Similar Questions

• Problem after upgrade without fil.144 blackBerry Smartphones

  Hi all

  I just upgraded my storm using upgrade wireless installation, the system of my OS is maintenant.144.

  The problem I have is the touchscreen without locks properly when I use the lock button on the top left of the phone. It appears only half lock the screen because if I press the buttons main hard in the lower part of the screen unlocks. This didn't happen before the upgrade, I asked if anyone has the same problem

  I'm on vodafone UK network.

  Thank you very much

  Yes, everyone has this bug in niveau.141 implementation.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=9500&thread.ID=30447&jump=true

• Problems syncing notes app after upgrading to iOS 10

  Hi all

  I hear a lot of people having the same problem on the web.

  After upgrading my iPhone 6 s more and iPad Pro iPad 9.7 ", kept perfect notes that I saved in the Notes application (like my MBP / iMac too), while on my iPhone, I've known many sync problems and even lost notes and records.

  1. I tried to pass and on the synchronization of Notes in the iOS iCloud preferences, with a reboot between stocks. Nope. No synchronization, and when I turned on sync I lost almost all of the notes previously saved in my iPhone, so I now 15 notes instead of 175. This ONLY happens on my iPhone, while iPad / MBP / iMac yet.

  2 - I tried to create a new folder in my MBP or in my iMac, hoping to "stimulate" a new event to Resync through all my devices. Not for the iPhone, but synchronized on my iPad / MBP / iMac.

  3. today, I made a backup of my iPhone, reinstalled the iOS 10, then restored the backup.

  Nope.

  Any ideas, guys?

  Thank you

  Luca

  EDIT: actually sync problems seems to occur exclusively on the side of the iOS. This also includes the iPad. Fortunately, I didn't have the great idea to disable the synchronization of Notes in iCloud on my iPad, as I did on the iPhone.

  I'd lose certainly all currently stored notes in my iPad too.

• Problem of LTE connectivity after upgrade to iOS 10-SE

  Do not know if everyone knows this, but after upgrade to iOS 10 on my iPhone SE when I leave one area LTE and go to the services area or area No. less than LTE and re - enter a LTE area, I have no service. There is no service or reports 4g, but when I use an app, it says no network not connected. I tried all the usual stuff... Restored from backup, cleared cache, reset the network connections, did a hard reset, nothing works. The only thing that comes to LTE turns the phone then turn it back. All this experience? I have never had this issue before moving to iOS 10.

  I think you have the same problem described here:

  After briefly losing service, iPhone will fail to connect to the cellular network until you restart

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• Problem with desktop/taskbar after upgrading Fusion 4 to 6 - Windows 7 VM

  I got a few problems after upgrading to Fusion 4 to 6 with my Win 7 x 64 bit VM Fusion. I use a Mac Pro with the Mavericks. While I managed to resolve most of the issues with a manual installation of the VMWare Tools and reconstruction/reactivate a certain number of broken programs, there is suddenly a new which is serious enough. My office is not displayed, nor is my bar of the shortcut icons for the launch of the program tasks. I can access my desktop to the user manually folder and all the "stuff" is there. " If I run a program from the icon appears in the taskbar, but it cannot be pinned. When I access more nothing, I get this popup (see image). I'm sure that's the issue. Anyond can suggest a solution, please?

  Hello

  The network error is gone I hope?

  You have to set up folders mirrored under sharing with OS X? (Menu-> Virtual Machine-> settings-> sharing-> mirrored folders). If you use mirrored folders there, then what happens if you turn off this feature to test and see?

  I don't use this feature myself, but imagine that allowing a case mirrored for Office could eventually hide something on the side of windows.

  --

  Wil

• Problem with the smilies after upgrade to 7.23.0.4

  After the upgrade to 7.23.0.4 new Skype smileys (as (bhangra), (rabbit), (red) etc.) are not displayed in cats but only the words in brackets instead of them.

  Please, continue to release new versions with bugs!

  After upgrade to 7.23.0.105 all the smileys are displayed well.

  Even without disconnection/connection.

  Thank you!

• Problem with PCI-6704 after upgrade

  I recently upgraded from labview 7.1 to 8.6, at the same time I've upgraded to the latest version of the driver NOR-DAQmx, MAX and the existing drivers (7.4.4). After upgrading my PCI-6704 Board has stopped working. When I try to run the test panels I get a message "the device is not the test. Do you want to continue? "If I click on Yes, the test Panel opens and I get the message error in 10461. I tried to reinstall both daqmx drivers existing. I tried to uninstall both drivers and remove cards, restarting the computer, and then reinstall the new. I tried to install only the existing drivers and I get the same error. The pilots reset has no effect. I also tried switching PCI slots. I have a card PCI-MIO-16-1 and it works very well, and it works in a pci slot. Is there anything else I can try?

  I uninstalled the NOR-DAQ traditional 7.4.4 and installed instead of NOR-traditional DAQ 7.1 and everything works well again. Apparently there is something in the 7.4.4 update that did not like the PCI-6704.

• Problems with mail imap after upgrade of Sierra

  After the upgrade to Sierra, I can't sync my hotmail account in Mail.

  Before even the upgrade, I always had to change my account after each restart settings, as required for authentication SMTP and IMAP user name has been deleted. The same thing happens after the upgrade, but now when I enter the user name and press save I have error message say: A IMAP account already exists.  Only one IMAP account is allowed to be saved.

  Reming the account and recreate it does not help because I find myself in the same situation where the username is missing. Does anyone have any suggestions?

  

  The username field must my work email address and when I enter it and press on save, the error message comes.

  I am facing a problem as well with Mail on macOS Sierra: account sync not IMAP.

  I see that there are a lot of similar questions autour... hope they will fix soon!

  Even that when troubleshooting your...

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• [DV6-3140SL] Problem in my laptop after upgrading RAM

  Hi all,

  I want to upgrade the memory of my laptop HP DV6-3140SL model.

  Original RAM installed is a Micron 16JSF51264HZ-1G4D1, size 4GB.

  Then I bought 2 modules of the model Corsair CMSO4GX3M1A1333C9 (4 GB x 2 = 8 GB total)

  but when I installed this 2 cylinders in my notebook, start windows crashes;

  Sometimes I see Loading icon of progress, but immediately laptop restarts.

  BIOS recognizes correctly 8 GB and memory (the utility in the BIOS) test is OK.

  CMSO4GX3M1A1333C9 should has the same features as the original model of 16JSF51264HZ-1G4D1:

  SODIMM DDR3 PC3-10600 (1333 Mhz)

  What could be the problem? Incompatibility? Or faulty RAM memory?

  Note: NA is 8 64-bit Windows (W8 is an upgrade to Windows 7 original)

  Thank you for the support.

  Paolo.

  paolo220177 wrote:
  

  Hi all,

  I want to upgrade the memory of my laptop HP DV6-3140SL model.

  Original RAM installed is a Micron 16JSF51264HZ-1G4D1, size 4GB.

  Then I bought 2 modules of the model Corsair CMSO4GX3M1A1333C9 (4 GB x 2 = 8 GB total)

  but when I installed this 2 cylinders in my notebook, start windows crashes;

  Sometimes I see Loading icon of progress, but immediately laptop restarts.

  BIOS recognizes correctly 8 GB and memory (the utility in the BIOS) test is OK.

  CMSO4GX3M1A1333C9 should has the same features as the original model of 16JSF51264HZ-1G4D1:

  SODIMM DDR3 PC3-10600 (1333 Mhz)

  What could be the problem? Incompatibility? Or faulty RAM memory? Incompatible memory modules

  Note: NA is 8 64-bit Windows (W8 is an upgrade to Windows 7 original)

  Thank you for the support.

  Paolo.

  You must use the Configurator of Corsair compatibility on their Web site.

  See if you can return the modules. The modules seen in the image below are the only guaranteed compatible modules by Corsair. Unfortunately, they are not modules of 4 GB compatible to your laptop.

  

  Memory of Kingston, on the other hand, is it guaranteed compatible 2 GB and 4 GB modules of memory for your laptop. With Kingston, bars of memory, you can upgrade to 8 GB and do work correctly the first time you start it back up after the upgrade.

  

• Problem with Microsoft Office, after upgrade Windows 8.1

  Simple and straight to the point.  After the upgrade to Windows 8.1 my Office Home and Student 2010 will only work for 15 minutes after the installation, and then after that the logo for Word or Excel screen rises, opens ever, not useful to insert the disc, the execution of repairs, which reuqires reboot of the system, whenever I need to use Word or Excel.  Someone please tell me there is a simple solution for this problem.

  Victorymarketin, welcome to the forum.

  Since they are two Microsoft programs, I suggest to contact MS Service customer assistance.  They always took me and running in short order.  It's always my solution when I have MS related problems.  They if anyone can solve your problem.

  If your problem is solved, please click "accept as a Solution.

• HP Officejet Pro 8500 a A910a: problem formatting of printer after upgrade to Windows 10

  After the upgrade to Windows 7 to 10, some printed documents very well while others print in close columsns of 15 letters causing a document 1 page run 6 to 8 pages long and useless.

  I downloaded the latest driver from HP and used their diagnostic tests.  I used Windows Diagnostics.  They suggest no action.  I contacted Microsoft 3 times and technicians turned out to be unnecessary; It was suggested that finally back to Windows 7.  The printer works just great.  This printer is no longer under warranty.  I have a same printer which works well on another computer running Windows 10.

  I would like to know how to solve this problem caused by the upgrade to Windows 10.

  Wing wrote:

  I use Outlook.  Previews all looked normal.  I had problens with printing of emails but have been able to print a PDF document.

  Hi Wingtip,

  Please follow these steps to try to resolve the problem:

  1. open outlook

  2. double-click on the email address that you want to print (the email must open in a separate window)

  3. click on file and then print

  4. in the print window, select your printer and click Print below options.

  5. in the window options printing, make sure that the print style is set to memo, and then click Page layout

  6. click the paper tab, and set the margins to 0.50 '' on all sides. Also make sure the paper type and size is set to letter.

  7. click OK and then try to print.

  Please let me know if this helped.

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!