Problem of access connection T23 "create a profile"!
Hello all,.
I'm trying to configure the section profile. The 'Find the network' button does not respond. I even manually entered the SSID, and no other fields are to be filled. Version is 5.85. Have 'allow all users' checked to create profiles. I don't think I have all the other required software installed. All appreciated expertise.
Donald
donaldhh wrote: I don't think I have all the other required software installed.
Please check, if your installation is really meets the requirements - not only powermanagement - and hotkey drivers, but also the driver Lenovo wireless - version.
Tags: Lenovo Products
Similar Questions
-
Original title: temporary profile
I was wondering if anyone can help... I have a compaq laptop, windows 8 and the last few times ive turned on n signed in its took much longer than usual and connect to a temporary profile where it seems that everything I had there before such as files and photos have already disappeared. But it then opens with a message saying something along the lines of. . "You have been logged on with a temporary profile, in this profile, you can access saved files and any new tjing created or added to this profile will not be saved" does anyone know how solve this...
Hi Lucie,.
Activation of the built-in Administrator account can help get the problem solved.
Perform the steps suggested by Pinaki displayed from the link below and see if it helps.
Answer please if you have any questions.
-
my computer is the signature with a temporary profile and I can't access any of my files how to fix this?
Hello
Please post in the forums for your version of Windows.
Ask a question in a select Technical Forum here appropriate injector:
Microsoft Community - Forums
http://answers.Microsoft.com/en-usPlease provide all the information we need to help us help you.
How to ask a question
http://support.Microsoft.com/kb/555375=================================
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.
Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in
Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 - free methods system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty to a Vista - corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileDifficulty to a corrupt user - Windows 7 profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
Impossible to edit or delete profile access connection 5
Hello world!
I'm unable to Edit or remove the profiles of dial-up connection on my T41 running the last login v5.
The change and remove buttons in the login profile menu are indicated only in light grey color, and it is not possible to click on them. I have administrator rights on my machine. These profiles were initially migrated from a very old v3 (automatically during the update of the system), and I guess that's one of the causes of the problem.
I also tried to use the QCTRAY. EXE/delete, but this command does not work also. Profiles just remain unchanged.
I would be very happy if someone could give me a hint on how to overcome this annoying problem.
Best regards
Helmut
v3 profiles are not compatible with the v5.
The best solution in your case would be to uninstall access to profiles and then reinstall and create new profiles.
-
I have a problem of "Secure connection failed", access to an HTTPS site.
I have a problem of "Secure connection failed", access to an HTTPS site. It is of this type:
Your certificate contains the same serial number for another certificate issued by the certification authority. Please get a new certificate containing a unique serial number.
(Error code: sec_error_reused_issuer_and_serial)
OK, I have not read the support article carefully enough - it even says that this dialogue cannot be exceeded by adding an exception.
you are most likely right that this problem arises because the same cert is used for different sites. this support article describes a work around, but it is probable, not applicable to your situation, since you would also have to remove the certification authority and which would create all sorts of problems as your production site will tend to choose an a valid CA certificate.Please contact your IT department or the problem of certificate on two different servers or to allow you to run a version of portable firefox where you can mess with the certificate store and the authorities of trust in order to access the test server.
-
Original title: problem with Internet connection sharing
my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter
in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICSthen the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".so, I'm a person answer in this forum' Obtain an IP address automatically is the wrong setting on the Ethernet connection. " To return to the sharing tab and unshare the wireless connection. Close all windows network, and then open them and re - share the wireless connection. Who must configure IPv4 for the Ethernet connection properties for:IP address: 192.168.0.1
Subnet mask: 255.255.255.0
Default gateway: no
"DNS server: none.I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IPand made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have createI tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.
What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settingsBut why after I restart my PC, this problem comes...someone knows how to help me with this problem?Hey, Mimbs,
You can try the similar thread to the next with a possible solution:
Also for reference:
-
Connected with the temporary profile "I can't access all the windows apps or my personal files.
OT: Connected with the temporary profile.
When I log on my ASUS laptop, I tells me that I am being logged on with a temporary profile. I can't access windows applications or my personal files. It started after my laptop suddenly stopped while on internet explore. According to the event log, event ID 4608 created a change of security status and it is logged when LSASS. EXE starts and the audit system is being initialized. Is there anyway to stop this temporary profile/access and return to normal use?
Many things in Windows Vista and Windows 7 is still applicable to Windows 8.
Difficulty of a corrupted user profile
-
Problems with access to Web sites in the laptop of my mother, both wireless and ethernet connections
Original title: Internet issues
My mother's laptop has suddenly stopped to access Web sites. I tried to explore, Firefox and Chrome using both wireless and ethernet... connections we both century link and I tried the two houses... my works laptop on both networks. All three browsers connect to the internet, but not all pages opens. I ran the store and he told me that I should look online for more help... which is not the case, but it cannot determine the problem. Any ideas?
Hello
Welcome to the Microsoft community.
I understand that you have a problem with access to Web sites. We apologize for the inconvenience caused to you and appreciates your efforts to try to resolve the problem.
I would like to know the details below to help you better
- Do you receive an error message/code when you access Web sites?
- Do you think that any symbol with exclamation on the icon of this internet access on the taskbar (right)?
I ask you to try the steps in the Microsoft Help article below and check if it helps.
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7
Also I ask you to reset TCP/IP and check if it helps.
How to reset TCP/IP using the NetShell utility
http://support.Microsoft.com/kb/299357/en-usKeep us updated on the issue to help you better.
-
Hello
just a quick,
TOPOLOGY
ASA isps1 - 197.1.1.1 - outside
ASA ISP2 - 196.1.1.1 - backup
LAN IP - 192.168.202.100 - inside
I have configured Tunnel on the interfaces (external and backup), but is to link both legs public to serve a thare as redundancy for vpn users and users of the vpn tunnel leave pointing inside IP whenever they want to establish vpn sssion, we want it to be one, so if an interface fails vpn users will not know , but he will try the second for the connection. instead of creating the profile for the two outside of the leg on the vpn client.
is this possible?
Hi Rammany.
In your case, you have only an ASA that connects with 2 ISP in another segment IP... 196.x.x.x (Link1) & 197.x.x.x (Link2). What your condition is you want to have the VPN client who must be consulted with backup. If 196.x.x.x link fails, it should automatically take 197.x.x.x link. That too we should not have the config set in the VPN client backup server. You don have the possibility of having standby active also in asa single.
I think n so it will work with your current design.
This option is if your VPN client supports host name resolution (DNS). You can have the VPN created for both the public IP address share the same host name keeping the bond as the primary address 1 and 2 a secondary address. It will work alone.
Hope someother experts in our forum can help you with that.
-
MAJOR ISSUE: ThinkVantage Access Connections for Windows Vista causing the range problems
Community salvation and Lenovo,
He took a whole day to stem actually happening. Note: That there is no discussion on the software or defective equipment: my equipment is working properly. All the software has been uninstalled and installed properly. I would like to highlight: (read on to find out why)
THE PROBLEM IS CERTAINLY: ThinkVantage Access Connections for Windows Vista.
Hi Ran,
Thank you!
I have not yet tried.
In the meantime I did several tests and discovered that even with only Power Manager version 2.41 has installed the latest driver wireless Intel Pro, also supported by lenovo is not stabel and FN + F5 or windows network connection fails also to turn the radio back on to after a reboot when the radio is off Prime ;-(
Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283
again and again, I decided to return to the old driver wireless Intel on this page.
http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67256
Reinstalled ThinkVantage Access Connections for Windows Vista version 5.12
I tested it again... THIS MARKET!
Please try this combination:
BIOS version: 1.15
Bluetooth with Enhanced Data Rate software II for Windows Vista Version: 6.2.0.5000
ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62
Driver ThinkPad Power Management for Windows Vista, XP, 2000, Me, 98 Version SE: 1.52
ThinkVantage Productivity Center Pack Version: 3.02
Power Manager for Windows Vista Version: 2.41 has
ThinkVantage Access Connections for Windows Vista Version 5.12.
Intel Wireless LAN (11abgn, abg, bg) for Windows Vista API 11.05.0
Kind regards
Ritchy
-
Original title: I need help please.
I cannot access my store of windows and can't update all the windows applications not to mention that movie maker and photo gallery witch don't need to be updated. And because I can't access windows store I can't windows 8.1 update for my laptop. When I click on the app store window at startup it loads for a while and what he said to me, 'we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I check my internet and went into my settings to find something wrong with my connection, but I found nothing. So I did a few virus scans and found some malware on my computer. Then I took all the malware from my computer and still could not get windows store to open. I tried to download the updates to my computer and it wouldn't let me. How can I get my store windows to work and get my computer up to date? Help, please.
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
Read the link above and run the Troubleshooter "App."
-
Problem with access policies (create several resources)
I'm having a problem with access policies:
The first policy must create a resource.
And the following policies should create childs on the resource.
The problem here is that when the policies will add the childs, the resource is not configured yet.
And then each will create a resource but I want just a single resource of the childs.
When the resource is already deployed, policies to update this resource correctly.
How can I fix?
TKSRicardo,
I had a similar problem. In a post processing Manager, I managed the membership of the user to specific through the removeMemberUser roles and the addMemberUser of the tcGroupOperationsIntf class.
The last parameter of this method is a Boolean value that, if true, would automatically trigger access by programming strategies in post processing.
The problem is that there also is an OOTB handler for triggering access rules, so I was basically triggering twice access policies and duplicate resources appear.I hope this helps.
See you soon
-
I can't connect to my user profile, get the error "the profile Service service user filed logon"
I get the message; The user profile Service service filed the opening of session. Could not load the profile to logon.
Hello
The feedback forum is for feedback on the Forums for answers and no technical assistance.
This should ask in the answers – Windows Forums for your version of Windows.
Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows===================================================================
It's for Windows 7, but Vista is very similar.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
"you have been connected with a temporary profile.
I can't find the words to express the degree of anger with microsoft! I use W7 for a few weeks and just started getting the message "you have been connected with a temporary profile" and lost everything that was on my desk (shortcuts application, saved files and settings). I scoured internet (including MS help/support/etc.) and found the HUNDREADS of comments on this problem but with NOT a SINGLE solution that works and WITHOUT EXPLANATION of why or how it happened. This simple question is W7 TOTALLY USELESS and I'm trying to figure out how to recover my money on buying. If I could get my hands on the neck of the W7 developers, I'd be more than happy to squeeze the @$ % # out of them and they could keep my money. It's PATHETIC and a technology CRIME! All comments with a value of manufacturing?
Hello
Data is not lost and is accessible from any ADMIN including the hidden Admin account.
Check the C:\Users\Your user name.You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
6.23 access connections wrote dangerous registry key
ThinkPad W520 4282-A23. Win7-64; 6.23 access connections
Connections to access profile (slightly simplified) environment:
1.) office LAN: Ethernet; DHCP environment full
2.) home LAN: Ethernet; (192.168.2.8) fixed IP address; Router (192.168.2.1) DSL is the DNS server and default gateway and is also a DHCP server (mainly for WLAN clients, but will also answer on cable). All ethernet customers have a fixed IP address to allow independent operation of the DSL router.
Note: Automatic localization is enabled IN the configuration of the CA.
Scenario of the (repeatable) error:
(a) of operating successfully the Office LAN profile: office's LAN disconnect AC
(b) stopping of the system
(c) starting system (disconnected ethernet cable at home;)
(d) connect ethernet cable:
Access creates the "Name Server" registry key with value 192.168.2.1 in the registry HKLM\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces\ key {...}, where {...} is the interface instance related to connections to profile 'Office LAN' (in this case: {9345B66E-EA2A-42AD-ACE5-03BE8E7FD63B}).
(e) AC connect to profile 'Home LAN' (works ok)
(f) AC disconnect 'Home LAN'
(g) system shutdown
(h) starting system (plugged ethernet cable at the office, in a docking station;)
(i) AC connection to the profile 'office LAN:
AC profile connection is successful, but the subsequent resolutions of name server fail. The system has received a full installation of DHCP, including name servers in the DhcpNameServer Key. However, the key 'NameServer' existing still in step d) above obviously outweighs the DhcpNameServers servers. As server names still points to 192.168.2.1, all name resolutions fail in the desktop environment.
Temporary problem solution: use regedit to manually remove the server from the registry key names.
I traced this down with ProcMon: Access Connections is the only process that never written in the key of the name server. More specifically (the call stack):
ACon.dll AcRegistry 16: SetRegistryValue + 0 x 93 0x902f803 C:\Program Files (x 86) \Lenovo\Access Connections\ACon.dll
17 ACon.dll AcSMBIOSHlpr::IsMasterSwitchExist + 0x21a5 0 x 9034895 C:\Program Files (x 86) \Lenovo\Access Connections\ACon.dllI can provide more data on request.
I called Lenovo support. They said that ThinkVantage programs are not taken in charge.
The assistants here who can cast a magical spell?
After the latest Microsoft Windows updates, from January 15, the problem disappeared (with GIC760WW still installed).
Maybe you are looking for
-
System indicates 4 GB using 8 GB of RAM under Vista
* original title - do not use the full amount of RAM? 64-bit OS *. I have 8 GB installed in my PC and they are from the same manufacturer.I am running windows vista Business x 64Runing (not more timed) 3.16 Intel processorand a 9800GT 512 MB Nvidia G
-
ENVY27: Failed to create a system recovery
My HP SW support prompted me to create a system recovery (after 10 months with the computer). I am trying to create a recovery on USB, but the accident of process in the creation of CD. CD Creator crashed in the files of the copy phase.
-
PLEASEEE SOMEONE CANCEL MY SUBSCRIPTION OF CLOUD TO ADOBE
I paid for a whole year, I should have been able to cancel this year in February. I thought they would stop my subscription because it has already been a year. BUT NO, they decided to renew and start to charge me again for another year? What what wha
-
Office creative cloud cant dissable on Packer
Hi allcan someone help me? I'm used to my user use CC Office aplication, but dissable menu unavailable. What should I do?concerningDeto