Issue of controller Xbox 360 (PC connection)

Greetings all I am new to any connection my Xbox 360 controller to my pc and ive met some problems, Ive downloaded the necessary drivers and programs for my controller 360 to connect to my pc but when I connect my conroller Xbox 360 Usb charger supplied with the controller wireless controller wireless, it does not pick up there. When I hit the guide button it goes right on my xbox 360

Great thanks for the help everyone. Looks cause im going to have to go buy a wired remote, I have a problem with my wireless controller where it does not load (when I conect the charger in the light control will be red for about 30 seconds then green shift, saying that it is charged when it is not.)

Tags: Windows

Similar Questions

  • Wired controller Xbox 360 connects to Windows 7, error: USB device not recognized

    Original title:-wired controller Xbox 360 connects to Windows 7

    Hey, I recently bought a controller wired xbox 360. And it does not connect to my PC. When I try to connect it says device not recognized USB. And in Device Manager it says it is an unknown device and that "Windows has stopped this device because it has reported problems. (Code 43) "I downloaded the driver from the software http://www.microsoft.com/hardware/en-us/downloads here and I also downloaded the MotioninJoy as an emulator, but the xbox 360 controller does not always connect." Is there a way to fix this?

    Hello

    1. did you of recent changes to the system before the show?

    2. do you have the receiver for the device to the XBOX?

    Method 1: Troubleshoot your XBOX controller.

    Follow the steps in troubleshooting from the link below and check if it helps.

    http://support.Microsoft.com/kb/908888

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    http://support.Xbox.com/en-us/Xbox-360/troubleshoot/accessories/controllers-remotes

    Method 2:

    (a) click Start.

    (b) access Control Panel, click on System.

    (c) click on hardware, click Device Manager.

    (d) open Device Manager and expand the devices with error code 43.

    (e) right click on the device and Uninstall the device.

    (f) restart the computer.

    Check to see if that fixes the problem.

    If the problem persists, I suggest that you follow the XBOX support link below for assistance.

    http://support.Xbox.com/en-us/

    In addition, check out the link below and check if it helps.

    http://support.Xbox.com/en-us/Xbox-360/troubleshoot/hardware/error-codes

    It will be useful.

  • How < I > completely < /i > reinstall a wired controller Xbox 360 on a Windows PC?

    I have a wired Xbox 360 controller, which I use on my PC and my laptop... Who is having trouble on the PC when the Vibration is enabled in games. (Among other problems)

    I read the other post, where the answer is that the bus power supply and motherboard were not powerful enough and is that which is at the origin of the problems, now I'm not saying I wouldn't totally rule this possibility, but I'm pretty confident that my PC must be capable of this (especially if my cell phone).

    I think my problem is to do the installation, because there was a problem during the installation on the PC...

    So that the Xbox 360 controller installed its drivers and what - not the first time I plugged on my PC, my friend offline security "do not pull the Xbox off the shelf" section of wire and an error, but the installation is complete. The controller has the same way as it does on the laptop, for example, the green ring just keeps blinking while on the laptop, he moved to the "Player 1" quarter. However, the feature (buttons and sticks) works well in games, crashing less vibrations.

    To be honest, I don't really care about the vibration and have just disabled in the game options, but I recently bought a game where I can not disable the vibration and so I can not use my controller with it. (sad face). That said, it would be nice to stop the flashing green light several times.

    I tried through Add/Remove programs but do not understand how completely remove everything if I do a fresh install.

    I don't know if there are any software is installed, or elements of the registry or drivers. But I need to remove what it installed so I can reinstall it without error.

    My title should have been no doubt: "How to completely uninstall a wired Xbox 360 controller on a Windows PC" since it is the part of the resettlement of which I have a problem with.

    Can someone help me?

    Thank you! (happy face with slightly concerned Front)

    Hello

    Method 1:

    I suggest you to see link and check if it helps:

    Connect a game controller

    http://support.Xbox.com/en-us/Xbox-360/accessories/connecting-game-controllers

    Method 2:

    See the link and check if it helps:

    Troubleshooting your Xbox 360 Controller for Windows

    http://support.Microsoft.com/kb/908888

    See also the link for Xbox support:

    http://support.Xbox.com/en-us/home

    I also suggest you to report the query in Xbox forums:

    http://forums.Xbox.com/?XR=shellnav

  • How can I get audio with my Xbox 360 HDMi connected to my HP 22bw monitor?

    I got this montor and I have my Xbox 360 to connect him with HDMI.

    I have a Turtle beach headset and I have this card that I used on my Tv with HDMI.

    Whenever I have plug this adapter into the monitor said that HDMI is not plugged.

    Is it possible so I can have these plugged in.

    It's the adapter.

    I fixed it. I just had to turn off 'Auto switch Source '. Don't know why it is was playing with her.

    Thanks for your help.

  • I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

    I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

    Plug it in and let the auto drivers install.  I use mine all the time.

  • Vista Media Center and my Xbox 360 extender connection

    Hi I have a problem connecting my xbox 360 and my windows vista media center. Everytime I try I get the message saying that it can't find the range extender and suggests that it is one of the following three things

    (1) the Extender is turned on and connected to the network

    It's on and it appears as an icon of the xbox 360 in my network on the vista machine and can connect to the internet, so I guess the network very well.

    (2) that the code is correct

    It's that I checked it about 30 or twice now.

    (3) UPnP does not work properly

    I guess that's the problem but cannot figure out how to solve. I have a BT Homehub router. I've implemented through active UPnp. I even tried to disable the firewall completely on it and on vista, it made no difference to the port forwarding doesn't seem to be the answer.

    Help please it is one of the main reasons I got an xbox 360 and vista

    Paul.

    Paul Bradbury,

    There are always a few things that do not exist to try, so we can solve your problem. Below you will find a link on your specific issue. There are about four troubleshooting methods that you can try. Please let us know if it worked for you, and if so what method has solved your problem.

    http://support.Microsoft.com/default.aspx/KB/932159

    Let us know if you additional questions or concerns.

    Carlos
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Receiver for wireless controller Xbox 360 to PC does not

    I've had my Xbox 360 controller for at least a year now and so far it has been working perfectly. But yesterday, I decided to visit my brother and took my Xbox controller and the receiver with me. I put them in a bag with a controller leads and additional third-party, got in a car to my brother's House. When I got there, we plugged the receiver to the PC, but the receiver does not light. In fact, the computer does even not recognize that a new device has been connected. The next day, I plugged it to my computer for the first time after leaving the House of my brother and it did not work this time either.

    Here is what I tried:

    • I tried all the USB ports available and may conclude that they have nothing to do with the problem. All ports operate as it should.
    • I tried on a total of 3 computers, and none of them recognize be plugged.
    • I uninstalled and reinstalled programs Microsoft Xbox 360 accessories nothing helps.

    In addition, my computer does not recognize an unidentified device, but I don't think that it has nothing to do with the problem at hand. I say this because, in an attempt to solve this problem, I thought it was the cause of it and followed guides to fix. None of them worked, but I did one discovered that when I uninstalled the driver and rebooted the computer: at the time of the restart, I didn't have the receiver plugged, but he always found an unidentified aircraft. This leads me to believe that the unidentified device is not the receiver, but something else entirely (I don't know what this could be good). However, I'm not a genius when it comes to computers, so I could be wrong.

    As three different computers don't recognize even not be plugged in, I suspect the receiver itself may have been damaged when I put the bag with the controllers and the receiver down in the car and refused to work because of this. However, before you start investing money on two new controllers/receivers/alternatives, I want to ask if there are solutions to the problem.

    Hi and thanks for the answer.

    However, additional speculation in recent days, I managed to find the problem. I peeked inside the receiver and discovered that, as I expected, some had been damaged which prevents operation of the receiver. Since then, I made some adjustments and got the spare parts and the receiver and the controller now working again.

    Nevertheless, thank you for help. In the event of more problems with the controller, I'll be sure to have a look at these links.

  • Problems of controller XBOX 360 using Vista PC

    I bought an XBOX 360 Wireless Controller to my PC which is Vista 32. It worked at first and now it does not work... There is a lot of ppl with this problem with no will... Please help?

    cuzandlisa,
    I have not had this problem myself.  But you might want to look at the troubleshooting on the Xbox site.
    This page is especially for the Xbox to the PC controllers:
    http://support.Xbox.com/support/en/us/NXE/hardware/accessories/accessoriesforPC/ControllerforWindowsList.aspx

    Hope that gives the info you need.  FYI: My first thought would be to uninstall\reinstall the driver.  Also make sure that your PC is up to date with updates.

    Windows 7 was not my idea, but it still rocks! Soli Deo Gloria!

  • Controller XBOX 360, used for mice

    OK... I just bought the game of the year Elderscrolls oblivion eddition and I bought a XBOX 360 controller to use considering how it is compatible with windows 7... Everything works great with one exception. The right analog stick on the controller is supposed to control the movements of camera but it does nothing, so I have to resort using the mouse which can be quite the pain. How can I set the analog stick right to act like the mouse to control the camera? Its very important and any help will be greatly appreciated.

    I think he was looking for the Oblivion controller settings.

    Try this site and scroll down to Game Pad feature
    http://www.Elderscrolls.com/downloads/updates_patchnotes6.htm

    Good luck!

  • Xbox 360 slim connect to the interface on WRT160N wireless - g

    Hello:

    I bought a new Xbox 360 Slim a month ago. Before that, in anticipation of the console to my new wireless capabilities I advanced and changed my old WRT54G (1.1) for a wireless-N router WRT160N allowed.

    When I plugged the console for the first time it was a nightmare to configure wireless settings... It wouldn't connect, in every possible way... And when I finally made a connection that he deleted just after 1 hour (I think it had something to do with the renewal of WPA key, if you must ask) I've updated the firmware and all was good again. BUT! It only connects to wireless-G... I have the router located on 'Mix', so she accepts my notebooks 802.11 G and my 360 Wireless N, but just, it detects the router mode G and connects like that...

    I tried EVERYTHING, but nothing works.

    It connects fine, I even get open NAT on the console and play online with no apparent problems, but I need Wireless N, because the router and 360 are too separate, and the signal is becoming weak. Also I usually stream 1080 p content so I need more bandwidth.

    I tried setting that "only wireless n" router, but then the console just does not connect, says he "can't connect to the wireless hardware.

    I could not test any hardware wireless-N, so I don't really know if it's the fault of the router, the console or is that just, they are not compatible...

    Any tips?

    Can't... My only two options are 'automatic' or 'only 20 Mhz'... :/ I can only change the channel on 20 Mhz. But thanks for the tip.

    EDIT:

    OMG, I can't believe it... It is NOT a malfunction N wireless network... This has to do with security... I had my personal WPA authentication method... According to joint works like a charm and everything connects, but the Xbox connect just the wireless G. Under Wireless-N only, it just does not connect. But I tried to disable security, and he comes to connect n wireless!

    Now, I switched to WPA2 Personal... it connects perfectly on Wireless N even if I set the 'Mixed' router and broadband radio and the way to the car.

    My problem is solved, however, I got to know is always:

    Why he doesn't connect WPA enabled?

  • WRT120N to Xbox 360 Wireless connection

    Hello

    My wrt120n worked perfectly with my xbox 360 until two weeks ago. I can connect to xbox live without problem but unplug it always within 10 to 15 minutes, my PC doesn't have this problem.

    My SSID and WPA2 Personal are correctly configured. I have forwarded ports 53-3074 Beach, yet I always disconnect. My NAT is not upward too strict or moderate. When I look at my network on the 360, it abandons the connection entirely for about 3 seconds and it finds automatically. My IP are staticly Setup. My firmware has been upgraded.

    Any advice would be appreciated.

    My 360 has been positioned behind my PC from my router and was causing the outcome that seems. Anyway, problem solved, no shit was due.

  • You can use two dongles Microsoft Xbox 360 to connect 8 remotes Xbox 360 to PC?

    I wanted to just connect 8 xbox 360 remotes for sports games and most of all the 8 beast gang called fighting game player.  Have a dongle that works very well, but you can connect 4 to a dongle. If I had to buy another dongle I would be able to connect four more? Thanks for your time guys.

    Yes, if you can plug two dongles at the same time. You would need more than a port, so it may or may not be, but if this is the case, it will work.

  • How can I get my xbox 360 to connect to my pc

    I want to get the enternet play my games with my friends

    Hi Howard,.

    If you want to connect your Xbox 360 console to Xbox LIVE and you do not have a router, you can connect your console to your Windows computer and use his internet connection

    Click on the link below and see that it helps.

    http://support.Xbox.com/en-in/Xbox-Live/connecting/win-computer

    Good day!

    Please get back to us if you have any questions.

  • problem of controller Xbox 360 windows

    Hi Tomas.

    Please go to the Microsoft Community Forums.
    We are sorry that we are not able to access the link you gave.
     
    So, if you could answer a few questions that would help us resolve this problem:
    1. is this a wired Xbox 360 controller or wireless?
    2. do you get an error message?
    3. What is the exact problem you are facing with Xbox 360 controller?
     

    Here are some ways you can follow to resolve the problem:

     
    Method 1:
    Run the hardware and devices Troubleshooter
    Check out the link:
     
    Method 2:
    Uninstall and reinstall the drivers for the Xbox 360
    Check out the link:

     
    Method 3:
    You can check if the below article assist, you configure the device correctly-
    http://support.Xbox.com/en-us/games/Xbox-controller-for-Windows-Info
     
    Also you can check the link below for assistance:
    http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx
     
    I hope this helps. If the problem persists, please email us with the exact details of the question and the answers to the questions above so that we can better help you.

    1. it's wireless

    2 NO.
    3. the right analog is drifting upward without touching the cushion
    I have try all methods and have no idea what to do: /.

    FOR ANY XBOX PROBLEM:

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

  • Unable to get controller Xbox 360 on Run

    Basically, this does not work, and I don't know why. Here are the basics:

    With the rechargeable pack wireless controller

    Windows 8

    Dell Inspiron with 6 GB of RAM and dual core 2.5 GHZ

    Program that runs in Windows 7 compatibility mode

    The controller can be found in devices and printers as "Wireless controller for Xbox 360 with plug-and-play charge kit", but it is not detected by Micro Sofy Xbox 360 accessories. Circle button on the controller has 4 lights flashing instead of one as usual.

    I tried several controllers, and both have the same problem. On one, however, they illuminate the room and charges are red and the other green.

    I tried to reinstall the program.

    Any idea? Don't want to hit twenty clam down at least for a PC controller.

    Hello

    Check with afterglow and technical support Xbox and their forums.

    The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
    If you need to contact them.

    With the help of the joystick Xbox 360 for Windows
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

    Set up your Xbox 360 for Windows controller
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

    Troubleshoot your Xbox 360 for Windows controller
    http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

    For most of the problems of Xbox:

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    Opening hours: 600 PM 2200 h / Pacific / daily

    International (direct line in the U.S.): 425-635-7180

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for

  • Beats Audio missing probably pilot [Hp Envy dv6t-7200]

    Hey,. I recently downgraded from Windows 8 for Windows 7. Since then, my Beats Audio works closely with the lower quality (not like the charge and I don't see notification of volume when I press the hardkeys for more top/more low volume.) I guess I'm

  • HP model #A6000n Bios Checksum error after update Bios!

    I did update the Bios posted on the Hp website... After the reboot, all I get is this error, "BIOS Checksum Error", the black screen then looks for a boot diskette drive (this computer has not), then it looks for a boot on the CD drive disc.  Now, I

  • iPhoto retains close on its own

    Clicking to open iPhoto, it opens and remains open only for 2-3 seconds maximum. Then the dialog box saying: iPhoto quit unexpectedly (click open to open the application again. Click report to view more detailed information and to send a report to Ap

  • Recovery of password for the mail Client

    How can I recover my password to my Gmail account Outlook, Outlook Express, Exchange, Mail, etc. I forgot, and given that my clients receive my gmail, google refuse to believe that I have no problem.

  • I did a restore to when my computer ran right. Several different errors now show

    Original title: I did a restore to when my computer ran good... now, I do not receive either where... I need help I don't remember when the last time was this computer ran right... I did a system restore to what computer ran from... now gettting lnk