problem; No secondray of ip address allowed on PIX

Similar Questions

• Problems to export lists of addresses to CSV format (not all addresses are exportationdonnees, getting corrupted)

  I export a list of in my address book, but the data that are incompatible. Some of the names/emails export OK, but overall list, there are some documents that seem just crazy (I mean the data just wind in the fields hurt at random, some documents do not seem to export at all, etc.). I have a list of about 1 400 contacts, but only about 1,000 of them export in the correct fields.

  I brought the CSV file in Excel and tried to clean it, but I see that there still will do a lot of missing documents. I suspect that this is because there must be some long strings (or non-compliant characters) in some of the comments fields (which have been copied to a people of a completed form when they are added to my list). I'm trying to export it so that I can pass it to a commercial e-mail as MailChimp service.

  Does anyone have experience with this?

  Then try an export of the difference, as delimited by tabs. Excel also opens easier than commas and it is unlikely that your file will be incorporated tabs. At least I hope so.

  In the future, you might want to clean up garbage on the web before you import it into Thunderbird, or any other program.

  BTW email me will get all information on the Mail Chimp. They cannot report on those who allow remote images, but light on detail, there are marketing information.

• Problems with different e-mail addresses and the different Apple ID

  Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do.

  First a primer on my Apple ID

  ***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.).

  ***@losmail.no - my iTunes/App account (purchase and download music, app, etc..)

  ***@me.com: I have no problem connecting to this account (appleid.apple.com, iCloud.com etc etc..)

  ***@losmail.no: I have no problem connecting to this account in iTunes/App Store. However, I can not connect on appleid.apple.com with this account because he asked me to check the email address. However, this e-mail address use a messaging service that doesn't work anymore, so I can't check it out. Because it is a private messaging service, I want to change the Apple ID on my account @gmail.com.

  I believe, however, that the account @gmail.com has been connected to the account @losmail.no because I received my shopping etc. of my account @losmail.no sent to ***@gmail.com. These recipes also "Apple ID: * @gmail.com. When I connect to the account, however, use ***@losmail.no. However, an I said, I want to log on by using ***@gmail.com.

  What is strange is that in iTunes / App Store, I can connect with ***@gmail.com. However, this is not the same account as ***@losmail.noand previous purchases / comments etc. are not available. It's strange because said revenues (Ref. above).

  An other ting that indicates that the Apple ID where I use ***@losmail.no once was connected to ***@gmail.com, is what happens when I try to log in to ***@gmail.com to appleid.apple.com. Then, I get a message saying that the e-mail address must be verified. I can write the code sent to the ***@gmaiI.com, but it is said then that this e-mail address is already is used by another Apple ID, so it cannot be verified.

  So I guess my question is, basically, how I can change the ID of the ***@losmail.no to ***@gmail.com Apple when I can't access the account losmail, but the appleid.apple.com tells me that I need to check this email address.

  Best regards

  Philippe

  Hi phillla,

  Thanks for all the details with your accounts.

  Can be difficult to have more than one Apple with several e-mails all mixed together.  If an email is used with another Apple ID, for example, that e-mail can be used to create a new Apple ID or rename an old.

  The analysis of what you seem to have however...

  Your purchases are with your *@losmail.no Apple ID, but the emails for this go to your *@gmail.com email address.

  *@gmail.com is the primary e-mail address for your Apple ID *@losmail.no.

  You can connect to iTunes or manage your page ID with *@gmail.com Apple says it's an Apple ID on its own.  As an email address can only be verified for an Apple ID, which means that he must check with your *@losmail.no Apple ID and cannot be verified with *@gmail.com.

  You say you can not connect on appleid.apple.com with *@losmail.no you will need to check the email address.  You have a relief attached to this ID e-mail? This is the email that would be used to recover.   You receive your check or reset email - Apple Support

  Bottom line, you want to change your primary Apple ID but outdated to *@losmail.no to *@gmail.com, you must first rename *@gmail.com to something else and delete this email of all codes from Apple as well.  Then follow the link above to get access to *@losmail.no and control so that you can rename it.

  Best regards.

• SMTP problem with the recipient's address

  Hi, I made a copy of the function of SMTP Email message send to use it with another port smtp (as 587). Everything works well when the recipient's address is like [email protected] or any what normal address. The problem is when I'm trying to use this function to send an e-mail to an address like [email protected]. Each email to the address of the company is like the second example. Does anyone have an idea to solve this problem?

  I had the same problem with my mail server @msu.edu.

  The problem is that many companies use TLS or SSL security settings.

  There are ways around this problem.

  I have attached a VI that should work for you.

  I can't take credit for the VI, it was given to me by a person on the forums.

  I've just modified it a bit.

  Edit: If you look at the block diagram, upward, there is a node to invoke.

  It's for "SMTP Client", and the element is "host".
  You will need to change that to 'mail.msu.edu' to any server used by your company.

  And you may need to change the port as well.

  I also customized the VI icon, but you can leave if you like it

• problems to renew the ip address on the windows xp desktop

  I have a dell Windows xp pc.  Internet has always worked well. I have att dsl, my modem is motorola router and cisco/linksys e1000 (crappy system). before I had the 2wire, which worked FINE. in any case, it was an original idea upgrade att I followed the instructions to the letter for the installation. the internet works first via an ethernet connection. then, I installed it on my laptop (wireless) then proceeded to all new via of branch instructions. Once everything was connected wireless connections work fine, but the Office does the same to me 'renew ip' as the other readers. I'm tracking info centres of knowledge re renew ip address, nothing will do. I have mse for safety. I have the cc cleaner that nothing works.  Thanks for all the suggestions.

  Hi kattfenom,

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• The problem of creating an extra address in Outlook Express.

  I have a problem, create an additional address in Outlook Express. This question arises because my ISP has recently changed from Tiscali to Talktalk. I find that I have to use the old tiscali for outgoing mail smtp server, but I can't receive mail if I use the server talktalk or tiscali. Any advice?

  Discuss with the technical support of Talktalk. The problem would be the same if you use Outlook, Thunderbird, Eudora, etc and is not a matter of OE. They don't did you not the correct settings. Ask to speak to a technician level 2 If you do not get satisfaction.

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad

• Unable to solve a problem with internet connection (IP address conflict)

  Recently, problems began to appear on my Windows 7 Ultimate based laptop from dell on my internet connection. yesterday, early signs of trouble appear as inconsistent internet speeds and sudden incapacitation of Youtube to play or buffer video. Since then, Internet connection still exists and I am still able to actually go online, however, my YouTube maintains do not load, showing "an error has occurred, please try again later" on each video, in the middle of a black screen. Then, windows began to frequently display the message "Windows has detected an IP address conflict - another computer on the network has the same IP address as this computer. However, the system itself not provides me with options to do anything to solve the problems, and option 'Diagnostic' of the network connections window nothing pick up. To see if this error is only on my computer, I've put together several computers and after you connect to each of them to my wireless modem, all lead to the same question of incompatible connection and YouTube failed on them also. To prove it yet, I created a Wi - Fi hotspot using my iPhone 5 and to connect my computer, and all well worked, including youtube.

  I use google chrome for web browsing, but don't lie not this problem with chrome. I tried Safari, Firefox and Internet Explorer, and they seem to all fail the process of loading to youtube. Empty the cache, cookies and data seem to be useless.
  Since then, I searched high and low through the web for solutions to this issue. Unfortunately, many remedies such as the famous "ipconfig / renew" option has become completely useless. I have restarted my computer many times, tried to disconnect and reconnect the wireless adapter, tried unplugging all devices in the wireless network and even tried to connect to my modem and wait for a few minutes - several times. Apparently, all these ways, I found online and also experienced myself to fix this problem comes empty. Windows is still showing me that pop up and internet connection is clearly unstable.
  I'm running out of ideas and patience in research throughout the Web for solutions, at - he encounter the same problem and has found a way to solve? I desperately need help that it becomes uncomfortable. Thank you very much
  On a side note : all mobile devices, including the 920 Lumia, iPhone 5/4 s / 4, a HTC and Samsung Note he's connected to the internet without a hitch and looked good to load videos to youtube and Web sites.

  You connect to a router or directly to a modem?

  You can also update the drivers for your network card. It is usually best to visit the Web site of the manufacturer of the adapter, and download the latest driver on their part. You can also take a look at the following as which explains how to upgrade your drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

• Problem to get the IP address of the Client on ADF

  Hi all

  I use jdev 11.1.1.7.0 version

  In my case, I created a stubborn taskflow and deploy it to Webcenter.

  In this application I wrote the code for the customer as follows - ip address

  ExternalContext ectx is FacesContext.getCurrentInstance () .getExternalContext ();.

  HttpServletRequest request = (HttpServletRequest) ectx.getRequest ();

  String ip = request.getRemoteAddr ();

  but he returned

  127.0.0.1

  or in my env production he return server ip address.

  so my question is what is the problem with this code, why is not the ip address of the customer return

  or any other way to do

  concerning

  Manish

  This is a configuration on the weblogic server. You do not get the address of the default client. You must make a few changes to the configuration of your wls (see getting the IP address of the application client). If you do this, you should be aware of the implications that you find in the blog http://www.ateam-oracle.com/wls-plugin-enabled/

  Timo

• Ubuntu problem and get the ip address of it.

  Hello!

  I just have a problem that you see on the image, the server is started and it does not meet the internet or local network. and I do not see a window of the application 'samp3svr '...

  I am new to Ubuntu and hope someone wants to help me.

  Thank you!

  BTW, the internet connection on the Ubuntu VM works.

  I use Fritz WLAN! Box and helped host exposed to my pc

  screen:

  http://img35.imageshack.us/img35/1279/problemslc.PNG

  Hello.

  Are you just trying to find the IP address of the virtual machine Ubuntu?  If so, use the command:

  ifconfig eth0

  Good luck!

• ePrint loses email addresses allowed except my master e-mail

  Hello

  I opened my ePrint account and wanted to add addresses email who are authorized to print via e-print. I win and the dialog box displays all the addresses correctly.

  But when I connect again in ePrint and I want to check the addresses all are gone except my main address on behalf of HP.

  What could be the reason for this?

  Thank you and best regards

  Hanspeter

  Try the procedure described below a few users have reported success.  Let me know how it goes.

  1. connect to ePrint Center.

  2. click on the senders list and add the user as usual.

  3. click on save after adding the address-do not sign of ePrint Center.

  4. then send an email to the printer from this sender you just added.

  5. once the e-mail has been received by the printer disconnect and then come back in ePrint center and check the list of senders.

• I have problems with my e-mail address. I received a message from Pophm.sympatico.ca to tell me that I'm unable to send or receive messages

  It is said that my account has been changed to connect to my e-mail account which I don't remember it and it asks me to sign up with a password that I don't know. How can you help me. Thank you

  Hi Claude,.

  Thank you for giving us the opportunity to help you with this problem.

  According to the description of the number retrieve you messages from Pophm.sympatico.ca that you can't send or receive emails.

  I want to contact the simpatico support team for assistance. You can contact them on the link given.

  http://en.info.sympatico.ca/contact-us

  Do not hesitate to write us if you have any other questions. We will be happy to help you.

• How and why do I have problems accessing my E-mail address that you submitted a warning of an intruder, because a lot of information, I should receive has not been submitted to another address.

  My original Email address was in close linc warrioralan @ hotmail.com that I updated a number of years to the following:-warrioralan @ hotmail.co.uk.  I was given a warning from your home office to a possible interceptor, that I've separated it from a group of five emails.  However what I try to do by accessing my email address I am unable to get any satisfaction.  Police was inquire personally, as well as friends who I'm talking personally cannot understand what is happening as to why I'm being intercepted.

  Concerning

  Alan Curtis

  07970069152

  E-mail address is removed from the privacy *.

  E-mail address is removed from the privacy *.

  Hello

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

• Computer stuck on 'test mode' and is having problems of delay serious is not allowing me to repair my registry or even access.

  I have Windows vista home edition 32 bit and all of a sudden its stuck on 'test mode' and it only allows me to access my regristry editor or anything to do with regristry. If I am near him, it simply restarts the computer. This whole test mode is seriously lagging my computer, the CPU is really bad spiking constantly. Is there anyway that I can fix this? When it starts, I have to manually perform a new task to even run windows Explorer. as the bar of tasks and themes and other. So if there is anything that I can do, let me know. Thank you.

  I don't know how you could have accidentally in Test Mode, but here's how you are supposed to activate or deactivate the Test Mode: http://msdn.microsoft.com/en-us/library/ff553484(v=VS.85).aspx

  There is some experience about it in this article:

  http://blogs.msdn.com/b/ntdebugging/archive/2011/08/05/for-testing-purposes-only-and-other-desktop-watermarks.aspx

  It could be that it is a particularly nasty brand of malware. I have not heard of something like this before and do not know how you could go about fixing this short of reinstalling Windows. Even if it is maybe not enough if startup records were damaged. I hope someone else can help.

• Display problem of names in the address book correctly

  I managed to import my Outlook address book after mapping the fields apparently correctly, in particular to ensure that the first and family names are related to the correct fields. I find that they are not displayed separately but in a single column in the form firstname.surname. Can names be included separately so that I can sort by family name?

  Open the address book. In the menu, click on view: show the name as: last, first.

  It only will show it with last, first of all, but it will also sort that way now, as long as you have view: sort by: name ofvalue.