Problem LRT224 Port Range Forwarding

Similar Questions

• WRT54GL Port Range Forwarding?

  Hello. In Port Range Forwarding, there are only 10 lines (konfigurating 10 different ports.). What happens if you need to pass more than 10 ports?

  Installation of the 3rd firmware like dd - wrt or tomato.
  Of course, you should not need so many expeditions in the first instance.

• HowTo: Define and provide a personalized service with disjoint / port range.

  I have a rv180 and I'm trying to implement a custom service that contains multiple ports two disjoint (some UDP some TCP), as well as a range of TCP ports. This has lead me to a few questions.

  (1) is it still possible to have a unique personalized service with disjoint ports? He'll just have to set several partial service for this?

  (2) is it possible to forward a port range? How to define a service with a range of ports, it is clear, but port forwarding interface table only allows me to select a LAN port side for any service. Is there a secret notation that I do here which will be just forward to the same port LAN side as port WAN-side - NAT effectively a transfer, but just for the selected service?

  Thank you

  Luke

  Hi Luke,.

  (1) Unfortunately, it seems that you have to implement services customized for each set of disjoint ports and then create rules of transfer for each custom port.

  (2) I'm not 100% sure that I follow your question, but I think I got the essential. Port forwarding will forward traffic on the specific port (service) of your wan IP public designated private IP (destination IP) address. You can restrict the access of calendar or IP ('source to users' - by the host or the beach). Because looks like you have several customized services, you must create a configuration for each service of port forwarding.

  I hope this helps.

  Best,

  David

  Please evaluate the useful messages.

• Having problems with ports USB 3.0 in computer option H8 - 1010 T

  Well, I bought the option USB 3.0 ports on top of the computer on the computer mentioned in the Thread object and I have problems with them.

  I tried plugging USB 2.0 devices in these two ports to "test" to see if they work, yet I am not able to get them to work with USB 2.0 devices. USB 2.0 is not compatible with USB 3.0 ports? Or I'm doing something other 'evil' here?

  Unfortunately, I do not have a USB 3.0 device to plug USB 3.0 ports to make sure that it is certainly a problem with ports still.

  The device in question I've tried in the USB 3.0 ports is a Microsoft Wireless Mouse 6000 wireless receiver. If the ports are not connected correctly, I would have assumed that the wireless receiver would have "blown" when I plugged it in, but it still works very well.

  USB 2.0 devices are not compatible with USB 3.0 ports? I know that USB 3.0 devices are backward compatible with USB 2.0 ports (I have a friend who is in this situation), but I also thought that the opposite was supposed to be true as well. Am I wrong?

  @William

  Check out this thread, seems to be the same problem you are having.

  http://h30434.www3.HP.com/T5/desktop-hardware/USB-3-0-ports-on-Pavilion-HP8-1070t-not-working/m-p/792857/highlight/true#M35248

• Internet access problem no problems Out Of Range

  Hello

  I have some problems with the computer at the laboratory of computer science at the school.
  I had fixed the elimination of the problems of the range with starting pc mode vga but how to solve this problem, so it can boot normally without pressing f8?
  After that I had signed, I can't access the internet even if the parameters are normal and the other computers connect to the internet.
  Please fix this!

  Hello

  1 did you do changes on the computer before the show?

  2. What is the full error message that you receive on out of range problems?

  Method 1:

  See the site:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Run the fixit in normal mode and check.

  Method 2:

  Check if the problem persists in safe mode with network. If the problem does not persist in SafeMode with network check if the problem persists in the boot.

  Step 1: Safe Mode with networking

  Networking in safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  See the site:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Step 2: Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

• QOS port ranges

  I want to give priority to League of Legends, a game that uses the ports of between 5000-5500. Does the WRT54GL section "Demand priority" to port ranges. If Yes, I put the range in properly.

  You can't port ranges for this type of QoS. Do priority or priority of Ethernet Device instead. The last Routers Wifi Smart of Linksys has for a prioritization of media feature which includes options to set the priority for online games. There same League of Legends as one of the games on the list by default, so that you can choose to set the priority.

• Problem with port 20 on ProCurve 2910al - 48G - POE

  I recently sent 5 x ProCurve 2910al - 48G - POE switches connected to 2 x ProCurve 5412zl.  I have a problem that port 20 does not seem to work on all 5 predisposees.  What is a config problem?

  We had the same problem

  We have upgraded to the latest version of 14.38 and seems resolved.

  probably wasn't available when you had the problem

• LRT224 Port forwarding of specific Port

  Is it possible with this router to do port forwarding on a specific port to a pc?

  I have a basic need:

  Transfer the incoming request to WAN port 37777 to RDP port 3389 to the local server xxx.xxx.xxx.xxx.

  I try to do a formward configured like this:

  Service: 37777 (custom)-37777

  IP address: XXX.XXX.XXX.XXX:3389

  But I can't save this configuration (wghite page is displayed).

  How can I access with RDP on my public IP address on a specific (not the standard 3389), the port of my business and be sent to a specific server?

  for example: RDP at yyy.yyy.yyy.yyy:37777 connects to the server local xxx.xxx.xxx.xxx

  So far, I can only access this server with rdp standard port on the public ip address.

  Thank you

  The LRT224 supports the translation of address of Port (PAT). With PAT, each computer on the LAN is translated at the same IP address, but with a different port number assignment.

• Problem with Port Forwarding (When PPTP is upward) in the WRT-160N

  Hello world!

  I'm looking for more help with Port Forwarding in my new Linksys router. I bought the daysago afew router and was pretty surprised when I discovered that there is no DD - WRT firmware is installed in it (the router was 100% NEW when I bought it). I downloaded latest firmware original and flashed Linksys file successfully.

  But I still have the problem (even that I was on DD - WRT firmware too) with the port forwarding for my DC ++ and Vuze (app from torrents): I wrote port forward for ports 49151 (for Vuze) and 4000 (for DC ++) to pass on to my desktop computer (IP 192.168.1.201) - I saw a post on this forum, that there could be a problem If you transfer to an IP address, which is within the local area of DHCP, so I forwarded to IP.201 (my local DHCPzone is 192.168.1.100-. 149) But does not forwardind (())

  What's wrong?

  My configuration:

  Router IP: 192.168.1.1

  PPTP (I my ISP)

  IP address: 192.168.226.127

  Default gateway: 192.168.226.2

  DNS 1: 192.168.1.1

  2 & 3 DNS: 0.0.0.0

  The IP address of the PPTP server: 192.168.226.2

  User name: *.

  Password: *.

  _____________________

  Simple Port Forwarding:

  Name of the external port application port internal protocol for IP address Enabled

  Vuze 49151 49151 times checked 192.168.1.201

  DC 4000 4000 checked two 192.168.1.201

  As you mentioned in your post that your ISP has provided you with a PPTP connection with an IP address: 192.x.x.x. The IP address that is provided by your ISP is in a private beach, and if you try to transfer all the ports on your router, it will not work, as long as your ISP modem is blocking this port. If you need get a public IP address from your ISP.

  As you get Private IP of your ISP, if this connection is called as NAT behind NAT and your Modem behaves like a router.

  So now you have 2 options, get the public IP address from your ISP or change the type of connection.

• Nighthawk R8000 - problems of Port - frustrated to a task as simple forwarding

  Talk about wasting time for a simple task like Port forwarding:

  Goal: Establish an external absolutely Minecraft Server

  Equipment:

  -MC Server: Mac Mini (current run successfully) Firewall works not

  -NH R8000 router

  -SB6141 Modem (modem is a straight passthrough; no FW)

  -TWC Internet service

  Created the Service customized according to the router:

  -Port forward internal port 25565 against the servers IP address 192.168.1.X

  Accessible "few" network.

  Canyouseeme.org does not see as open port

  Test:

  -Server connected directly to the Modem

  -Port found as open; Successful connected externally to the MC Server

  -Validation that TWC is NOT blocking this port

  Fell network and still no luck.

  Has been the latest firmware. but seen a post from someone at NG who suggested to someone else to downgrade. Did to v 1.0.2.46_1.0.97

  -Results: No chance

  Also tried to adjust the filtering NAT to open

  So in addition to getting rid of this router. What to do next?

  RESOLVED:

  -One more piece of hardware that is not listed. Vonage modem. The Installer did after the modem but before the router. This affected the external IP and more that probably caused the blocked port.

  S ' installed behind the router and the port is working now.

  -Just need to finalize the Vonage settings change, but it is secondary to get the MC server running. : 0

• Problems with porting boost::regex when ranging from CS6 to CC2014 using Xcode

  I have a job in CS6 project which uses the framework boost::regex I have porting problems in CC2014.

  I wore this project using Dolly to create a new project, and then face the old files source overall, finally update the output of various dated calls to API InDesign that appeared when I compiled. For the use of regular expressions, I added the debug and release builds of the boost_regex.framework to the respective targets.

  Now, for the version new projects of CC2014 debug builds with happiness. But when I switch to the Release version I get some errors from the linker. They all have something like:

  Undefined symbols for x86_64 architecture:

  'boost::re_detail::get_mem_block()', referenced from:

  Boost::re_details:perl_matcher < __gnu_cxx::__normal_iterator < const char *, std::string >, std::allocator < boost::sub_match < __gnu_cxx::__normal_iterator < const char *, std::string > > >, < char, < char > boost::cpp_regex_traits > boost::regex:regex_traits >: find_imp() in SbRegex.o

  etc.

  I did a bit of reading through the impetus of header files. The strange thing is that the 'get_mem_block()' seems to be set for option pre processor BOOST_REGEX_NON_RECURSIVE, while in the project contains parameters for BOOST_PREPROCESSOR_DEFINITIONS BOOST_REGEX_RECURSIVE. These two parameters are mutually exclusive, and it is logical to preprocessor that blocks with both cases, defined both.

  This recursive option is used to control the use of memory when processing a regular expression, then see a call get_mem_block() (other errors of link imply a call to put_mem_block) somehow made sense being called that look like something to do with memory.

  I'm trying to understand why the debug builds, but Release version fails. This problem sound familiar to anyone? Anyone have any suggestions to try to fix it?

  Figured out how to build the project when you add the framework for regular expression of thrust.

  The key is the optimization level. When Dolly creates a project it defines the level of optimization for the Release version of "-O3". When you use boost::regex, you can only link correctly if you use the O0 and O1 optimization levels. Highest and link errors I saw appear.

  For the Release version, so I put in the Release_Cocoa64 build parameters 'Optimization level' to ' Fast [-O, O1] ' and it compiles.

• Help to port RV042 forwarding

  Hi and thanks for reading this. My VPN router works well but I just need to make sure that port 8443 is forwarded so that my customers from outside my office/domain can access my Web server to generate reports. I have already connected to my router and entered my IP address of the web server with the port enabled in the port forwarding section range. It is said: secondary https [tcp/8443 ~ 8443]-> 192.168.xx.x

  It is activated and I saved the day. Everyone in my office and the server can display this site very well but can my clients outdoors. What gives? I really try hard to understand but I have developed with nothing. Any help is greatly appreciated.

  Hi niospecv and welcome to the homepage of Cisco community!

  The RV042 now reports to the Cisco Small Business Support Community.

  For discussions concerning this product, please go here.

• Satellite Pro L10 problem with Ports COM/Hyperterminal & Bluetooth

  Hello
  I have the following problems with the above machine:

  (1) I have attached an external series COM port to the machine. However, I can not connect to the COM Port using Hyperterminal.
  (2) I installed a Bluetooth USB adapter, but I can't view the protocol configuration.

  Each of the above works perfectly with another laptop that doesn't have a Bluetooth or even a network card.

  Everyone has experienced similar problems. I use WinXP SP2.

  Thank you

  MC

  Hello

  1, in which is the external COM port connected? Is detected in a straight path in Device Manager? What is the error msg to Hyperterminal?
  When connected via PCMCIA, try to change the settings for PCMCIA slot in the BIOS!

  2, try to reinstall the Toshiba Bluetooth stack! There may be some problems. The MS Bluetooth stack does not work properly with the Toshiba devices and one of the earlier Toshiba Bluetooth stack is not signed by Windows XP Service Pack 2!

  Hans Bye

• Toshiba Tecra A3 - problem with Port Replikator III

  Hello

  I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

  any help is much appreciated
  Thank you
  Mario

  Hello

  As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

  Good bye

• Qosmio G10: problem with Port Monitor

  Hi all

  I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.

  where I go wrong?

  Thanks in advance.

  Hello
  you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
  choose s-video and monitor-in.

  Good bye