Problem of ink and printer? Office Jet Pro 8500 HP has

Hi I do not know if my printer does not behave as it should. My problem was that I have replaced the ink with new cartridges that had been hanging around for a year. I use those reconditioned. They seem empty cartridges but black on replacement that was totally fine - full. Considering that they were brand new and sealed in the course of the year and stored in a cool trunk of the sweepstakes and the black is beautiful I think it's strange. The printer however kept to work very well during the period that they were supposed to be empty - I've used them for about 1 month and turn off but not frequently. The demand of a portal replaceing may have been accurate as the ink was reduced on paper after this month.

Then, I bought new and put all at the same time. Too, they were recorded as having a tiny amount in them and one with none at all. Once again that black was complete.

The printer has become very strange because sometimes it would take 6 minutes and today 8 minutes to control standard boot "several minutes". Its seems now to clean the printer heads and align them each time and going in circles sometimes 3 times in total, as well as other normal checks. The printer not to protest what either one error other than the ink levels.

I wonder if my source of purchases can be a problem, or is the printer. I want to say that I am against the idea of genuine inks being the only consideration that re-controlled black inks are supposed to be true of the printer itself, although whether re-manufactured that works - but not the other colors.  I have it set to the factory settings under the part of the Tools menu. After that a re factory - set ink levels seem to have nothing bother it at all the same as before.

How can I check if the printer is fine if it seems it's already?

It's ink? It's the ink supplier? Estimates are just completely wrong, that is to say an eighth full (practically nothing) can mean full yet?

I have read the instructions and impliented checks but then I missed something or not doing something that the instructions asked me to do maybe?

Just to be clear, it could be there is a problem of ink repeated twice in a row to bad suppliers from 2 different though unlikely ebay sellers. If ebay buy bad providers to give us a cheaper contract, you have to ask yourself if. They maintain that the inks are high-quality XL stated that are totally compatible inks and good feedback from most of the customers. They are also the ebay powersellers so reliable with quality 99.8% feedback scores.

I think that the mechanisms are not perhaps how the printer heads join or the cartridges of printers join but don't really have a clue. The printer tell me that this is the case.

Should I uninstall the software on my PC and reinstall will this help?

I am confused, I must say - it can be very simple of course good sort.

Thank you all very much appreciated if you can suggest to me what to do that would be good?

Of what you mention about the power, here is a post I wrote to explain what is happening out there:

http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/power-supply-related-issues/TD-p/2184769

Regarding the cartridges, if they are genuine HP cartridges, they should all have about a two-year warranty. If you have a cartridge that is not compatible, you can contact our telephone support to have replaced. I generally recommend against the use of cartridges refilled or returned to nine, just to let you know. Of course, you have a perfect right to use and for many customers, they work perfectly well. But a number of cases in the past, I saw the formulation of the ink or incorrect fill methods cause damage in the printer itself. Also, cost-of-page-performance shows that these cartridges are not more effective than the product those HP. Just a word of caution here.

I saw before independent studies that have been conducted by consumer-reports-esque groups that show identical or similar results as our own internal tests. I recommend always to buy HP cartridges and if possible get the XL cartridges (they are more efficient and more profitable savings).

That is the information that you are looking for, or is there more that I can add to you? I designed on what you are interested in having more information.

Let me know!

-Spencer

Tags: HP Printers

Similar Questions

  • HP Office jet Pro 8500: INK for HP Office jet Pro 8500

    I installed the blue ink cartridge and is not blue print... I went to troubleshooting, aligned and cleaned the print heads. Printer unplugged for 15 sec, reconnected... No help...

    HI SharonH57,

    I enclose a document here that you may find useful.

    http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8500-all-in-one-printer-series---A909/3752454/model/3752455/document/c01980797/

    This document will show you want to print a diagnostic page.  It is important to check if you get a cyan on this page.  If there is nothing on the page - no cyan ink goes out.

    You may have a kink in a tube of ink - or your printhead may simply need cleaning.
    Follow the steps described in this document for more information.

    Jean

  • AnyConnect VPN and HP Office Jet Pro 8500 A910

    I can print from my laptop IBM T400 running Windows 7 64 bit. However, when I log in work AnyConnect VPN, I can't print. He says that the printer is disconnected from the network, even if it is connected. IT support at work said he can't change or adjust the VPN settings. The only way I can print is to disconnect from the VPN. Is this what I can adjust on the software of the printer or the printer itself?

    Hello

    To be able to print on the local network when you are connected to a network remote VPN might be possible by changing the VPN split tunneling configuration.

    However, it is depands on the VPN features and cannot be authorized because of the security requirements of your IT Department.

    Anyway, there is no way to configure such a thing by the printer or the printer software... It is directly affected by the configuration of the network and therefore require to modify VPN settings.

    Kind regards

    Shlomi

  • 8500 HP OFFICE JET PRO 8500 A909n error: B87126D0, unit will not turn off or print

    I'm having the same problem as described by others, "error of 8500 HP B87126D0, unit not turn off or print.

    I followed all the instructions from documeneted on this thread. I also replaced the power Module, in the hope that would solve my problem. I have an OFFICE JET PRO 8500 A909n PRIME

    Not sure why the solution cannot be posted here, as I see many others with this same error and the exact symptoms.

    Whatever it is, I really appreciate a solution 'private' as well.  Really, I love this printer and would rather not have buy another.

    Thanks in advance!

    Hello @rnegron57,

    Welcome to the Forums of HP Support! I see that you have found an error code on your HP Officejet Pro 8500 first, you are unable to power the printer on or off.

    You have completed the recommendations online without success, and you've seen other members of the community receive private messages. I would like you to take a look here: printer resets: What You Should Know

    I went ahead and you sent a private message, please go to your user page to the right of your name, you will see your Inbox.

    I'll watch for your reply, I would like to know the results.

    Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  • Office jet pro 8500

    My iPad is no longer connect to print from my hp office jet pro 8500 a printer

    Thanks for your replies; Since I was so impatient, I decided to reinstall the drive in my laptop again. I had a virus at some point and maybe uninstalled something. Whether, after reinstalling the hp disk I not had a problem. Thanks again for responding. I don't know that I'll need your help again.
    Sara099

  • Office Jet Pro 8500 won' t scan

    Help.  My Office Jet Pro 8500 scan is no longer.  I click on the printer icon and select scan.  It seems to be analyzed.  But there is no sign of an item scanned on my desktop which is where I selected the item scanned go.  I have a Macbook Air with OS 10.9.5

    It works!  Thank you very much.

    As you are a HP pro, maybe you can help me solve my second problem.  I have the HP Office Jet Pro 8500 connected to my Panasonic phone answering machine.  He used to work without fault.  When a call came, she was not picked up the appellant was able to leave a message. If a fax came the HP received the fax.  But recently, when a call comes in, the HP picks up, anticipating a fax, and the appellant was not able to leave a message.  Any suggestions?

  • Office Jet Pro 8500 in endless loop warm-up.

    I have a HP Office Jet Pro 8500 running on a network on Windows 7. Recently, my printer seems to go into an endless loop. When I turn it on, it says "warming up". He feeds then for a few seconds and then returns to heat". The printer then repeats this cycle without end I'd appreciate any help.

    The print head is until warranty, but I stil problems. I decided to buy a new printer with a WARRANTY EXTENSION. Thanks a lot for your help.

  • Office jet pro 8500 software for os 10.8

    I have a week I have Mac OS X 10.8 running.

    My not so new Office jet Pro 8500 910 a has a disk for OS 10.6.

    When you try to install the printer an error message is displayed.

    The help of HP suggests using the Mac update, but I guess as have not yet had time to do an update to the 8500.

    It doesn't seem to be a download again on the HP site.

    Any ideas on what I can do, and before anyone suggests, I don't want to buy a new printer!

    Well Yes, I recommend a few levels:

    1. the base drivers from Apple (at HP, in fact): http://support.apple.com/kb/DL907

    2. restart your Mac.

    3. download and install the full setting: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108394-1&cc=us&dlc=en&lc=en&os=219&product=4083969&sw_lang=

  • Office Jet Pro 8500 a menu on my PC has changed

    I have an Office Jet Pro 8500 has. The menu on my PC when I turn on the unit has changed. Before he gave me access to change the settings for photos, Scans, etc. and save these settings. There was lots of other options too.

    Now what I get is a Quick Menu on PC that does not allow me to do so much and can not save the settings. Were there an update that caused it? If so, how can I get that back?

    Does anyone else have this problem?

    Thank you

    Tony

    You are of the correct crime, there was an update for this software which has led to this issue.

    You will need to uninstall the current software that you have for the Officejet 8500 and reinstall with the latest drivers.

    Choose the appropriate driver for the correct version of 8500 a you have below:

    OfficeJet 8500 a A910a drivers
    OfficeJet 8500 has more pilots
    OfficeJet 8500 a Premium drivers

  • Printing Office Jet Pro x 476-extreme slowness

    From one day to the other, one of our Office Jet Pro x 476 begins to print EXTREMELY slow. There are no recent changes on the computers involved, I just noticed that all 4 cartridges are close to being empty (black to 25%, rest about 20%). There is no other problems with this printer and it still prints high quality without another problem (smear,...), but it takes more than a minute to print 4 pages (no matter if I print a letter in black and white or a photo in high resolution with all the colors).

    You have a new printer, the problem is solved.

  • Mac for printer Office Jet Pro 8600

    I have an IMAC desk top connected to an Office Jet Pro 8600, running MAC OS 10.6.8.  I can't scanner to scan photos to a specific size.   I use the HP utility but no matter what I try to do the witnesses only scanned image angle front right of the scanner glass.  How can I change the size of the JPEG scanner and how to scan some picture of the size that I place on the glass?

    Hi paul8588,

    Thank you for your answer!

    Here is a video, Scanning HP 8600 Series to Mac OS. This will show you what you see for your scanning options.

    I hope this clears up things and have a good day!

  • MAC OS 10.4 and printer Office Jet 6700 Premium

    You had to buy a new printer, Office Jet 6700 Premium. Networking Wireless with Windows PC, but cannot install Intel Mac Mini Tiger 10.4.1 running pre. Printer drivers are under MAC OS 10.5 and higher. Is there a work around? I try the installation CD without crashing the computer?

    Hello

    The printer is supported by OS X 10.5 and above, as you can see by the specifications below:

    http://www.shopping.HP.com/shopping/PDF/cn583a.PDF

    Try to set another pilot to get printing features and get a limited feature scan using Webscan via your browser.

    You will not be able to get all the features as the installation will fail on OS X 10.4

    1. In the Application's folder, go to the utilities subfolder and open The printer setup utility.
    2. In the printer list that appears, click Add.
    3. In windows, from the menu above, select default browser.
    4. Highlight the printer 6700 and spend the menu popup using Print .
    5. Select HP in this menu and then locate the HP Deskjet 6500 must fit into the operating system.

    To scan, use the feature of Webscan.

    You will need enable the feature of Webscan first:

    1. From Safari, type the IP address of the printer to enter the Web integrated printer server page.
    2. Enter the settings tab.
    3. Under Security, enter the parameters of the administrator.
    4. Check the box next to Webscan and click apply

    Now, you will be able to scan by accessing the analysis of SAP tab.

    Kind regards

    Shlomi

  • Digital control on Office Jet Pro 8625 display has become dark

    Control on HP Office Jet Pro 8625 screen became dark after I lifted the cover plates to copy a piece of paper.  No amount after pressing the reset button on the front of the unit allows.  Am able to print from the laptop connected fine.  How can I get the screen to control the light again to the top?

    Hi @our-HPand welcome to the Forums of HP!

    I understand that your display screen went dark.  I'd like to help!

    It may be a problem with the firmware, in which case we will need to be updated.  To make sure that we use the appropriate firmware update, I must first of all a little information. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

    Mac OS X: how to find which Mac OS X Version is on my computer?
    Operating system Windows am I running?
    Is the Version of Windows on my computer 32-bit or 64-bit?

    In the meantime, I recommend performing a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

    Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer. Thanks for posting on the HP Forums!

  • Office jet pro 8500 wireless/updated A910g

    Can I change to A910g A909g on my jet pro 8500 Wireless Office?

    No,

    HP Officejet Pro 8500 (A910) a is a completely different model than the model of 8500 Wireless (A909).

  • HP office jet pro 8500: hp 8500 a printing problem

    HP 8500 has ran the printer until it was completely out of ink, installed new cartridges, now, it will not be printed

    Hi sam-help,.

    Thank you for your answer!

    Check that all the steps in this guide have been completed, color or black ink not print. If this guide does not solve the problem, the next step is replaced the printhead.

    Please Contact HP phone support for assistance. They can check the printhead warranty. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

    I hope this information helps!

Maybe you are looking for