Windows 8: problem with NIC (marvell yukon 88e8042 pci - e fast ethernet)

Similar Questions

• Hello world!!! I have a problem on my Marvell Yukon 88E8042 PCI-E Fast Ethernet Controller.

  Hello world!!! I have a problem on my Marvell Yukon 88E8042 PCI-E Fast Ethernet Controller. He refuses to detect the RJ-45 cable, I plugged, the problem starts today.

  I have HP 6735 s with Win 7 holiday.

  I need your help.

  Thank you!!!

  Have you uninstalled the device in the age DManager and then reinstalled the driver yet?

• Problem Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller 32-bit driver

  Question: some time in large files (about 500 MB or more) copy through network doesn´t work well, sometimes when downloading large files.

  Hello, I have contact to report a network adapter driver that already comes with Windows 8, issue in general the NIC works fine, but when I do a simple copy, paste to a file through my network, I noticed that sometimes the file is not copied correctly, completely, it copies the entire without any error file but when I try to check or to open the file It gives me an error of invalid file, I know that everything else is fine because I can do same copies via other systems of exploitation without any errors on the files.

  Windows: Windows 8 32-bit Enterprise

  Nework Driver: Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller

  Driver provider: Microsoft
  Driver date: 23/02/2012
  Driver version: 12.0.9.4
  Digital signer: Microsoft Windows

  Hardware ID:

  PCI\VEN_11AB & DEV_4351 & SUBSYS_81E6104D & REV_15
  PCI\VEN_11AB & DEV_4351 & SUBSYS_81E6104D
  PCI\VEN_11AB & DEV_4351 & CC_020000
  PCI\VEN_11AB & DEV_4351 & CC_0200

  Thank you for your attention.

  Solved!
  I managed a way to force the network adapter maker (Marvell) installation (Windows 7 and Server 2008 R2 32 - BIT driver) and apparently it s works very well. ;-)
  http://www.Marvell.com/support/downloads/driverDownload.do?driverId=206&action=1
  However, I believe that it is in fact a kind of a problem with the drivers that came with windows 8.
  All medium tank much Palcouk. :-)

• Marvell yukon 88e8040 pci - e fast ethernet controller does not

  Hi I have a dell inspiron 1750 that I love to bits and recently put a new drive hard and files recovered, but the above problem keeps arising and does not allow me to connect by ethernet or wireless. Please help guys

  If you have installed a new hard drive and reinstall vista, you need to reinstall your drivers. Many drivers may be missing. Go to Device Manager and see what drivers you need:

  Access the Dell Support and enter your Service tag (drivers)
  http://www.Dell.com/support/home/us/en/19?c=us&l=en&s=DHS

  Marvell Driver Downloads
  http://www.Dell.com/support/home/us/en/19?c=us&l=en&s=DHS

  Choose your platform and enter the partnumber.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Windows 7, problem with update

  I am facing the problem with the release of windows 7, it shows the error code 80070570 and 800 b 0100.
  I can't find a solution, how to address this issue.

  Hello

  How to fix update error 800b0100 Vista (and Windows 7)
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Restart after that a windows update problem with VirusScan from McAfee (total Protection)

  I'm under 64-bit Windows VISTA Home Premium SP 1 on a Dell Studio 540 desktop.  8.0 GB RAM.  Intel Core 2 Quad Q9400 CPU @ 2 .66GHz.
  Late last night, I started the PC to go online.  Shortly after, I was invited by Windows update to restart.  So I closed off everything and rebooted, except that I kept scheduled analysis of McAfee, which I set up for Fridays.  I have McAfee Total Protection, which includes VirusScan.  That the PC would shut down, there was a message on the screen of McAfee who said, essentially, stop this scan before restarting.  I'm paraphrasing - I didn't write down the exact message.  After reboot, I started again the background anti-virus scanning.  After a few minutes, I received the following message:
  Microsoft Windows
  Order McAfee VirusScan Scan - Are asked to work and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.
  I have not received a solution of Windows.  I completely uninstalled McAfee Total Protection, following the instructions of McAfee, then reinstalled.  Everything went very well with these processes.  I have yet to receive an indication of the McAfee software that something is wrong.  After the reinstallation, I tried a scan, but got the same error message as above after a few minutes.  It does not occur immediately, analysis continues for about 5 minutes, then abandoned.
  Chatted with Dell today.  They suggested a system restore, I will try then.

  What updates have been installed?

  During certain infections that are designed to defeat security software will cause the bomb on analyses with an error.

  I also suggest you contact the McAfee Support since it is their product which blocks.  http://service.McAfee.com/TechSupportHome.aspx?LC=1033&SG=TS

  To view installed updates:

  1. click on start > Control Panel > Classic view > Windows Update.

  2. along the top, click view update history.

  3. click on installed updates

  4. you can sort by name, status, Type, or Date updates. You can also click on each update and select Show details to access the details of this update.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• Windows 7, problem with the game

  Problem with the game Mu Online WebZen. This match started Web site. During the starstu is projected an error 1003-0
  screenshot: http://img266.imageshack.us/img266/6053/beztytuuboq.jpg
  The problem is in the decoding of the code GameGuard. I try everything, maybe update IE?

  Sorry for my English :/ I only test Windows Seven, I try to help detect the system problems.

  Hi Szogun,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is due to a problem with advanced user and would be better suited to the Windows 7 Technet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro?ITPID=sprblog

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows vista problems with message hotmail hotmail was not able to complete this form

  When I click on NEW to new email in Hotmail, I get a message from Microsoft, "Windows Live Hotmail was not able to complete this

  request.  Microsoft may contact you about problems that report you. "I can receive emails, etc..  can not change the font or point size of police or fat, etc.

  Hi Mike,.

  Since you are facing problems with Windows Live mail, you can view the query in the Windows Live Forum for assistance.

  Windows Live Support

  For more information, refer to the following links:

  http://windowslivehelp.com/searchresults.aspx?query=Windows%20Live%20Hotmail%20Was%20not%20able%20To%20complete%20this%20&ProductID=1

  http://windowslivehelp.com/searchresults.aspx?query=hange%20font%20or%20font%20size%20or%20bold&ProductID=1

• Windows 8 problem with a driver

  I have a HP pavilion dv6t with windows 8, I have a problem with a driver to unrecognize, please someone help me

  Here is the screenshot

  

  Hello:

  You must install this driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-109882-1&mode=4&IDX=0&prodTypeId=321957&prodSeriesId=3688868

  Paul

• Windows 7 problem with Kodak scanner i2420 - software Smarttouch

  Hello, someone had a problem with this kind of scan? On my desktop, there is a problem with smart touch, whenever I scan I have to restart or relog into a computer one then try again... Sometimes it works for a few hours, but sometimes I scan 1 or 2 pages and then stops scanning... The driver must have the connection, because there the scannner is a green arrow for connections... My computer is a HP and windos 7 Pro is instaled. I have checked the event viewer, but found nothing... I disabled the antivirus protection, but the problem is he stil... I know that this is not the right forum, I don't end protected by a kind of kodak support forum or something, maybe someone faced this problem?

  Thank you for your answer.e

  Hello

  Yes, you are right that this is not the right forum to ask about Scanner Kodak. If you were not able to find any support for Kodak forum so here are two links that might help you to achieve them and find answers to your questions.

  For the KODAK consumer product support

  Kodak FAQ

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Windows 7 problem with playback flash memory

  Hello!

  I have a problem with my computer. It cannot read any flash memory except two memory cards I've used before on the same computer and my external hard drive. When I put any other (new) flash memory I don't see any information in this respect. It's as if there is no memory flash. Only what I hear when I put it, it's just a noise and nothing else. How it can be fixed? I use Windows 7.

  Kind regards!

  Conner

  Hello Bilija,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of the problem, it seems that you can not use any other card two memory and your external drive.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Have you tried the flash player which does not work on this computer to another computer? Same or different, has been the result?
  2. Have you tried different USB ports to connect the device? Has been the result even?
  3. Do you receive a specific error message/code?
  4. What is the brand and model of your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  If the problem persists, try to run the hardware and devices Troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3

  According to the description of the problem, it seems that the issue could be due to USB drivers, if they are not updated, so I suggest you to update the drivers and check if it helps.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows/update-drivers-recommended-links#update-drivers-recommended-links=Windows-7

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Windows 7 problems with gel applications, programs stop working until you restart

  Windows 7 is a stupid IDEA! . Since then, I have installed windows 7 64-bit on my 64-bit machine. I had problems. Programs to decide that they will not open until I restart. IE and Firefox both freeze when all Web sites are trying to load a video. Also other programs will just stop working and turn off while they don't reopen until I restart again. I installed 7 as an upgrade not a clean install, I'm not sure how to go about backup up files for that. I'm also extremely ready to roll back to Vista, I have not had ANY problems with him. I am also about to throw my laptop through a wall with windows 7 and microsoft. Thank you for another piece of trash! (and headaches). With all that money, you would think they can actually DO SOMETHING RIGHT!. I have now lost $120 on garbage, might as well use windows 7 CD as a Brawler of ice this winter.

  PS everyone has ideas?

  TechBuff48

  Rants are part of the dealing with technology. As long as they are against the technical and personal equipment no technical, I think we've all been there. Ironically, two days after my message praising Win7, I had a spontaneous reboot that seems to be associated with a known issue with the sensitivity of kernel-power. I was able to reproduce twice, so I think I have a work around until the bug is addressed.

  OK, back on topic. If you have a version to the retail/TMC, you should be able to perform a clean installation with the option to format the drive; then, the fun of reloading everything from scratch and to restore from a backup. I'm not promoting a particular site, but this one

  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp
  or
  http://community.winsupersite.com/blogs/Paul/archive/2009/10/23/clean-install-Windows-7-with-upgrade-media-the-answer.aspx
  or
  http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html
  or
  http://answers.Yahoo.com/question/index?QID=20091022164612AAAJ4kM

  There are also other tools available to start from a CD or a DVD and then format the drive in NTFS, reinstall it from scratch. But you must have a DVD very convenient for loading eligible upgrade then Win 7.

  Good luck!

  MisterWeather

• Windows 7-problems with the laptop computer's System32 folder

  I bought this brand new Acer Aspire 5251-1005 computer laptop a week ago from Best Buy and it comes pre-installed with Windows 7. Everything went beautifully except for an unknown problem. A guy organized, I have some of my important programs pinned on my taskbar (for example, MSN, office, Skype etc.). However, when I right click in a program (ie. MSN) and click on a task (IE. Mail box), this task is not activate Instead, my System32 folder opens... Very weird.

  I searched on several forums. I tried to do a system restore (quite a pain to reinstall everything) and did not work. Tried to activate my guest account to check if my account is corrupted. This was not the case.

  If anyone has a solution (hopefully one that doesn't require too many steps) Please help me!

  I had the same problem with ACER 5251-1513, and it turns out to be a third trial that Shredder calledEgis Tec included with MyWinlocker suite program.

  After you have uninstalled Egis Tec Shredder, the system is returned to normal.

• Windows 7 problem with closed captions.

  Hello.
  I had a problem with my Windows 7 subtitles.
  When I opened a fail .avi via Windows Media Player, Media Player Classic, BS Player, subtitles are not Bulgarian (I am Bulgarian), instead in a strange language.
  I downloaded VobSub - still the same.
  When I download an anime adaptation of some sort, subtitles are in English and not on a weird language.
  Please help me.

  I have VLC media player and has had a problem with Russian subtitles. I have changes in the encoding preferences: Cyrillic subtitles and it's all good! Velislav thanks!