Problem of formatting dialog

Similar Questions

• problem of formatting Micro SD HC card

  Hello

  I ' have a problem to format my micro card.

  When I want to the appearance of card shaped this error

  

  guys help me please

  good luck to all

  Yes. You click on the link in my answer and follow the advice given?

• External hard drive does not work. Is there another way I could solve the problem without formatting the external hard drive?

  My external hard drive works. I tried to plug and when I tried to open it, it says to format the drive until I could use it. Everything works well as when I plugged the USB icon shown on the screen. When I check the disk management, it showed that the partition of the drive is there.

  I tried to change the drive letters, but still having the same problem. I also tried to run the disk check on the command prompt and the properties of the drive, but it still can not because there is error popping up saying that the disk check cannot be performed because Windows cannot access the disk.

  Is there another way I could solve the problem without formatting the external hard drive?

  I tried the first step in troubleshooting the hard drive, but it gives a
  error in saying that "hardware changes might not have been detected.

  So I tried the second method, and when I click on the "Check now" button his
  gives an error saying that "the disk check cannot be performed because .
  Windows can not access the disk".".

  So is there any other way or option?

  Thank you

  Jason

• Problem of Format DVD, convert VCR DVD

  I am convert family videos to video tape to DVD using a Toshiba DVR.  I want to make copies of these using my laptop (Sony Vaio, Windows 7).  I copied some files on my hard drive and then burned a DVD using Windows Explorer.  The burned copy would not play on my computer or my normal DVD player. When I try to burn a disc using Windows DVD Maker, Windows Media Player, or Windows Media Center, they would not even recognize the data were there (a problem of format?). But Windows Explorer I would like to burn a disc. I can play the video file that is in my hard drive using Windows Media Player and Windows Media Center, so there is something that the computer recognizes. Why other DVD players cannot play these files?  What is a format problem? From what I can tell they are. IPO or. BUP or. VOB format. There was some error messages about the codec used to compress the file. Could this be something to do with the format or how my machine is burning the disc? Or, more likely, this is the format the Toshiba Burns videos from the video tape?

  I am convert family videos to video tape to DVD using a Toshiba DVR.  I want to make copies of these using my laptop (Sony Vaio, Windows 7).  I copied some files on my hard drive and then burned a DVD using Windows Explorer.  The burned copy would not play on my computer or my normal DVD player. When I try to burn a disc using Windows DVD Maker, Windows Media Player, or Windows Media Center, they would not even recognize the data were there (a problem of format?). But Windows Explorer I would like to burn a disc. I can play the video file that is in my hard drive using Windows Media Player and Windows Media Center, so there is something that the computer recognizes. Why other DVD players cannot play these files?  What is a format problem? From what I can tell they are. IPO or. BUP or. VOB format. There was some error messages about the codec used to compress the file. Could this be something to do with the format or how my machine is burning the disc? Or, more likely, this is the format the Toshiba Burns videos from the video tape?

  =========================================
  Trying to copy DVDs by extracting the files, converting them
  compatible formats and the use of DVD authoring software
  to burn on DVD can be a lot of time, problematic
  task.

  What if all you want to do is to copy the DVD created by the
  Toshiba DVR... See the following simple solution.

  The freeware ImgBurn can create an ISO Image
  that allows to burn copies. Once you have the
  image created... you can use it to burn as many copies
  as you need.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Ignore most of the download buttons and click to the left of the
  green circle with the white arrow... He says...
  «Click here to download»

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  And... Once you have your ISO files created... they
  can be played on your computer with free software
  VLC Media Player. Just right click an ISO file and
  Reach... Open with / VLC Media Player.

• Will have problems of formatting of disc for burning.

  I can't format the drive to burning.windows telling me that she does not confess disk.when I insert the disc, a dialog box is supposed to fall down. This isn't.

  What is the answer?

  Hello

  You can check the link below and run the fix to resolve the problem with the CD/DVD.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  For more information about burning a CD using active file system click on the link below.

  Burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

• Problems of formatting of the new CD - RW and open/read/write in older CD - RW

  I have a laptop Compaq Presario C719TU, who has 3 years using Vista Home Basic with a Super Multi 8 x DVD + R/RW with Support Double layer Drive CD/optical .

  2 days ago, I bought a pack of 5 CD - RW (x 12 or 8 to 12 x speed) to back up data on.

  So, I put a CD - RW in CD/optical drive
  and I tried to format, using the (not mastered) Live file system on Vista.
  Try first, the UDF 2.01 (default) then later, the UDF 2.50 version to fit with.

  At the end of the formatting process, a dialog box appears on the screen indicating that:
  "Format disk - Windows was unable to complete the format."
  Why is this?

  When a CD RW is loaded in the CD/optical drive, it will appear in the desktop computer > computer (with the C and D drives and USB keys)

  But I'm unable to format new discs, (Verbatim 12 x speed) or run/open/view all the contents of old discs (TDK 4-12 x speed) I.

  - Or when a CD RW is loaded in the CD/optical drive, it will be a thready or whirring sound as it normally should.

  However, I loaded a DVD in the CD/optical drive and it took a little while to open, he managed to open the application on this matter.

  I tried to uninstall the DVD/CD ROM driver in Device Manager

  (Optiarc DVD RW AD - 7560 A ATA Device)

  then restarted the laptop, but it made no difference.

  I also 'deleted' (near possible uninstall) this lower filter for: {4D36E965-E325-11CE-BFC1-08002BE10318} HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ with of the registry - as suggested on a web page, but I haven't restarted laptop again to see if it has corrected or not.

  I have use/rely on CD RW to back up important files.
  

  Hi ordinateur.utilisateur,

  I suggest you try the fix it from the link given below and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ProBook 6470b: problems after format the laptop and load the W7

  Hi all

  Here are my problems:

  After 2 years using the laptop, I decided to format it and reboot with the disk W7 of professional origin.

  At the same time, I exchanged the original SATA HDD with a new SSD in Kingston.

  After you have installed all the drivers, it seems to work very well and much more quickly, but has two problems:

  1 - the automatic update of Windows does not work. Only is looking for available updates, but it ends, even > 24 h research.

  2. before reinstalling, my battery lasts for 5 hours. Now only 2 to 2.5 hours.

  Does anyone have any ideas on how to solve my problems?

  Thanks in advance.

  Ernest

  Good, glad it worked

  Have you had any success with the BIOS settings? Contact HP support directly for this may be a good idea here.

  Captain_WD.

• Problems of formatting with Satellite P25 2 GB SD card

  Dear members,

  Although I spent hours looking for an answer to the question above without success, I felt that I had to ask him once more. So, it's here (and sorry if this has been asked and answered already, maybe someone can tell me the right thread...).

  I have a laptop Toshiba P25-S5093, that was my serve. I bought it new over 4 years ago. Recently, I decided to take advantage of the embedded in my laptop SD card reader/writer. I bought a * _regular_ * SanDisk SD 2 GB (* not the HD - SD format *) and when I plug it in, I see the SD blue LED lights momentarily on my keyboard. I can even see that the _laptop reads the correct capacity of the card_ when I right click the icon. However, the system says that the card is not formatted and ask me if I want to format.

  Then, when I'm using the Toshiba format utility to format, it hangs for 2-3 minutes (I see the led Flash SD LED blue) and gives me the following error message:

  * TOSSDFMT: Unexpected error! Error code = 0x0340FF00

  I tried the quick format and a full format, with no success whatsoever. I exchanged for another 2GB SanDisk memory card, still the same problem.

  I downloaded the last SD formatting utility from Toshiba Web site (the latest utility driver looks old, it still 2003) and always without success.
  _Toshiba SD Card Format Utility Windows XP/2000 (v2.01.0; 09/09/2003; 1.75 M) _

  What is so intriguing is that both cards SD I've tried in vain on my Toshiba laptop, * work a lot on my brand new laptop working from another manufacturer *. * These cards are also fully recognized by my Canon or Fuji digital camera *.

  * If I use a USB card reader adapter, these cards are recognized by my laptop. This seems to point to a problem with the built-in SD slot or Toshiba driver / or Windows XP? *

  Notice to lovers? What gives?
  Thank you

  PS: or as a bonus question, what is happening with the warning of 'ready' or 'equipped' Bluetooth? I thought I had Bluetooth in my laptop, but I guess that's not so. Can someone explain to me * what are these BT stacks for * and how they align with what I have built-in hardware terms. Batteries BT BT "ready" but * no match *. I downloaded the following, but my virus detection was not happy with this file:
  _Toshiba Bluetooth Stack for Windows XP/2000 (v4.00.36 (T); 28/04/2006; 26.56 M) _

  David

  First P25 appears to be a mobile American, designed only for the American market.
  If you need information in this series, visit the Toshiba site us.

  One question; You are sure that the 2 GB SD cards are compatible and supported at 100%?
  Seems too large is not supported!

  > as a bonus question, what is happening with the warning of 'ready' or 'equipped' Bluetooth? I thought I had Bluetooth in my laptop, but I guess that's not so

  Did you find a Bluetooth label on the bottom of the unit?
  If not then this laptop has not built into the BT adapter!

  > Batteries BT would amount to BT "ready" but not equipped.
  Yes, a lot of series is not delivered with the BT module but can be improved!

• Problems of formatting of the new hard drive in Macbook Pro

  Hello

  My internal hard drive in my MacBook Pro mid 2012 broke down. So I installed a new hard drive a ST1000LM014 of Seagate 1 TB hybrid discs which according to IFIXIT.com must be compatible.

  I then boot the server Apple Macbook and party in disk Utillity to format the hard drive. The hard drive is visible and I'm then in the partition, choose the 1 partition, Mac OS X (journaled) + GUID. But while the partition that I get the error message failed to file system format.

  I tried different options in disk Utillity and I am able to format the disk using FAT or ExFat. But it does not help me to use my mac hard drive.

  Does anyone have any ideas on what to do? And it does not seem like a problem with the functionality of the hard drive?

  Thank you

  You must select the disk of material-name (upper, outermost level descriptor), not Volume name.

• binary file is open... problem with formatting

  Hi all

  It's probably too much time I don't use any more what Labview, but I have a problem opening the attached data file.

  It is supposed to be a matrix of 1000 x 316, with the whole of values up to 16-bit (65 k levels).

  In matlab I open it with fopen command and assigning the format as "uint16"...

  now, I want to create a quick Viewer in labview, but I can't go beyond the classic binary string...

  can you help me with this stupid problem?

  Kind regards

  Edo

  Is this what you need?  The result is an array of 1000 x 316 to U16s.

  

• Problem of formatting windows vista edition upgrade Home premium

  A few years ago I bought a pc custom made and also bought a version ledgit of windows xp media Center, with this, I also received a free uprade for windows vista home edition premium, I gave it some time before moving to vista (because of all the initial problems that vista had when he was releaeased).

  But now I have vista on my pc is for a year or two irratically running at least, so I desperately need to format my pc, I have read in various articles that once you upgrade to vista xp your original key to become obsolete, surely this cannot be the case, I paid full price for the Media Center program , and if indeed this is the case how do I clean my pc and reinstall vista on it.

  Thanks in advance for any response to my dilemma

  bigsi69

  This is your key to your XP license.

  You can wipe the computer and reinstall.

  It now part of the process to upgrade and stop install you on another computer.

  But you can use it to reinstall > then go back to Vista.

  If you have any problems, just call Microsoft and explain what you are doing.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem: lack of dialog of duplex in a Windows 8 (HP LJ P1102)

  Hello!

  I use HP LaserJet P1102 on Windows 8 Professional (x 64).

  When I choose "Print Duplex" mode in the Options of the printer, after priting starts there is no duplex printing dialog (for example, in a picture).

  So I can't use this mode and iniciate second part of printing pages.

  How can I solve the problem?

  Thank you!

  

  I'm sorry. Looks like I could have spoke too soon. Make sure that you have install the driver of features full printers. When I checked last, the pilot had not yet been made public, but it seems it is out. I'll link the driver below. Let me know if it works or not.

  Driver and software of HP LaserJet Full Feature

• Problem after formatting flash wlc 2504

  Hi people! I have had problems with the update of the WLC 7,0 to 7,2 image and made a BIG mistake... I had formatted the flash. So now, I have not installed on my WLC RTOS. The only thing I have is the bootloader 1.0.16. Of course, I can not install the code file (*.aes). I think I need a RTOS install first? but where can I get one for this unit? Or maybe I can install one of the RTOS of openwrt (for example) simply enter a line of normal control or web GUI, after I install (upgrade) the image normal .aes. Please give some suggestions what to do. Thank you!

  You will need to open a folder of TAC and the engineer can guide you through to the image on the WLC.

  Sent by Cisco Support technique iPhone App

• Problem with the dialog box displayed when the RadioButton is selected.

  It is an application with 3 buttons button1, radio 2 and output key that uses System.exit (0)
  The problem is with the dialogs first two buttons

  1. I open the application

  2 Select a radiobutton, I get a dialog box, I click 'ok', dialog will, that's fine.

  3. I choose an another radiobutton button1 or button2, I get the corresponding dialog, BUT know I have to click 'ok' twice to keep it alive.

  I don't know what could be the problem, here is the code:

  package com.thinkingblackberry;
  import net.rim.device.api.system.Display;
  import net.rim.device.api.ui.Color;
  import net.rim.device.api.ui.DrawStyle;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.component.PasswordEditField;
  import net.rim.device.api.ui.component.RadioButtonField;
  import net.rim.device.api.ui.component.RadioButtonGroup;
  import net.rim.device.api.ui.component.RichTextField;
  import net.rim.device.api.ui.component.Status;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.container.VerticalFieldManager;
  import net.rim.device.api.ui.component.PasswordEditField;
  
  public class HelloWorldScreen1 extends MainScreen implements FieldChangeListener, DrawStyle {
  
      protected static final int RED = 0;
      MButtons fullscreen;
      //protected RadioButtonGroup rbGroup= new RadioButtonGroup();
      public HelloWorldScreen1() {
  
          final RadioButtonGroup rbGroup=new RadioButtonGroup();
  
          setTitle("Application");
  
          RadioButtonField rbField= new RadioButtonField("RadioB1"){
  
              protected void paint(Graphics g){
                  g.setColor(Color.ROSYBROWN);
                  super.paint(g);
              }
          };
          RadioButtonField rbField2= new RadioButtonField("RadioB2"){
              protected void paint(Graphics g){
                  g.setColor(Color.SIENNA);
                  super.paint(g);
              }
          };
          RadioButtonField rbExit=new RadioButtonField("Exit"){
              protected void paint(Graphics g){
                  g.setColor(Color.DARKSLATEBLUE);
                  super.paint(g);
              }
          };;
          rbGroup.add(rbField);
          rbGroup.add(rbField2);
          rbGroup.add(rbExit);
          add(rbField);
          add(rbField2);
          add(rbExit);
  
          rbGroup.setChangeListener(new FieldChangeListener() {
              public void fieldChanged(Field field, int context) {
              if (rbGroup.getSelectedIndex() == 0) {
                  Dialog.inform( ""+rbGroup.getSelectedIndex());
  
              }
              else if (rbGroup.getSelectedIndex() == 1) {
                  Dialog.inform( ""+rbGroup.getSelectedIndex());
              }
              else if(rbGroup.getSelectedIndex()==2){
  
                  System.exit(0);
              }
  
              }
          });
  
      }
  
      public HelloWorldScreen1(long arg0) {
          super(arg0);
      }
  
      public void fieldChanged(Field field, int context) {
  
      }
  
  }
  

  I guess the event changed field is called twice, once deselection button1 and once to select button2. you pay your processing logic to account for this.

• Problem with custom dialog box

  I have a custom dialog box. The code goes here

  import net.rim.device.api.system.Bitmap;
  import net.rim.device.api.ui.Color;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.container.VerticalFieldManager;
  import net.rim.device.api.ui.decor.BackgroundFactory;
  
  public class CustomDialog extends Dialog{
  
      public CustomDialog(int command,String msg,int color,int alpha){
           super(command, msg, command,Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION), VerticalFieldManager.FOCUSABLE);
           setBackground (BackgroundFactory.createSolidTransparentBackground (color, alpha));
      }
  
  }
  

  I'm the caller to another class as follows

  CustomDialog d = new CustomDialog(Utils.D_YES_NO,"Do you want to exit",Color.BLUE,140);
  d.show();
  

  Its display very well and as I intended it to be. But the problem is that I'm not able to get the index of the choice to perform certain actions, such as

      int i=d.getSelectedValue();
  
                      if(i==Dialog.D_YES){
                          Dialog.alert("hi");
                      }
  
                      }
  

  Its do not call the dialog box, can anyone suggest me how to get the index of the choice that I chose to say YES or NO and to perform tasks accordingly

  Plese try suite

  CustomDialog d = new CustomDialog(Dialog.D_YES_NO,"Do you want to exit",Color.BLUE,140);
                  d.show();
                  d.setDialogClosedListener(new DialogClosedListener() {
  
                      public void dialogClosed(Dialog dialog, int choice) {
                          /*
                           *   // Field descriptor #211 I
                                public static final int YES = 4;
  
                                // Field descriptor #211 I
                                public static final int NO = -1;
                           */
                          int i=choice;
                          System.out.print("Selected Value :"+choice);
                          if(Dialog.YES==choice){
                              System.out.println("Selected Value : YES");
                          }else if(Dialog.NO==choice){
                              System.out.println("Selected Value: NO");
                          }
  
                      }
                  });
  

  If it is useful, please make as response and do not hesitate on LIKE button thanks