Nighthawk R8000 - problems of Port - frustrated to a task as simple forwarding

Similar Questions

• Having problems with ports USB 3.0 in computer option H8 - 1010 T

  Well, I bought the option USB 3.0 ports on top of the computer on the computer mentioned in the Thread object and I have problems with them.

  I tried plugging USB 2.0 devices in these two ports to "test" to see if they work, yet I am not able to get them to work with USB 2.0 devices. USB 2.0 is not compatible with USB 3.0 ports? Or I'm doing something other 'evil' here?

  Unfortunately, I do not have a USB 3.0 device to plug USB 3.0 ports to make sure that it is certainly a problem with ports still.

  The device in question I've tried in the USB 3.0 ports is a Microsoft Wireless Mouse 6000 wireless receiver. If the ports are not connected correctly, I would have assumed that the wireless receiver would have "blown" when I plugged it in, but it still works very well.

  USB 2.0 devices are not compatible with USB 3.0 ports? I know that USB 3.0 devices are backward compatible with USB 2.0 ports (I have a friend who is in this situation), but I also thought that the opposite was supposed to be true as well. Am I wrong?

  @William

  Check out this thread, seems to be the same problem you are having.

  http://h30434.www3.HP.com/T5/desktop-hardware/USB-3-0-ports-on-Pavilion-HP8-1070t-not-working/m-p/792857/highlight/true#M35248

• Problem with port 20 on ProCurve 2910al - 48G - POE

  I recently sent 5 x ProCurve 2910al - 48G - POE switches connected to 2 x ProCurve 5412zl.  I have a problem that port 20 does not seem to work on all 5 predisposees.  What is a config problem?

  We had the same problem

  We have upgraded to the latest version of 14.38 and seems resolved.

  probably wasn't available when you had the problem

• Nighthawk R8000 to Virgin Media Super Hub 2 connection problem.

  My R8000 does not connect to the hub super Virgin Media 1.0 Gbps. I have a line across the R8000 and 150 meg, I get only 96 Mbps.

  My LAN is defined as follows:

  Speed = 1.0 Gbps.

  I made the default settings and that it has not cured the problem.

  If I connect the VM 2 super hub directly to my PC I get 158,2 Mbps when the speed of local area periphery is 1.0 Gbps

  I'm on Windows 10

  When it is connected to the VM via Wifi hub, I get 157 Mbit/s on the % line GHz.

  Any suggestions on how to get this sort would be very usfulll

  OK I'll look into that. Thanks again.

• Satellite Pro L10 problem with Ports COM/Hyperterminal & Bluetooth

  Hello
  I have the following problems with the above machine:

  (1) I have attached an external series COM port to the machine. However, I can not connect to the COM Port using Hyperterminal.
  (2) I installed a Bluetooth USB adapter, but I can't view the protocol configuration.

  Each of the above works perfectly with another laptop that doesn't have a Bluetooth or even a network card.

  Everyone has experienced similar problems. I use WinXP SP2.

  Thank you

  MC

  Hello

  1, in which is the external COM port connected? Is detected in a straight path in Device Manager? What is the error msg to Hyperterminal?
  When connected via PCMCIA, try to change the settings for PCMCIA slot in the BIOS!

  2, try to reinstall the Toshiba Bluetooth stack! There may be some problems. The MS Bluetooth stack does not work properly with the Toshiba devices and one of the earlier Toshiba Bluetooth stack is not signed by Windows XP Service Pack 2!

  Hans Bye

• Toshiba Tecra A3 - problem with Port Replikator III

  Hello

  I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

  any help is much appreciated
  Thank you
  Mario

  Hello

  As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

  Good bye

• Qosmio G10: problem with Port Monitor

  Hi all

  I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.

  where I go wrong?

  Thanks in advance.

  Hello
  you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
  choose s-video and monitor-in.

  Good bye

• Strange problem with ports USB on my Satellite A300-243

  Hello

  I have the following problem. So far, I have 4 USB ports, and only my USB key and key to my friend works there. All other USB keys (I tried mby 20 different ones) does not work: aks for, pilot research, etc...

  I spent many hours together in the internet search, but I didn t find a USB driver, but I don't even know what I'm looking for. So please, I would be very happy if someone could help me with this.
  And I forgot: other devices do not work too. I use it y of the mouse, but it only works in the USB port on the left. Safely, he asks for driver...

  Thanks in advance.

  Hello

  Normally you n t need a driver for USB. On XP, Vista and Windows 7 the stick will be automatically installed and no driver is no longer necessary.

  Can you please tell us what OS you are using? This happens with the factory settings or you have installed another OS?
  You should try with the factory settings and update the chipset driver. You can find it on the Toshiba site. In addition, updating the BIOS could also be helpful.

• Re: Satellite L300D-242 - multiple problems, usb ports, some keys on the keyboard

  Hello

  I'm having some problems with my computer laptop sateliite, everything worked fine until I changed the operating system from windows vista to windows 7 and now my USB ports arnt working, sometimes they work and sometimes they are not but its never the same one that works he constantly of the changes, also on my keyboard the game Skip, stop, mute buttons have stopped working.

  Can someone help me please?

  Thank you

  Hello

  To get to play, pause and other buttons works, you need to install the VAP (value added package).

  The USB ports are controlled by the chipset, so I recommend you to install the chipset driver to get this resolved.

  I hope this helps a little

• Nighthawk meets the 42443 port 7000

  My nighthawk meets the connection to port 42443.

  I don't know what it is.

  When I tried in the future, the port has had effect 0.

  When I tried to BLOCK the port - router says I can't until it is used.

  What is this PORT? How can I disable it?

  Telnet XX. XX. XX. XX 42443
  Try the XX. XX. XX. XX...
  Connected to XX. XX. XX. XX.
  [Escape character is ' ^]'.

  Connection closed by foreign host.

  Its clearly answered him... Not good...

  Some external scanner said I do not have the analysis due to this port.

  I think I have the latest firmware running.

  How can I disable this port?

  Thank you

  Jerry

  Hi all

  42443 port is used by the Kwlit function.

  It can be closed by disabling the DLNA.

• How can I connect my Nighthawk R8000 X 6 wireless (no cable) to another wireless router?

  I'm trying to connect my R8000 Nighthawk X 6 to a different router, I have downstairs, but I need you to connect wireless because I don't have a cable running towards him. I can't find the right options on the admin INTERFACE. Can anyone help?

  You can purchase some powerline connectors and connect the R8000 as Point to access your main router. Better than nothing...

• Problem LRT224 Port Range Forwarding

  Hello

  I have a new router Linksys LRT224 Dual WAN Gigabit. I want to allow traffic to be analyzed on port 9100.

  Connection accepted TCP 91.102.93.5:63261-> 192.168.0. 48:9100 on eth0

  I understand that it has accepted my request on port 9100 and sent to the 92.168.0.48:9100.

  But nothing happens. When I telnet to 192.168.0.48 9100 inside this works if the printer seems to work fine.

  OK, I found the problem. And it wasn't the LRT224. After reset of the printer, I worked :-)

• Problems with ports ethernet E4200

  I have problems with my ethernet ports on my router E4200 V1.  I do not get on flow rate of 12 Mbps on a single connected wired computer.  If I replace it with a simple switch 5 port I get 60 Mbit/s using the same cables.  I looked through the creation and cannot come up with any solution.

  Any help would be greatly appreciated.

  Thank you

  Mike

  OK I tore across the network.  Started from scratch and found the problem.  It is quite strange, but everything works fine!

  I discovered through the process of elimination that the cisco router did not like my Panamax Lan UTP.  Cisco is apparently more strict with the signal than the simple switch or refurbished netgear router.  I had the protection on the power strip 6 Max near the iMac.  The totally weird part is that slowed down the entire network.  Streaming is now pending on 60Mbps at each connection to the local network.

  Thank you all for your time I walked through this weird problem.

  Mike

• Problem with port for network WRT400

  I connect via a network cable to one of the four network ports and to talk to the router 192.168.1.1 but I have no internet.

  The part on an ipod wireless works.  I tried a USB wireless, and she constantly connected then disconnected.

  I tried another port, network card drivers update, reset the router, pedaled power, the firmware is the most updated version.

  I'm using windows 7, I had a very similar problem, turn on the PC without internet connection, I disable it and tell it to solve the problem, and when he returned, internet worked.  Now the problem is constant and cannot be repaired this way.

  I installed the network card driver when the problem is intermittent, and it fixed so far.

  At present, this seems to be a computer problem, so you might try completely uninstalling the driver and install it again? I guess no one is using the functionality of the router Internet acres restrictions to limit the correct Internet connectivity?

• Problem with Port Forwarding (When PPTP is upward) in the WRT-160N

  Hello world!

  I'm looking for more help with Port Forwarding in my new Linksys router. I bought the daysago afew router and was pretty surprised when I discovered that there is no DD - WRT firmware is installed in it (the router was 100% NEW when I bought it). I downloaded latest firmware original and flashed Linksys file successfully.

  But I still have the problem (even that I was on DD - WRT firmware too) with the port forwarding for my DC ++ and Vuze (app from torrents): I wrote port forward for ports 49151 (for Vuze) and 4000 (for DC ++) to pass on to my desktop computer (IP 192.168.1.201) - I saw a post on this forum, that there could be a problem If you transfer to an IP address, which is within the local area of DHCP, so I forwarded to IP.201 (my local DHCPzone is 192.168.1.100-. 149) But does not forwardind (())

  What's wrong?

  My configuration:

  Router IP: 192.168.1.1

  PPTP (I my ISP)

  IP address: 192.168.226.127

  Default gateway: 192.168.226.2

  DNS 1: 192.168.1.1

  2 & 3 DNS: 0.0.0.0

  The IP address of the PPTP server: 192.168.226.2

  User name: *.

  Password: *.

  _____________________

  Simple Port Forwarding:

  Name of the external port application port internal protocol for IP address Enabled

  Vuze 49151 49151 times checked 192.168.1.201

  DC 4000 4000 checked two 192.168.1.201

  As you mentioned in your post that your ISP has provided you with a PPTP connection with an IP address: 192.x.x.x. The IP address that is provided by your ISP is in a private beach, and if you try to transfer all the ports on your router, it will not work, as long as your ISP modem is blocking this port. If you need get a public IP address from your ISP.

  As you get Private IP of your ISP, if this connection is called as NAT behind NAT and your Modem behaves like a router.

  So now you have 2 options, get the public IP address from your ISP or change the type of connection.