-us/windows-vista/help/top-solutions [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.microsoft.com/windows/internet-explorer/default.aspx [color = green] Internet Explorer 8 : Homepage [/ color] [url] [url] http://windows.microsoft.com/en-US/windows/help/internet-explorer?browser=ie8 [color = blue] Internet Explorer Help home [/ color] [url]